Adsorption of Methylene Blue from Aqueous Solution Using Honeycomb-Cinder

2012 ◽  
Vol 550-553 ◽  
pp. 2259-2262
Author(s):  
Song Bo Cui ◽  
Hua Yong Zhang ◽  
Lu Yi Zhang
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Dye Wastewater ◽  
Batch System ◽  
Adsorption Data ◽  
Adsorption Processes ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Mb Adsorption

The adsorption behavior of methylene blue (MB) dye from aqueous solutions onto honeycomb-cinder (HC) and its acid-activated product was investigated in a batch system. The results showed the adsorption capacity was decreased for raw HC samples with the increase of pH value, while it was increased for activated samples. The adsorption data were fit with Langmuir isotherm model for MB adsorption by all samples. The MB adsorption capacity on samples was increased from 2.62 mg/g to 7.81 mg/g and 7.00 mg/g after acid-activated by HCl and H2SO4, respectively. The adsorption processes of MB followed pseudo-second-order kinetics with a coefficient of correlation≥0.99. This study demonstrated that acid-activated HC has superior adsorbing ability for MB than raw HC and can be used as alternative adsorbents in dye wastewater treatment.

Nano-ZrO2/TiO2 Impregnated Orange Wood Sawdust and Peach Stone Shell Adsorbents for Cr (VI) Removal

2020 ◽  
Vol 16 (7) ◽  
pp. 880-892
Author(s):  
Şerife Parlayıcı ◽  
Kübra Tuna Sezer ◽  
Erol Pehlivan
Keyword(s):  
Contact Time ◽  
Ph Value ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Wood Sawdust ◽  
Adsorption Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Equilibrium Status

Background: In this work, Cr (VI) adsorption on nano-ZrO2๏TiO2 impregnated orange wood sawdust (Zr๏Ti/OWS) and nano-ZrO2๏TiO2 impregnated peach stone shell (Zr๏Ti/PSS) was investigated by applying different adsorption parameters such as Cr (VI) concentrations, contact time, adsorbent dose, and pH for all adsorbents. Methods: The adsorbents were characterized by SEM and FT-IR. The equilibrium status was achieved after 120 min of contact time and optimum pH value around 2 were determined for Cr (VI) adsorption. Adsorption data in the equilibrium is well-assembled by the Langmuir model during the adsorption process. Results: Langmuir isotherm model showed a maximum adsorption value of OWS: 21.65 mg/g and Zr๏Ti/OWS: 27.25 mg/g. The same isotherm displayed a maximum adsorption value of PSS: 17.64 mg/g, and Zr๏Ti/PSS: 31.15 mg/g. Pseudo-second-order kinetic models (R2=0.99) were found to be the best models for describing the Cr (VI) adsorption reactions. Conclusıon: Thermodynamic parameters such as changes in ΔG°, ΔH°, and ΔS° have been estimated, and the process was found to be spontaneous.

Adsorption kinetics and thermodynamics of acid Bordeaux B from aqueous solution by graphene oxide/PAMAMs

2015 ◽  
Vol 72 (7) ◽  
pp. 1217-1225 ◽  
Author(s):  
Fan Zhang ◽  
Shengfu He ◽  
Chen Zhang ◽  
Zhiyuan Peng
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Maximum Adsorption Capacity ◽  
Freundlich Model ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Effects Of Media ◽  
Better Than

Graphene oxide/polyamidoamines dendrimers (GO/PAMAMs) composites were synthesized via modifying GO with 2.0 G PAMAM. The adsorption behavior of the GO/PAMAMs for acid Bordeaux B (ABB) was studied and the effects of media pH, adsorption time and initial ABB concentration on adsorption capacity of the adsorbent were investigated. The optimum pH value of the adsorption of ABB onto GO/PAMAMs was 2.5. The maximum adsorption capacity increased from 325.78 to 520.83 mg/g with the increase in temperature from 298 to 328 K. The equilibrium data followed the Langmuir isotherm model better than the Freundlich model. The kinetic study illustrated that the adsorption of ABB onto GO/PAMAMs fit the pseudo-second-order model. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

