Research on the Speech Enhancement Method based on PCA/KLT Algorithms

2012 ◽  
Vol 239-240 ◽  
pp. 1274-1278
Author(s):  
Guang Yan Wang ◽  
Yan Xiang Geng ◽  
Xiao Qun Zhao
Keyword(s):  
Speech Enhancement ◽  
High Performance ◽  
Large Scale ◽  
Colored Noise ◽  
Minimum Description Length ◽  
Signal To Noise Ratio ◽  
Principal Component ◽  
White And Colored Noise ◽  
Karhunen Loeve Transform ◽  
Subspace Selection

In this paper, we propose a speech enhancement technique in terms of subspace methods to reduce the white or colored noise in strong background noise environment. This subspace approach based on Karhunen-Loève transform (KLT) and implemented via Principal Component Analysis (PCA). The subspace selection provided by the minimum description length (MDL) criterion. An offset factor generated from the white noise was used to modify the variance to adapt to the specified colored noise. The objective speech quality measures SegSNR have been introduced to evaluate the performance of the proposed method in time domain. A large amount of data and figures testify that our algorithm provides high performance for a large scale of input signal-to-noise ratio (-5~10dB). The performance of our algorithm is assessed in white and colored noise.

scholarly journals Dual and joint estimation for speech enhancement

2018 ◽  
Vol 7 (2.7) ◽  
pp. 5
Author(s):  
V Gopi Tilak ◽  
S Koteswara Rao
Keyword(s):  
Kalman Filter ◽  
Speech Enhancement ◽  
Mobile Communications ◽  
Colored Noise ◽  
Signal To Noise Ratio ◽  
Joint Estimation ◽  
Signal To Noise ◽  
Estimation Techniques ◽  
White And Colored Noise

Maintaining good quality and intelligibility of speech is the primary constraint in mobile communications. The present work is on the enhancement of speech under the consideration of additive white and colored noise environments using Kalman filter. Dual and Joint estimation techniques were applied and the quality of speech is analyzed through the signal to noise ratio. The techniques were applied in both ideal and practical cases for two different speech samples.

scholarly journals Tomographic weak lensing bispectrum: a thorough analysis towards the next generation of galaxy surveys

2019 ◽  
Vol 490 (4) ◽  
pp. 4688-4714 ◽  
Author(s):  
Matteo Rizzato ◽  
Karim Benabed ◽  
Francis Bernardeau ◽  
Fabien Lacasa
Keyword(s):  
Power Spectrum ◽  
High Performance ◽  
Large Scale ◽  
Signal To Noise Ratio ◽  
Principal Component ◽  
Weak Lensing ◽  
Galaxy Surveys ◽  
Point Correlation ◽  
Non Gaussian ◽  
The Impact

ABSTRACT We address key points for an efficient implementation of likelihood codes for modern weak lensing large-scale structure surveys. Specifically, we focus on the joint weak lensing convergence power spectrum–bispectrum probe and we tackle the numerical challenges required by a realistic analysis. Under the assumption of (multivariate) Gaussian likelihoods, we have developed a high performance code that allows highly parallelized prediction of the binned tomographic observables and of their joint non-Gaussian covariance matrix accounting for terms up to the six-point correlation function and supersample effects. This performance allows us to qualitatively address several interesting scientific questions. We find that the bispectrum provides an improvement in terms of signal-to-noise ratio (S/N) of about 10 per cent on top of the power spectrum, making it a non-negligible source of information for future surveys. Furthermore, we are capable to test the impact of theoretical uncertainties in the halo model used to build our observables; with presently allowed variations we conclude that the impact is negligible on the S/N. Finally, we consider data compression possibilities to optimize future analyses of the weak lensing bispectrum. We find that, ignoring systematics, five equipopulated redshift bins are enough to recover the information content of a Euclid-like survey, with negligible improvement when increasing to 10 bins. We also explore principal component analysis and dependence on the triangle shapes as ways to reduce the numerical complexity of the problem.

