Analysis on Application of New Technology and Material in Package Design

2014 ◽  
Vol 643 ◽  
pp. 352-355
Author(s):  
Wan Qiu Jiang ◽  
Ke Zhang ◽  
De Kun Shen ◽  
Jing Zhang
Keyword(s):  
Everyday Life ◽  
New Technology ◽  
Package Design ◽  
Scientific Technology ◽  
Package Materials

With the daily improving consumption and scientific technology, higher demands on package design are getting even rigorous no matter on industrial or daily products, relevant package materials have appeared with the development of ecological, anti-counterfeiting, buffer and sterile technologies, which severely improves the quality of modern packaging, bringing more convenience and surprise for our everyday life.

Effects and Risks of Distance Learning in Higher Education

2020 ◽  
pp. 61-73
Author(s):  
Yu. M. Tsygalov
Keyword(s):  
Higher Education ◽  
Distance Learning ◽  
Online Education ◽  
New Technology ◽  
Negative Consequences ◽  
Higher Education System ◽  
First Results ◽  
Spread Of Infection ◽  
The Cost

The forced work of Russian universities remotely in the context of the pandemic (COVID-19) has generated a lot of discussion about the benefits of the new form of education. The first results were summed up and reports were presented, the materials of which showed that the main goal of online education — the prevention of the spread of infection, - has been achieved. Against this background, proposals and publications have appeared substantiating the effectiveness of the massive introduction of distance learning in Russia, including in higher education. However, the assessment of such training by the population and students in publications and in social networks was predominantly negative and showed that the number of emerging problems exceeds the possible benefits of the new educational technology. Based on the analysis of the materials of publications and personal experience of teaching online, the potential benefits and problems of distance learning in higher education in Russia are considered. It is proposed to consider the effects separately for the suppliers of new technology (government, universities) and consumers (students, teachers, society). It is substantiated that the massive introduction of online education allows not only to reduce the negative consequences of epidemics, but also to reduce budgetary funding for universities, optimize the age composition of teachers, and reduce the cost of maintaining educational buildings. However, there will be a leveling / averaging of the quality of education, and responsibility for the quality of training will shift from the state/universities to students. The critical shortcomings of online education are the low degree of readiness of the digital infrastructure, the lack of a mechanism for identifying and monitoring the work of students, information security problems, and the lack of trust in such training of the population. The massive use of online education creates a number of risks for the country, the most critical of which is the destruction of the higher education system and a drop in the effectiveness of personnel training. The consequences of this risk realization are not compensated by any possible budget savings.

Musical shape and feeling

2017 ◽  
Author(s):  
Daniel Leech-Wilkinson
Keyword(s):  
Everyday Life ◽  
Recent Work ◽  
Sensory Perception ◽  
Dynamic Processes ◽  
Sensorimotor System ◽  
Musical Sound ◽  
Sensory Mode ◽  
Daniel Stern

The concept of shape is widely used by musicians in talking and thinking about performance, yet the mechanisms that afford links between music and shape are little understood. Work on the psychodynamics of everyday life by Daniel Stern and on embodiment by Mark Johnson suggests relationships between the multiple dynamics of musical sound and the dynamics of feeling and motion. Recent work on multisensory and precognitive sensory perception and on the role of bimodal neurons in the sensorimotor system helps to explain how shape, as a percept representing changing quantity in any sensory mode, may be invoked by dynamic processes at many stages of perception and cognition. These processes enable ‘shape’ to do flexible and useful work for musicians needing to describe the quality of musical phenomena that are fundamental to everyday musical practice and yet too complex to calculate during performance.

scholarly journals Physical Activity and Quality of Life in Hemodialysis Patients and Healthy Controls: A Cross-Sectional Study

2021 ◽  
Vol 18 (4) ◽  
pp. 1978
Author(s):  
Tjaša Filipčič ◽  
Špela Bogataj ◽  
Jernej Pajek ◽  
Maja Pajek
Keyword(s):  
Quality Of Life ◽  
Physical Activity ◽  
Everyday Life ◽  
Habitual Physical Activity ◽  
Healthy Controls ◽  
Age And Gender ◽  
Comorbidity Score ◽  
Sf 36 ◽  
And Gender

