Preparation, Characterization, and In Vitro Evaluation of EGCG-Loaded Chitosan Nanoparticles

2011 ◽  
Vol 282-283 ◽  
pp. 539-544 ◽  
Author(s):  
Jia Lei Li ◽  
Yuan Gang Zu ◽  
Xiu Hua Zhao ◽  
Zhi Gang An ◽  
Xiao Yu Sui ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Delivery Systems ◽  
Room Temperature ◽  
Active Component ◽  
Sodium Tripolyphosphate ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Release Drug

Epigallocatechin-3-gallate (EGCG), a principal polyphenolic, which is most abundant and active component in tea. It is considered key to these healthful qualities. However, EGCG used in clinical application which is still shortcomings of short half-life and low bioavailability. Chitosan (CS) has been widely used in pharmaceutical and medical areas, particularly for its potential in the development of controlled release drug delivery systems due to its well properties. In this study, we prepared EGCG-loaded chitosan nanoparticles by ionic polymeric method using sodium tripolyphosphate(TPP) as ionic polymeric agent successfully. Results controlled conditions (concentration of CS, 2 mg/mL; pH = 5.4; volume of TPP(0.5 mg/mL), 6.6 mL; amount of EGCG, 15 mg; ionic polymeric time, 24 h at room temperature (0.5 mL/min))volume of TPP(0.5 mg/mL), 6.6 mL; amount of EGCG, 15 mg; ionic polymeric time, 24 h at room temperature (0.5 mL/min)) for entrapment efficiency, loading efficiency, mean particle size and Zeta potential, were found to be 62.3 %, 33.8 %, 141.5 ± 0.4 nm and -31.21 ± 0.54 mV, respectively, and CS-EGCG-NPS have well property of sustained release.

scholarly journals DEVELOPMENT, CHARACTERIZATION AND IN VITRO RELEASE KINETIC STUDIES OF IBANDRONATE LOADED CHITOSAN NANOPARTICLES FOR EFFECTIVE MANAGEMENT OF OSTEOPOROSIS

2021 ◽  
pp. 120-125
Author(s):  
S. PATHAK ◽  
S. P. VYAS ◽  
A. PANDEY
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Sodium Tripolyphosphate ◽  
Release Kinetics ◽  
Ph Effect ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Release Kinetic

Objective: The objective of the present study was to develop, optimize, and evaluate Ibandronate-sodium loaded chitosan nanoparticles (Ib-CS NPs) to treat osteoporosis. Methods: NPs were prepared by the Ionic gelation method and optimized for various parameters such as the effect of concentration of chitosan, sodium tripolyphosphate (TPP), and pH effect on particle size polydispersity index (PDI), zeta potential, and entrapment efficiency. The prepared nanoparticles were characterized using particle size analyzer (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-Transform Infrared spectroscopy (FTIR).  Results: Formulated NPs were obtained in the average nano size in the range below 200 nm in TEM, SEM, and DLS studies. The particle size and encapsulation efficiency of the optimized formulation were 176.1 nm and 63.28%, respectively. The release profile of NPs was depended on the dissolution medium and followed the First-order release kinetics. Conclusion: Bisphosphonates are the most commonly prescribed drugs for treating osteoporosis in the US and many other countries, including India. Ibandronate is a widely used anti-osteoporosis drug, exhibits a strong inhibitory effect on bone resorption performed by osteoclast cells. Our results indicated that Ibandronate sodium-loaded chitosan nanoparticles provide an effective medication for the treatment of osteoporosis.

scholarly journals Formulation and in vitro Characterization of Donepezil-loaded Chitosan Nanoparticles

2020 ◽  
pp. 10-16
Author(s):  
Muhammad Wahab Amjad ◽  
Nawaf Mohamed Alotaibi
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Zeta Potential ◽  
Encapsulation Efficiency ◽  
Sodium Tripolyphosphate ◽  
Chitosan Nanoparticles ◽  
Sonication Time ◽  
In Vitro Characterization ◽  
Constant Rate

