Fabrication of Chitosan Nanofibers Scaffolds with Small Amount Gelatin for Enhanced Cell Viability

2015 ◽  
Vol 749 ◽  
pp. 220-224 ◽  
Author(s):  
Min Sup Kim ◽  
Sang Jun Park ◽  
Bon Kang Gu ◽  
Chun Ho Kim
Keyword(s):  
Mechanical Properties ◽  
Cell Culture ◽  
Cell Viability ◽  
Dermal Fibroblast ◽  
Fibroblast Cell ◽  
Biological Properties ◽  
Human Dermal Fibroblast ◽  
Initial Contact ◽  
Initial Contact Angle ◽  
Contact Angle Analysis

Chitosan and gelatin has attracted considerable interest owing to its advantageous biological properties such as excellent biocompatibility, biodegradation, and non-toxic properties. In this paper, we investigated the potential of chitosan/gelatin (Chi-Gel) nanofibers mat with enhanced cell viability for use as cell culture scaffolds. The surface morphology, mechanical properties, and initial contact angle analysis of Chi-Gel nanofibers mat were evaluated. The proliferation of human dermal fibroblast cell (HDFs) on Chi-Gel nanofibers mat was found to be approximately 20% higher than the pure chitosan nanofibers mat after 7 days of culture. These results suggest that the Chi-Gel nanofibers mat has great potential for use tissue engineering applications.

scholarly journals Effects of Gelatin Methacrylate Bio-ink Concentration on Mechano-Physical Properties and Human Dermal Fibroblast Behavior

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1930 ◽  
Author(s):  
Ming-You Shie ◽  
Jian-Jr Lee ◽  
Chia-Che Ho ◽  
Ssu-Yin Yen ◽  
Hooi Yee Ng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physical Properties ◽  
Dermal Fibroblast ◽  
Sol Gel ◽  
Biological Properties ◽  
Human Dermal Fibroblast ◽  
Natural Material ◽  
Matrix Remodeling ◽  
Proliferation Markers

Gelatin-methacryloyl (GelMa) is a very versatile biomaterial widely used in various biomedical applications. The addition of methacryloyl makes it possible to have hydrogels with varying mechanical properties due to its photocuring characteristics. In addition, gelatin is obtained and derived from natural material; thus, it retains various cell-friendly motifs, such as arginine-glycine-aspartic acid, which then provides implanted cells with a friendly environment for proliferation and differentiation. In this study, we fabricated human dermal fibroblast cell (hDF)-laden photocurable GelMa hydrogels with varying physical properties (5%, 10%, and 15%) and assessed them for cellular responses and behavior, including cell spreading, proliferation, and the degree of extracellular matrix remodeling. Under similar photocuring conditions, lower concentrations of GelMa hydrogels had lower mechanical properties than higher concentrations. Furthermore, other properties, such as swelling and degradation, were compared in this study. In addition, our findings revealed that there were increased remodeling and proliferation markers in the 5% GelMa group, which had lower mechanical properties. However, it was important to note that cellular viabilities were not affected by the stiffness of the hydrogels. With this result in mind, we attempted to fabricate 5–15% GelMa scaffolds (20 × 20 × 3 mm3) to assess their feasibility for use in skin regeneration applications. The results showed that both 10% and 15% GelMa scaffolds could be fabricated easily at room temperature by adjusting several parameters, such as printing speed and extrusion pressure. However, since the sol-gel temperature of 5% GelMa was noted to be lower than its counterparts, 5% GelMa scaffolds had to be printed at low temperatures. In conclusion, GelMa once again was shown to be an ideal biomaterial for various tissue engineering applications due to its versatile mechanical and biological properties. This study showed the feasibility of GelMa in skin tissue engineering and its potential as an alternative for skin transplants.

scholarly journals An Anti-Inflammatory 2,4-Cyclized-3,4-Secospongian Diterpenoid and Furanoterpene-Related Metabolites of a Marine Sponge Spongia sp. from the Red Sea

Marine Drugs ◽  
2021 ◽  
Vol 19 (1) ◽  
pp. 38
Author(s):  
Chi-Jen Tai ◽  
Chiung-Yao Huang ◽  
Atallah F. Ahmed ◽  
Raha S. Orfali ◽  
Walied M. Alarif ◽  
...  
Keyword(s):  
Red Sea ◽  
Superoxide Anion ◽  
Dermal Fibroblast ◽  
Fibroblast Cell ◽  
Inhibitory Effect ◽  
Human Dermal Fibroblast ◽  
Superoxide Anion Generation ◽  
Potent Inhibitory Effect ◽  
Anti Inflammatory ◽  
New Compounds

