Potential of Solar Radiation and Ambient Temperature as an Alternative Energy in Perlis

2015 ◽  
Vol 793 ◽  
pp. 323-327
Author(s):  
Y.M. Irwan ◽  
A.R. Amelia ◽  
M. Irwanto ◽  
M. Fareq ◽  
W.Z. Leow ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Solar Radiation ◽  
Ambient Temperature ◽  
Alternative Energy ◽  
Clean Energy ◽  
Energy System ◽  
Monthly Average ◽  
Productive System ◽  
Clean Energy Source ◽  
Great Development

As a renewable energy and clean energy source, solar power has great development potential. This paper presents the potential of solar radiation and ambient temperature characteristics can be used as alternative energy. All data collected using Davis Vantage Pro2 Weather Station at Centre of Engineering for Renewable Energy (CERE) in Kangar, Perlis. All data consist of daily and monthly average was analyzed. The result shows the average solar radiation and ambient temperature is high in the middle of the year 2013 which is from April to September. These results provide useful information for the design of solar energy system in order to plan the productive system.

Hydrogen Storage in Magnesium-Based Alloys

MRS Bulletin ◽  
1999 ◽  
Vol 24 (11) ◽  
pp. 40-44 ◽  
Author(s):  
R.B. Schwarz
Keyword(s):  
Energy Density ◽  
Hydrogen Storage ◽  
Alternative Energy ◽  
Distribution Systems ◽  
Electrical Energy ◽  
Clean Energy ◽  
Energy System ◽  
Liquid Hydrogen ◽  
Rechargeable Batteries ◽  
Oil Crisis

Magnesium can reversibly store about 7.7 wt% hydrogen, equivalent to more than twice the density of liquid hydrogen. This high storage capacity, coupled with a low price, suggests that magnesium and magnesium alloys could be advantageous for use in battery electrodes and gaseous-hydrogen storage systems. The use of a hydrogen-storage medium based on magnesium, combined with a fuel cell to convert the hydrogen into electrical energy, is an attractive proposition for a clean transportation system. However, the advent of such a system will require further research into magnesium-based alloys that form less stable hydrides and proton-conducting membranes that can raise the operating temperature of the current fuel cells.Following the U.S. oil crisis of 1974, research into alternative energy-storage and distribution systems was vigorously pursued. The controlled oxidation of hydrogen to form water was proposed as a clean energy system, creating a need for light and safe hydrogen-storage media. Extensive research was done on inter-metallic alloys, which can store hydrogen at densities of about 1500 cm3-H2 gas/ cm3-hydride, higher than the storage density achieved in liquid hydrogen (784 cm3/cm3 at –273°C) or in pressure tanks (˜200 cm3/cm3 at 200 atm). The interest in metal hydrides accelerated following the development of portable electronic devices (video cameras, cellular phones, laptop computers, tools, etc.), which created a consumer market for compact, rechargeable batteries. Initially, nickel-cadmium batteries fulfilled this need, but their relatively low energy density and the toxicity of cadmium helped to drive the development of higher-energy-density, less toxic, rechargeable batteries.

scholarly journals The Impact of Temporal Complexity Reduction on a 100% Renewable European Energy System with Hydrogen Infrastructure

2019 ◽  
Author(s):  
Dilara Gulcin Caglayan ◽  
Heidi Ursula Heinrichs ◽  
Detlef Stolten ◽  
Martin Robinius
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Alternative Energy ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Promising Alternative ◽  
Renewable Energy System ◽  
Hydrogen Infrastructure ◽  
Storage Technologies ◽  
The Impact

The transition towards a renewable energy system is essential in order to reduce greenhouse gas emissions. The increase in the share of variable renewable energy sources (VRES), which mainly comprise wind and solar energy, necessitates storage technologies by which the intermittency of VRES can be compensated for. Although hydrogen has been envisioned to play a significant role as a promising alternative energy carrier in a future European VRES-based energy concept, the optimal design of this system remains uncertain. In this analysis, a hydrogen infrastructure is posited that would meet the electricity and hydrogen demand for a 100% renewable energy-based European energy system in the context of 2050. The overall system design is optimized by minimizing the total annual cost. Onshore and offshore wind energy, open-field photovoltaics (PV), rooftop PV and hydro energy, as well as biomass, are the technologies employed for electricity generation. The electricity generated is then either transmitted through the electrical grid or converted into hydrogen by means of electrolyzers and then distributed through hydrogen pipelines. Battery, hydrogen vessels and salt caverns are considered as potential storage technologies. In the case of a lull, stored hydrogen can be re-electrified to generate electricity to meet demand during that time period. For each location, eligible technologies are introduced, as well as their maximum capacity and hourly demand profiles, in order to build the optimization model. In addition, a generation time series for VRES has been exogenously derived for the model. The generation profiles of wind energy have been investigated in detail by considering future turbine designs with high spatial resolution. In terms of salt cavern storage, the technical potential for hydrogen storage is defined in the system as the maximum allowable capacity per region. Whether or not a technology is installed in a region, the hourly operation of these technologies, as well as the cost of each technology, are obtained within the optimization results. It is revealed that a 100 percent renewable energy system is feasible and would meet both electricity demand and hydrogen demand in Europe.

