scholarly journals IMPROVEMENT OF FREIGHT TRANSPORT TECHNOLOGIES AND IMPLEMENTATION OF NEW TECHNOLOGIES

Transport ◽  
2003 ◽  
Vol 18 (5) ◽  
pp. 193-197 ◽  
Author(s):  
Adolfas Baublys
Keyword(s):  
Topological Structure ◽  
New Technologies ◽  
Structural Characteristics ◽  
Road Transport ◽  
Comparison Analysis ◽  
Urban Road ◽  
Efficiency Comparison ◽  
Analysis Of Stability ◽  
Stability Of Structure

The synthesis of regional (urban) road transport freight system topological structure enables the assessment of impact exercised by various structural characteristics on the functioning of the system. For this reason the quality of project solutions in the stage of system structural synthesis increases. Models of optimisation and simulation (included into the simulation procedure of optimisation of topological structure) have other possibilities as well. For instance, simulation model enables the solution of such various objectives of functional analysis of systems as, for example, the efficiency comparison analysis of stability of structure undergoing the changes of meanings of system parameters, the analysis of managing impacts of various types, loading technologies, etc.

scholarly journals SYNTHESIS OF THE TOPOLOGICAL STRUCTURE OF ROOD FREIGHT TRANSPORT SYSTEM

Transport ◽  
2006 ◽  
Vol 21 (3) ◽  
pp. 160-164 ◽  
Author(s):  
Adolfas Baublys ◽  
Margarita Išoraite
Keyword(s):  
Topological Structure ◽  
Structural Characteristics ◽  
Road Transport ◽  
Comparison Analysis ◽  
Structural Synthesis ◽  
Optimization And Simulation ◽  
Efficiency Comparison ◽  
Analysis Of Stability ◽  
Stability Of Structure

Synthesis of regional road transport freight system's topological structure enables the assessment of impact exercised by various structural characteristics on the functioning of the system. Consequently, it should increase the quality of project solutions in the stage of system structural synthesis. Models of optimization and simulation (included into the simulation procedure of optimization of topological structure) have other possibilities as well. For instance, simulation model enables the solution of various objectives of functional analysis of systems, such as the efficiency comparison analysis of stability of structure undergoing the changes of meanings of system's parameters, the analysis of managing impacts of various types, loading technologies, etc.

scholarly journals MODELLING OF FREIGHT FLOWS DISTRIBUTION AT THE TRANSPORT TERMINAL

Transport ◽  
2004 ◽  
Vol 19 (2) ◽  
pp. 86-91 ◽  
Author(s):  
Adolfas Baublys
Keyword(s):  
Carrying Capacity ◽  
Topological Structure ◽  
Road Transport ◽  
System Structure ◽  
Delivery Time ◽  
Structural System ◽  
Regional System ◽  
Time Limitations ◽  
System Characteristics

The task model has been formulated for users of freight flows at a distribution transport terminal, which enables gauging vehicles possibilities (dimensions, carrying capacity), delivery time limitations, resources of vehicle time and general costs. The synthesis of the topological structure of the freight road transport regional system has been performed. It enables the evaluation of an impact on the functioning of the system exercised by various structural system characteristics, thus improving the quality of project solutions at the stage of synthesis of the system structure.

The implementation of test control methods for the improvement of the quality content of high education in medical higher educational institution

2018 ◽  
Vol 22 (2) ◽  
pp. 357-360
Author(s):  
S. A. Kolodii ◽  
Yu. V. Kordon ◽  
O. A. Nazarchuk ◽  
N.I. Osadchuk
Keyword(s):  
New Technologies ◽  
Educational Institution ◽  
Scientific Information ◽  
Cognitive Activity ◽  
Pedagogical Training ◽  
Highly Skilled ◽  
Medical University ◽  
Independent Work ◽  
Test Control

