Influence of the Microwave and Ultrasonic Synergistic Effect on Properties of Methylcellulose/Stearic Acids Films

2013 ◽  
Vol 666 ◽  
pp. 51-54
Author(s):  
Tian Zhong ◽  
Zi Xuan Lian ◽  
Zhe Wang ◽  
Yan Qing Niu ◽  
Zhong Su Ma
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Synergistic Effect ◽  
Treatment Time ◽  
Reaction System ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Vapor Permeability ◽  
Water Vapor Barrier ◽  
Elongation Percentage

The Influence of the microwave (MW) and ultrasonic (US) synergistic effect on mechanical and water vapor barrier properties of methylcellulose (MC)/stearic acids (SA) films was studied. For this purpose, the initial emulsions were prepared and treated in a MW and US combination reaction system. The water vapor permeability (WVP) of the films was determined, as well as the mechanical properties. As a result of the extending of MW and US treatment time, the WVP of MC/SA films declined significantly. And the tensile strength (TS) and elongation percentage at break (E) were also affected by the treatment greatly. When the treated time was 20 min, the highest TS and E were observed.

scholarly journals Effect of chitosan addition in starch and poly(lactic acid) sheets produced by extrusion

2015 ◽  
Vol 6 (1) ◽  
pp. 80
Author(s):  
Matheus Luz Alberti ◽  
Sílvio José De Souza ◽  
Heliberto Gonçalves ◽  
Fabio Yamashita ◽  
Marianne Ayumi Shirai
Keyword(s):  
Lactic Acid ◽  
Water Vapor ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Pilot Scale ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Water Vapor Barrier

<p>The use of blends containing biodegradable polymers like starch and poly (lactic acid) (PLA) has gained considerable attention, especially for the food packaging production. Current research has also highlighted the use of chitosan because their antimicrobial activity, biodegradability and applicability in the production of active biodegradable food packaging. The objective of this work was to produce cassava starch and PLA sheets incorporated with chitosan by flat extrusion process (calendering-extrusion), and evaluate the mechanical, water vapor barrier and microstructural properties. In order to simplify the obtainment of the material reducing processing steps, all components of the blend were homogenized in one step extrusion The incorporation of chitosan in the starch/PLA sheets decreased significantly the tensile strength, Young's modulus, elongation at break and density. In addition, the scanning electron microscopy images showed the formation of non-homogeneous mixtures with the presence of pores between the blend compounds, and this fact affected the water vapor barrier properties increasing water vapor permeability, solubility and diffusion coefficients. It was possible to conclude that although the incorporation of chitosan to the starch/PLA sheets has not contributed to obtain materials with suitable properties, it was able to produce them by calendering-extrusion process in pilot scale. Studies about chitosan incorporation in starch and PLA sheets still needed.</p><p>&nbsp;</p><p>DOI: 10.14685/rebrapa.v6i1.208</p><p>&nbsp;</p>

scholarly journals Physical Properties of Starch/Powdered Activated Carbon Composite Films

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4406
Author(s):  
Anita Kwaśniewska ◽  
Michał Świetlicki ◽  
Adam Prószyński ◽  
Grzegorz Gładyszewski
Keyword(s):  
Mechanical Properties ◽  
Activated Carbon ◽  
Water Vapor ◽  
Water Solubility ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Carbon Composite ◽  
Powdered Activated Carbon ◽  
Vapor Permeability

In the present study, starch/powdered activated carbon composite films were prepared by incorporating various amounts of powdered activated carbon (PAC)—1–5, 10, and 15 %—into a starch matrix, using the solvent casting method. The effect of PAC addition on the biopolymer film was investigated. The mechanical properties were examined by ultra-nanoindentation, nanoscratch, and micro-tensile tests. Since the mechanical properties of biopolymer films are correlated with their structure, the effect of PAC addition was tested using X-ray diffraction. The surface parameters morphology and wettability were analyzed by atomic force microscopy (AFM) and contact angle measurements. The barrier properties were examined by determining water vapor permeability and the water solubility index. The obtained results did not show a monotonic dependence of the mechanical parameters on PAC content, with the exception of the maximum strain, which decreased as the amount of the additive increased. The visible effect of PAC addition was manifested in changes in the adhesive force value and in water vapor permeability (WVP). The barrier properties decreased with the increase of the filler content.

