Numerical Analysis of a Torch-Ignition System for an Internal Combustion Engine

2015 ◽  
Vol 798 ◽  
pp. 234-238
Author(s):  
Fábio Radicchi ◽  
Raphael M. Braga ◽  
Raniro A. Coelho ◽  
Roberto B.R. Costa ◽  
Ramon Molina Valle
Keyword(s):  
Fluid Flow ◽  
Numerical Analysis ◽  
3D Model ◽  
Combustion Engine ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
Flow Investigation ◽  
Pollutants Emission ◽  
Turbulence Parameters

Torch ignition systems in spark-ignition engines represents an interesting option in the efforts to reduce pollutants emission and specific fuel consumption. Based on this idea, this paper presents a 3D model of a prechamber created for a spark-ignition engine and focuses on the numerical analysis of the fluid flow inside the modified chamber. This kind of analysis is very important once it allowed evaluating aspects like turbulence parameters, pressure inside the chamber and prechamber, fluid recirculation and a possible prechamber’s geometry for the engine. The studies were done in a four valve Single Cylinder Research Engine – SCRE. For the numerical modeling and fluid flow investigation was used STAR-CD software. Results show higher values of tumble ratio and kinetic energy with the prechamber.

scholarly journals Performance and Exhaust Emissions of a Spark Ignition Internal Combustion Engine Fed with Butanol–Glycerol Blend

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6473
Author(s):  
Stanislaw Szwaja ◽  
Michal Gruca ◽  
Michal Pyrc ◽  
Romualdas Juknelevičius
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Engine Performance ◽  
Internal Combustion ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
Exhaust Temperature ◽  
Indicated Mean Effective Pressure

Investigation of a new type of fuel for the internal combustion engine, which can be successfully used in both the power generation and the automotive industries, is presented in this article. The proposed fuel is a blend of 75% n-butanol and 25% glycerol. The engine tests conducted with this glycerol–butanol blend were focused on the performance, combustion thermodynamics, and exhaust emissions of a spark-ignition engine. A comparative analysis was performed to find potential similarities and differences in the engine fueled with gasoline 95 and the proposed glycerol–butanol blend. As measured, CO exhaust emissions increased, NOx emissions decreased, and UHC emissions were unchanged for the glycerol–butanol blend when compared to the test with sole gasoline. As regards the engine performance and combustion progress, no significant differences were observed. Exhaust temperature remarkably decreased by 3.4%, which contributed to an increase in the indicated mean effective pressure by approximately 4% compared to gasoline 95. To summarize, the proposed glycerol–butanol blend can be directly used as a replacement for gasoline in internal combustion spark-ignition engines.

scholarly journals Comparative analysis of the fluid dynamic efficiency of standard and alternative intake strategies for multivalve spark-ignition engines

2013 ◽  
Vol 2 (2) ◽  
pp. 140 ◽  
Author(s):  
Angelo Algieri
Keyword(s):  
Combustion Engine ◽  
Fluid Dynamic ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Valve Lift ◽  
Spark Ignition Engines ◽  
Dynamic Efficiency ◽  
Noticeable Effect ◽  
Dynamic Performances ◽  
Experimental Characterisation

The work aims at investigating the fluid dynamic performances of a multivalve spark-ignition engine and at evaluating the influence of the throttling process on the engine permeability. To this purpose, a production four-stroke internal combustion engine is analysed during the intake phase. The experimental characterisation is carried out at the steady flow rig in terms of dimensionless discharge and flow coefficients. The global investigation illustrates the noticeable effect of the valve lift on the engine head breathability. Furthermore, the experimental analysis demonstrates that the throttling process has a significant influence on the volumetric efficiency of the intake system and this effect increases with the valve lift. Finally, alternative strategies are studied in order to improve the engine fluid dynamic efficiency at partial loads. Specifically, the research shows that inlet valve deactivation and the adoption of asymmetric intake valve lifts assure an increase in head permeability.

