Effect of High-Pressure Solution Temperature on Corrosion Resistance of AM60 Magnesium Alloy

2012 ◽  
Vol 580 ◽  
pp. 560-563
Author(s):  
Guang Hui Chen
Keyword(s):  
High Pressure ◽  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Solution Treatment ◽  
Optical Microscope ◽  
Solution Temperature ◽  
Pressure Solution ◽  
Different Temperatures ◽  
Increasing Temperature

As-cast AM60 magnesium alloy was solid dissolved under a high-pressure of 4 Gpa at different temperatures. The microstructure of the products was observed by optical microscope and the corrosion resistance of the products was investigated. The results show that increasing temperature during solution treatment promotes the dissolution into α-Mg matrix of β-Mg17Al12 in the alloy and improves the corrosion resistance of AM60 alloy, especially for over 400 °C.

Effect of Pressure and Temperature of Solution Treatment on the Microstructure and Corrosion Resistance of AZ91D Alloy

2014 ◽  
Vol 628 ◽  
pp. 111-114
Author(s):  
Hao Sheng Lu ◽  
Peng Fei Yan
Keyword(s):  
High Pressure ◽  
Corrosion Resistance ◽  
Solution Treatment ◽  
Atmospheric Temperature ◽  
Optical Microscope ◽  
Solution Temperature ◽  
Az91d Alloy ◽  
Obvious Effect ◽  
Az91d Magnesium Alloy ◽  
Different Temperatures

As-cast AZ91D magnesium alloy was solid dissolved at atmospheric temperature under different pressures (room pressure、2、3、4、5 and 6 Gpa) and under high-pressure (6 Gpa) at different temperatures (atmospheric temperature, 200, 400, 600, 800 and 1000 °C). The microstructures of the products were characterized by optical microscope and their corrosion resistance was investigated. The results show that increasing the solution pressure at atmospheric temperature has no obvious effect on the microstructure of AZ91D, but decreases the corrosion resistance. Increasing the solution temperature under the high-pressure can obviously improve the microstructure of the alloy, and markedly increases the corrosion resistance, especially over 400 °C.

Effect of High-Pressure Solution Temperature on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy

2012 ◽  
Vol 580 ◽  
pp. 505-508 ◽  
Author(s):  
Yu Shan Li
Keyword(s):  
Mechanical Properties ◽  
High Pressure ◽  
Magnesium Alloy ◽  
Atmospheric Temperature ◽  
Optical Microscope ◽  
Solution Temperature ◽  
Hardness Tester ◽  
Az61 Magnesium Alloy ◽  
Mg17al12 Phase ◽  
Different Temperatures

As-cast AZ61 magnesium alloy was treated by solution under a high-pressure of 3 Gpa at different temperatures, atmospheric temperature, 200, 400, 600, 800 and 1000 °C. The microstructure of the products was observed by optical microscope. The mechanical properties of the products were investigated by brinell hardness tester and tensile testing. The results show that increasing solution temperature promotes the dissolution into α-Mg matrix of β-Mg17Al12 phase of AZ61 alloy, especially for over 400 °C. With increasing solution temperature, the tensile strength and elongation percentage of AZ61 increase gradually, but the hardness decreases.

Effect of Solution Treatment on Corrosion Resistance of the Biodegradable NZ20K Alloy

2016 ◽  
Vol 849 ◽  
pp. 196-202
Author(s):  
Yang Fei ◽  
Xiao Bo Zhang ◽  
Zhi Xin Ba ◽  
Zhang Zhong Wang
Keyword(s):  
Corrosion Resistance ◽  
Electron Microscope ◽  
Corrosion Rate ◽  
Scanning Electron Microscope ◽  
Biomedical Applications ◽  
Solution Treatment ◽  
Solution Temperature ◽  
Solution Treated ◽  
Different Temperatures ◽  
Scanning Electron

In order to study the effect of solution temperature on corrosion resistance of Mg alloy for biomedical applications, microstructure and corrosion behavior of Mg-2.25Nd-0.11Zn-0.43Zr (NZ20K) alloy solution treated at different temperatures were investigated by using a scanning electron microscope (SEM) equipped with an electron dispersive spectroscope (EDS), electrochemical and mass loss tests. The results show that the grains grow and precipitations decreases with increasing the solution temperature. The corrosion rate decreases firstly and then increases with increasing solution temperature, and the best corrosion resistance of the NZ20K alloy is obtained at the temperature of 540 °C.

Microstructure of AM60 Magnesium Alloy by High-Pressure Solution and Subsequent Atmospheric-Pressure Aging Treatment

2012 ◽  
Vol 182-183 ◽  
pp. 315-318
Author(s):  
Wen Yan Duan
Keyword(s):  
High Pressure ◽  
Magnesium Alloy ◽  
Atmospheric Pressure ◽  
Fine Particles ◽  
Solution Treatment ◽  
Aging Treatment ◽  
Optical Microscope ◽  
X Ray Diffraction ◽  
Subsequent Aging ◽  
Aging Alloy

As-cast AM60 magnesium alloy was solid dissolved with exercising different pressures (atmospheric-pressure, 3, 4 and 5 Gpa) to it and subsequently aged under atmospheric pressure. The microstructure of the products was characterized by optical microscope and X-ray diffraction. The results show that, compared with exercising atmospheric-pressure during solution treatment, exercising high-pressure during this process causes that the α-Mg grains of the subsequent aging alloy are more fine and uniform, while the β-Mg17Al12 phases transform into fine particles and aggregate to form gobbets or strips. In addition, increasing the exercising pressure promotes the precipitation of the β-Mg17Al12 phases of the aging alloy.

