Comparison on Extraction Yield and Quality of Coix Seed Oil

2011 ◽  
Vol 287-290 ◽  
pp. 2966-2969 ◽  
Author(s):  
Xiao Nian Xiao ◽  
Ye Guo ◽  
Xing Yi ◽  
Hua Xiong
Keyword(s):  
Seed Oil ◽  
Acid Value ◽  
Extraction Methods ◽  
Extraction Yield ◽  
Ultrasound Assisted Extraction ◽  
Aqueous Enzymatic Extraction ◽  
Yield And Quality ◽  
Assisted Extraction ◽  
Coix Seed

The effects of four types of extraction methods on the yield and the quality of coix seed oil were investigated. The extraction yields (EYs) by these methods were: 3.43% (Microwave-assisted extraction, MAE); 2.13% (Ultrasound-assisted extraction, UAE); 1.72% (Aqueous enzymatic extraction, AEE) and 1.29% (Refluxing extraction, RE) respectively. Both the peroxide number and acid value by RE are the highest, while by other methods are almost the same.

scholarly journals Effects of microwave and ultrasound on the extraction of pectin and its chemical characterisation of banana (Musa sapientum L.) peels

Food Research ◽  
2020 ◽  
Vol 4 (6) ◽  
pp. 2030-2036
Author(s):  
A. Phaiphan ◽  
S. Churat ◽  
T. Dougta ◽  
P. Wichalin ◽  
W. Khanchai ◽  
...  
Keyword(s):  
Microwave Power ◽  
Extraction Time ◽  
High Yield ◽  
Chemical Characteristics ◽  
Ultrasound Assisted Extraction ◽  
Degree Of Esterification ◽  
Yield And Quality ◽  
Assisted Extraction ◽  
High Level

Pectin is a polysaccharide that is widely used as a food additive in food industries. Banana peels that are discarded by vendors after processing bananas for food products contain a high level of pectin. The pectin can be extracted from the plant cell walls whereas the conventional method for extraction would normally take some time to get a high yield. This research was conducted to explore the effects of microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) on the extraction of pectin and its chemical characteristics found in banana peels. For MAE, the effects of microwave power and extraction time on the yield and quality of extracted pectin was studied. It was found that the pectin yield and chemical characteristics increased with the increase of microwave power and extraction time. The percentage yield ranged from 20.93% to 22.91% for microwave power of 300 W for 5-15 mins. The moisture, ash, degree of esterification, methoxyl, and galacturonic content of extracted pectin by MAE had 8.98%, 5.40%, 75.50%, 12.00%, and 57.80%, respectively. For UAE, the effects of temperature and sonication time on the pectin yield and quality of the extracted pectin were also studied. The pectin yields ranged from 1.81% to 3.49% and the moisture, ash, degree of esterification, methoxyl, and galacturonic content of extracted pectin by UAE had 8.00%, 3.39%, 88.83%, 14.50%, and 90.07%, respectively. Although the use of MAE promoted a high pectin yield it had a lower purity level when compared to UAE. Besides, the chemical characteristics of the extracted pectin by UAE is more comparable with commercial citrus pectin than the pectin extracted by MAE.

scholarly journals Ziziphus lotus (L.) Lam. plant treatment by ultrasounds and microwaves to improve antioxidants yield and quality: An overview

2021 ◽  
Vol 5 (12) ◽  
pp. 53-68
Author(s):  
Farida Berkani ◽  
Maria Luísa Serralheiro ◽  
Farid Dahmoune ◽  
Malik Mahdjoub ◽  
Nabil Kadri ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Extraction Yield ◽  
Point Of View ◽  
Microwave Assisted Extraction ◽  
Ultrasound Assisted Extraction ◽  
Microwave Assisted ◽  
Yield And Quality ◽  
Assisted Extraction ◽  
Industrialization Process ◽  
Ultrasound Assisted

The purpose of this review is to compile the literature published about different aspects of microwave-assisted extraction (MAE) use and ultrasound-assisted extraction (UAE) applied on jujube worldwide and to compare the results on the antioxidant activity obtained for each extraction method. As a result of the increased consumers demand for natural products, as well as for those of agro-food, nutraceutical, cosmetic industries, and green extraction techniques are nowadays trending to be potential alternatives that can improve antioxidant yield and its quality from an economical and environmental point of view by reducing time, energy, and solvent consumption. Ultrasounds and microwaves are widely used methods in the extraction of active principles due to their cavitation and dipolar rotation effect, respectively. These two techniques provide efficiency of extraction while minimizing the time and preserving the quality of the food matrix, overcoming the disadvantages of conventional techniques characterized by their consumption of large quantities of solvents and providing a sparse quantity of extraction. Jujube, a shrub with a high antioxidant potential, which can be affected by various extraction conditions can be the target of UAE and MAE to increase the antioxidant extraction yield. Exploiting the beneficial properties such as the antioxidant activity can lead to an industrialization process, replacing therefor synthetic antioxidants with natural compounds. These can also help in the development of new nutraceuticals and can be used, for instance, in agro-food industries as preservatives. Keywords : Microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), antioxidants, Ziziphus lotus (L.) Lam plant.

