Synthesis of Mesoporous Silica Nanoparticles for Drug Delivery

2014 ◽  
Vol 602-603 ◽  
pp. 67-70
Author(s):  
Ya Zhen Wu ◽  
Xiao Yun Jia ◽  
Yuan Hua Lin ◽  
De Ping Liu
Keyword(s):  
Drug Delivery ◽  
Mesoporous Silica ◽  
Silica Nanoparticles ◽  
Surface Area ◽  
Mesoporous Silica Nanoparticles ◽  
Close Correlation ◽  
Release Kinetic ◽  
Incipient Wetness Impregnation ◽  
Drug Delivery Carrier

Mesoporous silica nanoparticles (MSNs) is an attractive candidate as a drug delivery carrier due to their large surface area, high pore volume and t intrinsic biocompatibility. Here, MSNs were synthesized by the hydrolysis and condensation of tetraethyl orthosilicate (TEOS) with cetyltrimethylammonium bromide (CTAB) acting as structural directing agent. A large mesopore with diameter of 3.8 to 5.5 nm of MCM-41style can be obtained via the addition of 1,3,5-trimethylbenzene. Metoprolol tartrate as a selective β1 receptor blocker was embedded on MSNs by the incipient wetness impregnation. The delivery profiles were collected in vitro in SBF at pH 7.4. A close correlation can be observed between the drug release kinetic and the mesopore size and specific surface area of MSNs.

scholarly journals Synthesis and Optimization of Mesoporous Silica Nanoparticles for Ruthenium Polypyridyl Drug Delivery

Pharmaceutics ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 150
Author(s):  
Siti Norain Harun ◽  
Haslina Ahmad ◽  
Hong Ngee Lim ◽  
Suet Lin Chia ◽  
Martin R. Gill
Keyword(s):  
Drug Delivery ◽  
Mesoporous Silica ◽  
Silica Nanoparticles ◽  
Cell Lines ◽  
Mesoporous Silica Nanoparticles ◽  
High Surface ◽  
Prolonged Treatment ◽  
Cell Cycle Distribution ◽  
Release Kinetic ◽  
Ruthenium Polypyridyl

The ruthenium polypyridyl complex [Ru(dppz)2PIP]2+ (dppz: dipyridophenazine, PIP: (2-(phenyl)-imidazo[4,5-f ][1,10]phenanthroline), or Ru-PIP, is a potential anticancer drug that acts by inhibiting DNA replication. Due to the poor dissolution of Ru-PIP in aqueous media, a drug delivery agent would be a useful approach to overcome its limited bioavailability. Mesoporous silica nanoparticles (MSNs) were synthesized via a co-condensation method by using a phenanthrolinium salt with a 16 carbon length chain (Phen-C16) as the template. Optimization of the synthesis conditions by Box–Behnken design (BBD) generated MSNs with high surface area response at 833.9 m2g−1. Ru-PIP was effectively entrapped in MSNs at 18.84%. Drug release profile analysis showed that Ru-PIP is gradually released, with a cumulative release percentage of approximately 50% at 72 h. The release kinetic profile implied that Ru-PIP was released from MSN by diffusion. The in vitro cytotoxicity of Ru-PIP, both free and MSN-encapsulated, was studied in Hela, A549, and T24 cancer cell lines. While treatment of Ru-PIP alone is moderately cytotoxic, encapsulated Ru-PIP exerted significant cytotoxicity upon all the cell lines, with half maximal inhibitory concentration (IC50) values determined by MTT (([3-(4,5-dimethylthiazol-2-yl)-2,5-dephenyltetrazolium bromide]) assay at 48 h exposure substantially decreasing from >30 µM to <10 µM as a result of MSN encapsulation. The mechanistic potential of cytotoxicity on cell cycle distribution showed an increase in G1/S phase populations in all three cell lines. The findings indicate that MSN is an ideal drug delivery agent, as it is able to sustainably release Ru-PIP by diffusion in a prolonged treatment period.

