Theoretical Analysis and Experimental Research on Emergency Release Devices of Loading Arm

2012 ◽  
Vol 468-471 ◽  
pp. 2149-2154
Author(s):  
Jie Wang ◽  
Ye Mu Wang ◽  
Qin Guo Wang
Keyword(s):  
Theoretical Analysis ◽  
Optimum Design ◽  
Experimental Research ◽  
Mathematic Model ◽  
Test Results ◽  
Theory Analysis ◽  
Test Analysis ◽  
Structure Characteristics ◽  
Release Device ◽  
Release Devices

This paper introduces the components and structure characteristics of Loading arms Emergency Release Device(ERD). It establishes mathematic model and carried on theory analysis and test analysis of the ERD. The theory analysis is identical with test results so that it can provide the theory basis for optimum design.

An Investigation of Face Type Magnetic Couplers

1996 ◽  
Vol 210 (4) ◽  
pp. 263-272 ◽  
Author(s):  
R Waring ◽  
J Hall ◽  
K Pullen ◽  
M R Etemad
Keyword(s):  
Theoretical Analysis ◽  
Optimum Design ◽  
Experimental Test ◽  
Axial Load ◽  
Filling Factor ◽  
Theoretical Calculations ◽  
Test Results ◽  
Face Type ◽  
Design And Manufacture ◽  
Good Agreement

A theoretical analysis of magnetic couplers is recounted, leading to the design and manufacture of prototype disc type magnetic couplers. Design and development of experimental test rigs are also given. Test results are presented and compared with theoretical calculations. This shows very good agreement. The exception to the rule was the case of axial load measurements, which were not accurately evaluated by the computations. The geometries tested here showed the optimum design to consist of rotors with eight poles, magnet thickness of 10 mm and a filling factor of about 0.7.

Upgrading of Tubular Heat Exchangers by the Helical Spacer Method and Evaluation

2002 ◽  
Author(s):  
F. L. Eisinger ◽  
R. E. Sullivan
Keyword(s):  
Theoretical Analysis ◽  
Acoustic Wave ◽  
Heat Exchangers ◽  
Test Results ◽  
Vibration Testing ◽  
Safe Operation ◽  
Shell Side ◽  
Full Load ◽  
Post Modification ◽  
Side Flow

The tubular heat exchangers described exhibited a sensitivity to flow-induced tube vibration at about 50% of their design shell-side flow. Following a detailed theoretical analysis, the heat exchangers were modified by the helical spacer method providing additional tube supports in-between the existing support plates and in the U-bend. This modification aimed at allowing the heat exchangers to operate safely and reliably at full load, including a 25% overload. Post modification sound and vibration testing was performed which confirmed the adequacy of the modification. The test results showed however, that at the overload condition, an unusual acoustic wave inside the shell was developing. It was determined that this wave would not be harmful to the safe operation of the heat exchangers. The paper will discuss the findings in more detail.

Experimental Research on the Engineering Properties of Foam-Improved Red Clay Soil

2011 ◽  
Vol 261-263 ◽  
pp. 1831-1835
Author(s):  
Guo Gang Qiao ◽  
Da Jun Yuan ◽  
Bo Liu
Keyword(s):  
Experimental Research ◽  
Clay Soil ◽  
Soil Improvement ◽  
Engineering Properties ◽  
Screw Conveyor ◽  
Test Results ◽  
X Ray Diffraction ◽  
Shield Tunneling ◽  
Red Clay ◽  
Improvement Measures

Red clay soil is widely distributed in south China, the microstructure of red clay soil was studied applying scanning electron microscopy (SEM), and the X-ray diffraction analysis (XRD) test found that a large number of swelling inducing minerals, for example, montmorillonite, illite-montmorillonite or chlorite-smectite were contained in the red clay soil. Shield tunneling in this kind of stratum is prone to arising “cake” and “arch” phenomena and it prone to lead screw conveyor device unsmooth dumping, so soil improvement measures must be taken. Foam as the most advanced soil conditioner has been widely used in shield construction. Using self-developed foam agent, experimental research on foam conditioning red clay soil was carried out, test results show that foam can not only significantly reduce the soil shear strength, but also can greatly enhance the soil's compressibility and fluidity, which is significant for the smooth dumping and excavation face stability maintenance.