Chemical investigation of a Red Sea Spongia sp. led to the isolation of four new compounds, i.e., 17-dehydroxysponalactone (1), a carboxylic acid, spongiafuranic acid A (2), one hydroxamic acid, spongiafuranohydroxamic acid A (3), and a furanyl trinorsesterpenoid 16-epi-irciformonin G (4), along with three known metabolites (−)-sponalisolide B (5), 18-nor- 3,17-dihydroxy-spongia-3,13(16),14-trien-2-one (6), and cholesta-7-ene-3β,5α-diol-6-one (7). The biosynthetic pathway for the molecular skeleton of 1 and related compounds was postulated for the first time. Anti-inflammatory activity of these metabolites to inhibit superoxide anion generation and elastase release in N-formyl-methionyl-leucyl phenylalanine/cytochalasin B (fMLF/CB)-induced human neutrophil cells and cytotoxicity of these compounds toward three cancer cell lines and one human dermal fibroblast cell line were assayed. Compound 1 was found to significantly reduce the superoxide anion generation and elastase release at a concentration of 10 μM, and compound 5 was also found to display strong inhibitory activity against superoxide anion generation at the same concentration. Due to the noncytotoxic activity and the potent inhibitory effect toward the superoxide anion generation and elastase release, 1 and 5 can be considered to be promising anti-inflammatory agents.

scholarly journals Tribological, biocompatibility, and antibiofilm properties of tungsten–germanium coating using magnetron sputtering

2021 ◽  
Vol 32 (1) ◽  
Author(s):  
Mustafa Şükrü Kurt ◽  
Mehmet Enes Arslan ◽  
Ayşenur Yazici ◽  
İlkan Mudu ◽  
Elif Arslan
Keyword(s):  
Cell Culture ◽  
Magnetron Sputtering ◽  
Cell Line ◽  
Borosilicate Glass ◽  
Chromosomal Abnormalities ◽  
Dermal Fibroblast ◽  
Fibroblast Cell ◽  
Antibiofilm Activity ◽  
Borosilicate Glasses

AbstractIn this study, borosilicate glass and 316 L stainless steel were coated with germanium (Ge) and tungsten (W) metals using the Magnetron Sputtering System. Surface structural, mechanical, and tribological properties of uncoated and coated samples were examined using SEM, X-ray diffraction (XRD), energy-dispersive spectroscopy, and tribometer. The XRD results showed that WGe2 chemical compound observed in (110) crystalline phase and exhibited a dense structure. According to the tribological analyses, the adhesion strength of the coated deposition on 316 L was obtained 32.8 N, and the mean coefficient of friction was around 0.3. Biocompatibility studies of coated metallic biomaterials were analyzed on fibroblast cell culture (Primary Dermal Fibroblast; Normal, Human, Adult (HDFa)) in vitro. Hoescht 33258 fluorescent staining was performed to investigate the cellular density and chromosomal abnormalities of the HDFa cell line on the borosilicate glasses coated with germanium–tungsten (W–Ge). Cell viabilities of HDFa cell line on each surface (W–Ge coated borosilicate glass, uncoated borosilicate glass, and cell culture plate surface) were analyzed by using (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) cytotoxicity assay. The antibiofilm activity of W–Ge coated borosilicate glass showed a significant reduction effect on Staphylococcus aureus (ATCC 25923) and Pseudomonas aeruginosa (ATCC 27853) adherence compared to control groups. In the light of findings, tungsten and germanium, which are some of the most common industrial materials, were investigated as biocompatible and antimicrobial surface coatings and recommended as bio-implant materials for the first time.

scholarly journals The Effect of Parietin Isolated From Rheum ribes L on In Vitro Wound Model Using Human Dermal Fibroblast Cells

2019 ◽  
Vol 18 (1) ◽  
pp. 56-64 ◽  
Author(s):  
Gulsah Gundogdu ◽  
Koksal Gundogdu ◽  
Kemal Alp Nalci ◽  
Alper Kursat Demirkaya ◽  
Seymanur Yılmaz Tascı ◽  
...  
Keyword(s):  
Cell Proliferation ◽  
Cell Viability ◽  
Dermal Fibroblast ◽  
Dose Range ◽  
Human Dermal Fibroblast ◽  
Fibroblast Cells ◽  
Wound Model ◽  
Dpph Method ◽  
Pipette Tip

