The Analysis of 16MnR Steel Compact Tensile Fatigue Fracture after High Temperature

2012 ◽  
Vol 253-255 ◽  
pp. 341-344
Author(s):  
An Zhong Liu ◽  
Tao Wang ◽  
Su Zhang
Keyword(s):  
Fractal Dimension ◽  
High Temperature ◽  
Crack Initiation ◽  
Fatigue Fracture ◽  
Heating Temperature ◽  
Steel Sample ◽  
Experimental Results ◽  
Tensile Fatigue

In this paper, the test of compact tensile fatigue fracture of 16MnR steel was done after high temperature, and the relation between the proof values Ji at crack initiation of fatigue fracture and fatigue fracture fractal dimension was studied. The experimental results show that the relation between the proof values Ji at crack initiation and the heating temperature. The compact tensile fatigue fracture fractal dimension was changed when 16MnR steel sample was heated to different temperature.

The Fractal Research of 16MnR Steel Fatigue Fracture after High Temperature

2012 ◽  
Vol 568 ◽  
pp. 191-195
Author(s):  
Su Zhang ◽  
An Zhong Liu
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Fractal Dimension ◽  
High Temperature ◽  
Fatigue Fracture ◽  
High Temperatures ◽  
Fractal Dimensions ◽  
Three Dimensions ◽  
Fracture Surfaces ◽  
Computer Picture

In this paper, the computer picture technology was used for recovering three dimensions shape of 16MnR steel fatigue fracture. The fractal dimensions of the 16MnR fatigue fracture surfaces were calculated after high temperatures. The relation between the fractal dimension of fatigue fracture and heating temperatures, the relation between the fatigue mechanical properties and heating temperatures were researched. The relation between the grain size of 16MnR steel and the fractal dimension of fatigue fracture, and the relation between the grain size of 16MnR steel and the fatigue mechanical properties were discussed.

scholarly journals Investigation of the kinetics of spontaneous combustion of the major coal seam in Dahuangshan mining area of the Southern Junggar coalfield, Xinjiang, China

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Li Shen ◽  
Qiang Zeng
Keyword(s):  
Particle Size ◽  
High Temperature ◽  
Coal Seam ◽  
Spontaneous Combustion ◽  
Heating Temperature ◽  
Characteristic Temperature ◽  
Mining Area ◽  
Particle Sizes ◽  
Coal Oxidation ◽  
Increasing Temperature

AbstractIn the present paper, with using diverse methods (including the SEM, the XRD, the TPO, the FTIR, and the TGA) , the authors analysed samples of the major coal seam in Dahuangshan Mining area with different particle sizes and with different heated temperatures (from 50 to 800 °C at regular intervals of 50 °C). The results from SEM and XRD showed that high temperature and high number of pores, fissures, and hierarchical structures in the coal samples could facilitate oxidation reactions and spontaneous combustion. A higher degree of graphitization and much greater number of aromatic microcrystalline structures facilitated spontaneous combustion. The results from TPO showed that the oxygen consumption rate of the coal samples increased exponentially with increasing temperature. The generation rates of different gases indicated that temperatures of 90 °C or 130 °C could accelerate coal oxidation. With increasing temperature, the coal oxidation rate increased, and the release of gaseous products was accelerated. The FTIR results showed that the amount of hydroxide radicals and oxygen-containing functional groups increased with the decline in particle size, indicating that a smaller particle size may facilitate the oxidation reaction and spontaneous combustion of coal. The absorbance and the functional group areas at different particle sizes were consistent with those of the heated coal samples, which decreased as the temperature rose. The results from TGA showed that the characteristic temperature T3 declined with decreasing particle size. After the sample with 0.15–0.18 mm particle size was heated, its carbon content decreased, and its mineral content increased, inhibiting coal oxidation. This result also shows that the activation energy of the heated samples tended to increase at the stage of high-temperature combustion with increasing heating temperature.

Experimental results of the Li-Pb-Pt system obtained by the high temperature drop calorimetry

2021 ◽  
pp. 115824
Author(s):  
S. Terlicka ◽  
A. Dębski ◽  
W. Gąsior ◽  
A. Fornalczyk ◽  
M. Saternus
Keyword(s):  
High Temperature ◽  
Temperature Drop ◽  
Experimental Results ◽  
Drop Calorimetry

Small specimen techniques for estimation of tensile, fatigue, fracture and crack propagation material model parameters

2021 ◽  
pp. 030932472110252
Author(s):  
Julija Kazakeviciute ◽  
James Paul Rouse ◽  
Davide Focatiis ◽  
Christopher Hyde
Keyword(s):  
Fatigue Fracture ◽  
Structural Integrity ◽  
Standard Specimen ◽  
Creep Behaviour ◽  
Parameter Determination ◽  
Model Parameters ◽  
Small Specimen ◽  
Testing Methods ◽  
Advantages And Disadvantages ◽  
Tensile Fatigue

Small specimen mechanical testing is an exciting and rapidly developing field in which fundamental deformation behaviours can be observed from experiments performed on comparatively small amounts of material. These methods are particularly useful when there is limited source material to facilitate a sufficient number of standard specimen tests, if any at all. Such situations include the development of new materials or when performing routine maintenance/inspection studies of in-service components, requiring that material conditions are updated with service exposure. The potentially more challenging loading conditions and complex stress states experienced by small specimens, in comparison with standard specimen geometries, has led to a tendency for these methods to be used in ranking studies rather than for fundamental material parameter determination. Classifying a specimen as ‘small’ can be subjective, and in the present work the focus is to review testing methods that utilise specimens with characteristic dimensions of less than 50 mm. By doing this, observations made here will be relevant to industrial service monitoring problems, wherein small samples of material are extracted and tested from operational components in such a way that structural integrity is not compromised. Whilst recently the majority of small specimen test techniques development have focused on the determination of creep behaviour/properties as well as sub-size tensile testing, attention is given here to small specimen testing methods for determining specific tensile, fatigue, fracture and crack growth properties. These areas are currently underrepresented in published reviews. The suitability of specimens and methods is discussed here, along with associated advantages and disadvantages.

