Regional Framework and Controls on Jurassic Evaporite and Carbonate Systems of the Arabian Plate

Author(s):  
C.G.St.C Kendall
Keyword(s):  
1984 ◽  
Vol 121 (6) ◽  
pp. 577-587 ◽  
Author(s):  
P. E. R. Lovelock

AbstractThe structure of the northern part of the Arabian platform is reviewed in the light of hitherto unpublished exploration data and the presently accepted kinematic model of plate motion in the region. The Palmyra and Sinjar zones share a common history of development involving two stages of rifting, one in the Triassic–Jurassic and the other during late Cretaceous to early Tertiary times. Deformation of the Palmyra zone during the Mio-Pliocene is attributed to north–south compression on the eastern block of the Dead Sea transcurrent system which occurred after continental collision in the north in southeast Turkey. The asymmetry of the Palmyra zone is believed to result from northward underthrusting along the southern boundary facilitated by the presence of shallow Triassic evaporites. An important NW-SE cross-plate shear zone has been identified, which can be traced for 600 km and which controls the course of the River Euphrates over long distances in Syria and Iraq. Transcurrent motion along this zone resulted in the formation of narrow grabens during the late Cretaceous which were compressed during the Mio-Pliocene. To a large extent, present day structures in the region result from compressional reactivation of old lineaments within the Arabian plate by the transcurrent motion of the Dead Sea fault zone and subsequent continental collision.


2019 ◽  
Vol 56 (12) ◽  
pp. 1347-1365 ◽  
Author(s):  
Vahid Teknik ◽  
Abdolreza Ghods ◽  
Hans Thybo ◽  
Irina M. Artemieva

We present a new 2D crustal-scale model of the northwestern Iranian plateau based on gravity–magnetic modeling along the 500 km long China–Iran Geological and Geophysical Survey in the Iranian plateau (CIGSIP) seismic profile across major tectonic provinces of Iran from the Arabian plate into the South Caspian Basin (SCB). The seismic P-wave receiver function (RF) model along the profile is used to constrain major crustal boundaries in the density model. Our 2D crustal model shows significant variation in the sedimentary thickness, Moho depth, and the depth and extent of intra-crustal interfaces. The Main Recent Fault (MRF) between the Arabian crust and the overriding central Iran crust dips at approximately 13° towards the northeast to a depth of about 40 km. The geometry of the MRF suggests about 150 km of underthrusting of the Arabian plate beneath central Iran. Our results indicate the presence of a high-density lower crustal layer beneath Zagros. We identify a new crustal-scale suture beneath the Tarom valley between the South Caspian Basin crust and Central Iran and the Alborz. This suture is associated with sharp variation in Moho depth, topography, and magnetic anomalies, and is underlain by a 20 km thick high-density crustal root at 35–55 km depth. The high-density lower crust in Alborz and Zagros may be related to partial eclogitization of crustal roots below about 40 km depth. The gravity and magnetic models indicate a highly extended continental crust for the SCB crust along the profile. Low observed magnetic susceptibility of the Kermanshah ophiolites likely indicates that the ophiolite rocks only form a thin layer that has been thrust over the sedimentary cover.


2021 ◽  
Author(s):  
Mohamed Sobh ◽  
Khaled Zahran ◽  
Nils Holzrichter ◽  
Christian Gerhards

<p><span>Widespread Cenozoic volcanisms in the Arabian shield including “Harrats” have been referring to lithospheric thinning and/or mantle plume activity as a result of Red Sea rift-related extension.</span></p><p><span>A fundamental key in understanding the deriving mechanism of these volcanic activities and its relationship to 2007-2009 seismic swarms required a reliable model of the present-day lithospheric thermo-chemical structure.</span></p><p><span>In this work, we modeled crustal and lithospheric thickness variation as well as the variations in thermal, composition, seismic velocity, and density of the lithosphere beneath the Arabian shield within a thermodynamically self - consistent framework.</span></p><p><span>The resulting thermal and density structures show large variations, revealing strong asymmetry between the Arabian shield and Arabian platform within the Arabian Plate.</span></p><p><span>We model negative density anomalies associated with the hot mantle beneath Harrats, which coincides with the modelled lithosphere thinned (~ 65 km) as a result of the second stage of lithospheric thinning following the initial Red Sea extension.</span></p>


2021 ◽  
Author(s):  
Matthieu Ribot ◽  
Yann Klinger ◽  
Edwige Pons-Branchu ◽  
Marthe Lefevre ◽  
Sigurjón Jónsson

