Synthesis, Structure and Characterization of a Novel 3D Zinc Organophosphonate

2014 ◽  
Vol 936 ◽  
pp. 915-918
Author(s):  
Hui Duan Li
Keyword(s):  
Powder Diffraction ◽  
Organic Ligand ◽  
Water Molecules ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
One Dimensional ◽  
X Ray ◽  
Open Framework ◽  
Solvothermal Conditions

A novel zinc organophosphonate was synthesized under solvothermal conditions by using [piperazine-1,4-diyldi (methylene)] bis (phosphonic acid) as a organic ligand. Single-crystal X-ray diffraction analysis reveals that compound 1 crystallized in the triclinic space group P-1 (No. 2). Compound 1 formulated as Zn (O3PCH2NHC4H8NHCH2PO3)·H2O. Compound 1 featured a 3D open-framework. Notably, the structure of compound 1 featured one-dimensional channel in the [00 direction. Water molecules were located in these channels. Further characterizations of compound 1 have been performed, including X-ray powder diffraction, IR, ICP and CHN analyses.

Two-dimensional lanthanide(III) coordination polymers: solvothermal synthesis, crystal structure, and stability

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Runmei Ding ◽  
Zixin He ◽  
Meilin Wang ◽  
Danian Tian ◽  
Peipei Cen
Keyword(s):  
Crystal Structure ◽  
Coordination Polymers ◽  
Solvothermal Synthesis ◽  
Analysis Data ◽  
Water Stability ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
X Ray ◽  
Solvothermal Conditions

AbstractBased on 2-(4-pyridyl)-terephthalate (H2pta) and oxalate ligands, two new lanthanide-containing coordination polymers (CPs), [Tb(pta)(C2O4)0.5(H2O)2)]·2H2O (1) and [Sm(pta)(C2O4)0.5(H2O)2)]·2H2O (2), have been synthesized under solvothermal conditions. The structures of both 1 and 2 have been determined by single-crystal X-ray diffraction. Infrared, elemental analysis, powder X-ray diffraction and thermogravimetric analysis data are also presented. The crystals of 1 and 2 exhibit isostructural layer-like networks, crystallizing in the triclinic space group P$‾{1}$. The layers are further stabilized and associated into 3D architectures through hydrogen bonding. Remarkably, the CPs 1 and 2 exhibit excellent water stability and remarkable thermostability with thermal decomposition temperatures of more than 420 °C.

Polysulfonylamine, CXXV [1]. Neue Komplexe von Disulfonylaminen mit Kronenethern - im voraus entworfen oder zufällig entdeckt / Polysulfonylamines, CXXV [1]. New Complexes of Disulfonylam ines with Crown Ethers - Preconceived or Discovered by Serendipity

2000 ◽  
Vol 55 (3-4) ◽  
pp. 299-316 ◽  
Author(s):  
Dagmar Henschel ◽  
Karna Wijaya ◽  
Oliver Moers ◽  
Armand Blaschette ◽  
Peter G. Jones
Keyword(s):  
Hydrogen Bonds ◽  
X Ray Diffraction ◽  
Ladder Structure ◽  
Triclinic Space Group ◽  
One Dimensional ◽  
X Ray ◽  
Bonding System ◽  
Supramolecular Aggregate ◽  
Guest Species ◽  
The One

