E-Agriculture Platform

2020 ◽  
Vol 16 (4) ◽  
pp. 89-104
Author(s):  
A. K. Aromolaran ◽  
S. N. Atata ◽  
R. A. Abubakar ◽  
Hannah A. Atere
Keyword(s):  
Power Supply ◽  
Network Connectivity ◽  
Extension Agents ◽  
Quantitative Methodology ◽  
Rural People ◽  
Electric Power Supply ◽  
Market Coverage ◽  
The Impact ◽  
Farming Households ◽  
Positive Effect

The study examined accessibility and effect of e-agriculture on the livelihoods of the farming households using quantitative methodology. Farmers that have used e-agriculture components in their livelihoods were interviewed. Results showed that users had a great access to e-agriculture components and it has a positive effect. Access to e-agriculture platform increases market coverage for the sales, thereby doubling their income. The e-wallet was used to purchase inputs directly from companies and deposit money via e-transaction. The e-agriculture platform facilitates easy and fast communication with extension agents and fellow farmers. In order to operate the platform effectively, poor electric power supply and network connectivity must be resolved. The concept of e-agriculture aids the transformation of agriculture production by providing a platform to obtain information and market links to dispose produces which prevent postharvest losses and enhance profit margin. The impact of e-agriculture in the livelihoods of rural people, largely depends on their accessibility to the platform.

Impact of Digitalization on Service Work in Knowledge-Intensive Business Services: An Empirical Study in Tax Consultancies

2019 ◽  
Vol 3 (4) ◽  
pp. 209-222
Author(s):  
Philipp K. Görs ◽  
Henning Hummert ◽  
Anne Traum ◽  
Friedemann W. Nerdinger
Keyword(s):  
Work Engagement ◽  
Service Work ◽  
Psychological Consequences ◽  
Business Services ◽  
Knowledge Intensive Business Services ◽  
Positive Effects ◽  
Knowledge Intensive ◽  
The Impact ◽  
Positive Effect ◽  
Special Case

Digitalization is a megatrend, but there is relatively little knowledge about its consequences for service work in general and specifically in knowledge-intensive business services (KIBS). We studied the impact of digitalization on psychological consequences for employees in tax consultancies as a special case of KIBS. We compare two tax consulting jobs with very different job demands, those of tax consultants (TCs) and assistant tax consultants (ATCs). The results show that the extent of digitalization at the workplace level for ATCs correlates significantly positively with their job satisfaction. For TCs, the same variable correlates positively with their work engagement. These positive effects of digitalization are mediated in the case of ATCs by the impact on important job characteristics. In the case of TCs, which already have very good working conditions, the impact is mediated by the positive effect on self-efficacy. Theoretical and practical consequences of these results are discussed.

Comparative study of the impact of two mechanical perforation densities on the behavior of a sandy soil

2012 ◽  
Vol 8 (1) ◽  
pp. 37-48
Author(s):  
S. Chehaibi ◽  
K. Abrougui ◽  
F. Haouala
Keyword(s):  
Soil Water ◽  
Sandy Soil ◽  
Water Infiltration ◽  
Cone Penetration ◽  
Initial State ◽  
Soil Water Infiltration ◽  
Good Improvement ◽  
The Impact ◽  
Positive Effect ◽  
Resistance To Penetration

The effects of mechanical perforation densities by extracting soil cores through an aerator Vertidrain with a working width of 1.6 m and equipped with hollow tines spaced of 65 mm, were studied on a sandy soil of a grassy sward in the Golf Course El Kantaoui in Sousse (Tunisia). The mechanical aeration was performed at two densities: 250 and 350 holes/m2. The cone penetration resistance and soil water infiltration were measured. These parameters were performed at initial state before aeration (E0) and then on the 10th, 20th and 30th day after aeration. These results showed that perforation density of 350 holes/m2 had a positive effect on the soil by reducing its cone resistance to penetration compared to the initial state (Rp = 14.8 daN/cm2). At 5 cm depth the decrease in resistance to penetration was 34% and 43% on the 10th and 20th day after aeration, respectively. However, on the 30th day after aeration the soil resistance to penetration tended to grow and its value compared to the initial state decreased only by 21 and 26%, respectively, at 5 and 15 cm of depth only by 10% and 9% with 250 holes/m2 density. The soil water infiltration made a good improvement after aeration compared to the initial state. This parameter increased from 4.8 cm/h to 8.3, 10.9 and 13.1 cm/h with 250 holes/m2 density and to 10, 12.9 and 14.8 cm/h with 350 holes/m2 density on the 10th, 20th and 30th day following the aeration.

A Combined Wind-and-Sola Generator for Autonomous Electric Power Supply Systems

2018 ◽  
pp. 19-27
Author(s):  
BAGAUDIN Kh. GAITOV ◽  
◽  
Yakov M. KASHIN ◽  
Lev E. KOPELEVICH ◽  
Aleksandr V. SAMORODOV ◽  
...  
Keyword(s):  
Electric Power ◽  
Power Supply ◽  
Electric Power Supply ◽  
Supply Systems

THEORETICAL STUDY OF THE EFFECT OF GEOMETRICAL PARAMETERS AND LOCATION OF ROTOR IMPACT ELEMENTS OF AN IMPACT-CENTRIFUGAL GRINDER ON SPEED AND ANGLES OF CRUSHED PARTICLES FLIGHT

2020 ◽  
Keyword(s):  
Granulometric Composition ◽  
Theoretical Study ◽  
Process Efficiency ◽  
Geometrical Parameters ◽  
Grinding Process ◽  
Main Work ◽  
Impact Element ◽  
The Impact ◽  
Positive Effect ◽  
Efficiency Indicators

One of efficiency indicators of grain grinders is grain granulometric composition. The basis of mixed fodder is crushed grain, the particles of which must have a leveled granulometric composition for subsequent mixing and obtaining a high-quality feed mixture. In agricultural production, hammer crushers are widely used, in which the destruction of grain occurs due to the impact of a hinged hammer. The main disadvantage of these crushers is that not the entire surface of the hammers is involved in grinding, thus reduces grinding process efficiency. A slightly different principle of material destruction is laid down in the basis of the proposed design of the shock-centrifugal grinder. Main work is performed by flat impact elements located on the rotor, which serve to accelerate crushed particles with subsequent impact of them on the bump elements. An important step in the design of new constructions of shock-centrifugal grinders is to determine size and location of the impact elements on the rotor, without which the grinding process is not possible. In the calculation method presented, the dependencies for determining the velocities and angles of a single particle flight from the surface of a flat impact element for its specified dimensions are proposed. Two variants of an impact element location on the rotor are considered and analyzed: radial and at an angle in the direction of rotor rotation. As a result of research carried out, it is noted that in the case of inclined position of an impact element on the rotor an increase in flight speed and flight angles change in crushed particles, which gives the opportunity to have a positive effect on grinding process.

Sign in / Sign up

Export Citation Format

Share Document