The Design and Realize of Activation Platform on Dynamic Simulation Test Machine of Guns

2012 ◽  
Vol 588-589 ◽  
pp. 1218-1221
Author(s):  
Huan Tong ◽  
Ling Li ◽  
Guang Yang Liu
Keyword(s):  
Dynamic Simulation ◽  
Test Machine ◽  
Tube Axis ◽  
Test Results ◽  
Simulation Test ◽  
Axis Direction ◽  
Comparison Test ◽  
Test Platform ◽  
And Function ◽  
Horizontal Action

In order to test the functions and relevant conditions performance of guns in non-fighting shooting situation, the dynamic simulation test platform is researched to drive gun move along body tube axis direction and vertical and horizontal action, thereby the function of man-recoil and vertical or horizontal slip is realized. by test comparison, test results indicates that the platform structure reasonable, and function reliable, can solution gun pre-war fast "examination", and pre-repair detection and after-repair test without disintegration.

Dynamic Simulation and Test of IEC 61850-9-2 Process Bus Applications

2012 ◽  
Vol 433-440 ◽  
pp. 2699-2705 ◽  
Author(s):  
J. Mo ◽  
B. Liu ◽  
J.C Tan
Keyword(s):  
Real Time ◽  
Dynamic Simulation ◽  
Simulation Test ◽  
Iec 61850 ◽  
Actual Performance ◽  
The Real ◽  
Test Platform ◽  
Security And Reliability

IEC 61850-9-2 proposes the process bus communication for protection and automation within substations. The actual performance of process bus such as real-time, security and reliability are of concern, when transmission of sample values and trip signals over the same network. This paper presents the establishment of a dynamic simulation test platform, in order to facilitate the test of protection schemes over the process bus. An example is given to demonstrate that incorrect switch configuration, message priority tagging, and the volumes of traffic on the network may have an impact on the real time and reliability of the signals to be delivered.

Research on Dust Concentration Measurement Technique and Experiment Based on Charge Induction

2013 ◽  
Vol 333-335 ◽  
pp. 370-373 ◽  
Author(s):  
Kai Zheng ◽  
Jin Gang Wang ◽  
Jing Liu ◽  
Shuang Ka Xiong
Keyword(s):  
Dust Concentration ◽  
Test Results ◽  
Simulation Test ◽  
Induction Method ◽  
Basic Principles ◽  
Charge Induction ◽  
Alternating Electric Field ◽  
Test Platform ◽  
Maximum Measurement ◽  
Maximum Measurement Error

In order to solve the problem of monitoring dust concentration, the paper applies the charge induction method in the design of the monitoring sensor. Specifically, the dust concentration can be characterized by the induction voltage of the sensor which is located in the high-voltage alternating electric field. In particular, the paper introduces the structure of the sensor and analyses the basic principles and feasibility of the measuring equipment. Furthermore, couples of simulation test is conducted based on the test platform. According to the test results, the monitoring sensor performs well when the dust concentration is between 0.81g/m3 and 1.99g/m3, in which the maximum measurement error is only 1.8%. Undoubtedly, the method used for the dust concentration monitoring has a wide prospect in industrial application.

Model Validation Method for Simulation Experiment System of Complex Electromagnetic Environment

2013 ◽  
Vol 273 ◽  
pp. 726-730
Author(s):  
Xing Dong Huang ◽  
Gong Xun Shen ◽  
Ke Dong Wang
Keyword(s):  
Model Validation ◽  
Simulation Experiment ◽  
Simulation System ◽  
Test Results ◽  
Electromagnetic Environment ◽  
Control Effect ◽  
Simulation Test ◽  
Experiment System ◽  
Aerial Vehicle ◽  
And Function

It is a challenging task to control an unmanned aerial vehicle (UAV) in complex electromagnetic environment. The effective anti-jamming simulation is an economical and efficient method to test and verify the control effect of an UAV. This paper introduces a method to construct an anti-jamming simulation system for an UAV firstly. Then, the procedure to validate the anti-jamming performance of an UAV is proposed. In the following, the evaluation methods in signal level and function level are described in detail for the model validation. The model effectiveness is evaluated both qualitatively and quantitatively. The simulation test results agree with the flight results very well.