Parietin is one of the well-known anthraquinone compounds that can be extracted from Rheum ribes L. In this study, we aimed to investigate the effects of parietin isolated from Rheum ribes L on an in vitro wound model using human dermal fibroblast cells and compare its effectiveness against zinc. The antioxidant effect of parietin was determined by using the 1,1-diphenyl-2-picrylhydrazine (DPPH) method. Human dermal fibroblast cells were cultured in proculture medium and were kept until 100% confluence was achieved. The wound model was created by using a pipette tip. After that, different concentrations of parietin and zinc (final concentrations in the well to be 5-250 µM and 25-200 µM, respectively) were added into the medium. The proliferation-inducing effect on cell viability was determined by using MTT assay. Images of cells were taken at 0, 12, and 24 hours. According to the DPPH method, parietin exhibited have antioxidant activity. According to the MTT results, parietin exhibited significant proliferation-inducing effect on cell viability in a dose range of 5 to 10 M, and zinc showed significant proliferation-inducing effect on cell viability at dose 50 µM ( P < .05). In addition, the image of cell proliferation was also shown at the same doses at 24 hours. In this study, we claim that parietin induces cell proliferation at low doses in cases of dermal fibroblast loss. In conclusion, parietin as an alternative to zinc in wound healing could be used by clinicians in the future with more extensive studies.

scholarly journals Wound Healing Potential of Spirulina Protein on CCD-986sk Cells

Marine Drugs ◽  
2019 ◽  
Vol 17 (2) ◽  
pp. 130
Author(s):  
Ping Liu ◽  
Jeong-Wook Choi ◽  
Min-Kyeong Lee ◽  
Youn-Hee Choi ◽  
Taek-Jeong Nam
Keyword(s):  
Wound Healing ◽  
Dermal Fibroblast ◽  
Fibroblast Cell ◽  
Underlying Mechanism ◽  
Human Dermal Fibroblast ◽  
Dermal Fibroblasts ◽  
Cyclin Dependent Kinase ◽  
Pi3k Inhibitor Ly294002 ◽  
And Migration ◽  
Proliferation And Migration

Wound healing is a dynamic and complex process. The proliferation and migration of dermal fibroblasts are crucial for wound healing. Recent studies have indicated that the extracts from Spirulina platensis have a positive potential for wound healing. However, its underlying mechanism is not fully understood. Our previous study showed that spirulina crude protein (SPCP) promoted the viability of human dermal fibroblast cell line (CCD-986sk cells). In this study, we further investigated the wound healing effect and corresponding mechanisms of SPCP on CCD-986sk cells. Bromodeoxyuridine (BrdU) assay showed that SPCP promoted the proliferation of CCD-986sk cells. The wound healing assay showed that SPCP promoted the migration of CCD-986sk cells. Furthermore, cell cycle analysis demonstrated that SPCP promoted CCD-986sk cells to enter S and G2/M phases from G0/G1 phase. Western blot results showed that SPCP significantly upregulated the expression of cyclin D1, cyclin E, cyclin-dependent kinase 2 (Cdk2), cyclin-dependent kinase 4 (Cdk4), and cyclin-dependent kinase 6 (Cdk6), as well as inhibited the expression of CDK inhibitors p21 and p27 in CCD-986sk cells. In the meanwhile, SPCP promoted the phosphorylation and activation of phosphoinositide 3-kinase (PI3K) and protein kinase B (Akt). However, the phosphorylation of Akt was significantly blocked by PI3K inhibitor (LY294002), which in turn reduced the SPCP-induced proliferation and migration of CCD-986sk cells. Therefore, the results presenting in this study suggested that SPCP can promote the proliferation and migration of CCD-986sk cells; the PI3K/Akt signaling pathway play a positive and important role in these processes.

Enzymatically crosslinked poly(2-alkyl-2-oxazoline) networks for 3D cell culture

2018 ◽  
Vol 6 (46) ◽  
pp. 7568-7572 ◽  
Author(s):  
Lucca Trachsel ◽  
Nicolas Broguiere ◽  
Jan-Georg Rosenboom ◽  
Marcy Zenobi-Wong ◽  
Edmondo M. Benetti
Keyword(s):  
Mechanical Properties ◽  
Cell Culture ◽  
Cell Viability ◽  
3D Cell Culture ◽  
High Cell ◽  
Tunable Mechanical Properties

Cellularized poly(2-alkyl-2-oxazoline) hydrogels fabricated by sortase-mediated crosslinking feature tunable mechanical properties and enable extremely high cell viability.

Sign in / Sign up

Export Citation Format

Share Document