A Novel Wild-Land Fire-Fighting Foam for Minimizing the Phytotoxicity of Wood Burning-Derived Smoke Tested in Living Plant Cells

2014 ◽  
Vol 875-877 ◽  
pp. 725-733
Author(s):  
Atsuko Noriyasu ◽  
Kohei Otsuka ◽  
Yuki Ishizaki ◽  
Yutaka Tanaike ◽  
Ken Matsuyama ◽  
...  

Impact of wild-land fires to the ecosystem is highly complex. Damages to the ecosystem can be attributed not only to the direct impact of fire and release of toxic post-combustion gasses but also to the spraying of fire-fighting chemicals. Fire-fighting foam (FFF) agents are frequently applied for controls in wild-land fires including forest fire. However, effects of FFFs on the composition of the post-combustion gasses and the phytotoxicity of smoke derived from burning woods have not been determined to date. In the present study, with Fourier transform infrared spectroscopy (FT-IR), we have analyzed the chemical composition of the gasses derived from wood slices exposed to two distinct manners of combustion, namely, smoldering (gradual combustion without flame) and rapid burning (combustion with flame). Tested samples include slices of Japanese cedar, Japanese cypress, and Western hemlock. The amount of hydrocarbons, detected in the post-combustion gas such as methane, ethane, ethylene, propane, hexane, formaldehyde, acrolein and phenol, were higher in the gasses from smoldered samples. The major hydrocarbon found in the post-combustion gases processed in the presence of pilot flame was methane. Other hydrocarbons were hardly detectable. Addition of FFFs, namely, a soap-based FFF (designated as MK-08) and a detergent co cocktail-based FFF (Phos-chek) onto wooden slices resulted in slight increase in other hydrocarbons in the gasses derived from flame-driven combustion of wood slices. Interestingly, addition of Phos-chek drastically elevated the phytotoxicity of post-combustion gas derived from Western hemlock slices heated in the presence of pilot flame when assessed using the suspension cultured tobacco cells. In contrast, the soap-based FFF tested here did not alter the phytotoxicity of the post-combustion gasses, suggesting that soap-based FFF might minimize the impact of the fire-fighting activity to the living plants consisting the ecosystem in the forests and wild-land.

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 276
Author(s):  
Hang Jia ◽  
Haoxi Ben ◽  
Fengze Wu

Biochar is generally accepted and increasingly valued in scientific circles as solid products in the thermochemical conversion of biomass, mainly because of its rich carbon content. The purpose of this research is to investigate the impact of biochar from different sources on wheat growth. In particular, this work focused on the effect of different preparation methods and raw material of biochar on the growth of wheat and aim to find a potential soil substitute that can be used for crop cultivation. Two synthetic methods were evaluated: hydrothermal conversion and pyrolysis. The characterization of biochar was determined to explore the impact of its microstructure on wheat growth. The results show that the yield of biochar produced from high-pressure reactor is significantly higher than that obtained by using microwave reactor. For example, the biochar yield obtained through the former is about six times that of the latter when using steamed bread cooked as biomass raw material. In addition, the growth trend of wheat indicates that biochar has different promoting effects on the growth of wheat in its weight and height. The pyrolyzed carbon is more suitable for wheat growth and is even more effective than soil, indicating that pyrolyzed biochar has more potential to be an alternative soil in the future. Moreover, this research tries to explore the reasons that affect crop growth by characterizing biochar (including scanning electron microscopy (SEM), biofilm electrostatic test (BET) and Fourier transform infrared (FT-IR)). The results indicate that the biochar containing more pits and less hydroxyl functional are more suitable for storing moisture, which is one of the significant factors in the growth of crops. This study provides evidence of the effects of biochar on crop growth, both in terms of microstructure and macroscopic growth trends, which provides significant benefits for biochar to grow crops or plants.