Abstract In a study aim ed at the „deconstruction“ of the supramolecular aggregate 3(18C6) · 2HN( SO2Me)2 (1,18C6 = 18-crown-6), which is known to display a ladder structure with two isotactic [18C6 - Me SO2N(H)SO2Me···)∞ polymers forming the uprights and symmetrically N - H···O bonded 18C6 rings providing the rungs, the following crystalline complexes were isolated and (except for 2b) characterized by low-temperature X-ray diffraction: 18C6-ClN (SO2Me)2 (2a, triclinic, space group P1̅, Z = 2), 18C6-PhN (SO2Me)2 (2b), 18C6 -MeN(SO2Me)2 (3, monoclinic, P21/c, Z = 8), Bz18C6-HN(SO2Me)2 (4, Bz18C6 = benzo-18-crown-6, monoclinic, P21/n, Z = 4), 18C6-2 MeN (SO2Me)2 (5, triclinic, P1̅, Z = 1), 18C6-Me2SO- HN( SO2Me) (SO2Ph) (13, triclinic, P1̅, Z = 2), and 18C6-H2OMe2SO·2HN(SO2Me)2 (14, triclinic, P1̅, Z = 2). Each of the one-dimensional polymers 2a (syndiotactic), 3 (disyndiotactic) and 4 (isotactic) mimics a single upright of 1; in contrast to 1 and 2a, where the intra-catemer connectivity solely relies on S - Me ··· crow n and crown ··· O = S hydrogen bonds, this bonding system is reinforced in 3 by N -Me ··· crown and in 4 by N - H ··· crown hydrogen bonds. Complex 5 is monomeric and matches a fragment formally extruded from the catemer 3; moreover, 3 and 5 represent a rare case of two structurally characterized 18C6 complexes containing the same uncharged guest species in distinct molecular ratios. The surprising structure of the quaternary adduct 14 exhibits an [18C6 ··· MeSO2N(H)SO2Me ··· ]∞ chain, which can be regarded both as an isolated, though unmodified upright from the ladder 1 and, being syndiotactic, as a stereochemical analogue of 2a; the potentially rung-forming *NH functions in the chain are blocked by hydrogenbonded side chains of the type * N - H ··· water ··· sulfoxide ··· H - N (SO2Me)2. The ternary complex 13 consists of chains [18C6 ··· Me2SO ··· H - N (SO2Ph)SO2Me···]∞ and is not closely related to the other structures

scholarly journals The Synthesis and Characterization of a Novel One-Dimensional Bismuth (III) Coordination Polymer as a Precursor for the Production of Bismuth (III) Oxide Nanorods

Crystals ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 113
Author(s):  
Younes Hanifehpour ◽  
Babak Mirtamizdoust ◽  
Jaber Dadashi ◽  
Ruiyao Wang ◽  
Mahboube Rezaei ◽  
...  
Keyword(s):  
Single Crystal ◽  
Coordination Compound ◽  
Organic Ligand ◽  
One Dimensional ◽  
X Ray ◽  
X Ray Crystallography ◽  
Oxide Nanorods ◽  
Pure Phase ◽  
3D Framework

A novel Bi (III) coordination compound, [Bi(HQ)(Cl)4]n ((Q = pyridine-4-carbaldehyde thiosemicarbazone), was prepared in this research using a sonochemical technique. SEM, infrared spectroscopy (IR), XRD, and single-crystal X-ray analysis were utilized to analyze the Bi(III) coordination compound. The structure determined using single-crystal X-ray crystallography indicates that the coordination compound is a 1D polymer in solid state and that the coordination number of bismuth (III) ions is six, (BiSCl5), with one S donor from the organic ligand and five Cl donors from anions. It is equipped with a hemidirectional coordination sphere. It is interesting that the ligand has been protonated in the course of the reaction with a Cl- ion balancing the charge. This compound’s supramolecular properties are directed and regulated by weak directional intermolecular interactions. Through π–π stacking interactions, the chains interact with one another, forming a 3D framework. Thermolysis of the compound at 170 °C with oleic acid resulted in the formation of pure phase nanosized Bi (III) oxide. SEM technique was used to examine the morphology and size of the bismuth (III) oxide product produced.

Preparation and Structural Characterization of Chain Ni (II) Coordination Polymer Material

2011 ◽  
Vol 322 ◽  
pp. 369-372
Author(s):  
Zhi Xiang Ji
Keyword(s):  
Coordination Polymer ◽  
Polymer Material ◽  
Chain Structure ◽  
Monoclinic Space Group ◽  
Dimensional Chain ◽  
X Ray Diffraction ◽  
One Dimensional ◽  
X Ray ◽  
A Chain

A chain Ni (II) coordination polymer material was prepared and characterized by elemental analysis and single-crystal X-ray diffraction. It crystallizes in monoclinic, space group C2/c with a = 1.24348(13) nm, b = 1.29477(12) nm, c = 1.51480(17) nm and Dc = 1.401 g•cm-3. The results of structural analysis indicated that each Ni (II) ion forms six-coordinated with nitrogen atoms of pyridine and thiocyanate, and the Ni (II) coordination polymer material formed one dimensional chain structure by the interaction of pyridine rings.