scholarly journals Theranostic Mesoporous Silica Nanoparticles Loaded With a Curcumin-Naphthoquinone Conjugate for Potential Cancer Intervention

2021 ◽  
Vol 8 ◽  
Author(s):  
Lara G. Freidus ◽  
Pradeep Kumar ◽  
Thashree Marimuthu ◽  
Priyamvada Pradeep ◽  
Yahya E. Choonara
Keyword(s):  
Drug Delivery ◽  
Mesoporous Silica ◽  
Cell Viability ◽  
Silica Nanoparticles ◽  
Cell Lines ◽  
Mesoporous Silica Nanoparticles ◽  
Cancer Targeting ◽  
The Novel ◽  
High Background

A novel theranostic molecule, derived from curcumin (Cur) and naphthoquinone (NQ), allowing for cancer targeting, detection and treatment was previously described and termed CurNQ. To allow for enhanced theranostic capabilities, advanced drug delivery techniques are required. To this end, mesoporous silica nanoparticles (MSN) were synthesized and CurNQ was loaded into its pores to form the novel nanosystem MSN_CurNQ. The formation of the nanosystem aimed to augment the drug delivery of CurNQ through the EPR effect and sustained release. Moreover, the loading of CurNQ into its pores, formed a fluorescent nanoparticle that can be tracked, detected and visualized. Herein, the synthesis of a novel nanosystem is described and its theranostic potential are explored in vitro. MSN with an average size of 108 d.nm, a zeta potential of −42 mV and a PDI of 0.150 were synthesized and were impregnated with CurNQ to form the novel nanosystem MSN_CurNQ. MSN_CurNQ was demonstrated to have pH-responsivity whereby after 96 h, at pH 7.4, 31.5% of CurNQ was released from the MSN compared to 57% release at pH 6.8, corresponding to an increase of 25.5% in release with a 0.6 pH drop. The innate fluorescence was then characterized through confocal and fluorescence microscopy. Microscopy images illustrated the distinct, high intensity innate fluorescence with a high background to target ratio, thus confirming detection capabilities and potentially extending MSN_CurNQ’s application to molecular imaging purposes. Moreover, the chemotherapeutic potential of MSN_CurNQ was demonstrated as cell viability was reduced to below 50% in OVCAR-5, CACO-2, CHLA, and MCF-7 cell lines. Furthermore, MSN_CurNQ displayed tumor specific toxicity whereby the cell viability was reduced to a far greater extent in the cancer cell lines compared to a healthy fibroblast cell line (p = 0.000). Indeed, the novel MSN_CurNQ nanosystem has potential for applications in cancer targeting, detection and treatment.

scholarly journals Therapeutic Potential of Polymer-Coated Mesoporous Silica Nanoparticles

2019 ◽  
Vol 10 (1) ◽  
pp. 289 ◽  
Author(s):  
Kuldeep K. Bansal ◽  
Deepak K. Mishra ◽  
Ari Rosling ◽  
Jessica M. Rosenholm
Keyword(s):  
Drug Delivery ◽  
Mesoporous Silica ◽  
Silica Nanoparticles ◽  
Therapeutic Potential ◽  
Mesoporous Silica Nanoparticles ◽  
Drug Loading ◽  
Polymer Coatings ◽  
Drug Delivery Carrier ◽  
Great Solution ◽  
Selection Of

Mesoporous silica nanoparticles (MSNs) find tremendous applications in drug delivery due to several advantages such as their easy fabrication process, high drug loading, biodegradability, biocompatibility, and so forth. Nevertheless, despite several advantages, the use of this striking drug delivery carrier is restricted due to premature drug release owing to the porous structure. Coating of the pores using polymers has emerged as a great solution to this problem. Polymer coatings, which act as gatekeepers, avoid the premature release of loaded content from MSNs and offers the opportunity for controlled and targeted drug delivery. Therefore, in this review, we have compiled the polymer-based coating approaches used in recent years for improving the drug delivery capability of MSNs. This manuscript provides an insight into the research about the potential of polymer-coated MSNs, allowing the selection of right polymer for coating purposes according to the desired application.

