Decomposing the Influencing Factors of China’s Industrial Wastewater Discharges Using LMDI I Method

2012 ◽  
Vol 518-523 ◽  
pp. 2089-2098 ◽  
Author(s):  
Hong Jun Lei ◽  
Chang Jia Li ◽  
Xun Feng Xia ◽  
Bei Dou Xi
Keyword(s):  
Industrial Wastewater ◽  
Driving Forces ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Structural Effect ◽  
Environmental Indicators ◽  
Cleaner Production ◽  
Total Contribution ◽  
Intensity Effect ◽  
Production Effect

China’s industry accounts for 46.8% of the national gross domestic product (GDP) and plays an important strategic role to its economic growth, but it is also the main water pollution sources. In order to identify the relationship between the underlying driving forces and various environmental indicators, two critical industrial wastewater pollutant discharges over 2001-2009, including Chemical Oxygen Demand (COD) and ammonia nitrogen (NH4-N), were decomposed into three factors, i.e., production effect (caused by change in the scale of economic activity), structural effect (caused by change in economic structure) and intensity effect (caused by change in technological level of the sector), using a logarithmic mean Divisia index I (LMDI I) decomposition method. Results showed that: (1) the average annual effect changes of industrial wastewater changes of COD discharges in China is -2.99% with the production effect, structural effect, and intensity effect as 14.64%, -1.39%, and -16.24%, respectively. Similarly, the average effect changes of industrial wastewater changes of NH4-N discharges is -4.03% with production effect, structural effect, and intensity effect as 16.18%, -2.88%, and -17.33%, respectively. (2) production effect was the major factor responsible for the rise of COD and NH4-N discharges, accounting for 45% and 44% of the total contribution. (3) structural effect contributed to the decrease of COD and NH4-N discharges with a small effect of 4% and 8% in total contribution. (4) intensity effect had an dominant decremental effect in COD and NH4-N discharges, accounting for 50% and 48% of the total contribution; intensity effect could be further decomposed in cleaner production effect and pollution abatement effect, and cleaner production effect of COD and NH4-N accounts for 60% and 55% in pollution reduction. (5) the main contributors to incremental COD and NH4-N discharges among industrial sub-sectors were manufacture of paper and paper products, processing of food from agricultural products, manufacture of textile and so on. These sectors should be the top priorities for policy makers to reduce pollutants discharges, and the potential measures are industrial restructuring and related regulation.

Decomposition Analyses for COD Discharges in China’s Industrial Sub-Sectors: Which is the Superior Method?

2012 ◽  
Vol 518-523 ◽  
pp. 168-177 ◽  
Author(s):  
Xun Feng Xia ◽  
Hong Jun Lei ◽  
Chang Jia Li ◽  
Bei Dou Xi
Keyword(s):  
Industrial Wastewater ◽  
Decomposition Analysis ◽  
Oxygen Demand ◽  
Structural Effect ◽  
Ease Of Use ◽  
Data Set ◽  
Total Contribution ◽  
Intensity Effect ◽  
Production Effect ◽  
Wide Range

Numerous index decomposition analysis approaches have been reported in the past 30 years. However, the selection of different methods appears to be arbitrary, and little consensus has been reached on which is the superior method. Between 2001 and 2009, 10 different methods have been used to identify the factors (i.e. production effect, structural effect and intensity effect) influencing on China’s industrial wastewater pollutant (Chemical Oxygen Demand, COD) discharges. From the aspect of theoretical foundation, adaptability, ease of use, and ease of result interpretation, these methods are compared. Results show that: (1) LMDI 1 is a superior approach because of zero residual error in decomposition, no zero values problem in data set, simplicity in formula, and wide range in usage situations. (2) the average effect changes of industrial wastewater changes of COD discharges in China is 14.89 ×104 t with production effect, structural effect, and intensity effect were 72.97×104 t, -6.93×104 t and -80.94×104 t, respectively. (3) production effect was the major factor responsible for the rise of COD discharges, accounting for 45% of the total contribution. (4) structural effect contributed to the decrease of COD discharges with a small effect of 4% in total contribution. (5) intensity effect had an dominant decremental effect in COD discharges.