scholarly journals Performance and Emissions of a Premixed Combustion Engine Fueled by Methanol–Gasoline Blends

2020 ◽  
Author(s):  
Jibai Wang ◽  
Peng Zhang ◽  
Chunhua Zhang ◽  
Zheng Jing
Keyword(s):  
Internal Combustion Engines ◽  
Volume Fraction ◽  
Combustion Engine ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Combustion Engines ◽  
Spark Ignition Engines ◽  
Promising Alternative ◽  
Soot Precursors ◽  
Performance And Emissions

Abstract Background: Methanol is abundant, safe, and environmentally friendly and has physicochemical properties similar to those of gasoline. It is a promising alternative fuel in China because it can be directly used in both spark- and compression-ignition internal combustion engines. The current development of spark-ignition engines focuses on the reduction of the fuel volume and increase in the compression ratio (CR), which would benefit the engine’s thermal efficiency. However, increasing the CR may deteriorate particulate matter (PM) due to the high temperature.Methods: Herein, an experimental study was conducted on methanol–gasoline blends in a spark-ignition engine. We examined the performance and formaldehyde emissions of methanol–gasoline blends by using three volume fractions (M0, M15, and M100). In addition, the effects of the CR on PM emissions were investigated.Results: The following relationships were observed: (1) When methanol was blended with gasoline, the formaldehyde emissions increased significantly. The formaldehyde emissions of 100% methanol were higher than those of the methanol–gasoline blend with a methanol volume fraction of 15%; both of these emissions were higher than those of pure gasoline; (2) Increasing the CR resulted in increased PM emissions; (3) For a given blending ratio, the PM emissions were positively correlated with the CR; and (4) The PM emissions were negatively correlated with the methanol volume fraction.Conclusions: Methanol reduces the heat loss at the wall surface. As the ratio of methanol in gasoline increases, the PM emissions decrease. On the other hand, the PM emissions are positively correlated with the CR. The addition of lower alcohols dilutes the concentrations of soot precursors, thereby reducing the soot emissions.

Numerical Analysis of the Fluid Flow in a Prechamber for a Spark-ignition Engine

2015 ◽  
Author(s):  
Fábio de Castro Radicchi ◽  
Raphael Meireles Braga ◽  
Raniro de Oliveira Alvarenga Coelho ◽  
Roberto Berlini Rodrigues da Costa ◽  
Ramón Molina Valle
Keyword(s):  
Fluid Flow ◽  
Numerical Analysis ◽  
Spark Ignition ◽  
Spark Ignition Engine

scholarly journals Ethanol/Gasoline Blends as Alternative Fuel in Last Generation Spark-Ignition Engines: A Review on CO and HC Engine Out Emissions

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4034
Author(s):  
Paolo Iodice ◽  
Massimo Cardone
Keyword(s):  
Physicochemical Properties ◽  
Alternative Fuels ◽  
Experimental Studies ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
The Impact

Among the alternative fuels existing for spark-ignition engines, ethanol is considered worldwide as an important renewable fuel when mixed with pure gasoline because of its favorable physicochemical properties. An in-depth and updated investigation on the issue of CO and HC engine out emissions related to use of ethanol/gasoline fuels in spark-ignition engines is therefore necessary. Starting from our experimental studies on engine out emissions of a last generation spark-ignition engine fueled with ethanol/gasoline fuels, the aim of this new investigation is to offer a complete literature review on the present state of ethanol combustion in last generation spark-ignition engines under real working conditions to clarify the possible change in CO and HC emissions. In the first section of this paper, a comparison between physicochemical properties of ethanol and gasoline is examined to assess the practicability of using ethanol as an alternative fuel for spark-ignition engines and to investigate the effect on engine out emissions and combustion efficiency. In the next section, this article focuses on the impact of ethanol/gasoline fuels on CO and HC formation. Many studies related to combustion characteristics and exhaust emissions in spark-ignition engines fueled with ethanol/gasoline fuels are thus discussed in detail. Most of these experimental investigations conclude that the addition of ethanol with gasoline fuel mixtures can really decrease the CO and HC exhaust emissions of last generation spark-ignition engines in several operating conditions.