Fabrication of Chitosan-coated Mesoporous Silica Nanoparticles Bearing Rosuvastatin as Drug Delivery System

2021 ◽  
Vol 18 ◽  
Author(s):  
Mojdeh Rahnama Ghahfarokhi ◽  
Ghasem Dini ◽  
Behrooz Movahedi
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Mesoporous Silica ◽  
Specific Surface ◽  
Silica Nanoparticles ◽  
Surface Area ◽  
Specific Surface Area ◽  
Ph Value ◽  
Mesoporous Silica Nanoparticles ◽  
Molar Ratio

Aim: In this work, to improve the solubility and bioavailability of the rosuvastatin (RSV) drug, chitosan-coated mesoporous silica nanoparticles (CS-MSNs) as drug delivery systems were fabricated. Methods: To do this, first MSNs with a maximum specific surface area were synthesized from sodium silicate as silica source and different molar ratios of cethyl trimethylammonium bromide (CTAB) and pluronics (P123, PEO20PPO17PEO20) as surfactants via the sol-gel process. Then, the synthesized MSNs were coated by CS polymer with the help of (3-glycidoxypropyl)methyldiethoxysilane (GPTMS) as a linker between MSNs and CS. Subsequently, the RSV drug was loaded into the synthesized CS-coated MSNs. The products were characterized by different techniques, including X-ray diffraction (XRD), the Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), dynamic light scattering (DLS), and Fourier-transform infrared spectroscopy (FTIR). The in vitro drug release profile of the fabricated DDS was evaluated in a typical phosphate-buffered saline (PBS) solution at different pH values (i.e., 4, 6, and 7.4) for 48 h. To assess the cytotoxicity, the viability of the human fibroblast cells exposed to the fabricated DDS was also examined. Results: The results showed that at an optimal molar ratio of P123/CTAB, the amorphous MSNs with a specific surface area of about 1080 m2/g, a pore diameter of 4 nm, a pore volume of 1.1 cm3/g, and an average size of about 30 nm were synthesized. Also, the presence of all the components, including the CS coating and the RSV drug, was confirmed in the structure of the fabricated DDS by FTIR analysis. Due to the pH-responsive feature of the CS coating, the RSV drug release from the fabricated DDS showed a reasonable environmental response; as the pH value of the PBS solution decreased, the degree of drug release increased. Conclusion: The CS coating enhanced the cytotoxicity of the fabricated DDS and led to sustainable drug release behavior, which would provide a beneficial approach for drug delivery technology.

scholarly journals Polymeric Mesoporous Silica Nanoparticles for Combination Drug Delivery In vitro

2020 ◽  
Vol 11 (4) ◽  
pp. 11905-11919
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Mesoporous Silica ◽  
Anticancer Activity ◽  
Silica Nanoparticles ◽  
Mesoporous Silica Nanoparticles ◽  
Drug Formulation ◽  
Combination Drug ◽  
Dual Drug

Despite the recent advances and development of conventional cancer therapy strategies, treatments often lack specificity, resulting in low therapeutic efficiency, cancer recurrence, and drug resistance. With the advent of nanotechnology, nanoparticle-based delivery systems have steadily gained interest. The key to using any drug delivery system is its’ relative cytotoxicity, pharmacokinetics, and downstream immunological effects that may arise upon repetitive exposure. Among the nanoparticle systems, mesoporous silica nanoparticles (MSNs) have received favorable attention as potential drug delivery platforms. This study aimed to synthesize and functionalized MSNs with chitosan and polyethyleneglycol for improved stability, efficient drug loading, and drug release. These polymerized MSNs were physicochemically and morphologically characterized and assessed for their dual-drug [doxorubicin (DOX)/5-fluoruracil (5-FU)] loading, drug release kinetics, and anticancer activity in vitro. MSNs ranged from 35-70 nm in size, with a high surface area (809.44 m²/g) and a large pore volume (1.74 cm²/g). The DOX/5-FU co-loading produced a potent dual-drug formulation with good pH-responsive release profiles, high percentage release, especially from PEGylated MSNs, and significant anticancer activity the breast adenocarcinoma (MCF-7) and cervical cancer (HeLa) cells. This combination therapy's favorable outcomes suggest an improved therapeutic strategy that warrants investigation in an in vivo model.

