scholarly journals AN ITERATIVE ASSESSMENT CONCEPT FOR BUILDING DESIGN BASED ON THE ECO‐FACTOR

2006 ◽  
Vol 12 (1) ◽  
pp. 51-56
Author(s):  
Henrik Brohus ◽  
Erik Bjørn
Keyword(s):  
Energy Use ◽  
Building Design ◽  
Energy System ◽  
Design Guidelines ◽  
Office Buildings ◽  
Indoor Climate ◽  
Energy Efficient Buildings ◽  
Energy Optimisation ◽  
And Control ◽  
Indoor Comfort

Problems in office buildings are often related to the design and control of the indoor environment and of the building as an energy system. The often interconnected nature of the above two issues is important to take into account, since, for instance, internal and external heat loads, temperatures, and air change rates affect both energy use and indoor comfort. Thus, to avoid the indoor climate problems, it is essential that energy optimisation is integrated with assessment of indoor climate. An assessment concept based on the so‐called Eco‐factor has been developed; it can assist building designers in creating solutions of these problems. The assessment concept is meant to be an integral part of new design guidelines for office buildings, which aim to achieve energy efficient buildings with a good indoor comfort and low environmental impact. The building designers have different needs at different stages of the design process. For this reason, the assessment concept makes use of the Eco‐factor tool, which is defined so input can be based on both simple and advanced calculations in early and later phases of design, respectively, while still delivering the same output.

Closed-Form Correlation of Buildings Energy Use With Key Design Parameters Calibrated Using a Genetic Algorithm

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Raed I. Bourisli ◽  
Adnan A. AlAnzi
Keyword(s):  
Genetic Algorithm ◽  
Closed Form ◽  
Energy Use ◽  
Building Design ◽  
Office Buildings ◽  
Design Parameters ◽  
Wide Range ◽  
Variable Function ◽  
Real Coded Genetic Algorithm ◽  
The Difference

This work aims at developing a closed-form correlation between key building design variables and its energy use. The results can be utilized during the initial design stages to assess the different building shapes and designs according to their expected energy use. Prototypical, 20-floor office buildings were used. The relative compactness, footprint area, projection factor, and window-to-wall ratio were changed and the resulting buildings performances were simulated. In total, 729 different office buildings were developed and simulated in order to provide the training cases for optimizing the correlation’s coefficients. Simulations were done using the VisualDOE TM software with a Typical Meteorological Year data file, Kuwait City, Kuwait. A real-coded genetic algorithm (GA) was used to optimize the coefficients of a proposed function that relates the energy use of a building to its four key parameters. The figure of merit was the difference in the ratio of the annual energy use of a building normalized by that of a reference building. The objective was to minimize the difference between the simulated results and the four-variable function trying to predict them. Results show that the real-coded GA was able to come up with a function that estimates the thermal performance of a proposed design with an accuracy of around 96%, based on the number of buildings tested. The goodness of fit, roughly represented by R2, ranged from 0.950 to 0.994. In terms of the effects of the various parameters, the area was found to have the smallest role among the design parameters. It was also found that the accuracy of the function suffers the most when high window-to-wall ratios are combined with low projection factors. In such cases, the energy use develops a potential optimum compactness. The proposed function (and methodology) will be a great tool for designers to inexpensively explore a wide range of alternatives and assess them in terms of their energy use efficiency. It will also be of great use to municipality officials and building codes authors.

scholarly journals The Performance Gap in Energy-Efficient Office Buildings: How the Occupants Can Help?

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1480 ◽  
Author(s):  
Qadeer Ali ◽  
Muhammad Jamaluddin Thaheem ◽  
Fahim Ullah ◽  
Samad M. E. Sepasgozar
Keyword(s):  
Energy Efficient ◽  
Behavioral Interventions ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Office Buildings ◽  
Occupant Behavior ◽  
Energy Usage ◽  
Performance Gap ◽  
Energy Efficient Buildings

Rising demand and limited production of electricity are instrumental in spreading the awareness of cautious energy use, leading to the global demand for energy-efficient buildings. This compels the construction industry to smartly design and effectively construct these buildings to ensure energy performance as per design expectations. However, the research tells a different tale: energy-efficient buildings have performance issues. Among several reasons behind the energy performance gap, occupant behavior is critical. The occupant behavior is dynamic and changes over time under formal and informal influences, but the traditional energy simulation programs assume it as static throughout the occupancy. Effective behavioral interventions can lead to optimized energy use. To find out the energy-saving potential based on simulated modified behavior, this study gathers primary building and occupant data from three energy-efficient office buildings in major cities of Pakistan and categorizes the occupants into high, medium, and low energy consumers. Additionally, agent-based modeling simulates the change in occupant behavior under the direct and indirect interventions over a three-year period. Finally, energy savings are quantified to highlight a 25.4% potential over the simulation period. This is a unique attempt at quantifying the potential impact on energy usage due to behavior modification which will help facility managers to plan and execute necessary interventions and software experts to develop effective tools to model the dynamic usage behavior. This will also help policymakers in devising subtle but effective behavior training strategies to reduce energy usage. Such behavioral retrofitting comes at a much lower cost than the physical or technological retrofit options to achieve the same purpose and this study establishes the foundation for it.