Application of MnO2 Materials to Dye Removal from Aqueous Solution by Adsorption

2013 ◽  
Vol 361-363 ◽  
pp. 760-763 ◽  
Author(s):  
Wei Fang Dong ◽  
Li Hua Zang ◽  
Hao Li
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Dye Removal ◽  
Good Alternative ◽  
Order Kinetic ◽  
Dye Wastewater ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The adsorption capacity was compared for the dye wastewater onto adsorbent MnO2. The effects of contact time and dosage of adsorbent were studied. The adsorption kinetics was analyzed. The results showed that MnO2 possessed higher adsorption capacity to Methylene blue than Methyl orange which the removal efficiency could reached 94.82%and 78.63% respectively under the conditions (the dosage1.2g/L, time 60min, initial dye concentration 50mg/L, pH7). The dynamical data fit well with the pseudo second order kinetic model. The MnO2 has higher Methylene blue adsorption capacity in short equilibrium times and are good alternative in wastewater treatment.

Study on Adsorption of Uranium in Wastewater by Clay

2012 ◽  
Vol 209-211 ◽  
pp. 2081-2085 ◽  
Author(s):  
Shi You Li ◽  
Shui Bo Xie ◽  
Cong Zhao ◽  
Jin Xiang Liu ◽  
Hui Ling ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Uranium Concentration ◽  
Ph Value ◽  
Sorption Process ◽  
Order Kinetic ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Langmuir And Freundlich Models ◽  
Adsorption Capability

The effectives of pH value, contact time，sorbent dose and different initial concentration were analyzed to study the properties of the adsorption of uranium in wastewater by clay. The results show the highest adsorption capacity was obtained around neutral pH.The amount adsorbed of uranium on clay increase rapidly with increasing initial uranium concentration, but the removal rates of uranium are declined.Clay has a good adsorption capability to uranium with 18.25mg/g of adsorption capacity. The adsorption data on clay are followed by both Langmuir and Freundlich models and the results are well described by Langmuir isotherm. The pseudo-second-order kinetic model is more appropriate for the sorption process.

Adsorption of methylene blue and methyl red dyes from aqueous solutions onto modified zeolites

2013 ◽  
Vol 67 (5) ◽  
pp. 1129-1136 ◽  
Author(s):  
Z. Ioannou ◽  
Ch. Karasavvidis ◽  
A. Dimirkou ◽  
V. Antoniadis
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Activated Charcoal ◽  
Dye Adsorption ◽  
Methyl Red ◽  
Equilibrium Isotherms ◽  
Modified Zeolite ◽  
Pseudo Second Order ◽  
Mb Adsorption

Zeolite, hematite, modified zeolite and commercial activated charcoal were examined for their ability to remove methylene blue (MB) and methyl red (MR) from their aqueous solutions. Modified zeolite and hematite were produced according to the Schwertmann and Cornell method while zeolite and commercial activated charcoal were obtained from S&B and Fluka AG companies, respectively. Adsorption experiments were conducted at three different adsorbent-to-solution ratios, namely 8, 16 and 24 g/L under environmental conditions and continuous stirring. Equilibrium isotherms of MB and MR were studied at different initial concentrations (from 5 × 10−4 to 5 × 10−3 g/L). MB adsorption kinetics were also studied. The maximum adsorption of MB and MR from their aqueous solutions was achieved at 24 g/L (adsorbent-to-dye solution ratio) after 1 h and was equal to 100% (MB) on modified zeolite and 99% (MR) on commercial activated charcoal, respectively. All the other materials achieved intermediate values of dye adsorption. From the applied kinetic models, the pseudo-second-order equation best described the adsorption of MB and MR. Consequently, modified zeolite showed the highest adsorption capacity for MB, while commercial activated charcoal showed the highest adsorption capacity of MR. The studied adsorbents can be used as filters to remove dyes from wastewaters.