Energy Production and Consumption Patterns and Planning: A Case of Northeast Minnesota

2007 ◽  
Vol 18 (3-4) ◽  
pp. 373-392
Author(s):  
Felix Amenumey ◽  
Melissa Pawlisch ◽  
Okechukwu Ukaga
Keyword(s):  
Renewable Energy ◽  
Energy Production ◽  
Energy Resource ◽  
Cost Effective ◽  
Clean Energy ◽  
Energy System ◽  
Technical Expertise ◽  
Production And Consumption ◽  
Energy Projects ◽  
Set Up

The Clean Energy Resource Teams (CERTs) is a project designed to give local citizens and other stakeholders a voice in planning and determining their energy future. In total, there are seven CERTs operating in seven regions across Minnesota, USA. CERTs connect citizens with technical expertise to facilitate planning and implementation of energy conservation and renewable energy projects. These technical resources are helping the teams identify and prioritize the most appropriate and cost-effective opportunities within their regions. This paper will describe one of these energy teams (the Northeast CERT) and its efforts in promoting clean energy production and conservation. A key product of the Northeast CERT is a strategic energy plan that highlights the region's top energy priorities. As part of its project priorities, the Northeast Minnesota CERT is working to set up demonstration projects at every school and community in the region. Toward this goal, the team is currently collaborating with two schools in the region to set up renewable energy projects such as wind and solar, which in turn would help students to understand that renewables and conservation can and should be an integral part of our energy system.

scholarly journals Feasibility Analysis and Simulation of Integrated Renewable Energy System for Power Generation: A Hypothetical Study of Rural Health Clinic

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Vincent Anayochukwu Ani ◽  
Bahijjahtu Abubakar
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Rural Health ◽  
Clean Energy ◽  
Energy System ◽  
Feasibility Analysis ◽  
Health Clinic ◽  
Simulation And Optimization ◽  
Renewable Energy System ◽  
Electrical Generation

This paper presents the feasibility analysis and study of integrated renewable energy (IRE) using solar photovoltaic (PV) and wind turbine (WT) system in a hypothetical study of rural health clinic in Borno State, Nigeria. Electrical power consumption and metrology data (such as solar radiation and wind speed) were used for designing and analyzing the integrated renewable energy system. The health clinic facility energy consumption is 19 kWh/day with a 3.4 kW peak demand load. The metrological data was collected from National Aeronautics and Space Administration (NASA) website and used to analyze the performance of electrical generation system using HOMER program. The simulation and optimization results show that the optimal integrated renewable energy system configuration consists of 5 kW PV array, BWC Excel-R 7.5 kW DC wind turbine, 24 unit Surrette 6CS25P battery cycle charging, and a 19 kW AC/DC converter and that the PV power can generate electricity at 9,138 kWh/year while the wind turbine system can generate electricity at 7,490 kWh/year, giving the total electrical generation of the system as 16,628 kWh/year. This would be suitable for deployment of 100% clean energy for uninterruptable power performance in the health clinic. The economics analysis result found that the integrated renewable system has total NPC of 137,139 US Dollar. The results of this research show that, with a low energy health facility, it is possible to meet the entire annual energy demand of a health clinic solely through a stand-alone integrated renewable PV/wind energy supply.