scholarly journals A two family house built to passive house standard in the north of Sweden: environmental system performance

2017 ◽  
Author(s):  
Jonas Jonasson ◽  
Itai Danielski ◽  
Michelle Svensson ◽  
Morgan Fröling
Keyword(s):  
Energy Efficiency ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Building Materials ◽  
Energy Use ◽  
Residential Building ◽  
Building Design ◽  
Energy System ◽  
Northern Sweden ◽  
Passive House

A life cycle assessment (LCA) of a low energy / passive house in northern Sweden, including building materials and energy use is reported. The case study building is semi detached house for two families situated in Östersund (lat. 63°N), Sweden. Each apartment having a floor space of 160 m2 divided on two floors. The building was constructed during 2010 with a design meeting the requirements for Swedish passive houses as defined by the Forum for energy efficiency buildings (FEBY) and the Swedish center for zero energy houses (SCNH). When it comes to more sustainable buildings, energy use in the build environment has been in focus for some time. The life cycle assessment in this study reveals that the building materials can contribute significantly to environmental burdens of a residential building in northern Sweden. Energy efficiency, efficient use of good building materials and issues of appropriate design need to be discussed in the same context to move toward a more sustainable built environment. For energy efficient buildings in a energy system with renewably based energy carriers, building materials might give rise to a significant or even dominating part of the life cycle impact of a building. This give rise to considerations regarding choices of building materials as well as design of buildings to minimize such impact; while not forgetting social aspects impacted by building design.

scholarly journals Managing climate-change-induced overheating in non-residential buildings

2020 ◽  
Vol 172 ◽  
pp. 02009
Author(s):  
André Badura ◽  
Birgit Mueller ◽  
Ivo Martinac
Keyword(s):  
Energy Demand ◽  
Energy Use ◽  
Residential Buildings ◽  
Climate Extremes ◽  
Building Design ◽  
Climatic Conditions ◽  
Building Envelope ◽  
Indoor Climate ◽  
Climate Conditions ◽  
Outdoor Climate

Large and rapid climatic changes can be uncomfortable and sometimes hazardous to humans. Buildings protect people from external climatic conditions, and also mitigate the impacts of external climate extremes through their design and construction, as well as with the help of dedicated building service and other technical systems. Active space conditioning accounts for more than 30 per cent of the overall final energy use in Germany. In the life cycle of a building, the construction phase (planning and construction) is the phase with the shortest duration. However, the quality applied during this phase has a significant impact on the resources required, as well as the overall building performance during the much longer operational phase. Once built, buildings are often unable to adapt to boundary conditions that were not considered in the original building design. Consequently, changing outdoor climate conditions can result in an uncomfortable indoor climate over the lifetime of a building. The aim of this study was to determine the effectiveness of flexible solutions for reducing winter heating loads and to reducing/avoiding summer cooling loads in nonresidential buildings in Germany. Various external shading scenarios for non-residential buildings were analysed using the IDA ICE indoor climate and energy simulation tool. Key simulation parameters included the orientation and location of the building, as well as the envelope structure. We investigated the impacts of solar shading on heat storage in the building mass and indoor climate and how different types of envelopes affect overall energy use. The result shows that the use of an adaptive building envelope allows a higher reduction of the total energy demand by 7 % to 15 % compared to an increase in insulation thickness only.

scholarly journals Viewpoints on Environmental Assessment of Building Certification Method - Miljöbyggnad

2021 ◽  
Author(s):  
Marita Wallhagen ◽  
Jan Akander ◽  
Abolfazl Hayati ◽  
Mathias Cehlin ◽  
Björn Karlsson
Keyword(s):  
Climate Change ◽  
Environmental Assessment ◽  
Production Management ◽  
Energy Use ◽  
Ghg Emissions ◽  
Building Design ◽  
Energy System ◽  
Building Performance ◽  
Building Sector ◽  
Building Regulations

Production, management, use, and end-of-life of buildings has a large impact on climate change. Therefore, environmental targets are set to lower the greenhouse gas (GHG) emissions from the building sector. To reach these targets building regulation and voluntary environmental assessment methods (EAMs) that evaluate and certify the building’s environmental impact are put forward as tools to push the building sector towards lower GHG emissions. In Sweden, building design is governed by building regulations and the dominant EAM is ‘Miljöbyggnad’ (MB) (“Environmental building”). Today, more than 1900 buildings have been certified by MB and it has influenced the building and property sector. In this chapter the potential impact MB and the linked Swedish building regulations have on building performance, energy use and GHG emissions, will be reviewed and discussed. The analysis investigates several of the MB’s indicators, evaluate to what degree EAMs can influence the design of the building and the energy system to lower the energy use and GHG emissions based on material choices. The analysis presents important aspects that may influence the design of the building and its energy system and what challenges and possibilities the indicators, criteria and regulations can have on buildings and climate change. In addition, some modification and suggestion for improvements are presented.

