Application of Molten Slag Fine Aggregate Concrete Using Superplasticizer

2006 ◽  
pp. 329-338
Author(s):  
Shuzo Otsuka ◽  
Yoshihisa Nakata ◽  
Takeshi Saito ◽  
Hiroki Takahashi ◽  
Keishi Tobinai ◽  
...  
Keyword(s):  
Molten Slag ◽  
Fine Aggregate ◽  
Aggregate Concrete

Application of Molten Slag Fine Aggregate Concrete Using Superplasticizer

2006 ◽  
Vol 302-303 ◽  
pp. 329-338
Author(s):  
Shuzo Otsuka ◽  
Yoshihisa Nakata ◽  
Takeshi Saito ◽  
Hiroki Takahashi ◽  
Keishi Tobinai ◽  
...  
Keyword(s):  
Molten Slag ◽  
Full Scale ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Hardened Concrete ◽  
Fine Aggregate ◽  
Aggregate Concrete ◽  
Significant Difference

With increasing number of melting-solidification plants for the domestic wastes and incineration ashes, the resulting molten slag is now expected as a recycled aggregate for concrete in Japan, while application examples until now are limited to non-loadbearing pre-cast concrete and concrete secondary products. This study deals with a full-scale application of molten slag recycled fine aggregate. Starting with the inspection of monthly variations in quality of molten slag fine aggregate in a plant, construction of a full-scale structure was attempted using the recycled aggregate concrete with a superplasticizer. During construction, pumpability of the recycled concrete was examined and the quality of hardened concrete in the structure was evaluated. It was shown that quality variation of the molten slag fine aggregate during eight months was sufficiently small, and pumpability as well as concrete quality in structure showed no significant difference with those of the ordinary concrete.

Recycling of Waste Concrete and Fly Ash for Recycled Aggregate Concrete: Fundamental Characteristics Evaluation

2009 ◽  
Vol 620-622 ◽  
pp. 255-258 ◽  
Author(s):  
Cheol Woo Park
Keyword(s):  
Fly Ash ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Experimental Program ◽  
Concrete Aggregate ◽  
Fine Aggregate ◽  
Recycled Concrete Aggregate ◽  
Aggregate Concrete ◽  
Waste Concrete

As the amount of waste concrete has been increased and recycling technique advances, this study investigates the applicability of recycled concrete aggregate for concrete structures. In addition fly ash, the industrial by-product, was considered in the concrete mix. Experimental program performed compressive strength and chloride penetration resistance tests with various replacement levels of fine recycled concrete aggregate and fly ash. In most case, the design strength, 40MPa, was obtained. It was known that the replacement of the fine aggregate with fine RCA may have greater influence on the strength development rather than the addition of fly ash. It is recommended that when complete coarse aggregate is replaced with RCA the fine RCA replacement should be less than 60%. The recycled aggregate concrete can achieve sufficient resistance to the chloride ion penetration and the resistance can be more effectively controlled by adding fly ash. It I finally conclude that the recycled concrete aggregate can be successfully used in the construction field and the recycling rate of waste concrete and flay ash should be increased without causing significant engineering problems.

scholarly journals The Use of Sheet Glass Powder as Fine Aggregate Replacement in Concrete

2010 ◽  
Vol 4 (1) ◽  
pp. 65-71 ◽  
Author(s):  
M. Mageswari ◽  
Dr. B. Vidivelli
Keyword(s):  
Sheet Glass ◽  
Glass Powder ◽  
Fine Aggregate ◽  
Test Results ◽  
Natural Sand ◽  
Aggregate Concrete ◽  
Fine Aggregates ◽  
Interesting Possibility ◽  
Compact State ◽  
Conservation Of Natural Resources

Sheet glass powder (SGP) used in concrete making leads to greener environment. In shops, near by Chidambaram many sheet glass cuttings go to waste, which are not recycled at present and usually delivered to landfills for disposal. Using SGP in concrete is an interesting possibility for economy on waste disposal sites and conservation of natural resources. This paper examines the possibility of using SGP as a replacement in fine aggregate for a new concrete. Natural sand was partially replaced (10%, 20%, 30%, 40% and 50%) with SGP. Compressive strength, Tensile strength (cubes and cylinders) and Flexural strength up to 180 days of age were compared with those of concrete made with natural fine aggregates. Fineness modulus, specific gravity, moisture content, water absorption, bulk density, %voids, % porosity (loose and compact) state for sand (S) and SDA were also studied. The test results indicate that it is possible to manufacture concrete containing Sheet glass powder (SGP) with characteristics similar to those of natural sand aggregate concrete provided that the percentage of SGP as fine aggregate is limited to 10-20%, respectively.

