Kinetic Study for Biosorption of Malachite Green from Aqueous Solution by Pretreated PeniciIlium sp.

2011 ◽  
Vol 80-81 ◽  
pp. 421-425
Author(s):  
Li Fang Zhang ◽  
Ying Ying Chen ◽  
Shu Juan Dai
Keyword(s):  
Aqueous Solution ◽  
Malachite Green ◽  
Second Order ◽  
Order Kinetic ◽  
Biosorption Process ◽  
Initial Ph ◽  
Intra Particle Diffusion ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Pretreated Biomass

In this study, the biosorption of Malachite Green, a cationic dye from aqueous solution onto pretreated biomass of Penicilium sp. was examined. The biosorption studies were carried out under various parameters such as initial pH, contact time and initial dye concentration. The experimental results show that optimum pH for efficient dye biosorption was found to be 5.0-6.0 for pretreated biomass. The bosorption capacity was increased with the increasing initial dye concentration in studied dye concentration range. The kinetic data obtained at different concentrations were analyzed using pseudo-first-order, pseudo-second-order and intra-particle diffusion models. It was obtained that the biosorption process followed the pseudo-second-order kinetic model.

Biosorption of Cr(VI) from Aqueous Solution by Aspergillus Niger

2011 ◽  
Vol 236-238 ◽  
pp. 155-158
Author(s):  
Li Fang Zhang ◽  
Shu Juan Dai ◽  
Ying Ying Chen
Keyword(s):  
Aqueous Solution ◽  
Aspergillus Niger ◽  
Contact Time ◽  
Correlation Coefficients ◽  
Second Order ◽  
Order Kinetic ◽  
Chromium Vi ◽  
Biosorption Process ◽  
Initial Ph ◽  
Pseudo Second Order

In this study, Biosorption of hexavalent chromium ions from aqueous solution by using biomass ofAspergillus nigerwas investigated. Different parameters such as initial pH, biosorbent amount, contact time and temperature were explored. The biosorption of Cr (VI) ions was highly pH dependent and the optimum pH for biosorption of Cr (VI) ions was found to be 2.0. Biosorption capacity of Cr (VI) ions decreased with increased biosorbent dosage. The biosorption equilibrium was established in about 120min of contact time. Equilibrium uptake of Cr (VI) ions onto biomass increased from 12.57 mg/g at 20°C to 19.48 mg/g at 40 °C for 20mg/L Cr (VI) ions concentration. The biosorption process followed the pseudo-second order kinetic model and the correlation coefficients from the pseudo-second order model were all higher than 0.997 in all studied temperatures. These results suggest that the biomass ofAspergillus nigeris a promising biosorbent for removal of chromium (VI) ions from the wastewater.

scholarly journals Bioremediation of Ni2+, Cd2+ and Pb2+ from aqueous solution using chemically modified Newbouldia Leavis seed pod. Kinetics and Intraparticle Diffusivities.

2021 ◽  
Vol 46 (2) ◽  
Author(s):  
O.K. Amadi ◽  
F.K. Ekuma ◽  
B. N. Uche
Keyword(s):  
Aqueous Solution ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Solution Ph ◽  
First Order ◽  
Biosorption Process ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetic Plots

This study investigates the biosorption of Ni2+, Cd2+ and Pb2+ from aqueous solution by modified Newbouldia Leavis seed pod. The modification was done by acid treating air-dried activated Newbouldia Leavis seed pod by dissolving it in excess 1.0 M Mercapto acetic acid (HSCH2COOH) solution, stirred for 30 minutes and left to stand for 24 hours at 30 oC, filtered off using WhatmanNo. 41 filter paper and were air dried. The effects of solution pH and contact time were evaluated. The results showed that maximum Cd2+ and Ni2+ adsorption of 7.9872 mg/g and 7.9809 mg/g respectively occurred at pH of 6.0 while that of Pb2+ was 8.0000 mg/g, at a pH of 4.0. The optimum time for maximum adsorption of the three heavy metal ions were 110 min. The kinetic data revealed that the sorption process could best be described by the pseudo – second order kinetic model. The R2 values for the pseudo – second order kinetic plots were unity and were higher than first order reversible model and pseudo – first order plots. Moreover, the values of qcal and qexp obtained for pseudo – second order plots were very close indicating that the biosorption process followed the pseudo-second order kinetics. However, the transport mechanism for the process involved both intra-particle and liquid film diffusion.

