Organisational Sustainability Role in Supply Chain Best Practices

Author(s):  
Fawzy Soliman ◽  
Josiah Edmond

This chapter is targeted at identifying the relationship of supply chain best practices and organisational sustainability. Another objective of this chapter is to identify the definition of SC best practices and its level of adoption by SMEs. The findings of this research suggest a linear link between SC best practices and the benefits it has on firms; it also identified that the definition of SC best practice is endlessly evolutionary and sometimes circumstantially subjective. The research has moreover shown that the level of knowledge management plays a wider role on the effectiveness of SC best practices within a firm.

2010 ◽  
Vol 5 (2) ◽  
Author(s):  
Andrew Speers ◽  
Allen Gale ◽  
Nancy Penney

This paper describes an international biosolids management initiative, known as the Australian and New Zealand Biosolids Partnership (ANZBP). The ANZBP - known formerly as the Australasian Biosolids Partnership – comprises 33 members dedicated to promoting the sustainable management of biosolids across the two nations. Two critical research projects are described, each of which contributes to the ANZBP goal of promoting the sustainable management of biosolids. The first is a review of community attitudes to biosolids management, the outcomes of which will be used to refine communication tools and methods of community consultation and which will provide input to policy development over time. The second is a review of regulations in place in Australia and New Zealand carried out to identify inconsistencies and improvements that could be made. An outcome of this initiative is potentially the development of a best practice manual. The relationship of the two projects to a sustainability framework adopted by the ANZBP is also described, as is the relationship of the two projects to each other.


Author(s):  
Rev George Handzo ◽  
Rev Brian Hughes

Gomez and her colleagues have presented a helpful study of the relationship of the chaplains in her health system to physicians which highlights several barriers to a well-integrated relationship and thus to more optimal patient care. We have seen these same barriers as we have consulted with health systems nationally and have also identified many best practices that mediate or even eliminate many of these barriers. This commentary describes some of what we have seen as chaplain-generated causes of those barriers and effective strategies that have been employed to overcome them. We also provide some resources for chaplains who wish to institute some of these best practices themselves.


2016 ◽  
Vol 11 (3) ◽  
pp. 802-810 ◽  
Author(s):  
Nitin Yashwant Patil ◽  
Ravi M. Warkhedkar

Purpose In the past decade, much has been written about knowledge management (KM) in the manufacturing; however, less attention has been paid to the Indian automobile ancillary industries located in Chinchwad, Pune. It is suitable to find out the relationship of the factors of the study. It helps in identifying the hierarchy of factors to be taken, and interlinking of production department with KM improves the productivity of the industries. Categorization of these principles based on their driving power (principles which hold other principles) and dependence (principles which are dependent on other principles) has also been examined for KM implementation to study the driving power and dependence power of these principles. This paper aims to determine the roadmap of KM implementation and categorize KM principles based on their driving power for manufacturing industries with the use of the interpretive structural modeling (ISM)-based model. The results indicate that the principles possessing higher driving power, such as KM, inventory control, quality control, productivity and scheduling and their interlinking. The major contribution of this research lies in the development of contextual relationship among various identified factors of KM and determination of their driving and dependence power through a single systemic framework. Design/methodology/approach In this paper, author find out the suitability ISM for Indian Automobile industries to find the relation among the variables. Findings ISM model has been developed for the hierarchy of the identified KM. As ISM model results a hypothetical hierarchy which needs a proper quantitative analysis to evaluate their percentage effectiveness in the hierarchy. Research limitations/implications It is applied to automobile industries with limited number of variables that will show the dependence variable and driving variables and their interrelations. It can be applied other fields to fine the relationship of variables. Practical implications The ISM may be used in supply chain management and total quality management to find interlinking between the variables. Originality/value The limited data collected from Pimpri Chinchwad industrial area of Pune from Maharashtra state (India).


2013 ◽  
Vol 168 (3) ◽  
pp. 393-401 ◽  
Author(s):  
Christa C van Bunderen ◽  
Mirjam M Oosterwerff ◽  
Natasja M van Schoor ◽  
Dorly J H Deeg ◽  
Paul Lips ◽  
...  

ObjectiveHigh as well as low levels of IGF1 have been associated with cardiovascular diseases (CVD). The relationship of IGF1 with (components of) the metabolic syndrome could help to clarify this controversy. The aims of this study were: i) to investigate the association of IGF1 concentration with prevalent (components of) the metabolic syndrome; and ii) to examine the role of (components of) the metabolic syndrome in the relationship between IGF1 and incident CVD during 11 years of follow-up.MethodsData were used from the Longitudinal Aging Study Amsterdam, a cohort study in a representative sample of the Dutch older population (≥65 years). Data were available in 1258 subjects. Metabolic syndrome was determined using the definition of the US National Cholesterol Education Program Adult Treatment Panel III. CVD were ascertained by self-reports and mortality data.ResultsLevels of IGF1 in the fourth quintile were associated with prevalent metabolic syndrome compared with the lowest quintile (odds ratio: 1.59, 95% confidence interval (CI) 1.09–2.33). The middle up to the highest quintile of IGF1 was positively associated with high triglycerides in women. Metabolic syndrome was not a mediator in the U-shaped relationship of IGF1 with CVD. Both subjects without the metabolic syndrome and low IGF1 levels (hazard ratio (HR) 1.75, 95% CI 1.12–2.71) and subjects with the metabolic syndrome and high IGF1 levels (HR 2.28, 95% CI 1.21–4.28) demonstrated increased risks of CVD.ConclusionsIn older people, high-normal IGF1 levels are associated with prevalent metabolic syndrome and high triglycerides. Furthermore, this study suggests the presence of different pathomechanisms for both low and high IGF1 levels and incident CVD.