Pengembangan Instrumen Penilaian Kinerja pada Praktikum Struktur dan Fungsi Sel Di SMA Negeri 1 Kota Jambi

2016 ◽  
Vol 5 (2) ◽  
Author(s):  
Nugroho Budhiwaluyo ◽  
Rayandra Asyhar ◽  
Bambang Hariyadi
Keyword(s):  
Performance Assessment ◽  
Student Performance ◽  
Cell Structure ◽  
Structure And Function ◽  
Assessment Instrument ◽  
Product Performance ◽  
Development Model ◽  
Test Results ◽  
Validity And Reliability ◽  
And Function

  This research aims to produce a final product in the form of a performance-assessment instrument on Cell Structure and Function experiment. The development model is ADDIE. Based on expert's judgment, the instrument was valid and can be tested in the field. Field-test results shown that the product performs high validity and reliability value on measuring student performance on Cell Structure and Function experiment. Therefore, it is concluded that this performance-assessment instrument theoretically and practically has a good quality for measuring student performance in both process and product performance on Cell Structure and Function experiment. Keywords: Development, Performance-Assessment Instrument, Cell Structure and Function Experiment 

scholarly journals Hopkinson rod test results and constitutive description of TRIP780 steel resistance spot welding material

Open Physics ◽  
2020 ◽  
Vol 18 (1) ◽  
pp. 961-967
Author(s):  
Xiaomin Li ◽  
Jianrong Zhang
Keyword(s):  
Spot Welding ◽  
Steel Strip ◽  
Strain Curve ◽  
Test Machine ◽  
Strain Rates ◽  
Test Results ◽  
Welding Material ◽  
Static Tensile ◽  
Split Hopkinson ◽  
Brittle Fractures

Abstract A quasi-static tensile test was performed on a 1.4 mm-thick TRIP780 steel strip with welding points. An MTS810 material test machine was used in the test, and a Split Hopkinson tension bar device was used in performing impact stretch loading at different strain rates. The dynamic tensile stress–strain curve of the spot welding material with different strain rates was obtained through the finely designed Hopkinson rod test, and the strain rate dependence of a TRIP780 steel spot welding material was discussed. According to the dynamic constitutive equation of the TRIP780 steel spot welding material, the test results were numerically simulated, the constitutive description and test curves were compared, and the simulation results and test results were discussed and analyzed. The fractures of the test recovery specimen were scanned with the scanning electron microscope, and the fracture mechanism of the TRIP780 steel spot welding material was explored by observing the fractures. The surfaces of the fractures surface showed obvious cleavage river patterns, and the evolution process of microcracks was determined and used in characterizing brittle fractures in specimen spot welding sample subjected to dynamic stretch loading.

scholarly journals Experimental Study of the Space–Time Effect of a Double-Pipe Frozen Curtain Formation with Different Groundwater Velocities

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3830
Author(s):  
Shicheng Sun ◽  
Chuanxin Rong ◽  
Hua Cheng ◽  
Bin Wang ◽  
Xiaogang Jiang ◽  
...  
Keyword(s):  
Freezing Temperature ◽  
Physical Model Test ◽  
Sand Layer ◽  
Test Results ◽  
Groundwater Velocity ◽  
Test Platform ◽  
The Difference ◽  
Freezing Test ◽  
Double Pipe ◽  
Thermal Physical Properties