scholarly journals Experimental Study on a Closed-Cycle Humidification and Dehumidification System for Treating Wastewater Containing High Concentrations of Inorganic Salts and Organic Matter

Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 671
Author(s):  
Jun Liu ◽  
Yong Sun ◽  
Sanjiang Yv ◽  
Jiaquan Wang ◽  
Kaixuan Hu
Keyword(s):  
Organic Matter ◽  
Industrial Wastewater ◽  
Removal Rate ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Filter Press ◽  
Inorganic Salts ◽  
Closed Cycle ◽  
Treatment Performance ◽  
High Concentrations

Industrial wastewater contains high concentrations of inorganic salts and organic matter. This experiment studied a system for treating wastewater containing high concentrations of inorganic salts and organic matter. The setup consists of a closed-cycle humidification and dehumidification system and a filter press. Chemical wastewater was used as the treatment solution, and the treatment performance of the system was tested and analyzed. The system effectively reduced the chemical oxygen demand (COD), electric conductivity (EC), total nitrogen (TN), and ammonia nitrogen (NH4-N) in the wastewater and, at the same time, dehydrated sludge was obtained through a filter press. The system maintains a stable removal rate of each index (COD, EC, TN, and NH4-N) in wastewater and can remove inorganic salts and organic matter from wastewater. The system can successfully treat industrial wastewater containing high concentrations of inorganic salts and organic matter.

scholarly journals Preparation of Cathode-Anode Integrated Ceramic Filler and Application in a Coupled ME-EGSB-SBR System for Chlortetracycline Industrial Wastewater Systematic Treatment

2016 ◽  
Vol 2016 ◽  
pp. 1-11
Author(s):  
Yuanfeng Qi ◽  
Suqing Wu ◽  
Fei Xi ◽  
Shengbing He ◽  
Chunzhen Fan ◽  
...  
Keyword(s):  
New Media ◽  
Industrial Wastewater ◽  
Batch Reactor ◽  
Oxygen Demand ◽  
Granular Sludge ◽  
Ammonia Nitrogen ◽  
Ceramic Filler ◽  
Systematic Treatment ◽  
Efficient System ◽  
N Removal

Chlortetracycline (CTC) contamination of aquatic systems has seriously threatened the environmental and human health throughout the world. Conventional biological treatments could not effectively treat the CTC industrial wastewater and few studies have been focused on the wastewater systematic treatment. Firstly, 40.0 wt% of clay, 30.0 wt% of dewatered sewage sludge (DSS), and 30.0 wt% of scrap iron (SI) were added to sinter the new media (cathode-anode integrated ceramic filler, CAICF). Subsequently, the nontoxic CAICF with rough surface and porous interior packed into ME reactor, severing as a pretreatment step, was effective in removing CTC residue and improving the wastewater biodegradability. Secondly, expanded granular sludge bed (EGSB) and sequencing batch reactor (SBR), serving as the secondary biological treatment, were mainly focusing on chemical oxygen demand (COD) and ammonia nitrogen (NH3-N) removal. The coupled ME-EGSB-SBR system removed about 98.0% of CODcr and 95.0% of NH3-N and the final effluent met the national discharged standard (C standard of CJ 343-2010, China). Therefore, the CTC industrial wastewater could be effectively treated by the coupled ME-EGSB-SBR system, which has significant implications for a cost-efficient system in CTC industrial systematic treatment and solid wastes (DSS and SI) treatment.

REMOVAL OF DYE AND CHEMICAL OXYGEN DEMAND (COD) REDUCTION FROM TEXTILE INDUSTRIAL WASTEWATER USING HYBRID BIOREACTORS

2014 ◽  
Vol 13 (1) ◽  
pp. 43-50 ◽  
Author(s):  
Ghasem Najafpour Darzi ◽  
Reza Katal ◽  
Hossein Zare ◽  
Seyed Omid Rastegar ◽  
Poorya Mavaddat
Keyword(s):  
Chemical Oxygen Demand ◽  
Industrial Wastewater ◽  
Oxygen Demand ◽  
Cod Reduction

scholarly journals Spatiotemporal Effects and Driving Factors of Water Pollutants Discharge in Beijing–Tianjin–Hebei Region