The integration of Ukrainian system of Higher education into the European one accompanies by a transformation processes. The main goal of Higher school in our country is to prepare competitive specialists. The pedagogues of medical universities implement modern educational technologies with the use of analytically-searching work and scientific information. The implementation of new technologies of teaching is the important task of modernization of pedagogical system of mastering highly skilled specialists. The aim — to ground the implementation of test control for the estimation of quality of knowledge of future doctors. Gaining knowledge in microbiology is very necessary for future doctors to understand the principals of diagnostics and struggling infectious diseases. Knowledge in microbiology is basis for better understanding of clinical disciplines, as it assists logical perception of clinical data, influences on the forming clinical thought without which it is impossible to become a highly skilled specialist. The implementation of modern methods of studies, control, providing the increase of creative activity of students, forming and developing in them professional thought is one of the effective way of the improvement of quality of pedagogical training of highly skilled doctors. The experience of applying of the test control of knowledge in students in the medical university at classes of Microbiology, Virology and Immunology has been presented in the manuscript. The use of different types of test control has been proved to be one of the effective methods for determining the level of knowledge among students. Test control promotes the activation of cognitive activity, forms students’ skills of independent work, develops their logical thinking. Test control of obtained knowledge should be used in conjunction with other methods of studying the subject. The analysis of the results of the writing of the KROK-1 qualification exam by the students of the stomatological department has been conducted. The use of different methods of estimation of control of knowledge is necessary for its improvement. The study of microbiology is the important base of forming fundamental knowledge in students. Therefore, test control in a complex with other pedagogical methods can be used as one of the important and optimal methods to improve estimation of the basic level of students’ knowledge.

scholarly journals ECOCAPTURE@HOME: Protocol for the Remote Assessment of Apathy and Its Everyday-Life Consequences

2021 ◽  
Vol 18 (15) ◽  
pp. 7824
Author(s):  
Valérie Godefroy ◽  
Richard Levy ◽  
Arabella Bouzigues ◽  
Armelle Rametti-Lacroux ◽  
Raffaella Migliaccio ◽  
...  
Keyword(s):  
Everyday Life ◽  
New Technologies ◽  
Electrodermal Activity ◽  
Real Life ◽  
Smartphone Application ◽  
Measurement Model ◽  
Strong Impact ◽  
Active Data ◽  
Personalised Treatment

Apathy, a common neuropsychiatric symptom associated with dementia, has a strong impact on patients’ and caregivers’ quality of life. However, it is still poorly understood and hard to define. The main objective of the ECOCAPTURE programme is to define a behavioural signature of apathy using an ecological approach. Within this program, ECOCAPTURE@HOME is an observational study which aims to validate a method based on new technologies for the remote monitoring of apathy in real life. For this study, we plan to recruit 60 couples: 20 patient-caregiver dyads in which patients suffer from behavioral variant Fronto-Temporal Dementia, 20 patient-caregiver dyads in which patients suffer from Alzheimer Disease and 20 healthy control couples. These dyads will be followed for 28 consecutive days via multi-sensor bracelets collecting passive data (acceleration, electrodermal activity, blood volume pulse). Active data will also be collected by questionnaires on a smartphone application. Using a pool of metrics extracted from these passive and active data, we will validate a measurement model for three behavioural markers of apathy (i.e., daytime activity, quality of sleep, and emotional arousal). The final purpose is to facilitate the follow-up and precise diagnosis of apathy, towards a personalised treatment of this condition within everyday life.

scholarly journals Being a Gambler during the COVID-19 Pandemic: A Study with Italian Patients and the Effects of Reduced Exposition

2021 ◽  
Vol 18 (2) ◽  
pp. 424
Author(s):  
Maria Anna Donati ◽  
Silvia Cabrini ◽  
Daniela Capitanucci ◽  
Caterina Primi ◽  
Roberta Smaniotto ◽  
...  
Keyword(s):  
Structural Characteristics ◽  
Gambling Behavior ◽  
Online Gambling ◽  
Problem Gamblers ◽  
Electronic Gambling Machines ◽  
Electronic Gambling ◽  
Gambling Market ◽  
The Impact ◽  
Gambling Activities