Millions of people are affected globally by alzheimer’s disease and it is regarded as a dangerous progressive medical and socio-economic burden. The drug delivery to brain is hindered due to the presence of blood brain barrier. Nanoparticle mediated drug delivery is a promising approach in this regard. Chitosan is a hydrophilic polysaccharide polymer of N-acetylglycosamine and glucosamine. Owing to its biodegradability, nontoxicity and biocompatibility it is regarded as a safe excipient. The aim of the study was to fabricate donepezil-loaded sustained release chitosan nanoparticles as a simple way to deliver nano-drugs to the brain. The nanoparticles were fabricated using ionic gelation method using different concentrations of Sodium tripolyphosphate (TPP) and chitosan. The fabricated nanoparticles were assessed for particle size, zeta potential, encapsulation efficiency and in vitro drug release. The effect of sonication time on the particle size of nanoparticles was also studied. The nanoparticles exhibited mean particle size (between 135-1487 nm) and zeta potential (between +3.9-+38mV) depending on chitosan and TPP concentration used. The rise in the sonication time from 25 to 125 sec exhibited a decrease in particle size. The encapsulation efficiency was found to be in the range of 39.1-74.4%. Sustained and slow release of donepezil at a constant rate was exhibited from nanoparticles. The nanoparticles show potential to deliver donepezil to brain with enhanced encapsulation efficiency.

scholarly journals Chitosan Nanocarrier Entrapping Hydrophilic Drugs as Advanced Polymeric System for Dual Pharmaceutical and Cosmeceutical Application: A Comprehensive Analysis Using Box-Behnken Design

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 677
Author(s):  
Sara A. Abosabaa ◽  
Aliaa N. ElMeshad ◽  
Mona G. Arafa
Keyword(s):  
Particle Size ◽  
Sodium Tripolyphosphate ◽  
Chitosan Nanoparticles ◽  
Optimization Procedure ◽  
Entrapment Efficiency ◽  
Chitosan Solution ◽  
Polydispersity Index ◽  
Successful Implementation ◽  
Solution Ph ◽  
Box Behnken Design

The objective of the present research is to propose chitosan as a nanocarrier for caffeine—a commonly used drug in combating cellulite. Being a hydrophilic drug, caffeine suffers from insufficient topical penetration upon application on the skin. Chitosan nanoparticles loaded with caffeine were prepared via the ionic gelation technique and optimized according to a Box–Behnken design. The effect of (A) chitosan concentration, (B) chitosan solution pH, and (C) chitosan to sodium tripolyphosphate mass ratio on (Y1) entrapment efficiency percent, (Y2) particle size, (Y3) polydispersity index, and (Y4) zeta potential were studied. Subsequently, the desired constraints on responses were applied, and validation of the optimization procedure was confirmed by the parameters exhibited by the optimal formulation. A caffeine entrapment efficiency percent of 17.25 ± 1.48%, a particle size of 173.03 ± 4.32 nm, a polydispersity index of 0.278 ± 0.01, and a surface charge of 41.7 ± 3.0 mV were attained. Microscopical evaluation using transmission electron microscope revealed a typical spherical nature of the nanoparticles arranged in a network with a further confirmation of the formation of particles in the nano range. The results proved the successful implementation of the Box–Behnken design for optimization of chitosan-based nanoparticles in the field of advanced polymeric systems for pharmaceutical and cosmeceutical applications.

scholarly journals FORMULATION AND EVALUATION OF PERINDOPRIL MICROENCAPSULES BY USING DIFFERENT POLYMER

2017 ◽  
Vol 10 (2) ◽  
pp. 153
Author(s):  
Leena Jacob ◽  
Abhilash Tv ◽  
Shajan Abraham
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Release Rate ◽  
Oral Drug Delivery ◽  
Entrapment Efficiency ◽  
Water Soluble ◽  
Oral Drug ◽  
Percentage Yield ◽  
Drug Entrapment Efficiency