Kinetic Study for Biosorption of Cr (VI) from Aqueous Solution by Aspergillus niger

2014 ◽  
Vol 556-562 ◽  
pp. 286-289
Author(s):  
Li Fang Zhang ◽  
Chun Yang Jiang ◽  
Zhao Shao
Keyword(s):  
Aqueous Solution ◽  
Aspergillus Niger ◽  
Correlation Coefficients ◽  
Second Order ◽  
Order Kinetic ◽  
Solution Ph ◽  
Biosorption Capacity ◽  
Biosorption Process ◽  
Order Kinetic Model ◽  
Pseudo Second Order

In this study, Biosorption of Cr (VI) ions from aqueous solution by using biomass of Aspergillus niger was investigated. The effects of initial solution pH, biosorbent amount, contact time, initial concentration and temperature were explored. In batch experiments, the biosorption capacity of Cr (VI) decreased with increase in solution pH. The biosorption of Cr (VI) ions with pH range of 2.0-8.0 was found to be optimal at pH 2. Biosorption capacity of Cr (VI) ions decreased with increased biosorbent dosage. The bosorption capacity was increased with the increasing initial Cr (VI) concentration and temperature in studied range. The biosorption process followed the pseudo-second order kinetic model and the correlation coefficients from the pseudo-second order model were all higher than 0.9997 in all studied temperatures. These results suggest that the biomass of Aspergillus niger is a promising biosorbent for removal of Cr (VI) ions from the wastewater.

Adsorption of Chromium (VI) from Aqueous Solution by Agricultural Waste Derived Activated Carbon

2013 ◽  
Vol 726-731 ◽  
pp. 2100-2106 ◽  
Author(s):  
Hua Zhang ◽  
Xue Hong Zhang ◽  
Yi Nian Zhu ◽  
Shou Rui Yuan
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Agricultural Waste ◽  
Order Kinetic ◽  
Chromium Vi ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Grapefruit Peel ◽  
Pseudo Second Order ◽  
C 30

Activated carbon prepared from grapefruit peel, an agricultural solid waste by-product, has been used for the adsorption of Cr(VI) from aqueous solution. The effects of adsorbent dosage, pH and temperature on adsorption of Cr(VI) were investigated. The maximum adsorption yield was obtained at the initial pH of 3. The dynamical data fit very well with the pseudo-second-order kinetic model and the calculated adsorption capacities (23.98, 24.33 and 24.81 mg/g) were in good agreement with experiment results at 20°C, 30°C and 40 °C for the 100 mg/L Cr(VI) solution. The Freundlich model (R2 values were 0.9198-0.9871) fitted adsorption data better than the Langmuir model. The calculated parameters confirmed the favorable adsorption of Cr(VI) on the activated carbon prepared from grapefruit peel.

Biosorption of hexavalent chromium from aqueous solution by polyethyleneimine-modified ultrasonic-assisted acid hydrochar from Sargassum horneri