The Structure and Properties of MoSi2 Thin Film in Mos Process

1980 ◽  
Vol 38 ◽  
pp. 326-327
Author(s):  
C.K. Wu ◽  
P. Chang ◽  
N. Godinho
Keyword(s):  
Thin Film ◽  
Integrated Circuits ◽  
High Performance ◽  
Large Scale ◽  
Process Development ◽  
Structure And Properties ◽  
Metal Silicides ◽  
High Oxidation ◽  
Important Approach ◽  
High Oxidation Resistance

Recently, the use of refractory metal silicides as low resistivity, high temperature and high oxidation resistance gate materials in large scale integrated circuits (LSI) has become an important approach in advanced MOS process development (1). This research is a systematic study on the structure and properties of molybdenum silicide thin film and its applicability to high performance LSI fabrication.

The Utilization of Ftir (Fourier Transform Infra-Red) Method Combined with Chemometrics For Authentication of Indonesian Coffee Powder

2017 ◽  
Vol 9 (3) ◽  
Author(s):  
Firmansyah A. ◽  
Winingsih W. ◽  
Soebara Y S
Keyword(s):  
Fourier Transform ◽  
Natural Product ◽  
High Performance ◽  
Principal Component ◽  
Raw Material ◽  
Attenuated Total Reflectance ◽  
Coffee Bean ◽  
Product Analysis ◽  
Total Reflectance ◽  
And Cluster Analysis

Analysis of natural product remain challenging issues for analytical chemist, since natural products are complicated system of mixture. The most popular methods of choice used for quality control of raw material and finished product are high performance liquid chromatography (HPLC), gas chromatography (GC) and mass spectrometry (MS). The utilization of FTIR-ATR (Fourier Transform Infrared-Attenuated Total Reflectance) method in natural product analysis is still limited. This study attempts to expand the use of FTIR spectroscopy in authenticating Indonesian coffee powder.The coffee samples studied were taken from nine regions in Indonesia, namely Aceh Gayo, Flores, Kintamani, Mandheling, Papua, Sidikalang, Toraja, Kerinci and Lampung.The samples in the form of coffee bean from various regions were powdered . The next step conducted was to determine the spectrum using the FTIR-ATR (Attenuated Total Reflectance) using ZnSe crystal of 8000 resolution. Spectrum samples, then, were analyzed using chemometrics. The utilized chemometric model was the principal component analysis (PCA) and cluster analysis (CA). Based on the chemometric analysis, there are similarities between Aceh Gayo coffee with Toraja coffee, Mandailing coffee, Kintamani coffee and Flores coffee. Sidikalang coffee has a similarity to Flores coffee; Papua coffee has a similarity to Sidikalang coffee; Lampung coffee has a similarity to Sidikalang coffee, while Kerinci coffee has a similarity to Papua coffee.

RECOMMENDATIONS FOR THE CHOICE OF MILKING INSTALLATIONS IN LOOSE HOUSING SYSTEMS OF COWS

2020 ◽  
Author(s):  
В.В. ГОРДЕЕВ ◽  
В.Е. ХАЗАНОВ
Keyword(s):  
Dairy Cows ◽  
High Performance ◽  
Large Scale ◽  
Dairy Farms ◽  
Economic Indicators ◽  
Technical Level ◽  
Housing Systems ◽  
Working Shift ◽  
Technical And Economic Indicators

При выборе типа доильной установки и ее размера необходимо учитывать максимальное планируемое поголовье дойных коров и размер технологической группы, кратность и время одного доения, продолжительность рабочей смены дояров. Анализ технико-экономических показателей наиболее распространенных на сегодняшний день типов доильных установок одинакового технического уровня свидетельствует, что наилучшие удельные показатели имеет установка типа «Карусель» (1), а установка типа «Елочка» (2) требует более высоких затрат труда и средств. Установка «Параллель» (3) занимает промежуточное положение. Из анализа пропускной способности и количества необходимых операторов: установка 2 рекомендована для ферм с поголовьем дойного стада до 600 голов, 3 — не более 1200 дойных коров, 1 — более 1200 дойных коров. «Карусель» — наиболее рациональный, высокопроизводительный, легко автоматизируемый и, следовательно, перспективный способ доения в залах, особенно для крупных молочных ферм. The choice of the proper type and size of milking installations needs to take into account the maximum planned number of dairy cows, the size of a technological group, the number of milkings per day, and the duration of one milking and the operator's working shift. The analysis of technical and economic indicators of currently most common types of milking machines of the same technical level revealed that the Carousel installation had the best specific indicators while the Herringbone installation featured higher labour inputs and cash costs. The Parallel installation was found somewhere in between. In terms of the throughput and the required number of operators Herringbone is recommended for farms with up to 600 dairy cows, Parallel — below 1200 dairy cows, Carousel — above 1200 dairy cows. Carousel was found the most practical, high-performance, easily automated and, therefore, promising milking system for milking parlours, especially on the large-scale dairy farms.