The Analytical and Experimental Research of In-Vessel Corium Retention in CPR1000

2010 ◽  
Author(s):  
Xing Chen ◽  
Shishun Zhang ◽  
Jiming Lin ◽  
Huiyong Zhang
Keyword(s):  
Experimental Research ◽  
Success Probability ◽  
Outer Wall ◽  
Test Results ◽  
Pressurized Water Reactor ◽  
Structural Failure ◽  
Pressurized Water ◽  
Thermal Failure ◽  
Near Future ◽  
Preliminary Phase

The analytical and experiment research of In-Vessel Corium Retention (IVR) in the Chinese Pressurized-water Reactor 1000 MWe (CPR1000) are introduced. The IVR research consists of preliminary phase and detailed phase. The analysis of thermal failure, structural failure and penetration failure of Reactor Pressure Vessel (RPV) and the experimental research of External Reactor Vessel Cooling (ERVC) are performed at preliminary phase. Analysis results show that the RPV failure is the dominated by thermal failure mode and the probability of the thermal failure is very low. Test results show that the IVR success probability for CPR1000 is about 99% if the Critical Heat Flux (CHF) of CPR1000 is the same as that of AP600. Further works, including the ERVC enhancement design, the CHF test of the RPV outer wall and the recalculation of the IVR success probability for CPR1000, will be performed at detailed phase in the near future.

Theoretical Calculation and Experimental Research on Sequential Turbocharging of a Marine Diesel Engine

2011 ◽  
Vol 305 ◽  
pp. 416-422
Author(s):  
Peng Qi Zhang ◽  
Qing Lin He ◽  
Yin Yan Wang
Keyword(s):  
Diesel Engine ◽  
Theoretical Calculation ◽  
Experimental Research ◽  
Marine Diesel Engine ◽  
Test Results ◽  
Low Load ◽  
Marine Diesel ◽  
Working Principle ◽  
Test Result

The paper introduces the working principle of the sequential turbo-charging (STC) system of multi-turbocharger. To improve low-load performance and operating economy of the 234V12 diesel engine, a STC system of multi-turbocharger for the diesel engine was designed. Theoretical calculation and experimental research was done on this improved marine diesel engine. Then, a 3-phase STC system is presented by analyzing and comparing the test result and the switching boundary of this system is confirmed. The test results show that the low-load performance is improved obviously by use of multi-turbocharger STC system.

scholarly journals Preliminary Study on the Clinical and Genetic Characteristics of Hereditary Spherocytosis in 15 Chinese Children

2021 ◽  
Vol 12 ◽  
Author(s):  
Chongjun Wu ◽  
Ting Xiong ◽  
Zhongjin Xu ◽  
Chunlei Zhan ◽  
Feng Chen ◽  
...  
Keyword(s):  
Blood Cell ◽  
Red Blood Cell ◽  
Clinical Characteristics ◽  
Hemoglobin Concentration ◽  
Chinese Children ◽  
Test Results ◽  
Test Analysis ◽  
Genetic Characteristics ◽  
Significant Difference ◽  
Gene Test

ObjectiveTo investigate the clinical and genetic characteristics of hereditary spherocythemia (HS) in Chinese children, and to analyze the potential genotypic/phenotypic associations.MethodsThe clinical data and gene test results of children with HS were collected. All patients were diagnosed by gene test results, and the laboratory results were obtained before splenectomy. The data of red blood cell (RBC), hemoglobin (HB), mean red blood cell volume (MCV), mean red blood cell hemoglobin (MCH), mean red blood cell hemoglobin concentration (MCHC), and hematocrit (HCT) were statistically analyzed according to different mutation genes. Statistical methods for comparison between groups Mann–Whitney test analysis, two-terminal p < 0.05 was considered significant difference.ResultsA total of 15 children were enrolled in our hospital, and 14 variants were found (nine variants have not been reported before), including 10 ANK1 mutations (seven ANK1 truncated mutations) and five SPTB mutations. Patients with ANK1 mutations had more severe anemia than those with SPTB mutations (significantly lower RBC, HB, MCHC, and HCT).ConclusionThis is one of the few studies on the genetic and clinical characteristics of children with HS in China. This study identified the unique genetic and clinical characteristics of Chinese children with HS and analyzed the pathogenic genotype–phenotypic association. The results confirmed that the anemia degree of HS patients caused by ANK1 was more serious than that of patients with SPTB deficiency. However, further study of the correlation between genotype and phenotype requires a larger sample size.