Adsorption of Dye from Wastewater by Modified Sawdust

2014 ◽  
Vol 1065-1069 ◽  
pp. 3123-3126
Author(s):  
Gang Chao Zhu ◽  
Jian Xin Shou ◽  
Jia Wei Qian ◽  
Hua Zheng Xin ◽  
Mu Qing Qiu
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Ph Value ◽  
Langmuir Model ◽  
Ammonium Bromide ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Adsorption Processes ◽  
Endothermic Process ◽  
Pseudo Second Order

In this study, sawdust modified by cetyltimethyl ammonium bromide was applied to adsorb conge red in aqueous solutions. The characteristics of modified sawdust were characterized by Fourier transform infrared spectrum and scanning electron microscopy. The effect of factors, such as pH, contact time, temperature, dosage, and salt concentration, were investigated. The results revealed that the addition of modified sawdust can significantly increase the adsorption capacity of dye. The maximum adsorption capacity of dye on modified sawdust was 109 mg·g-1 at 328K. The adsorption processes were rapid within the first 30 min and reached equilibrium in about 150 min. The adsorption kinetics fitted well with pseudo-second-order model. The pH value of the solution had significant impact on the amount of adsorption. Adsorption isotherm fitted better with the Langmuir model and the adsorption was an endothermic process

scholarly journals Synthesis and Characterization of Hydroxyapatite- (HAP-) Clay Composites and Adsorption Studies on Methylene Blue for Water Treatment

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Ebenezer Annan ◽  
Grace Karikari Arkorful ◽  
David Sasu Konadu ◽  
Bernard Asimeng ◽  
David Dodoo-Arhin ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Effect Of Temperature ◽  
Precipitation Process ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Thermodynamical Modeling

Dyes used by the textile, tannery, and food industries tend to pollute water bodies and must be removed to get clean water. Hydroxyapatite (HAP) was synthesized from eggshells using the wet precipitation process. The as-synthesized HAP was characterized using Fourier Transform Infrared (FTIR) and X-ray powder diffraction (XRD). The synthesized HAP was mixed with three different clays: halloysite (HNT), kaolinite (KAO), and bentonite (BENT). The removal efficiency values of methylene blue (MB) from the data showed that HAP-BENT adsorbents had higher values, followed by HAP-HNT and then HAP-KAO adsorbents. The combined masses of 24 mg, 34.5 mg, and 33 mg (representing 20%, 15%, and 10% of HAP-BENT mass) had average adsorption capacity values of 20.7 mg/g, 17.2 mg/g, and 17.9 mg/g, respectively. For each mass percentage, the adsorption capacity values were found to decrease with adsorbent dosage. The HAP-BENT composites had removal efficiency values of 98.4, 91.9%, and 91.9%, respectively. Adsorption data for the HAP-BENT adsorbents were found to be well described by the Langmuir isotherm model and pseudo-second-order kinetic model. The effect of temperature on adsorption capacity was evaluated and thermodynamical modeling was undertaken. The thermodynamical modeling predicts that based on the value of the change in enthalpy and Gibbs free energy the process was exothermic and spontaneous. This work confirms the potential of HAP-clay composites in removing MB from water.

scholarly journals Carboxylate-functionalized sugarcane bagasse as an effective and renewable adsorbent to remove methylene blue