scholarly journals Statistical and machine learning models for optimizing energy in parallel applications

2019 ◽  
Vol 33 (6) ◽  
pp. 1079-1097 ◽  
Author(s):  
Mark Endrei ◽  
Chao Jin ◽  
Minh Ngoc Dinh ◽  
David Abramson ◽  
Heidi Poxon ◽  
...  
Keyword(s):  
Machine Learning ◽  
Energy Efficiency ◽  
High Performance ◽  
Large Scale ◽  
Energy Use ◽  
Parallel Applications ◽  
Learning Models ◽  
Trade Off ◽  
Time Required ◽  
Machine Learning Models

Rising power costs and constraints are driving a growing focus on the energy efficiency of high performance computing systems. The unique characteristics of a particular system and workload and their effect on performance and energy efficiency are typically difficult for application users to assess and to control. Settings for optimum performance and energy efficiency can also diverge, so we need to identify trade-off options that guide a suitable balance between energy use and performance. We present statistical and machine learning models that only require a small number of runs to make accurate Pareto-optimal trade-off predictions using parameters that users can control. We study model training and validation using several parallel kernels and more complex workloads, including Algebraic Multigrid (AMG), Large-scale Atomic Molecular Massively Parallel Simulator, and Livermore Unstructured Lagrangian Explicit Shock Hydrodynamics. We demonstrate that we can train the models using as few as 12 runs, with prediction error of less than 10%. Our AMG results identify trade-off options that provide up to 45% improvement in energy efficiency for around 10% performance loss. We reduce the sample measurement time required for AMG by 90%, from 13 h to 74 min.

scholarly journals Automated Cytogenetic Biodosimetry at Population-Scale

Radiation ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 79-94
Author(s):  
Peter K. Rogan ◽  
Eliseos J. Mucaki ◽  
Ben C. Shirley ◽  
Yanxin Li ◽  
Ruth C. Wilkins ◽  
...  
Keyword(s):  
High Performance ◽  
Large Scale ◽  
Dicentric Chromosome ◽  
Automated Assignment ◽  
Simulated Population ◽  
Dose Estimation ◽  
Processing Times ◽  
Multiple Processors ◽  
Exposure Levels ◽  
Population Scale

The dicentric chromosome (DC) assay accurately quantifies exposure to radiation; however, manual and semi-automated assignment of DCs has limited its use for a potential large-scale radiation incident. The Automated Dicentric Chromosome Identifier and Dose Estimator (ADCI) software automates unattended DC detection and determines radiation exposures, fulfilling IAEA criteria for triage biodosimetry. This study evaluates the throughput of high-performance ADCI (ADCI-HT) to stratify exposures of populations in 15 simulated population scale radiation exposures. ADCI-HT streamlines dose estimation using a supercomputer by optimal hierarchical scheduling of DC detection for varying numbers of samples and metaphase cell images in parallel on multiple processors. We evaluated processing times and accuracy of estimated exposures across census-defined populations. Image processing of 1744 samples on 16,384 CPUs required 1 h 11 min 23 s and radiation dose estimation based on DC frequencies required 32 sec. Processing of 40,000 samples at 10 exposures from five laboratories required 25 h and met IAEA criteria (dose estimates were within 0.5 Gy; median = 0.07). Geostatistically interpolated radiation exposure contours of simulated nuclear incidents were defined by samples exposed to clinically relevant exposure levels (1 and 2 Gy). Analysis of all exposed individuals with ADCI-HT required 0.6–7.4 days, depending on the population density of the simulation.