Evaluation of Hybrid Nuclear Energy Systems

2016 ◽  
Author(s):  
Robin J. McDaniel
Keyword(s):  
Carbon Dioxide ◽  
Hybrid Systems ◽  
Electricity Generation ◽  
Alternative Energy ◽  
Nuclear Power ◽  
Nuclear Energy ◽  
Energy Systems ◽  
Clean Energy ◽  
Energy System ◽  
System Component

Small Modular Reactor (SMR) technologies have been recently deemed by the DOE as clean energy, a low carbon-dioxide emitting “alternative energy” source. Recent UN Sustainability Goals and Global Climate Talks to reduce the anthropomorphic Carbon-Dioxide atmospheric concentrations signal a renewed interest and need for nuclear power. The objective of this paper is to present an improved approach to the evaluation of “Hybrid Nuclear Energy Systems”. A hybrid energy system is defined as an energy system that utilizes two or more sources of energy to be used in single or multiple applications. Traditional single sourced energy or power systems require the amount of energy creation and the production of usable power to be carefully balanced. With the introduction of multiple energy sources, loads, and energy capacitors, the design, simulation, and operation of such hybrid systems requires a new approach to analysis and control. This paper introduces three examples of “Hybrid Nuclear Energy Systems”, for large scale power, industrial heat, and electricity generation. The system component independence, reliability, availability, and dynamic control aspects, coupled with component operational decisions presents a new way to optimize energy production and availability. Additional novel hybrid hydro-nuclear systems, concentrated solar-nuclear power desalination systems, and nuclear-insitu petroleum extraction systems are compared. The design aspects of such hybrid systems suitable for process heat, electricity generation, and/or desalination applications are discussed. After a multiple-year research study of past hybrid reactor designs and recent system proposals, the following design evaluation approach is the result of analysis of the best concepts discovered. This review of existing literature has summerized that postulated benefits of Hybrid Nuclear Sytems are; reduced greenhouse gas emissions, increased energy conversion efficiency, high reliability of electricity supply and consistent power quality, reduced fossil fuel dependence, less fresh water consumption, conversion of local coal or shale into higher value fuels, while lowering the risks and costs. As these proposed hybrid systems are interdisciplinary in nature, they will require a new multidisciplinary approach to systems evaluation.

scholarly journals Clean Energy for Cooling and Heating with Ground Source Heat Pumps

2019 ◽  
Vol 3 (2) ◽  
Keyword(s):  
Renewable Energy ◽  
Alternative Energy ◽  
Renewable Energy Sources ◽  
Clean Energy ◽  
Heat Pumps ◽  
Hot Water ◽  
Energy Sources ◽  
Ground Source Heat Pumps ◽  
Heating And Cooling ◽  
Ground Source

In the recent attempts to stimulate alternative energy sources for heating and cooling of buildings, emphasise has been put on utilisation of the ambient energy from ground source heat pump systems (GSHPs) and other renewable energy sources. Exploitation of renewable energy sources and particularly ground heat in buildings can significantly contribute towards reducing dependency on fossil fuels. The study was carried out at the Energy Research Institute (ERI), between September 2016 and November 2017. This paper highlights the potential energy saving that could be achieved through use of ground energy source. The main concept of this technology is that it uses the lower temperature of the ground (approximately <32°C), which remains relatively stable throughout the year, to provide space heating, cooling and domestic hot water inside the building area. The purpose of this study, however, is to examine the means of reducing of energy consumption in buildings, identifying GSHPs as an environmental friendly technology able to provide efficient utilisation of energy in the buildings sector, promoting the use of GSHPs applications as an optimum means of heating and cooling, and presenting typical applications and recent advances of the DX GSHPs. It is concluded that the direct expansion of GSHP are extendable to more comprehensive applications combined with the ground heat exchanger in foundation piles and the seasonal thermal energy storage from solar thermal collectors. This study highlights the energy problem and the possible saving that can be achieved through the use of the GSHP systems. This article discusses the principle of the ground source energy, varieties of GSHPs, and various developments.

scholarly journals Generating Artificial Weather Data Sequences for Solar Distillation Numerical Simulations

2021 ◽  
Author(s):  
Bao The Nguyen
Keyword(s):  
Solar Radiation ◽  
Ambient Temperature ◽  
Simulation Program ◽  
Weather Data ◽  
Data Series ◽  
Monthly Average ◽  
Radiation Data ◽  
Solar Distillation ◽  
Irradiance Data ◽  
Tropical Climates