Preparation of Mesoporous Silica Nanoparticles for Insulin Drug Delivery

2013 ◽  
Vol 829 ◽  
pp. 251-257 ◽  
Author(s):  
Abdollah Zakeri Siavashani ◽  
Masoume Haghbin Nazarpak ◽  
Fateme Fayyaz Bakhsh ◽  
Tayebeh Toliyat ◽  
Mehran Solati-Hashjin
Keyword(s):  
Drug Delivery ◽  
Mesoporous Silica ◽  
Silica Nanoparticles ◽  
Size Distribution ◽  
Mesoporous Silica Nanoparticles ◽  
Drug Carrier ◽  
Drug Loading ◽  
Hydrothermal Process ◽  
Analytical Techniques

This study has focused on mesoporous silica nanoparticles as a drug delivery system of insulin, which was synthesized via a hydrothermal process. The morphology and composition of the silica nanoparticles were characterized by different analytical techniques such as Scanning Electron Microscope (SEM), X-Ray Diffraction Analysis (XRD), Fourier Transform Infrared spectroscopy (FTIR) and BrunauerEmmettTeller (BET). The percentage of drug loading and the in vitro drug release properties of the mesoporous silica nanoparticles in gastrointestinal tract were investigated in simulated gastrointestinal conditions by ultraviolet-visible spectroscopy. The results showed the amorphous structure of SBA-15 in mesoporous silica particles has a narrow pore size distribution. Also, particles shape was nearly wheat-like with almost homogeneous size distribution. Furthermore, it was revealed that the mesoporous silica nanoparticles have a high insulin loading and release capacity. These prominent behaviors make mesoporous silica nanoparticles promising material as a drug carrier for insulin delivery.

scholarly journals Optimization of Synthesis Parameters of Mesoporous Silica Nanoparticles Based on Ionic Liquid by Experimental Design and Its Application as a Drug Delivery Agent

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Eleen Dayana Mohamed Isa ◽  
Haslina Ahmad ◽  
Mohd Basyaruddin Abdul Rahman
Keyword(s):  
Drug Delivery ◽  
Ionic Liquid ◽  
Mesoporous Silica ◽  
Silica Nanoparticles ◽  
Surface Area ◽  
Mesoporous Silica Nanoparticles ◽  
Drug Loading ◽  
Optimization Method ◽  
Main Effects ◽  
Quadratic Models

Optimization is a process utilized to discover the best condition to generate the best possible outcome. One of the common optimization method used in the field of chemistry is response surface methodology (RSM). This method consists of mathematical and statistical techniques which relate the responses with the variables of interest. There are many experimental designs in RSM, and one of the most common one is the Box-Behnken design (BBD). In this work, BBD was employed to analyze the main effects and interactions of the reaction temperature, amount of template, and amount of triethanolamine (TEA) on the two responses which are the surface area (SA) and particle size (PS) of ionic liquid templated mesoporous silica nanoparticles (MSNs). It was found that the SA and PS were fitted with linear and quadratic models, respectively. MSNs with the highest surface area (999.051 m2 g-1) was chosen for the application of drug delivery; thus, drug loading and drug release experiments were conducted. From these studies, it was found that 37% of drug (quercetin) was successfully encapsulated in MSN and, in 48 hours, 32% of the drug was released.

Sign in / Sign up

Export Citation Format

Share Document