scholarly journals Numerical study on the effects of intake charge on oxy-fuel combustion in a dual-injection spark ignition engine at economical oxygen-fuel ratios

2021 ◽  
pp. 146808742110222
Author(s):  
Xiang Li ◽  
Yiqiang Pei ◽  
Zhijun Peng ◽  
Tahmina Ajmal ◽  
Khaqan-Jim Rana ◽  
...  
Keyword(s):  
Combustion Engine ◽  
Numerical Study ◽  
Carbon Capture And Storage ◽  
Spark Ignition ◽  
Fuel Combustion ◽  
Spark Ignition Engine ◽  
Gasoline Direct Injection ◽  
Brake Mean Effective Pressure ◽  
Dual Injection ◽  
Injection Strategies

In order to decrease Carbon Dioxide (CO2) emissions, Oxy-Fuel Combustion (OFC) technology with Carbon Capture and Storage (CCS) is being developed in Internal Combustion Engine (ICE). In this article, a numerical study about the effects of intake charge on OFC was conducted in a dual-injection. Spark Ignition (SI) engine, with Gasoline Direct Injection (GDI), Port Fuel Injection (PFI) and P-G (50% PFI and 50% GDI) three injection strategies. The results show that under OFC with fixed Oxygen Mass Fraction (OMF) and intake temperature, the maximum Brake Mean Effective Pressure (BMEP) is each 5.671, 5.649 and 5.646 bar for GDI, P-G and PFI strategy, which leads to a considerable decrease compared to Conventional Air Combustion (CAC). [Formula: see text], [Formula: see text] and [Formula: see text] of PFI are the lowest among three injection strategies. With intake temperature increases from 298 to 378 K, the reduction of BMEP can be up to 12.68%, 12.92% and 12.75% for GDI, P-G and PFI, respectively. Meantime, there is an increase of about 3% in Brake Specific Fuel Consumption (BSFC) and Brake Specific Oxygen Consumption (BSOC). Increasing OMF can improve the performance of BMEP and BSFC, and the trend is more apparent under GDI strategy. Besides, an increasing tendency can be observed for cylinder pressure and in-cylinder temperature under all injection strategies with the increase of OMF.

Laminar flame speed correlations for methane, ethane, propane and their mixtures, and natural gas and gasoline for spark-ignition engine simulations

2017 ◽  
Vol 18 (9) ◽  
pp. 951-970 ◽  
Author(s):  
Riccardo Amirante ◽  
Elia Distaso ◽  
Paolo Tamburrano ◽  
Rolf D Reitz
Keyword(s):  
Natural Gas ◽  
Laminar Flame ◽  
Spark Ignition ◽  
Flame Speed ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Computational Time ◽  
Laminar Flame Speed ◽  
Spark Ignition Engines ◽  
Empirical Correlations

The laminar flame speed plays an important role in spark-ignition engines, as well as in many other combustion applications, such as in designing burners and predicting explosions. For this reason, it has been object of extensive research. Analytical correlations that allow it to be calculated have been developed and are used in engine simulations. They are usually preferred to detailed chemical kinetic models for saving computational time. Therefore, an accurate as possible formulation for such expressions is needed for successful simulations. However, many previous empirical correlations have been based on a limited set of experimental measurements, which have been often carried out over a limited range of operating conditions. Thus, it can result in low accuracy and usability. In this study, measurements of laminar flame speeds obtained by several workers are collected, compared and critically analyzed with the aim to develop more accurate empirical correlations for laminar flame speeds as a function of equivalence ratio and unburned mixture temperature and pressure over a wide range of operating conditions, namely [Formula: see text], [Formula: see text] and [Formula: see text]. The purpose is to provide simple and workable expressions for modeling the laminar flame speed of practical fuels used in spark-ignition engines. Pure compounds, such as methane and propane and binary mixtures of methane/ethane and methane/propane, as well as more complex fuels including natural gas and gasoline, are considered. A comparison with available empirical correlations in the literature is also provided.

