Application of Rheological Model of Material with Microdefects and Nanodefects with Hydrogen in the Case of Cyclic Loading

2015 ◽  
Vol 651-653 ◽  
pp. 592-597 ◽  
Author(s):  
Yuri A. Yakovlev ◽  
Alexander K. Belyaev ◽  
Vladimir A. Polyanskiy
Keyword(s):  
Plastic Deformation ◽  
Stability Analysis ◽  
Rheological Model ◽  
Continuous Medium ◽  
Mechanical Characteristics ◽  
Cylindrical Specimen ◽  
Parametric Instability ◽  
System Stability ◽  
Stress And Strain ◽  
Periodic Loading

The paper deals with the example of application of the two continuum rheological model of materials with microdefects, nanodefects and solute hydrogen for calculation of stress and strain in cylindrical specimen under periodic loading. The model suggested allows one to relate the mechanical characteristics with the hydrogen concentration.The stability analysis of the system metal-hydrogen is carried out. The influence of parameters of the mechanical loading, hydrogen concentration and parameters of sorption and desorption of hydrogen from the surface of the internal defects (traps) of various nature on the system stability is performed.It is shown that influence of hydrogen can be considered as parametric instability of a continuous medium under mechanical deformation.This can be important during forming or plastic deformation of materials and nanomaterials containing hydrogen.

Study of Evaluation Method in Terms of Structural Planes Mechanical Characteristics in Engineering Rock Mass

2013 ◽  
Vol 353-356 ◽  
pp. 384-387 ◽  
Author(s):  
Mu Dan Guo ◽  
Fu Sheng Zhu ◽  
Shu Hong Wang ◽  
Xi Jiang Mu
Keyword(s):  
Rock Mass ◽  
Stability Analysis ◽  
Efficient Method ◽  
Weight Distribution ◽  
Evaluation Method ◽  
Mechanical Characteristics ◽  
Significant Issue ◽  
Analytic Hierarchy ◽  
Intensity Parameters ◽  
Hierarchy Process

Study of mechanical characteristics of structural planes has been significant issue in engineering rock mass stability analysis. The factors that affect the mechanical behavior of structural planes are so complicated that it is quite essential to take an efficient method to quantificationally analyze these factors. Based on the basic principals of analytic hierarchy process (AHP), a structural plane classification method-CSPC method is proposed. It can conduct weight distribution in terms of the complicated factors, assess the structural planes comprehensively and also forecast the planes intensity parameters semiquantitatively. The classification and forecast parameters of structural planes appropriately fit the cases in engineering. Furthermore, the method is easy to master for the engineers and the application can be of great prospect.

In-Plane Parametric Vibrations of Curved Bellows Subjected to Oscillating Internal Fluid Pressure Excitation

2004 ◽  
Author(s):  
Masahiro Watanabe ◽  
Eiji Tachibana ◽  
Nobuyuki Kobayashi
Keyword(s):  
Stability Analysis ◽  
Natural Frequencies ◽  
Parametric Instability ◽  
Fluid Pressure ◽  
Parametric Vibrations ◽  
Internal Fluid ◽  
Mathieu’S Equation ◽  
Stability Maps ◽  
Plane Direction ◽  
Pressure Excitation

This paper deals with the theoretical stability analysis of in-plane parametric vibrations of a curved bellows subjected to periodic internal fluid pressure excitation. The curved bellows studied in this paper are fixed at both ends rigidly, and are excited by the periodic internal fluid pressure. In the theoretical stability analysis, the governing equation of the curved bellows subjected to periodic internal fluid pressure excitation is derived as a Mathieu’s equation by using finite element method (FEM). Natural frequencies of the curved bellows are examined and stability maps are presented for in-plane parametric instability. It is found that the natural frequencies of the curved bellows decrease with increasing the static internal fluid pressure and buckling occurs due to high internal fluid pressure. It is also found that two types of parametric vibrations, longitudinal and transverse vibrations, occur to the curved bellows in-plane direction due to the periodic internal fluid pressure excitation. Moreover, effects of axis curvature on the parametric instability regions are examined theoretically.

Experimental and numerical investigation of Armox 500T armor steel perforation process

2021 ◽  
Vol 70 (1) ◽  
pp. 43-61
Author(s):  
Arkadiusz Popławski
Keyword(s):  
Plastic Deformation ◽  
Strain State ◽  
Numerical Study ◽  
Stress And Strain ◽  
Failure Model ◽  
Modes Of Failure ◽  
State Of Stress ◽  
Computational Code ◽  
Armor Steel ◽  
Plate Perforation

This paper presents the results of an experimental and numerical study of the perforation of Armox 500T armoured steel. The plate perforation was performed with a pneumatic gun using three types of penetrators. Sharp, spherical and blunt penetrators were used. The use of different geometries of penetrators causes the process of perforation and destruction of plates in a different state of stress and strain, which leads to the appearance of three basic modes of failure. Numerical analyses of the perforation process have been carried out using the Ls-Dyna computational code with an advanced constitutive model of the material and the integrated failure model. The obtained experimental and numerical results were analysed and compared. The failure shape, the level of plastic deformation and the parameters of stress and strain state were analysed.