<p>Initially described in the late 50’s, the Dead Sea Fault system connects at its southern end to the Red Sea extensive system, through a succession of left-stepping faults. In this region, the left-lateral differential displacement of the Arabian plate with respect to the Sinai micro-plate along the Dead Sea fault results in the formation of a depression corresponding to the Gulf Aqaba. We acquired new bathymetric data in the areas of the Gulf of Aqaba and Strait of Tiran during two marine campaigns (June 2018, September 2019) in order to investigate the location of the active faults, which structure and control the morphology of the area. The high-resolution datasets (10-m posting) allow us to present a new fault map of the gulf and to discuss the seismic potential of the main active faults.</p><p>We also investigated the eastern margin of the Gulf of Aqaba and Tiran island to assess the vertical uplift rate. To do so, we computed high-resolution topographic data and we processed new series of U-Th analyses on corals from the uplifted marine terraces.</p><p>Combining our results with previous studies, we determined the local and the regional uplift in the area of the Gulf of Aqaba and Strait of Tiran.</p><p>Eventually, we discussed the tectonic evolution of the gulf since the last major change of the tectonic regime and we propose a revised tectonic evolution model of the area.</p><p> </p>


GeoArabia ◽  
2009 ◽  
Vol 14 (3) ◽  
pp. 199-228 ◽  
Author(s):  
Mohammad Faqira ◽  
Martin Rademakers ◽  
AbdulKader M. Afifi

ABSTRACT During the past decade, considerable improvements in the seismic imaging of the deeper Paleozoic section, along with data from new well penetrations, have significantly improved our understanding of the mid-Carboniferous deformational event. Because it occurred at the same time as the Hercynian Orogeny in Europe, North Africa and North America it has been commonly referred to by the same name in the Middle East. This was the main tectonic event during the late Paleozoic, which initiated or reactivated many of the N-trending block uplifts that underlie the major hydrocarbon accumulations in eastern Arabia. The nature of the Hercynian deformation away from these structural features was poorly understood due to inadequate seismic imaging and insufficient well control, along with the tectonic overprint of subsequent deformation events. Three Hercynian NE-trending arches are recognized in the Arabian Plate (1) the Levant Arch, which extended from Egypt to Turkey along the coast of the Mediterranean Sea, (2) the Al-Batin Arch, which extended from the Arabian Shield through Kuwait to Iran, and (3) the Oman-Hadhramaut Arch, which extended along the southeast coast of Oman and Yemen. These arches were initiated during the mid-Carboniferous Hercynian Orogeny, and persisted until they were covered unconformably by the Khuff Formation during the Late Permian. Two Hercynian basins separate these arches: the Nafud-Ma’aniya Basin in the north and Faydah-Jafurah Basin in the south. The pre-Hercynian Paleozoic section was extensively eroded over the arches, resulting in a major angular unconformity, but generally preserved within the basins. Our interpretation suggests that most of the Arabian Shield, except the western highlands along the Red Sea, is the exhumed part of the Al-Batin Arch. The Hercynian structural fabric of regional arches and basins continue in northern Africa, and in general appear to be oriented orthogonal to the old margin of the Gondwana continent. The Hercynian structure of arches and basins was partly obliterated by subsequent Mesozoic and Cenozoic tectonic events. In eastern Saudi Arabia, Qatar, and Kuwait, regional extension during the Triassic formed N-trending horsts and graben that cut across the NE-trending Hercynian mega-structures, which locally inverted them. Subsequent reactivation during the Cretaceous and Neogene resulted in additional growth of the N-trending structures. The Hercynian Arches had major impact on the Paleozoic hydrocarbon accumulations. The Silurian source rocks are generally preserved in the basins and eroded over the arches, which generally confined Silurian-sourced hydrocarbons either within the basins or along their flanks. Furthermore, the relict Hercynian paleo-topography generally confined the post-Hercynian continental clastics of the Unayzah Formation and equivalents to the Hercynian basins. These clastics contain the main Paleozoic oil and gas reservoirs, particularly along the basin margins where they overlie the sub-crop of the Silurian section with angular unconformity, thus juxtaposing reservoir and source rock.


2007 ◽  
Vol 50 (1) ◽  
pp. 1 ◽  
Author(s):  
Florentin Paris ◽  
Bernard Owens ◽  
Merrell A. Miller
Keyword(s):  

GeoArabia ◽  
2001 ◽  
Vol 6 (3) ◽  
pp. 445-504 ◽  
Author(s):  
A.Ziegler Martin

ABSTRACT A series of 19 paleofacies maps have been generated for given time intervals between the Late Permian and Holocene to reconstruct the depositional history of the Arabian Plate. The succession of changing lithological sequences is controlled by the interplay of eustacy and sediment supply with regional and local tectonic influences. The Mesozoic paleofacies history of the Plate is, in its central and eastern portion east of Riyadh, strongly influenced by an older N-trending, horst and graben system that reflects the grain of the Precambrian Amar Collision and successively younger structural deformations. The late Paleozoic Hercynian orogenic event caused block faulting and relative uplift and resulted in a marked paleorelief. This jointed structural pattern dominated the entire Mesozoic and, to some extent, the Cenozoic facies distribution. The relationship between producing fields and the paleofacies maps illustrates the various petroleum systems of particular times and regions.


Sign in / Sign up

Export Citation Format

Share Document