Compressive Properties of AM60 Magnesium Alloy by High-Pressure Solution and Subsequent Atmospheric-Pressure Aging Treatment

2012 ◽  
Vol 189 ◽  
pp. 143-146 ◽  
Author(s):  
Shu Ying Wang
Keyword(s):  
High Pressure ◽  
Magnesium Alloy ◽  
Atmospheric Pressure ◽  
Fine Particles ◽  
Solution Treatment ◽  
Aging Treatment ◽  
Optical Microscope ◽  
Compressive Properties ◽  
Subsequent Aging ◽  
Aging Alloy

As-cast AM60 magnesium alloy was solid dissolved with exercising different pressures (atmospheric-pressure, 3, 4 and 5 Gpa) to it and subsequently aged for 10 h at 200 °C under atmospheric-pressure. The aging alloys were characterized by optical microscope, and their compressive properties were investigated by a Gleeble-3500 hot-stimulation machine. The results show that, compared with exercising atmospheric-pressure during solution treatment, exercising high-pressure during this process causes that the α-Mg grains of the subsequent aging alloy are more fine and uniform, while the β-Mg17Al12 phases transform into fine particles and aggregate to form gobbets or strips. With increasing the pressure gradually, the compressive strength of the aging alloy increases up to 4 Gpa and then decreases, while the maximum plastic strain decreases up to 4 Gpa and then increases.

Effect of Solution Treatment on Second Phase Dissolution for an Al-9.2Zn-2.0Mg-1.9Cu Alloy

2020 ◽  
Vol 993 ◽  
pp. 321-326
Author(s):  
Hong Wei Liu ◽  
Kai Wen ◽  
Xi Wu Li ◽  
Zhi Hui Li ◽  
Li Zhen Yan ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Solution Treatment ◽  
Optical Microscope ◽  
Solution Temperature ◽  
Second Phase ◽  
Dsc Analysis ◽  
Scanning Calorimetry ◽  
Phase Dissolution ◽  
Solution Treated ◽  
The Matrix

The second phase dissolution of Al-9.2Zn-2.0Mg-1.9Cu alloy conducted by various temperatures of 2h was researched with the help of optical microscope (OM), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), electrical conductivity and differential scanning calorimetry (DSC) analysis. The results gave rise to the second phase existence of Mg(Zn,Cu,Al)2 and Fe-containing phases in the as-extruded alloy. When the alloy solution treated with a temperature varied from 450°C to 470°C, a small quantity of Mg(Zn,Cu,Al)2 phase still existed in the alloy while its content exhibited a decrement trend with the solution temperature rose. For the alloy solution treated at a temperature of 475°C, Mg(Zn,Cu,Al)2 phase dissolved into the matrix completely while Fe-containing phase still remained. The electrical conductivity of quenched alloy decrease with the solution temperature increase and reached a minimum value at 470°C, and then rose slightly for the solution temperature of 475°C.

Corrosion Resistance by Sodium Metavanadate for AZ91D Magnesium Alloy

2014 ◽  
Vol 575 ◽  
pp. 170-174 ◽  
Author(s):  
Toha Nor Fadzilah ◽  
S. Norbahiyah ◽  
Mohd Zain Mohamad Zamzuri
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Oxide Film ◽  
Corrosion Test ◽  
Energy Dispersive Spectrometry ◽  
Optical Microscope ◽  
X Ray ◽  
Sodium Metavanadate ◽  
Az91d Magnesium Alloy ◽  
Polarization Technique

An oxide film was prepared on AZ91D magnesium alloy by anodizing in solution containing sodium metavanadate (NaVO3). The corrosion resistance of the substrate was investigated at a fixed current density 10 mA/cm2for 5 mins with different concentration of solution in the range of 0 – 1.0 g/l. The surface morphology, phase structure and corrosion resistance of oxide film were studied by optical microscope, scanning electron microscope (SEM) and energy dispersive spectrometry (EDS) and X-ray diffractometer (XRD), potentiodynamic polarization technique and corrosion test.

scholarly journals Improvement of corrosion resistance of magnesium alloy by high-temperature high-pressure cavitation treatment

2019 ◽  
Vol 2 (3) ◽  
pp. 255-260 ◽  
Author(s):  
Masataka Ijiri ◽  
Daichi Shimonishi ◽  
Syunpei Tani ◽  
Norihiro Okada ◽  
Masato Yamamoto ◽  
...  
Keyword(s):  
High Pressure ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Magnesium Alloy ◽  
High Temperature High Pressure
Sign in / Sign up

Export Citation Format

Share Document