Research on Preparation and Properties of Edible Composite Protein Films

2011 ◽  
Vol 87 ◽  
pp. 213-222 ◽  
Author(s):  
Gui Yun Chen ◽  
Qiao Lei
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Sodium Caseinate ◽  
Barrier Properties ◽  
Edible Films ◽  
Protein Isolate ◽  
Vapor Permeability ◽  
Protein Films

Edible films based on whey protein isolate and sodium caseinate were prepared by uniform design method. Glycerol has been incorporated into the edible films as a plasticizer. For all types of films, the influences of components and forming temperature on film properties, such as mechanical properties, water solubility, optical properties, gas and water vapor permeability were investigated. The results suggested that glycerol was the most important factor influencing all the properties of edible composite protein films. However, both increases of sodium caseinate concentration and glycerol content contributed to decrease the barrier properties of gas and water vapor. Among the films studied, group D (prepared with 5% whey protein isolate, 2% sodium caseinate, 50% glycerol at the temperature of 50 °C) showed moderate mechanical properties, optical properties, water solubility and maximum barrier properties of gas and water vapor, with tensile strength=5.85MPa, elongation=101.20%, transparency=91.4%, gas permeability rate=49.92cm3m-2d-10.1MPa-1and water vapor permeability of 0.128×10-11g m-1s-1Pa-1, 0.260×10-11g m-1s-1Pa-1, 0.513×10-11g m-1s-1Pa-1, 1.252×10-11g m-1s-1Pa-1at the RH gradient of 10-40%, 10-50%, 10-60%, 10-70%, respectively.

Preparation of Porous Cellulose Packaging Films in Alcohol Coagulation

2012 ◽  
Vol 262 ◽  
pp. 557-560
Author(s):  
Shan Shan Gao ◽  
Jian Qing Wang ◽  
Xiu Feng Ma ◽  
Lin Zhao
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Fruits And Vegetables ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Vapor Permeability ◽  
Porous Films ◽  
Packaging Films ◽  
Different Types ◽  
Current Concerns

The barrier properties of the cellulose packaging films are current concerns for the fields of fruits and vegetables fresh-keeping packaging. One such porous films commonly used the pore formers as hole-forming materials whereas the compatibility and dispersity were not better with the cellulose solutions. In this study, the porous cellulose packaging films were prepared with natural broad-leaved pulp and LiCl/DMAc with different types of coagulation baths. The effects of methanol, ethanol, isopropanol, LiCl/DMAc and deionized water coagulation baths on the physical structures, oxygen and water vapor permeabilities and mechanical properties of the films were measured. Based on the scanning electron microscpy (SEM) observation, the cross section was loose when used the alcohol coagulations, especially the films with ethanol coagulation showed dactylopores. It was also found that the oxygen permeability had obviously improving with the effect of ethanol, which compared with water vapor permeability of the films. The porous cellulose packaging films had better mechanical properties and up to 12.7MPa which would satisfy the usage in packaging.

scholarly journals Production of starch/poly(lactic acid) sheets containing citric acid and tributyl citrate

2016 ◽  
Vol 7 (2) ◽  
pp. 173 ◽  
Author(s):  
Silvio José Souza ◽  
Nicolli Grecco Marchiore ◽  
Marcella Vitória Galindo ◽  
Fabio Yamashita ◽  
Marianne Ayumi Shirai
Keyword(s):  
Lactic Acid ◽  
Water Vapor ◽  
Citric Acid ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Thermoplastic Starch ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Water Vapor Barrier

In this work thermoplastic starch and poly(lactic acid) (PLA) sheets added of tributyl citrate (TBC) and citric acid was produced by flat extrusion (calendaring-extrusion). The incorporation of TBC and citric acid reduced the rigidity, increased the water vapor permeability (WVP) and density of the sheets. This occurred probably because these compounds acted as plasticizer for PLA and starch. Thus, it was possible to conclude that it was possible to produce starch and PLA blended sheets by extrusion, but studies are still required to find the appropriate concentration of TBC and citric acid that does not significantly impair the water vapor barrier properties.

Hybrid films from plant and bacterial nanocellulose: mechanical and barrier properties

2022 ◽  
Vol 0 (0) ◽  
Author(s):  
Thiago Moreira Cruz ◽  
Adriano Reis Prazeres Mascarenhas ◽  
Mário Vanoli Scatolino ◽  
Douglas Lamounier Faria ◽  
Lays Camila Matos ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Water Vapor ◽  
Mechanical Performance ◽  
Cellulose Nanofibrils ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Contact Angles ◽  
Vapor Permeability ◽  
Hybrid Films

Abstract The accumulation of petroleum polymers compromises biodiversity and causes environmental problems. Nanocellulose enhances biodegradability and can improve the physical-mechanical performance of materials. The objective was to produce and characterize hybrid films composed of bacterial cellulose (BC) and plant nanocellulose from Eucalyptus (Euc) or Pinus (Pin). Films were produced by the casting method using filmogenic suspensions with different cellulose nanofibrils (CNFs) proportions from both the sources (0, 25, 50, 75 and 100 %). CNFs suspensions were characterized by transmission electron microscopy. The morphology of the films was analyzed using scanning electron microscopy. In addition, the transparency, contact angle, wettability, oil and water vapor barrier and mechanical properties were also evaluated. The contact angles were smaller for films with BC and the wettability was greater when comparing BC with plant CNFs (0.10 °  s − 1 {\text{s}^{-1}} for 75 % Euc/25 % BC and 0.20 °  s − 1 {\text{s}^{-1}} for 25 % Euc/75 % BC). The water vapor permeability (WVP) of the 100 % BC films and the 25 % Euc/75 % BC composition were the highest among the studied compositions. Tensile strength, Young’s modulus and puncture strength decreased considerably with the addition of BC in the films. More studies regarding pre-treatments to purify BC are needed to improve the mechanical properties of the films.