2011 ◽  
Vol 366 ◽  
pp. 326-329 ◽  
Author(s):  
Jun Jun Wu ◽  
Hai Feng Chen ◽  
Shi Jiang Zhao ◽  
Bin Li

This paper studied the influence of heat treatment on the pyrophyllite structure and acid-soluble properties of alumina. Qualitative tests had been performed in studying pyrophyllite crystal at different temperatures by XRD, TG-DTA, FT-IR and quantitative analysis of Al2O3. The quantitative titration method studied the dissolve characteristics of the different heat treatment samples in different acid conditions, and then a numerical simulation was done. The results showed that at temperatures below 480 °C, the pyrophyllite did not change the basic structure. 480~700 °C dehydroxylation reaction occurred, and the structure water of pyrophyllite is removed, and then turned into partial pyrophyllite. Dissolution experiments showed that after thermal activation the behavior of alumina in acid the dissolution was different, which was affected by hydrochloric acid concentration, heat activation temperature and acid leaching time. When the calcinations temperature was 700 °C, the dissolution amount of alumina was largest. These works could provide some theoretical basis for further application of pyrophyllite research.


2004 ◽  
Vol 155 (7) ◽  
pp. 263-277 ◽  
Author(s):  
Marco Conedera ◽  
Gabriele Corti ◽  
Paolo Piccini ◽  
Daniele Ryser ◽  
Francesco Guerini ◽  
...  

The Southern Alps, in particular the Canton Ticino, is the region of Switzerland that is most affected by the phenomenon of forest fires. Therefore, the cantonal authorities are continually confronted with problems of prevention, fire fighting and mitigation of the effects of forest fires. In this article forest fire management in Canton Ticino is analyzed in historical terms, verifying in particular the impact of the methods used and the improvement of technology addressing the frequency of events and the extent of burned surfaces. In this way it has been possible to show how a few structural measures (better organization of fire fighting crews and equipment, introduction of aerial fire fighting techniques, electrification followed by construction of shelters along railway lines, etc.) have rather reduced the extent of burned surfaces, while legislative measures such as restrictions of open fires help to reduce the number of forest fires.


2014 ◽  
Vol 1053 ◽  
pp. 268-275
Author(s):  
Hong Wen Zhang ◽  
Shi Long Zhou ◽  
Yang Zhang ◽  
Yan Jiang ◽  
Qiang Yu

Different molecular weight of block coupling agents with well-defined structures have been synthesized successfully by atom transfer radical polymerization (ATRP) from styrene (St), butyl methacrylate (BMA) and 3-methoxyacryloyl-propyltrimethoxyl silicon (KH-570) are as monomer. The structures and compositions of macromolecular coupling agents have been characterized by means of infrared spectrum (FT-IR), ultraviolet spectrum (UV), nuclear magnetic resonance spectroscopy (1H-NMR) and gel permeation chromatography (GPC). And their effects on the polystyrene/silica (PS/SiO2) composite materials have been studied. The results show that interface compatibility and mechanical properties of composite materials containing macromolecule coupling agents are improved significantly. The composite materials with block macromolecular coupling agents possess more excellent comprehensive performance. Furthermore, the impact strength increased by 110% when comparing with composite materials which are not modified by the coupling agents.


1986 ◽  
Vol 108 (3) ◽  
pp. 455-459 ◽  
Author(s):  
O¨. L. Gu¨lder

Empirical formulae are presented by means of which the partial pressures of CO2 and H2O in the combustion gases of aviation fuel-air and diesel fuel-air systems can be calculated as functions of pressure, temperature, equivalence ratio, and hydrogen-to-carbon atomic ratio of the fuel. The formulae have been developed by fitting the data from a detailed chemical equilibrium code to a functional expression. Comparisons of the results from the proposed formulae with the results obtained from a chemical equilibrium code have shown that the mean absolute error in predicted partial pressures is around 0.8 percent. These formulae provide a very fast and easy means of predicting partial pressures of CO2 and H2O as compared to equilibrium calculations, and they are also applicable to gasolines, residual fuels, and pure alkanes and aromatics as well as aviation and diesel fuels.