Comparison of Conventional and Ultrasound-Assisted Extraction Techniques for Extraction of Phenolic Compounds from Coconut Husk

2019 ◽  
Vol 891 ◽  
pp. 83-89
Author(s):  
Attapon Nitiwattananon ◽  
Saipin Thanachasai
Keyword(s):  
Solvent Extraction ◽  
Phenolic Compounds ◽  
Extraction Methods ◽  
Extraction Yield ◽  
Agitation Speed ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Conventional Solvent Extraction ◽  
Ultrasound Assisted ◽  
Conventional Extraction

In this study, ultrasound-assisted extraction (UAE) was compared with conventional extraction methods, including conventional solvent extraction without agitation (CSE), conventional solvent extraction with agitation at 50 rpm (CSE50) and 150 rpm (CSE150), for the extraction of phenolic compounds from coconut (Cocos nucifera L.) husk. The extraction yield, total phenolic content (TPC) and total flavonoid content (TFC) were examined. The antioxidant capacity of C. nucifera extracts was determined by using 2,2’-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) and 2,2’-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assays. Experimental results showed that UAE gave the highest extraction yield, TPC, TFC and antioxidant capacities (ABTS and DPPH), followed by CSE150, CSE50 and CSE, respectively. UAE was found to be more effective than conventional extraction methods. Conventional solvent extraction with higher agitation speed exhibited higher extraction efficiency than those with lower agitation speed and without agitation.

Comparison of Various Extraction Techniques of Medicago sativa: Yield, Antioxidant Activity, and Content of Phytochemical Constituents

2017 ◽  
Vol 100 (6) ◽  
pp. 1681-1693 ◽  
Author(s):  
Aneta Krakowska ◽  
Katarzyna Rafińska ◽  
Justyna Walczak ◽  
Tomasz Kowalkowski ◽  
Bogusław Buszewski
Keyword(s):  
Antioxidant Activity ◽  
Medicago Sativa ◽  
Food Additives ◽  
Natural Antioxidants ◽  
Extraction Methods ◽  
Extraction Yield ◽  
Ultrasound Assisted Extraction ◽  
Etoh Extract ◽  
Assisted Extraction ◽  
Cosmetic Ingredients

Abstract Medicago sativa L. (M. sativa) is a source of many valuable secondary metabolites. Extraction yield and the concentration of phenolics, flavonoids, and saponins, as well as antioxidant potential were determined in extracts from different parts of M. sativa obtained using extraction methods such as maceration, ultrasound-assisted extraction (UAE), accelerated solvent extraction (ASE), and supercritical fluid extraction (SFE). The concentrations of the listed groups of compounds were spectrophotometrically determined and confirmed by HPLC-MS. The results showed that ASE of flowers with 70% ethanol (EtOH) provided the highest yield of extraction (47.5 ± 4.0%), whereas the lowest yield was obtained in stems (4.0 ± 0.2%). The 70% EtOH extract from flowers showed the highest phenolic content [48.4 ± 4.6 mg gallic acid equivalents/g dry matter (DM)], as well as the highest antioxidant activity. The highest total flavonoid content (139.0 ± 7.1 mg rutin equivalents/g DM) was observed in the extract from leaves obtained through SFE. This extract was also especially rich in saponins [622.2 ± 30.3 mg oleanolic acid equivalents (OAE)/g DM]. However, the lowest compound content was observed in maceration extracts from stems (54.6 ± 27.0 mg OAE/g DM). The results suggest that EtOH extracts from alfalfa flowers and SFE extracts from M. satvia leaves, especially, may serve as potential sources of natural antioxidants for nutraceuticals, food additives, and cosmetic ingredients.

scholarly journals Green Extraction Methods for Extraction of Polyphenolic Compounds from Blueberry Pomace

Foods ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1521
Author(s):  
Ante Lončarić ◽  
Maria Celeiro ◽  
Antun Jozinović ◽  
Josip Jelinić ◽  
Tihomir Kovač ◽  
...  
Keyword(s):  
Liquid Chromatography ◽  
Energy Input ◽  
Extraction Methods ◽  
Extraction Yield ◽  
Polyphenolic Compounds ◽  
Array Detector ◽  
Ultrasound Assisted Extraction ◽  
Green Extraction ◽  
Assisted Extraction ◽  
Tandem Mass Spectrometric