Objective: The study was carried out with an objective to achieve a potential sustained release oral drug delivery system of an antihypertensive drug, Perindopril which is a ACE inhibitor having half life of 2 hours. Perindopril is water soluble drug, so we can control or delay the release rate of drug by using release retarding polymers. This may also decrease the toxic side effects by preventing the high initial concentration in the blood.Method: Microcapsules were prepared by solvent evaporation technique using Eudragit L100 and Ethyl cellulose as a retarding agent to control the release rate and magnesium stearate as an inert dispersing carrier to decrease the interfacial tension between lipophilic and hydrophilic phase. Results: Prepared microcapsules were evaluated for the particle size, percentage yield, drug entrapment efficiency, flow property and in vitro drug release for 12 h. Results indicated that the percentage yield, mean particle size, drug entrapment efficiency and the micrometric properties of the microcapsules was influenced by various drug: polymer ratio. The release rate of microcapsules could be controlled as desired by adjusting the combination ratio of dispersing agents to retarding agents.Conclusion:Perindopril microcapsules can be successfully designed to develop sustained drug delivery, that reduces the dosing frequency and their by one can increase the patient compliance.

scholarly journals FORMULATION, OPTIMIZATION AND IN VITRO EVALUATION OF 5-FLUOROURACIL LOADED LIQUORICE CRUDE PROTEIN NANOPARTICLES FOR SUSTAINED DRUG DELIVERY USING BOX-BEHNKEN DESIGN

2021 ◽  
pp. 216-226
Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Crude Protein ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Box Behnken Design ◽  
Sustained Drug Delivery ◽  
Drug Loading Efficiency

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.

scholarly journals Development, Optimisation and Evaluation of Ketoprofen Lipospheres

2020 ◽  
Vol 11 (SPL4) ◽  
pp. 1853-1863
Author(s):  
Shubhra Rai ◽  
Gopal Rai ◽  
Ashish Budhrani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Research Work ◽  
Extended Period ◽  
Entrapment Efficiency ◽  
Inflammatory Activity ◽  
Scanning Calorimetry ◽  
Anti Inflammatory

Lipospheres represent a novel type of fat-based encapsulation system produced for the topical drug delivery of bioactive compounds. The goal of this research work was to develop lipospheres, including ketoprofen applied for topical skin drug delivery. Ketoprofen lipospheres were formulated by melt emulsification method using stearic acid and Phospholipon® 90G. The lipospheres were analysed in terms of particle size and morphology, entrapment efficiency, Differential scanning calorimetry, In-vitro drug release, In-vivo (Anti-inflammatory activity). Outcomes of research revealed that particle size was found to be 9.66 µm and entrapment efficiency 86.21 ± 5.79 %. In-vivo, the study of ketoprofen loaded lipospheres formulation shows a higher plain formulation concentration in plasma (5.61 mg/mL). For dermis, ketoprofen retention was 27.02 ± 5.4 mg/mL for the lipospheres formulation, in contrast to that of the plain formulation group (10.05 ± 2.8 mg/mL). The anti-inflammatory effect of liposphere drug delivery systems was assessed by the xylene induced ear oedema technique and compared with marketed products. Finally, it seems that the liposphere drug delivery system possesses superior anti-inflammatory activity as compared to the marketed product gel consistencies. Liposphere may be capable of entrapping the medicament at very high levels and controlling its release over an extended period. Liposphere furnishes a proper size for topical delivery as well as is based on non-irritating and non-toxic lipids; it’s a better option for application on damaged or inflamed skin.

scholarly journals Chitosan Nanoparticles as a Percutaneous Drug Delivery System for Hydrocortisone

2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
Haliza Katas ◽  
Zahid Hussain ◽  
Tay Chai Ling
Keyword(s):  
Particle Size ◽  
Delivery System ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Ionic Crosslinking ◽  
Low Molecular Weight Chitosan ◽  
Permeation Studies ◽  
Ft Ir ◽  
Inflammatory Drugs