Author(s):  
H. Boonstra ◽  
A. C. Groot ◽  
C. A. Prins

This paper presents the outcome of a study on the feasibility of a nuclear powered High-Speed Pentamaran, initiated by Nigel Gee and Associates and the Delft University of Technology. It explores the competitiveness of a nuclear power plant for the critical characteristics of a marine propulsion plant. Three nuclear reactor types are selected: the Pressurized Water Reactor (PWR), the Pebble-bed and Prismatic-block HTGR. Their characteristics are estimated for a power range from 100 MWth to 1000 MWth in a parametric design, providing a level base for comparison with conventional gas turbine technology. The reactor scaling is based on reference reactors with an emphasis on marine application. This implies that preference is given to passive safety and simplicity, as they are key-factors for a marine power plant. A case study for a 60-knot Pentamaran shows the impact of a nuclear power plant on a ship designed with combustion gas turbine propulsion. The Prismatic-block HTGR is chosen as most suitable because of its low weight compared to the PWR, in spite of the proven technology of a PWR. The Pebble-bed HTGR is considered too voluminous for High-Speed craft. Conservative data and priority to simple systems and high safety leads to an unfavorable high weight of the nuclear plant in competition with the original gas turbine driven Pentamaran. The nuclear powered ship has some clear advantages at high sailing ranges.


2019 ◽  
Vol 66 (3) ◽  
pp. 304-313
Author(s):  
Elizabeth C Cole ◽  
Michael Newton

Abstract Riparian ecosystems provide critical habitat and functions while being some of the most productive areas in forests. Both conifers and hardwoods contribute to maintenance of habitat and function. To determine the impact of water stress on growth of red alder (Alnus rubra Bong.) and western hemlock (Tsuga heterophylla [Raf.] Sarg.), we installed Nelder type 1a combined with replacement series plots on three Oregon Coast Range sites. Densities ranged from 988 to 85,400 trees/hectare, with ratios (hemlock:alder) of 100:0, 75:25, 50:50, 25:75, and 0:100. In the first 4 years after planting, alder used water in the growing season at greater depths earlier than western hemlock. Higher densities resulted in greater water stress later in the growing season in weeded areas (maintained by herbicide applications), but stress was similar across densities in unweeded areas. Water stress at early ages was correlated with decreased size 14 or 24 years after planting for both species, but these correlations were confounded with other effects of density. Increasing water availability in areas with low summer precipitation could enhance growth of red alder and western hemlock, even in highly productive riparian areas.


1999 ◽  
Vol 121 (4) ◽  
pp. 642-648 ◽  
Author(s):  
P. Chiesa ◽  
G. Lozza

This paper analyzes the fundamentals of IGCC power plants with carbon dioxide removal systems, by a cycle configuration alternative to the one discussed in Part A (with oxygen-blown combustion). The idea behind this proposal is to overcome the major drawbacks of the previous solution (large oxygen consumption and re-design of the gas turbine unit), by means of a semiclosed cycle using air as the oxidizer. Consequently, combustion gases are largely diluted by nitrogen and cannot be simply compressed to produce liquefied CO2 for storage or disposal. However, CO2 concentration remains high enough to make separation possible by a physical absorption process. It requires a re-pressurization of the flow subtracted from the cycle, with relevant consequences on the plant energy balance. The configuration and the thermodynamic performance of this plant concept are extensively addressed in the paper. As in the first part, the influence of the pressure ratio is discussed, but values similar to the ones adopted in commercial heavy-duty machines provided here acceptable performance. Proper attention was paid to the impact of the absorption process on the energy consumption. The resulting net overall efficiency is again in the 38–39 percent range, with assumptions fully comparable to the ones of Part A. Finally, we demonstrated that the present scheme enables the use of unmodified machines, but large additional equipment is required for exhausts treatment and CO2 separation. A final comparison between the two semiclosed cycle concepts was therefore addressed.


1995 ◽  
Vol 22 (3) ◽  
pp. 158-164 ◽  
Author(s):  
Tetsuya Ganbo ◽  
Ken-ichi Hisamatsu ◽  
Hajime Inoue ◽  
Yutaka Kitta ◽  
Mayumi Nakajima ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document