In this study, green extraction methods—high voltage electrical discharges (HVED), pulsed electric field (PEF), and ultrasound-assisted extraction (UAE)—were compared in terms of extraction yield of total and individual polyphenolic compounds, as well as the antioxidant capacity of blueberry pomace extracts. All extractions were performed with methanol- and ethanol-based solvents. The highest total polyphenols content (TPC) (10.52 mg of gallic acid equivalent (GAE) per g of dry weight (dw)) and antioxidant activity (AA) (0.83 mmol TE/g dw) were obtained by PEF-assisted extraction in the ethanol-based solvent after 100 pulses and 20 kV/cm, which corresponds to an energy input of 41.03 kJ/kg. A total of eighteen individual polyphenols were identified in all investigated blueberry pomace extracts by high-performance liquid chromatography with the diode-array detector (HPLC-DAD) and liquid chromatography electrospray ionization tandem mass spectrometric (LC-(HESI)-MS/MS). The highest anthocyanin (1757.32 µg/g of dw) and flavanol (297.86 µg/g of dw) yields were obtained in the methanol-based solvent, while the highest phenolic acid (625.47 µg/g of dw) and flavonol (157.54 µg/g of dw) yields were obtained in the ethanol-based solvent by PEF-assisted extraction at the energy input of 41.03 kJ/kg. These results indicated that PEF is a promising green extraction method which can improve the blueberry pomace’s polyphenol extraction yield.

scholarly journals Ziziphus lotus (L.) Lam. plant treatment by ultrasounds and microwaves to improve antioxidants yield and quality: An overview

2021 ◽  
Vol 5 (12) ◽  
pp. 53-68
Author(s):  
Farida Berkani ◽  
Maria Luísa Serralheiro ◽  
Farid Dahmoune ◽  
Malik Mahdjoub ◽  
Nabil Kadri ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Extraction Yield ◽  
Point Of View ◽  
Microwave Assisted Extraction ◽  
Ultrasound Assisted Extraction ◽  
Microwave Assisted ◽  
Yield And Quality ◽  
Assisted Extraction ◽  
Industrialization Process ◽  
Ultrasound Assisted

The purpose of this review is to compile the literature published about different aspects of microwave-assisted extraction (MAE) use and ultrasound-assisted extraction (UAE) applied on jujube worldwide and to compare the results on the antioxidant activity obtained for each extraction method. As a result of the increased consumers demand for natural products, as well as for those of agro-food, nutraceutical, cosmetic industries, and green extraction techniques are nowadays trending to be potential alternatives that can improve antioxidant yield and its quality from an economical and environmental point of view by reducing time, energy, and solvent consumption. Ultrasounds and microwaves are widely used methods in the extraction of active principles due to their cavitation and dipolar rotation effect, respectively. These two techniques provide efficiency of extraction while minimizing the time and preserving the quality of the food matrix, overcoming the disadvantages of conventional techniques characterized by their consumption of large quantities of solvents and providing a sparse quantity of extraction. Jujube, a shrub with a high antioxidant potential, which can be affected by various extraction conditions can be the target of UAE and MAE to increase the antioxidant extraction yield. Exploiting the beneficial properties such as the antioxidant activity can lead to an industrialization process, replacing therefor synthetic antioxidants with natural compounds. These can also help in the development of new nutraceuticals and can be used, for instance, in agro-food industries as preservatives. Keywords : Microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), antioxidants, Ziziphus lotus (L.) Lam plant.

Pengaruh Jenis Co-Solvent terhadap Rendemen dan Mutu Biodiesel secara Transesterifikasi In Situ Menggunakan Radiasi Gelombang Mikro

2016 ◽  
Vol 10 (2) ◽  
pp. 119-126
Author(s):  
Mahlinda Mahlinda ◽  
Fitriana Djafar
Keyword(s):  
Catalyst Concentration ◽  
Maximum Yield ◽  
Acid Value ◽  
Experimental Result ◽  
In Situ Transesterification ◽  
Yield And Quality ◽  
Solvent Type ◽  
Biodiesel Quality