2018 ◽  
Vol 2017 (1) ◽  
pp. 300-309 ◽  
Author(s):  
Su-nv Wang ◽  
Ping Li ◽  
Jing-jing Gu ◽  
Hao Liang ◽  
Jin-hua Wu
Keyword(s):  
Methylene Blue ◽  
Chemical Modification ◽  
Adsorption Capacity ◽  
Sugarcane Bagasse ◽  
Electrostatic Interactions ◽  
Potential Measurement ◽  
Measurement Analysis ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Abstract This study prepared a carboxylate-functionalized sugarcane bagasse (CF-SCB) from sugarcane bagasse (SCB) via a simple and low-toxicity chemical modification to enhance its capacity for adsorbing methylene blue (MB) from aqueous solutions. The success of chemical modification was confirmed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), the pore area and porosity, and zeta potential measurement analysis. The adsorption capacity of CF-SCB was investigated at different pHs, ionic strengths, temperatures, contact times and initial dye concentrations. Equilibrium data were best described by the Langmuir isotherm model, and the maximum monolayer adsorption capacity of CF-SCB (296.74 mg g−1) was greatly improved compared with SCB (77.16 mg g−1) at 30 °C. The thermodynamic study indicated that MB adsorption onto CF-SCB was a spontaneous, endothermic and entropy increased process. Adsorption kinetics followed a pseudo-second-order mode, and the adsorption mechanism was based on electrostatic interactions. The reusability study showed that CF-SCB had reasonably good reuse potential. All the results suggested that CF-SCB has high potential to be used as an effective and renewable adsorbent for MB removal from wastewater.

Competitive Biosorption of Pb(II) and Cu(II) by Functionalised Micropogonias undulates Scales

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Ibrahim O. Tijani ◽  
Oluwaseun J. Ajala ◽  
Fisayo O. Ayandele ◽  
Omodele A. Eletta ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Low Cost ◽  
Fish Scales ◽  
Wet Impregnation ◽  
Monolayer Adsorption ◽  
Competitive Biosorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Best Fit

Background: Modified bio-based adsorbents from plant sources can be used for pollution remediation by adsorption due to their low cost and availability in large quantities. Objective: In this study, the competitive biosorption of Pb(II) and Cu(II) by Micropogonias undulates functionalised fish scales (FFS) was conducted. The functionalisation was done by wet impregnation with Fe2+. Method: The biosorbent was characterised by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS) and Branueur–Emmett–Teller (BET) analyses. Results: The major constituents in the FFS were calcium and phosphorus from the collagen and apatite on the scales. Optimum removal efficiency for both metals was >99% at 10 g/l dosage. It was observed that the Langmuir isotherm model and the pseudo second order kinetics model were the best fit for the experimental data. The monolayer adsorption capacity of FFS for Pb(II) and Cu(II) was observed to be 96.15 mg/g and 100 mg/g respectively. Conclusion: The study revealed that the competitive biosorption of heavy metals can be achieved (at a good adsorption capacity) using functionalised Micropogonias undulates fish scales.

scholarly journals Husk of Agarwood Fruit-Based Hydrogel Beads for Adsorption of Cationic and Anionic Dyes in Aqueous Solutions

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1437
Author(s):  
Chih Ming Ma ◽  
Bo-Yuan Yang ◽  
Gui-Bing Hong
Keyword(s):  
Aqueous Solutions ◽  
Selective Adsorption ◽  
Order Model ◽  
Anionic Dyes ◽  
Adsorption Selectivity ◽  
Hydrogel Beads ◽  
Batch System ◽  
Initial Ph ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Hydrogel beads based on the husk of agarwood fruit (HAF)/sodium alginate (SA), and based on the HAF/chitosan (CS) were developed for the removal of the dyes, crystal violet (CV) and reactive blue 4 (RB4), in aqueous solutions, respectively. The effects of the initial pH (2–10) of the dye solution, the adsorbent dosage (0.5–3.5 g/L), and contact time (0–540 min) were investigated in a batch system. The dynamic adsorption behavior of CV and RB4 can be represented well by the pseudo-second-order model and pseudo-first-order model, respectively. In addition, the adsorption isotherm data can be explained by the Langmuir isotherm model. Both hydrogel beads have acceptable adsorption selectivity and reusability for the study of selective adsorption and regeneration. Based on the effectiveness, selectivity, and reusability of these hydrogel beads, they can be treated as potential adsorbents for the removal of dyes in aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document