scholarly journals Effect of Gadung Tuber Extract (Dioscorea hispida) on Mortality of Caterpillars (Spodoptera exigua) in Shallots (Allium cepa) in East Lombok

2021 ◽  
Vol 20 (3) ◽  
pp. 556
Author(s):  
Muhammad Mustarsidin ◽  
Syachruddin AR ◽  
Ahmad Raksun
Keyword(s):  
Allium Cepa ◽  
Analysis Of Variance ◽  
Experimental Research ◽  
Spodoptera Exigua ◽  
Test Results ◽  
Significance Level ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Tuber Extract ◽  
Range Test

Plants that can be used as pesticides are Gadung tubers. Gadung tubers contain cyanide acid to kill armyworm pests because they contain dioscorin toxins which can cause nervous disorders. The purpose of this study was to determine the effect of Gadung tuber extract (Dioscorea hispida) on Caterpillar mortality (Spodoptera exigua) in Shallot plants. This type of research is experimental research. This study used a completely randomized design (CRD). The sample used was 5 caterpillars (Spodoptera exigua) in each polybag with 5 repetitions for each concentration of Gadung tuber extract, namely 0%, 0.5%, 1.0%, 1.5%, 2.0% and 2.5%, so the total Caterpillar used was 150 Caterpillars. Gadung tuber extraction was carried out by maceration method with methanol solvent. Data were analyzed using a one-way analysis of variance at the 95% significance level, followed by DMRT (Duncans Multiple Range Test). The results showed that the Gadung tuber extract had a significant effect on the mortality of caterpillars (Spodoptera exigua) because the F count was greater than the F table (45.40>2.62), and the DMRT test results showed that the optimal concentration of Gadung tuber extract was 2.5%. Therefore, it can be concluded that the extract of Gadung tuber (Dioscorea hispida) affects the mortality of Caterpillars (Spodoptera exigua) in Shallots (Allium cepa).

scholarly journals Test Analysis Of The Development Conversion And Recognition Prior Learning Models On Vocational Teachers’ Education

2019 ◽  
Vol 8 (5C) ◽  
pp. 1456-1460
Keyword(s):  
Vocational Teachers ◽  
Test Results ◽  
Security Testing ◽  
Prior Learning ◽  
Test Analysis ◽  
Sql Injection ◽  
Internet Explorer ◽  
Recognition Of Prior Learning ◽  
Security Information ◽  
Mozilla Firefox

This study aims to: (1) develop a conversion and recognition of prior learning (RPL) model on the vocational teachers’ education in the field of automotive engineering: (2) determine the software quality developed by the functional suitability, efficiency of performance, compatibility, usability, reliability aspects, maintainability, portability, and security testing based on ISO 25010. The method applied in this Research and Development (R & D) is the Brogg and Gall. The results of the study revealed that: (1) the conversion and prior learning recognition (RPL) models on vocational teachers’ education were in accordance with the requirements of the field (2) Test results on the functional suitability scored 10.5 and a mean of 3.45; the efficiency of performance had a score of 9.5 and a mean of 3.15; compatibility scored 8 with a mean of 4; the usability had a score of 19.5 and mean of 3.2; while the reliability aspect had a score of 13.5 and a mean score of 3,37. Furthermore, the conversion and prior learning recognition models are flexible in use and competent. Regarding the portability aspect, it is compatible with Mozilla Firefox, Google Chrome, and Internet Explorer browsers. It is free from XSS and SQL injection vulnerabilities seen from the security information system.

Sign in / Sign up

Export Citation Format

Share Document