The main purpose of this research was to observer effect co-solvent type (n-Hexane, chloroform and without co-solvent)  toward yield and quality of biodiesel via in situ transesterification process using microwave irradiation. The process was studied at microwave power 450 watt, reaction time 4 minutes, methanol to seed ratio 25:1 and catalyst concentration 5%. The physicochemical parameters of the biodiesel produced such as viscosity, density and acid value were analysed and compared with the SNI 7182-2012 standard. The experimental result showed the maximum yield biodiesel 78,32% obtained by using co-solvent chloroform.Test result of physicochemical properties (viscosity, density and acid value) of biodiesel products using co solvent n-Hexane, chloroform and without co solvent showed that these products conform to the SNI 7182-2012 standars. The type of co-solvent only affectedon biodiesel yield dan not affected on biodiesel quality (viscosity, density and acid value).  ABSTRAKTujuan penelitian ini adalah untuk mempelajari pengaruh jenis co-solvent (n-Hexane, chloroform dan tanpa co-solvent) terhadap rendemen dan mutu biodiesel secara trasesterifikasi in situ menggunakan radiasi gelombang mikro. Proses dilakukan pada daya gelombang mikro 450 watt, waktu reaksi 4 menit, perbandingan berat metanol terhadap bahan baku 25:1 dan jumlah katalis 5%. Parameter fisiko kimia dari produk biodiesel seperti viskositas, densitas dan angka asam di analisa dan dibandingkan dengan standar SNI 7182-2012 tentang biodiesel. Hasil penelitian menunjukkan rendemen maksimum biodiesel sebesar 78,32% diperoleh dengan menggunakan co-solvent chloroform. Hasil pengujian  karakteristik fisiko kimia (viskositas, densitas dan angka asam) dari produk biodiesel menggunakan co-solvent n-Hexane, chloroform dan tanpa co-solvent menunjukkan bahwa semua parameter ini masih memenuhi standar SNI 1782-2012 tentang biodiesel. Jenis co-solvent hanya berpengaruh pada rendemen biodiesel dan tidak berpengaruh terhadap mutu biodiesel (viskositas, densitas dan bilangan asam).Kata kunci: co-solvent, in situ transesterifikasi, microwave, rendemen, mutu   

scholarly journals Mathematical Modelling of Ultrasound-Assisted Extraction Kinetics of Bioactive Compounds from Artichoke By-Products

Foods ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 931
Author(s):  
Cristina Reche ◽  
Carmen Rosselló ◽  
Mónica M. Umaña ◽  
Valeria Eim ◽  
Susana Simal
Keyword(s):  
Power Density ◽  
Bioactive Compounds ◽  
Extraction Yield ◽  
Total Phenolic ◽  
Model Parameters ◽  
Ultrasound Assisted Extraction ◽  
Yield Curves ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Ultrasound Power

Valorization of an artichoke by-product, rich in bioactive compounds, by ultrasound-assisted extraction, is proposed. The extraction yield curves of total phenolic content (TPC) and chlorogenic acid content (CAC) in 20% ethanol (v/v) with agitation (100 rpm) and ultrasound (200 and 335 W/L) were determined at 25, 40, and 60 °C. A mathematical model considering simultaneous diffusion and convection is proposed to simulate the extraction curves and to quantify both temperature and ultrasound power density effects in terms of the model parameters variation. The effective diffusion coefficient exhibited temperature dependence (72% increase for TPC from 25 °C to 60 °C), whereas the external mass transfer coefficient and the equilibrium extraction yield depended on both temperature (72% and 90% increases for TPC from 25 to 60 °C) and ultrasound power density (26 and 51% increases for TPC from 0 (agitation) to 335 W/L). The model allowed the accurate curves simulation, the average mean relative error being 5.3 ± 2.6%. Thus, the need of considering two resistances in series to satisfactorily simulate the extraction yield curves could be related to the diffusion of the bioactive compound from inside the vegetable cells toward the intercellular volume and from there, to the liquid phase.

scholarly journals Extraction of Peppermint Essential Oils and Lipophilic Compounds: Assessment of Process Kinetics and Environmental Impacts with Multiple Techniques

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2879
Author(s):  
Aleksandar Radivojac ◽  
Oskar Bera ◽  
Zoran Zeković ◽  
Nemanja Teslić ◽  
Živan Mrkonjić ◽  
...  
Keyword(s):  
Co2 Emissions ◽  
Electricity Consumption ◽  
Well Being ◽  
Extraction Methods ◽  
Ultrasound Assisted Extraction ◽  
Statistical Parameters ◽  
Microwave Assisted ◽  
Assisted Extraction ◽  
The Many ◽  
Product Sales

Consumers are becoming more mindful of their well-being. Increasing awareness of the many beneficial properties of peppermint essential oil (EO) has significantly increased product sales in recent years. Hydrodistillation (HD), a proven conventional method, and a possible alternative in the form of microwave-assisted hydrodistillation (MWHD) have been used to isolate peppermint EO. Standard Soxhlet and alternatively supercritical fluid (SFE), microwave-assisted, and ultrasound-assisted extraction separated the lipid extracts. The distillations employed various power settings, and the EO yield varied from 0.15 to 0.80%. The estimated environmental impact in terms of electricity consumption and CO2 emissions suggested that MWHD is an energy efficient way to reduce CO2 emissions. Different extraction methods and solvent properties affected the lipid extract yield, which ranged from 2.55 to 5.36%. According to the corresponding values of statistical parameters, empiric mathematical models were successfully applied to model the kinetics of MWHD and SFE processes.

Sign in / Sign up

Export Citation Format

Share Document