Hydrocortisone (HC) has formed the mainstay for the management of atopic dermatitis. Hence, HC-loaded chitosan nanoparticles were prepared by ionic crosslinking of high, low molecular weight chitosan (HMwt, LMwt CS) and N-trimethyl chitosan (TMC) with tripolyphosphate. HC loading into CS nanoparticles was confirmed by FT-IR. The particle size of HC-loaded HMwt, LMwt, and TMC nanoparticles was increased from243±12,147±11,and124±9 nm to337±13,222±14,and195±7 nm, respectively, by increasing the pH of CS solution. Their respective zeta potential and entrapment efficiency (EE) were significantly decreased by increasing the pH of CS solution. The swelling ratios of HC loaded HMwt, LMwt, and TMC NPs were increased when the pH of incubating media (PBS) was increased. The same increasing trend was observed in particle size and EE of HC loaded as the CS concentration was increased. The HC loaded CS NPs were generally nonspherical.In-vitropermeation studies showed that HC was efficiently released from the CS NPs in QV cream while in aqueous cream CS NPs provided a sustained release for HC. Thus, it is anticipated that CS NPs are the promising delivery system for anti-inflammatory drugs.

scholarly journals Development and In-Vitro Evaluation of Budesonide Mucoadhesive Microspherefor Pulmonary Drug Delivery

2021 ◽  
Vol 11 (2-S) ◽  
pp. 76-81
Author(s):  
Jddtadmin Journal
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Chemical Interaction ◽  
Entrapment Efficiency ◽  
Pulmonary Drug Delivery ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Drug Entrapment Efficiency

Thepurpose of the study was to develop and evaluatemucoadhesive microspheres of Budesonide for pulmonary drug delivery systemhaving prolonged residence time and sustained drug release. Microspheres were prepared by emulsificationsolvent evaporation technique using HPMC, carbopol as polymers in varying ratios. The microspheres were evaluated for its percentage yield, drug entrapment efficiency, particle size and shape, in vitro mucoadhesion study and in vitro drug release studies.The FTIR studies revealed no chemical interaction between the drug molecule and polymers and found that drug was compatible with used polymer. The mucoadhesive microspheres showed particle size, drug entrapment efficiency and yield in the ranges of148 - 164 μm, 68.0 - 85.0%and67.52 - 87.25% respectively. In vitro drug release and mucoadhesion study confirms thatformulationF5 was the best formulation as it releases 81.8 % at the end of 12 hr. in controlled manner and percentage mucoadhesion of 75.2 % after 10 hr. This confirms the developed budesonidemucoadhesive microspheres are promising for pulmonary drug delivery system.   Keywords: Budesonide, Mucoadhesion, Microspheres, Drug entrapment efficiency.

scholarly journals Preparation and characterization of azathioprine microspheres for colon specific delivery

2019 ◽  
Vol 9 (2) ◽  
pp. 97-101
Author(s):  
Rinku Gonekar ◽  
Mohan Lal Kori
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Study Drug ◽  
Entrapment Efficiency ◽  
Release Profile ◽  
Intestinal Fluid ◽  
Drug Release Profile ◽  
Fecal Matter

The objective of the present study is to develop colon targeted drug delivery system using dextrin (polysaccharide) as a carrier for Azathioprine.  Microspheres containing azathioprine, dextrin and various excipients were prepared by solvent evaporation technique. The prepared microsphere were evaluated by different methods parameters like particle size,  drug entrapment efficiency, percentage yield, shape and surface morphology  and in vitro drug release study. Drug release profile was evaluated in simulated gastric, intestinal fluid and simulated colonic fluid. Best formulation was decided on the basis drug release profile in simulated gastric, intestinal fluid and simulated colonic fluid. In dextrin based microspheres, dextrin as a carrier was found to be suitable for targeting of Azathioprine for local action in the site of colon. Dextrin microspheres released 95-99% of azathioprine in simulated colonic fluid with 4% human fecal matter solution. The results of in-vitro studies of the azathioprine microspheres indicate that for colon targeting dextrin are suitable carriers to deliver the drug specifically in the colonic region. Dextrin based azathoprine microspheres showed no significance change in particle size and % residual upon storage at 5 ± 3ºC, 25 ± 2ºC/60 ± 5% RH (room temperature) and 40 ± 2ºC/75 ±5%RH humidity for three months. Keywords: azathioprine, microsphere, dextrin, colon specific drug delivery.

Sign in / Sign up

Export Citation Format

Share Document