Groundwater velocity has significant effects on the formation of a frozen curtain during freezing. In order to study the influence of the velocity on a frozen curtain, a large physical model test platform was established for double-pipe freezing. Based on this platform, freezing tests for different velocities were carried out. Quartz sand was selected as a similar material. The freezing temperature of the saturated sand layer was found by analyzing the results of the nuclear magnetic resonance (NMR). Based on the study of the thermal physical properties of the sand layer, the freezing test results were analyzed, and the results showed that the flow led to the differential development of the temperature between the upstream and downstream sections of the freezing pipes. Moreover, the larger the velocity, the greater the difference. The flow prolonged the overlapping time of the frozen curtains. Additionally, the flow slowed down the development of the frozen curtain area and the frozen curtain thickness. The larger the flow velocity, the greater the inhibition of the flow on the development of the frozen curtain. The test results can provide more references for the design and construction of freezing engineering with flowing groundwater.

Study on Impact of Vibration Direction on Linear Vibration Screening Effect

2012 ◽  
Vol 226-228 ◽  
pp. 186-190
Author(s):  
Yue Min Zhao ◽  
Ke Wang ◽  
Liang Dong ◽  
Bo Zhang ◽  
Xu Liang Yang ◽  
...  
Keyword(s):  
Sieve Plate ◽  
Test Results ◽  
Simulation Test ◽  
Screening Process ◽  
Vibration Direction ◽  
Screening Effect ◽  
Direction Angle ◽  
Movement Characteristics ◽  
Screening Efficiency ◽  
Dip Angle

Based on Hertz-Mindlin contact model in software EDEM by discrete element method, using linear vibrating screen 360 mm×600 mm, movement characteristics of particle group on sieve plate and law of particles going through sieve plate were studied in screening process of coal in certain conditions, which were as follows: dip angle was 0 °, amplitude was 5 mm, frequency was 11 Hz. The simulation test results show that there are important influences of vibration direction on screening process. And influence law of vibration direction on screening effect was revealed finally. The paper also gained mathematical model between particle group’s screening efficiency and vibration direction angle, and mathematical models of particles easy or hard to sieve and material between average movement speeds and vibration direction angle.

Current situation and development direction of sports industry in colleges and universities based on euclidean algorithm

2021 ◽  
pp. 1-7
Author(s):  
Shunjiang Ma ◽  
Gaicheng Liu ◽  
Zhiwu Huang
Keyword(s):  
Computer Technology ◽  
Colleges And Universities ◽  
Status Quo ◽  
Euclidean Algorithm ◽  
Test Results ◽  
Sports Industry ◽  
Development Direction ◽  
The Status ◽  
Traditional Sports ◽  
And Function

With the development of sports in colleges and universities, the research on innovation reform of sports industry has been deepened. Therefore, based on the above situation, a study of the status quo and development direction of sports industry in colleges and universities based on the Euclid algorithm is proposed. In the research here, according to the traditional sports industry concept to sum up, and then according to the advantages of computer technology to deal with the relevant data. In order to realize good overlap between data, an application of Euclidean algorithm is proposed. In the test of Euclidean algorithm, the efficiency and function of the algorithm are tested comprehensively, and the test results show that the research is feasible.

The Research of IC Test Based on LTX-77 Test System

2014 ◽  
Vol 496-500 ◽  
pp. 1176-1179
Author(s):  
Li Tan ◽  
Yu Fang
Keyword(s):  
Test Object ◽  
Test System ◽  
Test Method ◽  
Test Results ◽  
Analog Ic ◽  
Test Platform ◽  
Logic Functions ◽  
Actual Test ◽  
Ic Test

LTX-77 test system is a large IC test system that is used for various kinds of analog IC, digital IC and analog digital mixed IC. It can be used to test DC parameters, AC parameters and logic functions. In the paper, the IC test platform is LTX-77 test system. IC ADC0804 was tested as the test object. The test method of IC is described in the view of actual test. The test results show that the test system is convenient and accurate, which has important practical value for IC manufacturers and users.

Sign in / Sign up

Export Citation Format

Share Document