Water ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1174
Author(s):  
Qilong Ren ◽  
Hui Li
Keyword(s):  
Economic Development ◽  
Industrial Structure ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Pollutant Emissions ◽  
Spatial Correlations ◽  
Time Data ◽  
Spatiotemporal Evolution ◽  
Water Pollutants ◽  
Pollutant Discharge

The problem of water pollution is a social issue in China requiring immediate and urgent solutions. In the Beijing–Tianjin–Hebei region, the contradiction between preserving the ecological environment and facilitating sustainable economic development is particularly acute. This study analyzed the spatiotemporal evolution of water pollutants and their factors of influence using statistics on the discharge of two water pollutants, namely chemical oxygen demand (COD) and NH3-N (ammonia nitrogen), in 154 counties in both 2012 and 2016 as research units in the region. The study employed Exploratory Spatial-Time Data Analysis (ESTDA), Standard Deviational Ellipse (SDE), and the Geographically Weighted Regression (GWR) models, as well as ArcGIS and GeoDa software, obtaining the following conclusions: (1) From 2012 to 2016, pollutant discharge dropped significantly, with COD and NH3-N emissions decreasing 65.9% and 47.2%, respectively; the pollutant emissions possessed the spatial feature of gradual gradient descent from the central districts to the periphery. (2) The water pollutants discharge displayed significant and positive spatial correlations. The spatiotemporal cohesion of the spatiotemporal evolution of the pollutants was higher than their spatiotemporal fluidity, representing strong spatial locking. (3) The level of economic development, the level of urbanization, and the intensity of agricultural production input significantly and positively drove pollutant discharge; the environmental regulations had a significant effect on reducing the emission of pollutants. In particular, the effect for NH3-N emissions reduction was stronger; the driving effect of the industrial structure and the distance decay was not significant.

scholarly journals A Decomposition Analysis of the Korean Manufacturing Sector: Monetary vs. Physical Outputs

2021 ◽  
Vol 13 (11) ◽  
pp. 6192
Author(s):  
Junghwan Lee ◽  
Jinsoo Kim
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Driving Forces ◽  
Manufacturing Sector ◽  
Decomposition Analysis ◽  
Primary Energy ◽  
Intensity Effect ◽  
Activity Effect ◽  
Index Decomposition ◽  
Output Indicator

This study analyzes the changes in energy consumption of the Korean manufacturing sector using the index decomposition analysis (IDA) method. To capture the production effect based on actual physical activities, we applied the activity revaluation (AR) approach in the analysis. We also developed energy consumption data in terms of primary energy supply to consider conversion loss in the energy sector to avoid any distortions in the intensity effect. The analysis covers every manufacturing subsector in Korea over the period between 2006 and 2018. Combining two distinctive approaches from the previous literature, the AR approach and primary energy-based analysis gives us helpful findings for a climate policy. First, the overall activity effect estimated from the physical output indicator is lower than that from the monetary output indicator. The monetary indicator shows that the share of energy-intensive industries decreases, whereas the physical indicator shows the opposite. Second, in terms of energy efficiency, the intensity effect is estimated as an increasing factor of energy use, whereas inversed results are shown when we use the monetary indicator. Lastly, unlike the previous studies, the AR approach results indicate that Korean manufacturing sectors have been shifting toward an energy-intensive, so it is hard to anticipate positive intensity effects, which means decreasing energy consumption factor, for a while. These results support why analyzing the driving forces of energy consumption through the AR approach and primary energy base is highly recommended.

scholarly journals Digestate Liquid Fraction Treatment with Filters Filled with Recovery Materials

Water ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 21
Author(s):  
Ilaria Piccoli ◽  
Giuseppe Virga ◽  
Carmelo Maucieri ◽  
Maurizio Borin
Keyword(s):  
Chemical Oxygen Demand ◽  
Total Nitrogen ◽  
Liquid Fraction ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Green Technology ◽  
Filling Material ◽  
Community Interactions ◽  
Material Particle ◽  
N Removal