TEACHING INNOVATION AND THE USE OF SOCIAL NETWORKS IN ARCHITECTURE: LEARNING BUILDING SERVICES DESIGN FOR SMART AND ENERGY EFFICIENT BUILDINGS

2018 ◽  
Vol 12 (1) ◽  
pp. 367
Author(s):  
Samuel Domínguez-Amarillo ◽  
Jesica Fernandez-Aguera ◽  
Patricia Fernandez-Aguera
Keyword(s):  
Social Networks ◽  
Undergraduate Students ◽  
Participatory Design ◽  
Energy Use ◽  
Smart Cities ◽  
Learning Experience ◽  
Professional Community ◽  
New Paradigm ◽  
Teaching Innovation ◽  
Energy Efficient Buildings

Today’s buildings are evolving from structures comprising unchanging, static elements scantly able to interact with their surroundings, towards complex systemic compounds with an impact on the environs that entails more than mere anthropic alteration. In pursuit of energy efficiency and true sustainability, buildings must acquire the ability to interact as well as to generate synergies. The most prominent features of this approach are energy management and information flows which, intelligently designed, not only enhance buildings’ capabilities, but also introduce a significant change in their relationship with the surrounds (‘smart cities’) and its inhabitants. This new paradigm calls for revisiting undergraduate architectural instruction, adopting a more complex overview of energy use and management in the design process, regarding buildings as dynamic rather than static entities. The methodology focuses on creating learning environments that favour students’ participation in problem solving and assessment, encouraging teamwork based on case studies and stressing the connection between this new architecture, ICTs included, and social networks as participatory design tools. These ideas were implemented in a pilot learning experience conducted at the University of Seville for undergraduate students. The use of ICTs and the collaboration of non-academic experts were observed to further student promotion and projection beyond the academic environment and introduce them to the professional community.

scholarly journals Energy and Greenhouse Gas Savings for LEED-Certified U.S. Office Buildings

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 749
Author(s):  
John H. Scofield ◽  
Susannah Brodnitz ◽  
Jakob Cornell ◽  
Tian Liang ◽  
Thomas Scofield
Keyword(s):  
Greenhouse Gas ◽  
Energy Use ◽  
Energy Savings ◽  
Electric Energy ◽  
Building Energy ◽  
Energy Performance ◽  
Office Buildings ◽  
Ghg Emission ◽  
Site Energy ◽  
New Construction

In this work, we present results from the largest study of measured, whole-building energy performance for commercial LEED-certified buildings, using 2016 energy use data that were obtained for 4417 commercial office buildings (114 million m2) from municipal energy benchmarking disclosures for 10 major U.S. cities. The properties included 551 buildings (31 million m2) that we identified as LEED-certified. Annual energy use and greenhouse gas (GHG) emission were compared between LEED and non-LEED offices on a city-by-city basis and in aggregate. In aggregate, LEED offices demonstrated 11% site energy savings but only 7% savings in source energy and GHG emission. LEED offices saved 26% in non-electric energy but demonstrated no significant savings in electric energy. LEED savings in GHG and source energy increased to 10% when compared with newer, non-LEED offices. We also compared the measured energy savings for individual buildings with their projected savings, as determined by LEED points awarded for energy optimization. This analysis uncovered minimal correlation, i.e., an R2 < 1% for New Construction (NC) and Core and Shell (CS), and 8% for Existing Euildings (EB). The total measured site energy savings for LEED-NC and LEED-CS was 11% lower than projected while the total measured source energy savings for LEED-EB was 81% lower than projected. Only LEED offices certified at the gold level demonstrated statistically significant savings in source energy and greenhouse gas emissions as compared with non-LEED offices.

scholarly journals Indoor Climate Performance in a Renovated School Building

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2827
Author(s):  
Pavla Mocová ◽  
Jitka Mohelníková
Keyword(s):  
Indoor Environment ◽  
Natural Ventilation ◽  
Carbon Dioxide Concentration ◽  
Heating System ◽  
Climatic Conditions ◽  
School Building ◽  
Ventilation Strategy ◽  
Indoor Climate ◽  
Microbiological Testing ◽  
Indoor Comfort