scholarly journals Content-Based Estimation of Brain MRI Tilt in Three Orthogonal Directions

2021 ◽  
Author(s):  
Pooja Prabhu ◽  
A. K. Karunakar ◽  
Sanjib Sinha ◽  
N. Mariyappa ◽  
G. K. Bhargava ◽  
...  
Keyword(s):  
Large Scale ◽  
Brain Mri ◽  
Similarity Measures ◽  
Principal Component ◽  
Brain Anatomy ◽  
Morphological Operations ◽  
Mr Images ◽  
Tilt Correction ◽  
Brain Mr Images ◽  
The Brain

AbstractIn a general scenario, the brain images acquired from magnetic resonance imaging (MRI) may experience tilt, distorting brain MR images. The tilt experienced by the brain MR images may result in misalignment during image registration for medical applications. Manually correcting (or estimating) the tilt on a large scale is time-consuming, expensive, and needs brain anatomy expertise. Thus, there is a need for an automatic way of performing tilt correction in three orthogonal directions (X, Y, Z). The proposed work aims to correct the tilt automatically by measuring the pitch angle, yaw angle, and roll angle in X-axis, Z-axis, and Y-axis, respectively. For correction of the tilt around the Z-axis (pointing to the superior direction), image processing techniques, principal component analysis, and similarity measures are used. Also, for correction of the tilt around the X-axis (pointing to the right direction), morphological operations, and tilt correction around the Y-axis (pointing to the anterior direction), orthogonal regression is used. The proposed approach was applied to adjust the tilt observed in the T1- and T2-weighted MR images. The simulation study with the proposed algorithm yielded an error of 0.40 ± 0.09°, and it outperformed the other existing studies. The tilt angle (in degrees) obtained is ranged from 6.2 ± 3.94, 2.35 ± 2.61, and 5 ± 4.36 in X-, Z-, and Y-directions, respectively, by using the proposed algorithm. The proposed work corrects the tilt more accurately and robustly when compared with existing studies.

scholarly journals Adsorption Mechanism of Patulin from Apple Juice by Inactivated Lactic Acid Bacteria Isolated from Kefir Grains

Toxins ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 434
Author(s):  
Pascaline Bahati ◽  
Xuejun Zeng ◽  
Ferdinand Uzizerimana ◽  
Ariunsaikhan Tsoggerel ◽  
Muhammad Awais ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Performance ◽  
Apple Juice ◽  
Adsorption Mechanism ◽  
Health Hazard ◽  
Principal Component ◽  
Poor Quality ◽  
Potential Health ◽  
Potential Health Hazard ◽  
Kefir Grains

In the food industry, microbiological safety is a major concern. Mycotoxin patulin represents a potential health hazard, as it is heat-resistant and may develop at any stage during the food chain, especially in apple-based products, leading to severe effects on human health, poor quality products, and profit reductions. The target of the study was to identify and characterize an excellent adsorbent to remove patulin from apple juice efficiently and to assess its adsorption mechanism. To prevent juice fermentation and/or contamination, autoclaving was involved to inactivate bacteria before the adsorption process. The HPLC (high-performance liquid chromatography) outcome proved that all isolated strains from kefir grains could reduce patulin from apple juice. A high removal of 93% was found for juice having a 4.6 pH, 15° Brix, and patulin concentration of 100 μg/L by Lactobacillus kefiranofacien, named JKSP109, which was morphologically the smoothest and biggest of all isolates in terms of cell wall volume and surface area characterized by SEM (Scanning electron microscopy) and TEM (transmission electron microscopy). C=O, OH, C–H, and N–O were the main functional groups engaged in patulin adsorption indicated by FTIR (Fourier transform–infrared). E-nose (electronic nose) was performed to evaluate the aroma quality of the juices. PCA (Principal component analysis) results showed that no significant changes occurred between control and treated juice.

Sign in / Sign up

Export Citation Format

Share Document