2020 ◽  
Vol 81 (6) ◽  
pp. 1114-1129 ◽  
Author(s):  
Jun Wang ◽  
Qinglong Xie ◽  
Ao Li ◽  
Xuejun Liu ◽  
Fengwen Yu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Crosslinking Reaction ◽  
Order Kinetic ◽  
Adsorption Capacities ◽  
Initial Ph ◽  
Ultrasonic Assisted ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract In this study, an efficient route to synthesizing polyethyleneimine-modified ultrasonic-assisted acid hydrochar (PEI-USAH) is developed and reported. Ultrasonic irradiation technique was used as surface modification method to shorten the crosslinking reaction for hydrochar and polyethyleneimine (PEI). The PEI-USAH showed an excellent adsorption capacity for Cr(VI) from aqueous solution. The physicochemical properties of this PEI-modified adsorbent were comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller analysis and CNHS analysis. The effects of contact time, initial pH, and biosorbent dose on adsorption capacities were investigated. The batch adsorption experiments showed that PEI-USAH possessed the maximum adsorption capacities of 94.38 mg/g and 330.84 mg/g for initial Cr(VI) concentration of 100 mg/L and 500 mg/L, respectively. Furthermore, this adsorption process could be fitted to Langmuir adsorption and described by the pseudo second order kinetic model. Based on the above findings, PEI-USAH could be used as a potential adsorbent for removal of Cr(VI) from wastewater.

scholarly journals Removal of Malachite Green from Aqueous Solution by Activated Carbon Developed from Cocoa (Theobroma Cacao) Shell - A Kinetic and Equilibrium Studies

2011 ◽  
Vol 8 (s1) ◽  
pp. S363-S371 ◽  
Author(s):  
C. Theivarasu ◽  
S. Mylsamy
Keyword(s):  
Experimental Data ◽  
Activated Carbon ◽  
Malachite Green ◽  
Kinetic Models ◽  
Theobroma Cacao ◽  
Second Order ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Initial Ph ◽  
Pseudo Second Order

The removal of malachite green (MG) by cocoa (Theobroma cacao) shell activated carbon (CSAC) was investigated in present study. Adsorption studies were performed by batch experiments as a function of process parameters such as initial pH, contact time, initial concentration and adsorbent dose. A comparison of kinetic models applied to the adsorption of MG on CSAC was evaluated for the pseudo-first order and pseudo-second order kinetic models. Results showed that the pseudo-second order kinetic model was found to correlate the experimental data well. The experimental equilibrium adsorption data was represented with Langmuir, Freundlich, Tempkin, Dubinin-Radushkevich and Flory-Huggins isotherms. The experimental data obtained in the present study indicated that activated carbon developed from cocoa shell can be attractive options for dye removal from waste water.

scholarly journals Phragmites karkaas a Biosorbent for the Removal of Mercury Metal Ions from Aqueous Solution: Effect of Modification

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Muhammad Hamid Raza ◽  
Aqsa Sadiq ◽  
Umar Farooq ◽  
Makshoof Athar ◽  
Tajamal Hussain ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Freundlich Isotherm ◽  
Agitation Speed ◽  
Second Order ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Phragmites Karka

Batch scale studies for the adsorption potential of novel biosorbentPhragmites karka(Trin), in its natural and treated forms, were performed for removal of mercury ions from aqueous solution. The study was carried out at different parameters to obtain optimum conditions of pH, biosorbent dose, agitation speed, time of contact, temperature, and initial metal ion concentration. To analyze the suitability of the process and maximum amount of metal uptake, Dubinin-Radushkevich (D-R) model, Freundlich isotherm, and Langmuir isotherm were applied. The values ofqmaxfor natural and treated biosorbents were found at 1.79 and 2.27 mg/g, respectively. The optimum values of contact time and agitation speed were found at 50 min and 150 rpm for natural biosorbent whereas 40 min and 100 rpm for treated biosorbent, respectively. The optimum biosorption capacities were observed at pH 4 and temperature 313 K for both naturalP. karkaand treatedP. karka.RLvalues indicate that comparatively treatedP. karkawas more feasible for mercury adsorption compared to naturalP. karka. Both pseudo-first-order and pseudo-second-order kinetic models were applied and it was found that data fit best to the pseudo-second-order kinetic model. Thermodynamic studies indicate that adsorption process was spontaneous, feasible, and endothermic.