The COVID-19 pandemic, with the consequent lockdown of about 3 months, can be viewed as an experimental model to observe the impact of the depletion of environmental factors that stimulate gambling, particularly electronic gambling machines (EGMs) that were set to zero. The effects of some structural characteristics of gambling activities that increase gambling behavior were studied among disordered gamblers in treatment in this unique scenario. In fact, studies investigating the effects of the lockdown on problem gamblers (PGs) under treatment are missing. The aims of this study were to analyze patients’ gambling behavior and craving during the lockdown and to conduct a comparison between gambling disorder (GD) symptoms at the beginning of the treatment and during lockdown. The study was conducted in Italy, the European country with the largest gambling market and the first to be affected by the virus. Data were collected through a semi-structured telephone interview conducted by healthcare professionals. Participants were 135 PGs under treatment (109 males, mean age = 50.07). Results showed that most PGs achieved a significant improvement in their quality of life, with less gambling behavior, GD symptoms, and lower craving. No shift toward online gambling and very limited shift towards other potential addictive and excessive behaviors occurred. The longer the treatment, the more monitoring is present and the better the results in terms of symptoms reduction. Individual and environmental characteristics during the lockdown favored the reduction in symptoms. Consideration for prevention and treatment are discussed.

scholarly journals Quantifying the Effects of Vibration on Medicines in Transit Caused by Fixed-Wing and Multi-Copter Drones

Drones ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 22
Author(s):  
Andrew Oakey ◽  
Tim Waters ◽  
Wanqing Zhu ◽  
Paul G. Royall ◽  
Tom Cherrett ◽  
...  
Keyword(s):  
Road Transport ◽  
Uv Spectra ◽  
Frequency Spectra ◽  
Vibration Measurements ◽  
British Pharmacopoeia ◽  
Medical Products ◽  
Industry Standard ◽  
The Stability ◽  
In Transit

The concept of transporting medical products by drone is gaining a lot of interest amongst the medical and logistics communities. Such innovation has generated several questions, a key one being the potential effects of flight on the stability of medical products. The aims of this study were to quantify the vibration present within drone flight, study its effect on the quality of the medical insulin through live flight trials, and compare the effects of vibration from drone flight with traditional road transport. Three trials took place in which insulin ampoules and mock blood stocks were transported to site and flown using industry standard packaging by a fixed-wing or a multi-copter drone. Triaxial vibration measurements were acquired, both in-flight and during road transit, from which overall levels and frequency spectra were derived. British Pharmacopeia quality tests were undertaken in which the UV spectra of the flown insulin samples were compared to controls of known turbidity. In-flight vibration levels in both the drone types exceeded road induced levels by up to a factor of three, and predominant vibration occurred at significantly higher frequencies. Flown samples gave clear insulin solutions that met the British Pharmacopoeia specification, and no aggregation of insulin was detected.

scholarly journals Delivering Personalized Care at a Distance: How Telemedicine Can Foster Getting to Know the Patient as a Person

2021 ◽  
Vol 11 (2) ◽  
pp. 137
Author(s):  
Janet Record ◽  
Roy Ziegelstein ◽  
Colleen Christmas ◽  
Cynthia Rand ◽  
Laura Hanyok
Keyword(s):  
New Technologies ◽  
Office Visit ◽  
Modern Technology ◽  
Office Visits ◽  
Patient Centeredness ◽  
Patient Centered ◽  
Personalized Care ◽  
High Satisfaction