Effect of the talc filler on structural, water vapor barrier and mechanical properties of poly(lactic acid) composites

2016 ◽  
Vol 36 (2) ◽  
pp. 181-188 ◽  
Author(s):  
Aleksandra Buzarovska ◽  
Gordana Bogoeva-Gaceva ◽  
Radek Fajgar
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Water Vapor ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Scanning Calorimetry ◽  
Structural Water

Abstract Poly(lactic acid) (PLA) based composite films with different content of talc (5–15 wt%) were prepared by the solvent casting method. The effect of talc on morphological, structural, thermal, barrier and mechanical properties of neat PLA was investigated. The PLA/talc composites revealed a polymorphic crystalline structure, as demonstrated by X-ray diffraction (XRD) study and differential scanning calorimetry (DSC) analysis. The PLA/talc composites also exhibited significantly improved barrier properties (up to 55% compared to neat PLA), as shown by water vapor permeability (WVP) tests. The puncture measurements showed improved mechanical properties at lower content of talc (up to 5 wt%), and increased brittleness of the PLA/talc composite films at higher talc concentrations.

scholarly journals Alginate-Edible Coatings for Application on Wild Andean Blueberries (Vaccinium meridionale Swartz): Effect of the Addition of Nanofibrils Isolated from Cocoa By-Products

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 824
Author(s):  
Carolina Medina-Jaramillo ◽  
Carmen Quintero-Pimiento ◽  
Catalina Gómez-Hoyos ◽  
Robin Zuluaga-Gallego ◽  
Alex López-Córdoba
Keyword(s):  
Water Vapor ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Vapor Permeability ◽  
Edible Coatings ◽  
Refrigerated Storage ◽  
Water Vapor Barrier ◽  
Postharvest Management ◽  
Wild Blueberry ◽  
By Products

Edible coatings and films are appealing strategies for the postharvest management of blueberries. In the current work, alginate and alginate/cellulose nanofibril (CNF) edible coatings crosslinked with calcium chloride were developed for application on Andean blueberry (a promissory wild blueberry). Cocoa by-products were valorized through the isolation of their CNFs, and these were incorporated in the edible coatings. Edible coating formulations were based on blends of alginate (2% w/v), CNFs (0%, 0.1%, or 0.3%), glycerol, and water. In addition, stand-alone films were prepared, and their light and water vapor barrier properties were studied before applying the coating on the fruit surface. The results show that the addition of CNFs caused a significant decrease in the transparency and the water vapor permeability of the alginate films. After applying on the Andean blueberry fruits, the alginate and alginate/CNF coatings enhanced the appearance and the firmness of the fruits. Moreover, they significantly reduced the respiration rate and the water loss of the Andean blueberries throughout the 21 days of refrigerated storage. Alginate and alginate/CNFs coatings may be considered a useful alternative for the delay of the postharvest deterioration of Andean blueberries.

scholarly journals Effect of cellulose nanofibers concentration on mechanical, optical, and barrier properties of gelatin-based edible films

DYNA ◽  
2015 ◽  
Vol 82 (191) ◽  
pp. 219-226 ◽  
Author(s):  
Ricardo David Andrade Pizarro ◽  
Olivier Skurtys ◽  
Fernando Osorio-Lira
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Cellulose Nanofibers ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Edible Films ◽  
Mechanical Tests ◽  
Vapor Permeability ◽  
Glycerol Concentration ◽  
Gelatin Concentration

The effect of gelatin, glycerol, and cellulose nanofiber (CNFs) concentrations on the mechanical properties, water vapor permeability, and color parameters of films was evaluated. The results indicate that the color is only affected by the gelatin concentration. Mechanical tests indicated that with increasing concentration of gelatin and CNFs, there is an increase in tensile strength, whereas an increase in glycerol concentration causes an increase in elongation, making the films more flexible. An increased concentration of gelatin and glycerol makes the film more permeable to water vapor, while an increase in the concentration of CNFs reduces this property. Finally, the addition of CNFs to gelatin-based films improves their mechanical and barrier properties (water vapor) without affecting the appearance (color) of the films.

scholarly journals Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3090
Author(s):  
Anita Ptiček Siročić ◽  
Ana Rešček ◽  
Zvonimir Katančić ◽  
Zlata Hrnjak-Murgić
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Water Vapor ◽  
Aluminum Oxide ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Oxide Compound ◽  
Bilayer Films ◽  
Oxide Particles

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al2O3 showed the lowest WVTR value.

Sign in / Sign up

Export Citation Format

Share Document