Experimental Study on Mechanical Properties of Fine Aggregate Concrete Made after Wet-Sieving Coarse Aggregate

2010 ◽  
Vol 168-170 ◽  
pp. 2200-2203 ◽  
Author(s):  
Shun Bo Zhao ◽  
Na Liang ◽  
Li Xin Liu ◽  
Li Sun ◽  
Su Yang
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Coarse Aggregate ◽  
Fine Aggregate ◽  
Concrete Wall ◽  
Aggregate Concrete ◽  
Structural Wall ◽  
Ordinary Concrete ◽  
Reinforced Composite ◽  
Wet Sieving

The validity of the wet-sieving concrete technique for building the reinforced composite concrete wall are demonstrated in the paper. The fine aggregate concrete made by ordinary concrete passing the sieve with square mash of 15 mm was cast for the surface layer, the recomposed concrete mixed by the residual concrete stayed on the sieve with the ordinary concrete was cast for the reinforced concrete structural wall. The mechanical properties such as the cubic and compressive strengths, the elastic modulus and the splitting and flexural tensile strengths of the fine aggregate concrete, the recomposed concrete and the ordinary concrete were tested and analyzed. The results show that the elastic modulus and splitting tensile strength of fine aggregate concrete reduce in some extent compared with that of ordinary concrete, the mechanical properties of recomposed concrete are almost the same as that of ordinary concrete.

scholarly journals Characterization of lightweight concrete made of palm oil clinker aggregates

2018 ◽  
Vol 250 ◽  
pp. 03002 ◽  
Author(s):  
Muhammad Sazlly Nazreen ◽  
Roslli Noor Mohamed ◽  
Mariyana Aida Ab Kadir ◽  
Nazry Azillah ◽  
Nazirah Ahmad Shukri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Palm Oil ◽  
Lightweight Concrete ◽  
Flexural Modulus ◽  
Pulse Velocity ◽  
Normal Weight ◽  
Lightweight Aggregate Concrete ◽  
Fine Aggregate ◽  
Test Results ◽  
Aggregate Concrete

Lightweight concrete (LWC) has been identified as an innovative technique for construction purposes. Lightweight concrete can be categorized into three different types which are no-fine aggregate concrete, lightweight aggregate concrete and aerated concrete. This paper studied the characteristic of the lightweight concrete in term of mechanical properties utilizing the palm oil clinker (POC) as lightweight aggregates. Two mixes of lightweight concrete were developed, namely as POCC100 and POCC50 where each mix utilized 100% and 50% of total replacement to fine and coarse aggregates, respectively. The fresh and hardened POC concrete was tested and compared to the normal concrete (NC). The hardened state of the concrete was investigated through density test, ultrasonic pulse velocity, cube compressive, splitting tensile, flexural, modulus of elasticity and Poisson's ratio. From density test results, POC falls into the category of lightweight concrete with a density of 1990.33 kg/m3, which are below than normal weight concrete density. The mechanical properties test results on POCC100 and POCC50 showed that the concrete compressive strength was comparable about 85.70% and 96% compared to NC specimen, respectively. For the flexural strength, POCC50 and POCC100 were comparable about 98% and 97% to NC specimen, respectively. While splitting tensile strength of POCC50 and POCC100 was only 0.6% and 4% lower than NC specimen, respectively. In terms of sustainability of solid waste management, the application of the POC in construction will reduce the redundant of by-products resulted from the palm oil industries. After undergoing various testing of concrete mechanical properties, it can be concluded that POC aggregates was compatible to be used in ligtweight concrete mix proportion.

Strengths Investigation of Air Entrained Recycled Fine Aggregate Mortar

2012 ◽  
Vol 253-255 ◽  
pp. 432-435
Author(s):  
Jiu Su Li ◽  
Chun Li Qin
Keyword(s):  
Flexural Strength ◽  
Mechanical Performance ◽  
Fine Aggregate ◽  
Aggregate Concrete ◽  
Optimum Dosage ◽  
Recycled Fine Aggregate ◽  
Waste Concrete

Fine aggregate can be extracted from waste concrete by series of processing. The recycled fine aggregate can then be utilized to manufacture recycled fine aggregate mortar (RFAM) or recycled fine aggregate concrete (RFAC). Air entraining agent was added in RFAM to improve its mechanical performance. The influence of the dosage of the air entraining agent on both the compressive and flexural strength of the RFAM was explored after 7 days and 28 days curing. The optimum dosage of the air entraining agent was determined.

The Properties of Fine Recycled Aggregate Concrete Containing Recycled Bricks from Construction and Demolition Waste

2018 ◽  
Vol 760 ◽  
pp. 193-198 ◽  
Author(s):  
Kristina Fořtová ◽  
Tereza Pavlů
Keyword(s):  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Demolition Waste ◽  
Natural Sand ◽  
Aggregate Concrete ◽  
Freeze Thaw ◽  
Recycled Fine Aggregate

This paper presents research results of recycled fine aggregate concrete testing. The main aim of this contribution is verification of properties of fine aggregate concrete with partial replacement of fine natural aggregate by recycled masonry aggregate originated from construction and demolition waste. The influence of partial replacement of natural sand to mechanical properties and freeze-thaw resistance is described. The compressive strength and flexural strength were tested at the age of 28 and 60 days and after 25, 50, 75 and 100 freeze-thaw cycles. Partial replacement of natural sand was 0, 25 and 50 % for all these tests. Prismatic specimens were examined.

Sign in / Sign up

Export Citation Format

Share Document