Structural and IR-spectroscopic characterization of magnesium acesulfamate

2016 ◽  
Vol 71 (1) ◽  
pp. 51-55 ◽  
Author(s):  
Oscar E. Piro ◽  
Gustavo A. Echeverría ◽  
Beatriz S. Parajón-Costa ◽  
Enrique J. Baran
Keyword(s):  
Crystal Structure ◽  
Aqueous Solution ◽  
Elemental Analysis ◽  
Spectroscopic Characterization ◽  
Magnesium Carbonate ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
X Ray ◽  
Ir Spectroscopic

AbstractMagnesium acesulfamate, Mg(C4H4NO4S)2·6H2O, was prepared by the reaction of acesulfamic acid and magnesium carbonate in aqueous solution, and characterized by elemental analysis. Its crystal structure was determined by single crystal X-ray diffraction methods. The substance crystallizes in the triclinic space group P1̅ with one molecule per unit cell. The FTIR spectrum of the compound was also recorded and is briefly discussed. Some comparisons with other simple acesulfamate and saccharinate salts are also made.

Application of Gandolfi X-Ray Diffraction to the Characterization of Reaction Products from the Alteration of Simulated Nuclear Wastes

1980 ◽  
Vol 24 ◽  
pp. 265-269 ◽  
Author(s):  
C. A. F. Anderson ◽  
M. E. Zolensky ◽  
D. K. Smith ◽  
W. P. Freeborn ◽  
B. E. Scheetz
Keyword(s):  
Powder Diffraction ◽  
Individual Particle ◽  
Nuclear Wastes ◽  
Reaction Products ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Individual ◽  
Individual Grains ◽  
Phase Characterization

AbstractAccurate phase characterization of the alteration products of rad-waste requires the separation and identification of scattered individual grains from among the bulk product. These grains are typically 5 to 100 μm in size. Bulk x-ray powder diffraction will normally not detect these minor phases, and even if the phase can be detected, it often may not be identifiable. The use of the Gandolfi technique with the individual particle not only facilitates the identification, but also allows the assignment of the identification to the specific grain.

scholarly journals Synthesis, Structures and Electrochemical Properties of Lithium 1,3,5-Benzenetricarboxylate Complexes

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 126 ◽  
Author(s):  
Pei-Chi Cheng ◽  
Bing-Han Li ◽  
Feng-Shuen Tseng ◽  
Po-Ching Liang ◽  
Chia-Her Lin ◽  
...  
Keyword(s):  
Electrochemical Properties ◽  
Electrode Materials ◽  
Three Dimensional ◽  
Lithium Ion ◽  
Water Molecules ◽  
X Ray Diffraction ◽  
One Dimensional ◽  
X Ray ◽  
Crystal Transformation ◽  
Discharge Capacities

Four lithium coordination polymers, [Li3(BTC)(H2O)6] (1), [Li3(BTC)(H2O)5] (2), [Li3(BTC)(μ2-H2O)] (3), and [Li(H2BTC)(H2O)] (4) (H3BTC = 1,3,5-benzenetricarboxylatic acid), have been synthesized and characterized. All the structures have been determined using single crystal X-ray diffraction studies. Complexes 1 and 2 have two-dimensional (2-D) sheets, whereas complex 3 has three-dimensional (3-D) frameworks and complex 4 has one-dimensional (1-D) tubular chains. The crystal-to-crystal transformation was observed in 1–3 upon removal of water molecules, which accompanied the changes in structures and ligand bridging modes. Furthermore, the electrochemical properties of complexes 3 and 4 have been studied to evaluate these compounds as electrode materials in lithium ion batteries with the discharge capacities of 120 and 257 mAhg−1 in the first thirty cycles, respectively.

Synthesis and crystallographic studies of two new 1,3,5-triazines

2020 ◽  
Vol 76 (4) ◽  
pp. 322-327
Author(s):  
Emmanuel Blas Patricio-Rangel ◽  
Margarita Tlahuextl ◽  
Hugo Tlahuext ◽  
Antonio Rafael Tapia-Benavides
Keyword(s):  
Noncovalent Interactions ◽  
Synthesis And Characterization ◽  
Water Molecules ◽  
X Ray Diffraction ◽  
X Ray ◽  
Positional Disorder ◽  
Hydrated Salt ◽  
Symmetry Space ◽  
Symmetry Space Group