Indoor climate comfort is important for school buildings. Nowadays, this is a topical problem, especially in renovated buildings. Poorly ventilated school classrooms create improper conditions for classrooms. A post-occupancy study was performed in a school building in temperate climatic conditions. The evaluation was based on the results of long-term monitoring of the natural ventilation strategy and measurements of the carbon dioxide concentration in the school classroom’s indoor environment. The monitoring was carried out in an old school building that was constructed in the 1970s and compared to testing carried out in the same school classroom after the building was renovated in 2016. Surprisingly, the renovated classroom had a significantly higher concentration of CO2. It was found that this was due to the regulation of the heating system and the new airtight windows. The occupants of the renovated classroom have a maintained thermal comfort, but natural ventilation is rather neglected. A controlled ventilation strategy and installation of heat recovery units are recommended to solve these problems with the classroom’s indoor environment. Microbiological testing of the surfaces in school classrooms also shows the importance of fresh air and solar radiation access for indoor comfort.

scholarly journals Modeling Energy Efficiency Performance and Cost-Benefit Analysis Achieving Net-Zero Energy Building Design: Case Studies of Three Representative Offices in Thailand

2021 ◽  
Vol 13 (9) ◽  
pp. 5201
Author(s):  
Kittisak Lohwanitchai ◽  
Daranee Jareemit
Keyword(s):  
High Efficiency ◽  
Energy Gap ◽  
Cost Benefit ◽  
Building Design ◽  
Energy Performance ◽  
Office Buildings ◽  
Zero Energy ◽  
Zero Energy Building ◽  
Investment Cost ◽  
High Investment

The concept of a zero energy building is a significant sustainable strategy to reduce greenhouse gas emissions. The challenges of zero energy building (ZEB) achievement in Thailand are that the design approach to reach ZEB in office buildings is unclear and inconsistent. In addition, its implementation requires a relatively high investment cost. This study proposes a guideline for cost-optimal design to achieve the ZEB for three representative six-story office buildings in hot and humid Thailand. The energy simulations of envelope designs incorporating high-efficiency systems are carried out using eQuest and daylighting simulation using DIALux evo. The final energy consumptions meet the national ZEB target but are higher than the rooftop PV generation. To reduce such an energy gap, the ratios of building height to width are proposed. The cost-benefit of investment in ZEB projects provides IRRs ranging from 10.73 to 13.85%, with payback periods of 7.2 to 8.5 years. The energy savings from the proposed designs account for 79.2 to 81.6% of the on-site energy use. The investment of high-performance glazed-windows in the small office buildings is unprofitable (NPVs = −14.77–−46.01). These research results could help architects and engineers identify the influential parameters and significant considerations for the ZEB design. Strategies and technical support to improve energy performance in large and mid-rise buildings towards ZEB goals associated with the high investment cost need future investigations.

scholarly journals Evaluation and Selection of Integrated Energy System Construction Scheme Equipped with Smart Energy Management and Control Platform Using Single-Valued Neutrosophic Numbers

2021 ◽  
Vol 13 (5) ◽  
pp. 2615
Author(s):  
Junqing Wang ◽  
Wenhui Zhao ◽  
Lu Qiu ◽  
Puyu Yuan
Keyword(s):  
Energy Management ◽  
Evaluation Criteria ◽  
Energy System ◽  
System Construction ◽  
Interval Numbers ◽  
Construction Scheme ◽  
Smart Energy Management ◽  
Integrated Energy System ◽  
And Control ◽  
Selection Of

Since application of integrated energy systems (IESs) has formed a markedly increasing trend recently, selecting an appropriate integrated energy system construction scheme becomes essential to the energy supplier. This paper aims to develop a multi-criteria decision-making model for the evaluation and selection of an IES construction scheme equipped with smart energy management and control platform. Firstly, a comprehensive evaluation criteria system including economy, energy, environment, technology and service is established. The evaluation criteria system is divided into quantitative criteria denoted by interval numbers and qualitative criteria. Secondly, single-valued neutrosophic numbers are adopted to denote the qualitative criteria in the evaluation criteria system. Thirdly, in order to accommodate mixed data types consisting of both interval numbers and single-valued neutrosophic numbers, the TOPSIS (Technique for Order Preference by Similarity to an Ideal Solution) method is extended into a three-stage technique by introducing a fusion coefficient μ. Then, a real case in China is evaluated through applying the proposed method. Furthermore, a comprehensive discussion is made to analyze the evaluation result and verify the reliability and stability of the method. In short, this study provides a useful tool for the energy supplier to evaluate and select a preferred IES construction scheme.

Sign in / Sign up

Export Citation Format

Share Document