scholarly journals Numerical Study of Engine Performance and Emissions for Port Injection of Ammonia into a Gasoline\Ethanol Dual-Fuel Spark Ignition Engine

2021 ◽  
Vol 11 (4) ◽  
pp. 1441
Author(s):  
Farhad Salek ◽  
Meisam Babaie ◽  
Amin Shakeri ◽  
Seyed Vahid Hosseini ◽  
Timothy Bodisco ◽  
...  
Keyword(s):  
Numerical Study ◽  
Combustion Process ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Combustion Model ◽  
Dual Fuel ◽  
Spark Ignition Engines ◽  
Performance And Emissions ◽  
Hc Emissions

This study aims to investigate the effect of the port injection of ammonia on performance, knock and NOx emission across a range of engine speeds in a gasoline/ethanol dual-fuel engine. An experimentally validated numerical model of a naturally aspirated spark-ignition (SI) engine was developed in AVL BOOST for the purpose of this investigation. The vibe two zone combustion model, which is widely used for the mathematical modeling of spark-ignition engines is employed for the numerical analysis of the combustion process. A significant reduction of ~50% in NOx emissions was observed across the engine speed range. However, the port injection of ammonia imposed some negative impacts on engine equivalent BSFC, CO and HC emissions, increasing these parameters by 3%, 30% and 21%, respectively, at the 10% ammonia injection ratio. Additionally, the minimum octane number of primary fuel required to prevent knock was reduced by up to 3.6% by adding ammonia between 5 and 10%. All in all, the injection of ammonia inside a bio-fueled engine could make it robust and produce less NOx, while having some undesirable effects on BSFC, CO and HC emissions.

3D CFD Simulations of Hydrogen Fuelled Spark Ignition Engine

2008 ◽  
Author(s):  
Dinesh D. Adgulkar ◽  
N. V. Deshpande ◽  
S. B. Thombre ◽  
I. K. Chopde
Keyword(s):  
Internal Combustion Engine ◽  
Power Output ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Flame Speed ◽  
Spark Ignition Engine ◽  
Cfd Simulations ◽  
Turbulent Flame Speed ◽  
Combustion Of Hydrogen

By supporting hydrogen as an alternative fuel to the conventional fuel i.e. gasoline, new era of renewable and carbon neutral energy resources can be introduced. Hence, development of hydrogen fuelled internal combustion engine for improved power density and less emission of NOx has become today’s need and researchers are continuously extending their efforts in the improvement of hydrogen fuelled internal combustion engine. In this work, three dimensional CFD simulations were performed using CFD code (AVL FIRE) for premixed combustion of hydrogen. The simplified 3D geometry of engine with single valve i.e. inlet valve was considered for the simulation. Various combustion models for spark ignition for hydrogen i.e. Eddy Breakup model, Turbulent Flame Speed Closure Combustion Model, Coherent Flame model, Probability Density Function model were tested and validated with available simulation results. Results obtained in simulation indicate that the properties of hydrogen i.e. high flame speed, wide flammability limit, and high ignition temperature are among the main influencing factors for hydrogen combustion being different than that of gasoline. Different parameters i.e. spark advance angle (TDC to 40° before TDC in the step of 5°), rotational speed (1200 to 3000 rpm in the step of 300 rpm), equivalence ratio (0.5 to 1.2 in the step of 0.1), and compression ratio (8, 9 and 10) were used to simulate the combustion of hydrogen in spark ignition engine and to investigate their effects on the engine performance, which is in terms of pressure distribution, temperature distribution, species mass fraction, reaction progress variable and rate of heat release for complete cycle. The results of power output for hydrogen were also compared with that of gasoline. It has been observed that power output for hydrogen is almost 12–15% less than that of gasoline.

Sign in / Sign up

Export Citation Format

Share Document