Hemodialysis (HD) patients have lower functional abilities compared to healthy people, and this is associated with lower physical activity in everyday life. This may affect their quality of life, but research on this topic is limited. Therefore, the present study aimed to determine the relationship between habitual physical activity and quality of life in HD patients and healthy controls. Ninety-three HD patients and 140 controls participated in the study. Quality of life was assessed using a 36-item medical outcomes study short-form health survey (SF-36). Human Activity Profile (HAP) was used to assess habitual physical activity. The adjusted activity score (AAS) from HAP, age, gender, fat tissue index (FTI), lean tissue index (LTI), and Davies comorbidity score were analyzed as possible predictors of the Physical Component Summary (PCS) of the SF-36. Three sequential linear models were used to model PCS. In Model 1, PCS was regressed by gender and age; in Model 2 the LTI, FTI, and Davies comorbidity scores were added. Model 3 also included AAS. After controlling for age and gender (ModelHD 1: p = 0.056), LTI, FTI, and Davies comorbidity score effects (ModelHD 2: p = 0.181), the AAS accounted for 32% of the variation in PCS of HD patients (ModelHD 3: p < 0.001). Consequently, the PCS of HD patients would increase by 0.431 points if the AAS increased by one point. However, in healthy controls, AAS had a lower impact than in the HD sample (B = 0.359 vs. 0.431), while the corresponding effects of age and gender (ModelH 1: p < 0.001), LTI, FTI, and Davies comorbidity score (ModelH 2: p < 0.001) were adjusted for. The proportion of variation in PCS attributed to AAS was 14.9% (ModelH 3: p < 0.001). The current study results showed that physical activity in everyday life as measured by the HAP questionnaire is associated to a higher degree with the quality of life of HD patients than in healthy subjects. Routine physical activity programs are therefore highly justified, and the nephrology community should play a leading role in this effort.

scholarly journals ECOCAPTURE@HOME: Protocol for the Remote Assessment of Apathy and Its Everyday-Life Consequences

2021 ◽  
Vol 18 (15) ◽  
pp. 7824
Author(s):  
Valérie Godefroy ◽  
Richard Levy ◽  
Arabella Bouzigues ◽  
Armelle Rametti-Lacroux ◽  
Raffaella Migliaccio ◽  
...  
Keyword(s):  
Everyday Life ◽  
New Technologies ◽  
Electrodermal Activity ◽  
Real Life ◽  
Smartphone Application ◽  
Measurement Model ◽  
Strong Impact ◽  
Active Data ◽  
Personalised Treatment

Apathy, a common neuropsychiatric symptom associated with dementia, has a strong impact on patients’ and caregivers’ quality of life. However, it is still poorly understood and hard to define. The main objective of the ECOCAPTURE programme is to define a behavioural signature of apathy using an ecological approach. Within this program, ECOCAPTURE@HOME is an observational study which aims to validate a method based on new technologies for the remote monitoring of apathy in real life. For this study, we plan to recruit 60 couples: 20 patient-caregiver dyads in which patients suffer from behavioral variant Fronto-Temporal Dementia, 20 patient-caregiver dyads in which patients suffer from Alzheimer Disease and 20 healthy control couples. These dyads will be followed for 28 consecutive days via multi-sensor bracelets collecting passive data (acceleration, electrodermal activity, blood volume pulse). Active data will also be collected by questionnaires on a smartphone application. Using a pool of metrics extracted from these passive and active data, we will validate a measurement model for three behavioural markers of apathy (i.e., daytime activity, quality of sleep, and emotional arousal). The final purpose is to facilitate the follow-up and precise diagnosis of apathy, towards a personalised treatment of this condition within everyday life.

Can Innovative Technologies Overcome HbA1c Disparity for African-American Youth with Type 1 Diabetes?

2021 ◽  
pp. 193229682110213
Author(s):  
Stuart Chalew ◽  
Alan M. Delamater ◽  
Sonja Washington ◽  
Jayalakshmi Bhat ◽  
Diane Franz ◽  
...  
Keyword(s):  
Type 1 Diabetes ◽  
Racial Disparity ◽  
Diabetes Management ◽  
New Technology ◽  
African American Youth ◽  
Glucose Monitoring ◽  
Supportive Role

Achieving normal or near-normal glycemic control as reflected by HbA1c levels in patients with type 1 diabetes (T1D) is important for preventing the development and progression of chronic complications. Despite delineation and dissemination of HbA1c management targets and advances in insulin pharmacology, insulin delivery systems, and glucose monitoring, the majority of children with T1D do not achieve HbA1c goals. In particular, African Americans are more likely not to reach HbA1c goals and have persistently higher HbA1c than Non-Hispanic Whites. Availability of pumps and other technology has not eliminated the disparity in HbA1c. Multiple factors play a role in the persisting racial disparity in HbA1c outcome. The carefully designed application and deployment of new technology to help the patient/family and facilitate the supportive role of the diabetes management team may be able to overcome racial disparity in glycemic outcome and improve patient quality of life.