2021 ◽  
Vol 31 (2) ◽  
pp. 307-321
Author(s):  
Luke O’Sullivan ◽  

The concept of civilisation is a controversial one because it is unavoidably normative in its implications. Its historical associations with the effort of Western imperialism to impose substantive conditions of life have made it difficult for contemporary liberalism to find a definition of “civilization” that can be reconciled with progressive discourse that seeks to avoid exclusions of various kinds. But because we lack a way of identifying what is peculiar to the relationship of civilisation that avoids the problem of domination, it has tended to be conflated with other ideas. Taking Samuel Huntington's idea of a “Clash of Civilisations” as a starting point, this article argues that we suffer from a widespread confusion of civilisation with “culture,” and that we also confuse it with other ideas including modernity and technological development. Drawing on Thomas Hobbes, the essay proposes an alternative definition of civilisation as the existence of limits on how we may treat others.


Author(s):  
V. V. Soloviev, ◽  
S. V. Yushkin ◽  
S. V. Maksimov*

The article examines the etymology and prehistory of the introduction of the institution of antimonopoly compliance in Russian business practice, the relationship of this institution with the institution of general compliance. The article considers the definition of the concept of antimonopoly compliance, enshrined in the new article 91 of the Federal Law "On Protection of Competition".The authors propose their own definition of the concept of antimonopoly compliance as an activity of an economic entity aimed at ensuring compliance with antimonopoly legislation by employees of an economic entity and an economic entity as a whole by preventing and suppressing violations of the requirements of such legislation and regulatory legal and law enforcement acts based on it.The authors also substantiate the advisability of developing a special national standard GOST R "System of internal compliance with the requirements of antimonopoly legislation (antimonopoly compliance system) of an economic entity".It is noted that the effectiveness of the antimonopoly compliance system will depend not only on the ability of an economic entity to form an antimonopoly compliance system on the basis of an appropriate national standard, but also on the state's ability to determine and guarantee effective incentives to comply with antimonopoly legislation.The authors substantiate the advisability of supplementing the Code of Administrative Offenses of the Russian Federation with provisions that provide for the obligation and limits to reduce the amount of punishment or replace the punishment with a softer one in the event of an anticompetitive administrative offense by a person who has implemented an effective system of antimonopoly compliance.


2013 ◽  
Vol 8 (4) ◽  
pp. 110 ◽  
Author(s):  
Jackie Druery ◽  
Nancy McCormack ◽  
Sharon Murphy

Objective - The term “best practice” appears often in library and information science literature, yet, despite the frequency with which the term is used, there is little discussion about what is meant by the term and how one can reliably identify a best practice. Methods – This paper reviews 113 articles that identify and discuss best practices, in order to determine how “best practices” are distinguished from other practices, and whether these determinations are made on the basis of consistent and reliable evidence. The review also takes into account definitions of the term to discover if a common definition is used amongst authors. Results – The “evidence” upon which papers on “best practices” are based falls into one of the following six categories: 1) opinion (n=18, 15%), 2) literature reviews (n=13, 12%), 3) practices in the library in which the author works (n=19, 17%), 4) formal and informal qualitative and quantitative approaches (n=16, 14%), 5) a combination of the aforementioned (i.e., combined approaches) (n=34, 30%), and 6) “other” sources or approaches which are largely one of a kind (n=13, 12%). There is no widely shared or common definition of “best practices” amongst the authors of these papers, and most papers (n=94, 83%) fail to define the term at all. The number of papers was, for the most part, split evenly amongst the six categories indicating that writers on the subject are basing “best practices” assertions on a wide variety of sources and evidence. Conclusions – Library and information science literature on “best practices” is rarely based on rigorous empirical methods of research and therefore is generally unreliable. There is, in addition, no widely held understanding of what is meant by the use of the term.


2018 ◽  
Vol 10 (2) ◽  
pp. 23-29
Author(s):  
Zahid Hussain ◽  
Ahmad Bin Jusoh ◽  
Muhammad Sarfraz ◽  
Khalil Ur Rehman Wahla

The purpose of this research paper was to find the impact of the supply chain on firm performance in Textile firm of Pakistan. Data was collected through questioners in the month of March 2018, Approximately 30 questioners were distributed among the managers of the ten textile organizations in Faisalabad which are expected to have the best knowledge about the supply chain operations and its impact on the performance of the organization, all of them responded positively. It is found that dimensions associated with SCM methods as well as explain the connection amongst SCM methods, aggressive benefit, as well as firm performance. The actual study focuses on the causal associations in between SCM exercise, aggressive benefit as well as firm performance as well as ignores the actual feasible recursive associations.  


Sign in / Sign up

Export Citation Format

Share Document