Constructed wetlands (CWs) represent a green technology for digestate liquid fraction (DLF) treatment. However, previous research has warned about their performance when treating wastewater with high suspended solid and organic loads. In addition, the high NH4-N concentration typical of this wastewater can compromise vegetation establishment and activity. In view of this, a digestate pretreatment is needed. This study aimed to test the performance of filters filled with recovery materials, such as brick and refractory material, for DLF pretreatment. The effect on DLF physical (electrical conductivity, pH, dissolved oxygen, and temperature) and chemical (total nitrogen, ammonia–nitrogen, nitrate–nitrogen, total phosphorus, soluble phosphorus, and chemical oxygen demand) characteristics was monitored during eight weekly cycles. The effect of filtration on total nitrogen and ammonia–nitrogen removal began after about one month of loading, suggesting that an activation period is necessary for bacteria. For effective N removal, the presence of multiple digestate recirculations per day through the filters appears mandatory to guarantee the alternation of nitrification and denitrification conditions. For P removal, filling material particle size appeared to be more important than its composition. Unclear performances were observed considering chemical oxygen demand. Further studies on filling media and microbial community interactions, and the long-term efficiency of filters, are desirable.

Water-Quality Assessment of Lv-Tang River in Zhanjiang, China

2013 ◽  
Vol 295-298 ◽  
pp. 755-758 ◽  
Author(s):  
Ya Yun Liu ◽  
Zhi Hong Li ◽  
Xiao Jian Liang ◽  
Yan Peng Lin ◽  
Rong Hao Wu ◽  
...  
Keyword(s):  
Water Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Oxygen Demand ◽  
Pollution Index ◽  
Ammonia Nitrogen ◽  
Single Parameter ◽  
Water Quality Parameter ◽  
National Quality

Based on the water quality investigation data of December in 2010, the water environment quality of Lv-tang River in Zhanjiang national urban wetland park was assessed using single water quality parameter model and integrated water quality index model. The results show that the water quality of Lv-tang River is worse than the national quality standards for Grade V. The water is polluted seriously. The main pollutants are total nitrogen (TN), ammonia nitrogen (NH3-N) and chemical oxygen demand CODCr with their average concentrations of 60.49 mg/L, 30.57 mg/L and 227.38mg/L, respectively. The averages of their single parameter pollution index are 30.25 , 19.79 and 8.74. The average of single parameter pollution index of the river is 8.23 which indicated that the river belongs to heavy pollution zone. The integrated water quality index was 22.5 showing that the river belongs to serious pollution zone.

Tilapia rearing with high rate algal pond effluent: ammonia surface loading rates and stocking densities effects

2018 ◽  
Vol 78 (1) ◽  
pp. 49-56
Author(s):  
I. A. Sánchez ◽  
R. K. X. Bastos ◽  
E. A. T. Lana
Keyword(s):  
Weight Gain ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
Ammonia Nitrogen ◽  
High Rate ◽  
Surface Loading ◽  
Loading Rates ◽  
Total Weight Gain ◽  
Low Weight ◽  
Total Ammonia

Abstract In two pilot-scale experiments, fingerlings and juvenile of tilapia were reared in high rate algal pond (HRAP) effluent. The combination of three different total ammonia nitrogen (TAN) surface loading rates (SLR1 = 0.6, SLR2 = 1.2; SLR3 = 2.4 kg TAN·ha−1·d−1) and two fish stocking densities (D1 = 4 and D2 = 8 fish per tank) was evaluated during two 12-week experiments. Fingerlings total weight gain varied from 4.9 to 18.9 g, with the highest value (equivalent to 0.225 g·d−1) being recorded in SLR2-D1 treatment; however, high mortality (up to 67%) was recorded, probably due to sensitivity to ammonia and wide daily temperature variations. At lower water temperatures, juvenile tilapia showed no mortality, but very low weight gain. The fish rearing tanks worked as wastewater polishing units, adding the following approximate average removal figures on top of those achieved at the HRAP: 63% of total Kjeldahl nitrogen; 54% of ammonia nitrogen; 42% of total phosphorus; 37% of chemical oxygen demand; 1.1 log units of Escherichia coli.

Sign in / Sign up

Export Citation Format

Share Document