Kinetic Studies of Adsorption of Disperse Blue 2BLN from Aqueous Solution by Expanded Graphite

2011 ◽  
Vol 148-149 ◽  
pp. 357-360
Author(s):  
Jin Bo Huang ◽  
Min Cong Zhu ◽  
Zhi Fang Zhou ◽  
Hong Xia Zhang
Keyword(s):  
Aqueous Solution ◽  
Room Temperature ◽  
Ph Value ◽  
Expanded Graphite ◽  
Kinetic Studies ◽  
Second Order ◽  
Batch Adsorption ◽  
Initial Ph ◽  
Intra Particle Diffusion ◽  
Pseudo Second Order

Expanded graphite (EG) was prepared by microwave irradiation and evaluated as adsorbent for the removal of disperse blue 2BLN (DB) from aqueous solution by the batch adsorption technique under different conditions of initial pH value, adsorbent dosage, initial dye concentration and contact time. The experimental data were analyzed considering pseudo-first-order, pseudo-second-order and intra-particle diffusion approaches. The adsorption kinetics at room temperature could be expressed by the pseudo second order model very well. The results indicate that the adsorption rate is fast enough and more than eighty percent of the adsorbed DB can be removed in the first 15 min at room temperature, which makes the process practical for industrial application.

scholarly journals KINETIC AND ISOTHERM STUDY OF CUPPER ADSORPTION FROM AQUEOUS SOLUTION USING WASTE EGGSHELL

2014 ◽  
Vol 22 (2) ◽  
pp. 132-140 ◽  
Author(s):  
Ayben Polat ◽  
Sukru Aslan
Keyword(s):  
Ph Value ◽  
Experimental System ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Isotherm Study ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The sorption of Cu2+ ions from aqueous solutions by eggshell was investigated in a batch experimental system with respect to the temperature, initial Cu2+ concentrations, pH, and biosorbent doses. The adsorption equilibrium was well described by the Langmuir isotherm model with the maximum adsorption capacity of 5.05 mg Cu2+/g eggshell at 25 °C. The value of qe increased with increasing the temperature while also increases the release of Ca2+ and HCO−3 ions from the eggshell. The highest sorption of Cu onto the waste eggshell was determined at the initial pH value of 4.0. The results confirming that the adsorption reaction of Cu2+ on the eggshell was thought to be endothermic. A comparison of the kinetic models such as pseudo first and second-order kinetics, intraparticle diffusion, and Elovich on the sorption rate demonstrated that the system was best described by the pseudo second-order kinetic model.

scholarly journals Comparative Study of Ni-Zn LHS and Mg-Al LDH Adsorbents of Navy Blue and Yellow F3G Dye

2018 ◽  
Vol 16 (1) ◽  
pp. 36 ◽  
Author(s):  
Idha Yulia Ikhsani ◽  
Sri Juari Santosa ◽  
Bambang Rusdiarso
Keyword(s):  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Isotherm Models ◽  
Disperse Dyes ◽  
Order Kinetic ◽  
Initial Ph ◽  
Isotherm Adsorption ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Adsorption of disperse dyes from wastewater onto Ni-Zn LHS (layered hydroxide salts) and Mg-Al LDH (layered double hydroxides) has been compared in this study. Effects of initial pH solution, contact time and initial dye concentration were investigated. The ability of the adsorbent to be reused was also studied. The results showed that acidic condition was favorable for the adsorption of each dyes onto both adsorbent. The adsorption kinetics was studied using pseudo-first-order, pseudo-second-order and Santosa’s kinetics models. The experimental data fits well with the pseudo-second order kinetic model. The equilibrium adsorption data were analyzed using Langmuir and Freundlich isotherm models. The results showed that adsorption of navy blue onto both adsorbent followed Freundlich isotherm adsorption, while yellow F3G followed Langmuir isotherm adsorption. In the application for the adsorption the wastewater containing dyes, Ni-Zn LHS has a better adsorption capacity of 52.33 mg/g than that of Mg-Al LDH that 30.54 mg/g. Calcination of the adsorbent which has already been used increased the adsorption capacity of Mg-Al LDH to 84.75 mg/g, but decreased the adsorption capacity of the Ni-Zn LHS to 42.65 mg/g.

Sign in / Sign up

Export Citation Format

Share Document