Climate impact of an optimised gas treatment on old landfills

2022 ◽  
pp. 0734242X2110701
Author(s):  
Roland Berger ◽  
Joachim Lehner
Keyword(s):  
New Technology ◽  
Landfill Gas ◽  
Calorific Value ◽  
Climate Impact ◽  
Treatment Technology ◽  
Gas Treatment ◽  
Treatment Measures ◽  
Established Fact ◽  
New Treatment

It is a well-established fact that the quality and quantity of landfill gas (LFG) start declining after a landfill is closed to further waste intake. Conventional gas treatment and utilisation systems such as flares and gas-driven engines require a certain quality of LFG: specifically, a sufficient methane concentration. Various measures are utilised to maintain the necessary quality of LFG, including a turn-down of gas extraction rates and a shutdown of low-quality gas wells, resulting in a decline of LFG production. This, however, does not have to be the case. The low calorific value (LCV) LFG capture and treatment technology developed by e-flox and referred to in this article as ‘LCV LFG System’ can significantly increase the collection rate and the amount of treated methane in an old landfill. This article introduces such new treatment measures, describes gas capture calculation methodologies and presents actual results based on a medium-sized landfill in Germany. The study demonstrates, among other things, that the LCV LFG system can reduce the CO2 avoidance costs to roughly 10 €/tCO2eq. We present this new technology as a quick and straightforward measure of dealing with the climate issues related to methane emissions of old landfills.

Textiles and perishable materials

2018 ◽  
Author(s):  
Johanna Banck-Burgess
Keyword(s):  
Experimental Data ◽  
Everyday Life ◽  
Iron Age ◽  
Raw Materials ◽  
Visual Representations ◽  
Detailed Knowledge ◽  
Textile Production ◽  
Funerary Rituals ◽  
The Status

This chapter challenges traditional views on Iron Age dress. Recent research has greatly enhanced our understanding of how textiles were manufactured in Iron Age Europe. The variety of qualities, textures, techniques, raw materials, colours, and cuts give insights into the detailed knowledge of the craftspeople involved. Textiles used for dress, blankets, or furniture fittings were appreciated not only for their appearance, but also for the quality of the work. In everyday life, their optical qualities were used to express and signal gender, social roles and status, while the labour expended on textiles found in wealthy burials underlines both the status of the deceased and the extent of conspicuous consumption in funerary rituals—for instance, for wrapping grave furniture and goods. The chapter also looks at experimental data showing how labour-intensive textile production was, and the types of clothing and accessories found in different archaeological contexts or depicted in visual representations.

Influence of Roller on Tooth Height of Internal Spline Formed by Spin-Forming

2012 ◽  
Vol 522 ◽  
pp. 268-271
Author(s):  
Ling Yan Sun ◽  
Qin Xiang Xia ◽  
Xiu Quan Cheng ◽  
Bang Yan Ye
Keyword(s):  
New Technology ◽  
Internal Surface ◽  
Height Distribution ◽  
Forming Force ◽  
Nose Radius ◽  
Forming Process ◽  
Element Simulation ◽  
Gear Manufacturing ◽  
Spinning Force

Spin-forming of part with internal tooth is a new technology of the near-net forming in gear manufacturing field. And the main purpose of the parts spin-forming is to shape teeth on the internal surface of blank. In order to improve the forming quality of internal tooth, the effect of roller on tooth height of spline was investigated by processing experiments and finite element simulation. The result indicates that, for full-radius roller, a large nose radius has also witnessed a discernible growth in spinning force and tooth height; considering the uniformity of tooth height distribution of spun part and decrease in forming force, the bio-conical roller is more suitable for this forming process

scholarly journals Pocket Labs Supported IoT Teaching

2018 ◽  
Vol 8 (2) ◽  
pp. 32 ◽  
Author(s):  
Vladimir M Cvjetkovic
Keyword(s):  
University Students ◽  
Everyday Life ◽  
Teaching Practice ◽  
New Technology ◽  
Teaching Experience ◽  
Computing Power ◽  
Teaching Concept ◽  
Regular Text ◽  
Natural Solution ◽  
University Course

IoT is both a concept and a specific platform with large variety of applications that rapidly become inseparable part of everyday life not only improving it, but making it more interesting and fun. ICT based, it is devoted to interactions with environment that are usually not available with traditional ICT equipment and platforms. IoT is at the same time both complementary and compatible with exist-ing non IoT world, which offers computing power and resources to IoT, making it a unique and powerful combination. Pocket Lab is a relatively new teaching concept that supports students’ creativity and initiative allowing for carrying and experimenting with real equipment at a time and place of choice, much like using of regular text books for studying. Although the IoT & Pocket Labs are not nec-essarily interconnected or mutually conditioned, this paper discusses such a real case of teaching practice, where the Pocket Labs are a natural solution for teach-ing of IoT. The paper deals with one semester teaching experience of IoT as a university course. Obtained results and experience may be quite general except for university students profile defined with their previous education and knowledge. Besides the main goal of the course which is an introduction to IoT, some other aims were exploring the students’ motivation for studying of IoT as a new technology and emphasizing the importance of new original ideas and views being as important as mastering the IoT technologies.

Sign in / Sign up

Export Citation Format

Share Document