The promise of precision medicine is based on the use of new technologies to better characterize patients by defining individuals in the areas of genomics, proteomics, metabolomics and other aspects of biologic variability. Wise application of modern technology can similarly transform health visits with patients, allowing for better characterization of the patient’s individual life circumstances than possible in a traditional office visit. The use of, and experience with, telemedicine have increased significantly during the COVID-19 pandemic. Patients and clinicians report high satisfaction with telemedicine, and the quality of communication and patient-centeredness experienced in this setting are both rated highly. In this article, we explore the benefits offered by telemedicine in facilitating personalized care with particular focus on telemedicine delivered by video platforms. We propose strategies and skills specific to the effective implementation of personalized telemedicine, drawing on literature in patient-centered communication and home visits. While traditional in-person office visits continue to offer important opportunities such as thorough physical examination and the potential for enhanced non-verbal communication, telemedicine offers many important advantages that can facilitate the process of getting to know the patient as a person.

Properties comparison of GaN epilayers deposited under different growth temperatures

2011 ◽  
Vol 19 (1) ◽  
Author(s):  
P. Wang ◽  
H. Yan ◽  
B. Cao ◽  
W. Wei ◽  
Z. Gan ◽  
...  
Keyword(s):  
Growth Temperature ◽  
Structural Characteristics ◽  
Chemical Vapour ◽  
Optimal Growth ◽  
Good Method ◽  
Test Results ◽  
Temperature Deposition ◽  
Metalorganic Chemical Vapour Deposition ◽  
Gan Film

AbstractUndoped GaN epilayers were grown on c-plane sapphire substrates under different growth temperatures by metalorganic chemical vapour deposition (MOCVD). The optical and structural characteristics of these grown samples were studied and compared. It was found that the crystalline quality of GaN film deposited at 1050°C was better that of other samples. Photoluminescence spectra showed that the intensities of yellow luminescence band of the samples decreased as the growth temperature increased. All above test results demonstrate that high temperature deposition can serve as a good method for high-quality GaN epilayer growth and there exists an optimal growth temperature.

Application of Sit-To-Stand Assistive Device Based on Hip Support

2021 ◽  
Vol 14 ◽  
Author(s):  
Huaiqiang Zhang ◽  
Qiang Xue ◽  
Shuo Yang ◽  
Tongtong Wang ◽  
Binwei Zhou
Keyword(s):  
Lower Limb ◽  
Independent Living ◽  
Structural Characteristics ◽  
Assistive Devices ◽  
Assistive Device ◽  
Technology Application ◽  
Assist Devices ◽  
Advantages And Disadvantages ◽  
Sit To Stand

Background: Completing the transition from a sitting position to a standing position is a basic skill in people’s daily lives and is crucial for independent living. Lower limb dysfunction will bring many inconveniences into a person’s life and greatly affect their quality of life. Patients with lower limb dysfunction are a specialized group, and nursing problems for this group are becoming increasingly serious. Helping patients with lower limb dysfunction restore their lower limb mobility or assisting them to walk is a social problem necessary to be solved. Objective: : To review the recent sit-to-stand assistive devices based on hip support, classify them systematically and introduce their characteristics, including the mechanisms and the types of patients for which such mechanisms are applicable; to help patients with lower limb dysfunction or doctors (therapists) understand and choose a reasonable sit-to-stand assist device based on hip support. Methods: This paper summarizes literatures and patents about sit-to-stand assistive devices. From the aspects of structural characteristics, drive type and support modes based on the hip and applications situation, the advantages and disadvantages of the typical sit-to-stand assist devices are represented. Results: Current and future development trends on the structural characteristics, drive type and support modes based on the hip and applications situation of sit-to-stand assist devices are discussed to improve the humanization, modularization and applicability of sit-to-stand assist devices. Conclusion: Sit-to-stand assistive devices based on hip support can help patients improve the quality of their life, assist patients carrying out rehabilitation training, and delay the decline of lower limb function. However, the existing sit-to-stand assistive devices based on hip support need further improvement in the aspects of motion mechanism, new technology application and ergonomics design.

Sign in / Sign up

Export Citation Format

Share Document