According to the natural geographical distribution, developing countries are concentrated in tropical climates, where radiation is abundant. So the use of solar energy is a sustainable solution for developing countries. However, daily or hourly measured solar irradiance data for designing or running simulations for solar systems in these countries is not always available. Therefore, this chapter presents a model to calculate the daily and hourly radiation data from the monthly average daily radiation. First, the chapter describes the application of Aguiar’s model to the calculation of daily radiation from average daily radiation data. Next, the chapter presents an improved Graham model to generate hourly radiation data series from monthly radiation. The above two models were used to generate daily and hourly radiation data series for Ho Chi Minh City and Da Nang, two cities representing two different tropical climates. The generated data series are tested by comparing the statistical parameters with the measured data series. Statistical comparison results show that the generated data series have acceptable statistical accuracy. After that, the generated radiation data series continue to be used to run the simulation program to calculate the solar water distillation system and compare the simulation results with the radiation data. Measuring radiation. The comparison results once again confirm the accuracy of the solar irradiance data generation model in this study. Especially, the model to generate the sequences of hourly solar radiation values proposed in this study is much simpler in comparison to the original model of Graham. In addition, a model to generate hourly ambient tempearure date from monthly average daily ambient temperature is also presented and tested. Then, both generated hourly solar radiation and ambient temperature sequences are used to run a solar dsitillation simulation program to give the outputs as monthly average daily distillate productivities. Finally, the outputs of the simulation program running with the generated solar radiation and ambient temperature data are compared with those running with measured data. The errors of predicted monthly average daily distillate productivities between measured and generated weather data for all cases are acceptably low. Therefore, it can be concluded that the model to generate artificial weather data sequences in this study can be used to run any solar distillation simulation programs with acceptable accuracy.

scholarly journals Solar Energy Use in Dryers as an Alternative Energy Source in Agriculture

2010 ◽  
Vol 67 (1) ◽  
Author(s):  
Mirela MILITARU ◽  
Elena POSTELNICU ◽  
Mihai CHIŢOIU ◽  
Valentin VLĂDUŢ
Keyword(s):  
Energy Source ◽  
Solar Energy ◽  
Alternative Energy ◽  
Energy Use ◽  
Clean Energy ◽  
Energy Sources ◽  
Negative Effects ◽  
Alternative Energy Source ◽  
Different Types ◽  
Clean Energy Source

Solar energy represents one of the future energy sources with a high potential, used as an alternative to conventional methods, especially during summer. The advantages of using solar energy are multiple, this type of energy being virtually endless and free, and its use has no negative effects on the environment, being regarded as a clean energy source. Solar energy has multiple applications in agriculture, one of its benefits being that it is used for dryers as an alternative energy source, especially in regions with a high solar potential. In this paper different types of fruits and vegetable dryers, nationally and abroad are presented, as well as results obtained from different methods of solar dryers.

scholarly journals Analysis of the prospects for the development of alternative energy sources in Kazakhstan

2020 ◽  
Vol 78 (4) ◽  
pp. 316-325
Keyword(s):  
Renewable Energy ◽  
Alternative Energy ◽  
Statistical Data ◽  
Energy System ◽  
Energy Sources ◽  
Rural Settlements ◽  
Alternative Energy Sources ◽  
Foreign Countries ◽  
The Republic ◽  
Desert Zone

The article analyzes the problems of the development of alternative energy sources in the energy system of Kazakhstan and substantiates the prospects for their introduction in small settlements located in the desert zone. The principles of operation of wind and solar installations used in the territory of Kazakhstan, including in rural settlements, are described. A comparison of the current statistical data of the Republic of Kazakhstan and foreign countries for 2019-2020 is carried out. in the field of the introduction of renewable energy. The possibilities of introducing alternative energy sources in Kazakhstan are considered, subject to the application of flexible tariff mechanisms, state priority when reserving territories for the construction of renewable energy facilities.

Renewable Energy Sources Management and Role of Ecological Parks

2019 ◽  
pp. 220-228
Author(s):  
Biljana Stojan Ilic
Keyword(s):  
Sustainable Development ◽  
Renewable Energy ◽  
Alternative Energy ◽  
Renewable Energy Sources ◽  
Clean Energy ◽  
Modern Technology ◽  
The State ◽  
Energy Resources ◽  
Renewable Energy Resources ◽  
Industrial Parks

On the global level, governments are leading the national policy for development of modern technology and alternative energy resources. The tendencies of sustainable development are reflected in the realization of using renewable energy resources that contribute to a more diversified and more efficient use of clean energy. The aim of this chapter is to represent adequate responses to the efficient management at the state level that created all necessary conditions for sustainable development and energy efficiency using renewable energy resources in countries of European Union. Legal regulations, energy policy, short, medium and long-term strategy with a stimulating policy, can contribute for achieving adequate results in terms of sustainable development. The aims of this policy would be reflected in the development of eco-industrial parks and clean energy that contribute development of new companies, employment, on the state budget and local government levels.

Sign in / Sign up

Export Citation Format

Share Document