The synthesis and characterization of two new 1,3,5-triazines containing 2-(aminomethyl)-1H-benzimidazole hydrochloride as a substituent are reported, namely, 2-{[(4,6-dichloro-1,3,5-triazin-2-yl)amino]methyl}-1H-benzimidazol-3-ium chloride, C11H9Cl2N6 +·Cl− (1), and bis(2,2′-{[(6-chloro-1,3,5-triazine-2,4-diyl)bis(azanediyl)]bis(methylene)}bis(1H-benzimidazol-3-ium)) tetrachloride heptahydrate, 2C19H18ClN9 2+·4Cl−·7H2O (2). Both salts were characterized using single-crystal X-ray diffraction analysis and IR spectroscopy. Moreover, the NMR (1H and 13C) spectra of 1 were obtained. Salts 1 and 2 have triclinic symmetry (space group P-1) and their supramolecular structures are stabilized by hydrogen bonding and offset π–π interactions. In hydrated salt 2, the noncovalent interactions yield pseudo-nanotubes filled with chloride anions and water molecules, which were modelled in the refinement with substitutional and positional disorder.

A one-dimensional coordination polymer with a three-dimensional supramolecular framework:catena-poly[[[(3,4,7,8-tetramethyl-1,10-phenanthroline)cadmium(II)]-μ3-4,4′-sulfonyldibenzoato] trihydrate]

2013 ◽  
Vol 69 (3) ◽  
pp. 241-243 ◽  
Author(s):  
Jun Wang ◽  
Jian-Qing Tao ◽  
Xiao-Juan Xu ◽  
Chun-Yun Tan
Keyword(s):  
Three Dimensional ◽  
Water Molecules ◽  
X Ray Diffraction ◽  
Polymeric Compound ◽  
Chain Polymer ◽  
One Dimensional ◽  
X Ray ◽  
Carboxylate Groups ◽  
Metal Organic ◽  
Coordination Patterns

In the title mixed-ligand metal–organic polymeric compound, {[Cd(C14H8O6S)(C16H16N2)]·3H2O}n, the asymmetric unit contains a crystallographically unique CdIIatom, one doubly deprotonated 4,4′-sulfonyldibenzoic acid (H2SDBA) ligand, one 3,4,7,8-tetramethyl-1,10-phenanthroline (TMPHEN) molecule and three solvent water molecules. Each CdIIcentre is six-coordinated by two O atoms from a chelating carboxylate group of a SDBA2−ligand, two O atoms from monodentate carboxylate groups of two different SDBA2−ligands and two N atoms from a chelating TMPHEN ligand. There are two coordination patterns for the carboxylate groups of the SDBA2−ligand, with one in a μ1-η1:η1chelating mode and the other in a μ2-η1:η1bis-monodentate mode. Single-crystal X-ray diffraction analysis revealed that the title compound is a one-dimensional double-chain polymer containing 28-membered rings based on the [Cd2(CO2)2] rhomboid subunit. More interestingly, a chair-shaped water hexamer cluster is observed in the compound.

scholarly journals Temperature-dependent structural change of 1D ice, water nanopipe, in crystal

2014 ◽  
Vol 70 (a1) ◽  
pp. C565-C565
Author(s):  
Akio Wakahara ◽  
Yasuko In
Keyword(s):  
Structural Change ◽  
Water Molecules ◽  
Fold Axis ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
Crystal Axis ◽  
One Dimensional ◽  
X Ray ◽  
Ice Water ◽  
Cluster Unit

One-dimensional ice (1D ice) is formed in the single crystal prepared by mixing tryptophan and pyridoxal-5-phosphate in aqueous solution. This ice (diameter=1.649nm at 90K) consists of a hollow-type nanowire, viz., water nanopipe, and the structure is constructed by piling up the cluster unit of 15 water molecules, five independent waters (W1,--W5) of which are arranged around a 3-fold axis. As can be seen from the side view of this nanopipe, a tape structure is made of the continuous chair-type six-membered rings running parallel to the longest crystal axis, and its three tapes arranged around 3-fold axis are linked together via two kinds of hydrogen bonds of W5 (W5-W2 and W5-W4). Thus, the overall structure of this 1D ice could be described as three-square nanometric column. In order to investigate the temperature-dependent structural change of 1D ice, the crystal structure was refined using the X-ray diffraction data measured at different temperature between 90K and 293K. From these results, it was confirmed that the nanopipe structure is stable under 200K, but W5 and W4 disappear at 220K and 273K, respectively, indicating the importance of W5 for the structural stability of 1D ice.

Sign in / Sign up

Export Citation Format

Share Document