In Situ XRD Study of Zirconia Phase Transformation Produced from Chemical and Mineral Processes

2016 ◽  
Vol 840 ◽  
pp. 375-380
Author(s):  
Meor Yusoff Meor Sulaiman ◽  
Khaironie Mohamed Takip ◽  
Ahmad Khairulikram Zahari
Keyword(s):  
High Temperature ◽  
Heating Temperature ◽  
Tetragonal Zirconia ◽  
Amorphous Structure ◽  
High Temperature Phase ◽  
Temperature Phase ◽  
Zirconyl Chloride ◽  
High Temperature Xrd ◽  
Temperature Phase Transition

The high temperature phase transition of zirconia produced from commercial zirconyl chloride chemical was compared with that produced from a Malaysian zircon mineral. Zirconyl chloride was produced from zircon by using the hydrothermal fusion method. Initial XRD diffractogram of these samples at room temperature show that they are of amorphous structure. High temperature XRD studies was then performed on these samples; heated up to 1500°C. The XRD diffractograms shows that the crystalline structure of tetragonal zirconia was first observed and the monoclinic zirconia becomes more visible at higher heating temperature.

scholarly journals Postheated Model of Confined High Strength Fibrous Concrete

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Kaleem A. Zaidi ◽  
Umesh K. Sharma ◽  
N. M. Bhandari ◽  
P. Bhargava
Keyword(s):  
High Temperature ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
High Strength ◽  
Fibre Volume ◽  
Experimental Results ◽  
Confined Concrete ◽  
Structural Safety ◽  
Stress Strain ◽  
Fibrous Concrete

HSC normally suffers from low stiffness and poor strain capacity after exposure to high temperature. High strength confined fibrous concrete (HSCFC) is being used in industrial structures and other high rise buildings that may be subjected to high temperature during operation or in case of an accidental fire. The proper understanding of the effect of elevated temperature on the stress-strain relationship of HSCFC is necessary for the assessment of structural safety. Further stress-strain model of HSCFC after exposure to high temperature is scarce in literature. Experimental results are used to generate the complete stress-strain curves of HSCFC after exposure to high temperature in compression. The variation in concrete mixes was achieved by varying the types of fibre, volume fraction of fibres, and temperature of exposure from ambient to 800°C. The degree of confinement was kept constant in all the specimens. A comparative assessment of different models on the high strength confined concrete was also conducted at different temperature for the accuracy of proposed model. The proposed empirical stress-strain equations are suitable for both high strength confined concrete and HSCFC after exposure to high temperature in compression. The predictions were found to be in good agreement and well fit with experimental results.

Research on Tool Wear Based on Texture Fractal Dimension

2011 ◽  
Vol 66-68 ◽  
pp. 1163-1166
Author(s):  
Mao Jun Chen ◽  
Zhong Jin Ni ◽  
Liang Fang
Keyword(s):  
Fractal Dimension ◽  
Tool Wear ◽  
Surface Texture ◽  
Manufacturing Systems ◽  
Experimental Results ◽  
Machining Process ◽  
Work Piece ◽  
Automated Manufacturing ◽  
Automated Manufacturing Systems ◽  
Wear Condition

In automated manufacturing systems, one of the most important issues is the detection of tool wear during the machining process. The Hausdorff-Besicovitch (HB) dimension is used to analyze the feature of the surface texture of work-piece in this paper. The value of the fractal dimension of the work-piece surface texture tends to decrease with the machining process, due to the texture becoming more complex and irregular, and the tool wear is also becoming more and more serious. That can describe the inherent relationship between work-piece surface texture and tool wear. The experimental results demonstrate the probability of using the fractal dimension of work-piece surface texture to monitor the tool wear condition.

scholarly journals A Stochastic Model for the Fractal Dimension Estimation of Asphaltenes Aggregation

2019 ◽  
Vol 8 (6) ◽  
pp. 1992-1995
Keyword(s):  
Surface Roughness ◽  
Fractal Dimension ◽  
Stochastic Model ◽  
Production Systems ◽  
Experimental Results ◽  
Crude Oils ◽  
Dimension Estimation ◽  
Maximum Value ◽  
Solids Deposition

Some of the problems associated with the transportation of crude oils are due to the presence of heavy compounds as asphaltene molecules. This work developed a stochastic model that predicts the fractal dimension of the asphaltene aggregates. It was found that the maximum value of the fractal dimension is 1.71, which corresponds to the reported experimental results. The model can be applied as a universal growing behavior for the analysis of surface roughness when solids deposition is observed in the production systems involving crude oils

Sign in / Sign up

Export Citation Format

Share Document