The Mechanical Characteristics and Sealing Performance Evaluation of Bolted Pipe Flange Connections With Metallic Flat Gaskets Subjected to Internal Pressure

2016 ◽  
Author(s):  
Koji Kondo ◽  
Koji Sato ◽  
Satomi Takahashi ◽  
Toshiyuki Sawa
Keyword(s):  
Plastic Deformation ◽  
Mechanical Characteristics ◽  
Experimental Results ◽  
Leak Rate ◽  
Effect Of Temperature ◽  
Load Factor ◽  
Stress Distributions ◽  
Bolt Preload ◽  
Sealing Performance ◽  
Higher Temperature

Bolted pipe flange connections with metallic gaskets have been used under higher pressure as well as higher temperature. However, a few researches on the mechanical characteristics in connections with metallic gaskets have been carried out. It is necessary to examine the mechanical characteristics such as the contact gasket stress distributions which govern the sealing performance, the deformation of the metallic gaskets, changes in axial bolt forces and the hub stress under higher pressure and temperature. In the present paper, the objectives are to examine the changes in axial bolt forces, the hub stress and the contact gasket stress distributions and the sealing performance of the pipe flange connections with metallic flat gaskets. Firstly, the mechanical characteristics of the connections under higher pressure are analyzed using FEA. Then, experiments were carried out to measure the load factor, the hub stress and the leak rate (the sealing performance). The relationship between the average contact gasket stress and the leak rate was measured using platen device at room temperature. The FEA results are fairly coincided with the experimental results. It is shown that the leak rate decreases as the contact gasket stress increases and when the plastic deformation of gaskets occurs, the sealing performance increases. The leak rate was measured in the range of 10−4∼10−7 [Pa·m3/s]. It is found that the sealing performance increases as the gasket width increase in the elastic deformation range while it is independent of the gasket width when the plastic deformation occurs. The effect of temperature on the mechanical characteristics of the connection is also examined. The FEA results are in a fairly good agreement with the experimental results. It is found that the sealing performance increases as the temperature increases. In addition, a method how to determine the bolt preload for increasing the sealing performance is proposed.

scholarly journals Simulation of plastic deformation and destruction in the process of chip formation

2018 ◽  
Vol 211 ◽  
pp. 17007
Author(s):  
Tanel Tärgla ◽  
Jüri Olt ◽  
Olga Liivapuu
Keyword(s):  
Plastic Deformation ◽  
Formation Process ◽  
Chip Formation ◽  
Rheological Model ◽  
Metal Cutting ◽  
Depth Of Cut ◽  
Key Factors ◽  
Local Zone ◽  
Complex Process ◽  
Relaxing Medium

Metal cutting is a complex process in which several mechanisms are at work simultaneously. The mathematical modelling allows carrying out research into the optimization of machining conditions. This work examines the simulation of chip formation during the process of cutting. The studies demonstrated that the chip formation process, taking into account the plastic deformation and destruction of metal in the local zone, is most appropriately represented by a rheological model in the form of a series connection of elasticductile- plastic relaxing medium of Ishlinskiy (reflecting the process of primary deformation of metal from the cut off layer) and the medium of Voigt with two elastic-dissipative elements (representing the process of deformation and frictions from the convergent shaving). The attained complex rheological model served as the basis for constructing a representative dynamic model for the chip formation process. The key factors that govern the chip formation have been taken into account, such as tool vibration frequency and amplitude, depth of cut, feed rate.

scholarly journals BUNDLE ADJUSTMENT-BASED STABILITY ANALYSIS METHOD WITH A CASE STUDY OF A DUAL FLUOROSCOPY IMAGING SYSTEM

2018 ◽  
Vol IV-2 ◽  
pp. 9-16 ◽  
Author(s):  
K. Al-Durgham ◽  
D. D. Lichti ◽  
I. Detchev ◽  
G. Kuntze ◽  
J. L. Ronsky
Keyword(s):  
Stability Analysis ◽  
Imaging System ◽  
Parameters Estimation ◽  
System Stability ◽  
Single Camera ◽  
Calibration Data ◽  
Analysis Method ◽  
Advantages And Disadvantages ◽  
Camera Imaging ◽  
The Stability

A fundamental task in photogrammetry is the temporal stability analysis of a camera/imaging-system’s calibration parameters. This is essential to validate the repeatability of the parameters’ estimation, to detect any behavioural changes in the camera/imaging system and to ensure precise photogrammetric products. Many stability analysis methods exist in the photogrammetric literature; each one has different methodological bases, and advantages and disadvantages. This paper presents a simple and rigorous stability analysis method that can be straightforwardly implemented for a single camera or an imaging system with multiple cameras. The basic collinearity model is used to capture differences between two calibration datasets, and to establish the stability analysis methodology. Geometric simulation is used as a tool to derive image and object space scenarios. Experiments were performed on real calibration datasets from a dual fluoroscopy (DF; X-ray-based) imaging system. The calibration data consisted of hundreds of images and thousands of image observations from six temporal points over a two-day period for a precise evaluation of the DF system stability. The stability of the DF system – for a single camera analysis – was found to be within a range of 0.01 to 0.66 mm in terms of 3D coordinates root-mean-square-error (RMSE), and 0.07 to 0.19 mm for dual cameras analysis. It is to the authors’ best knowledge that this work is the first to address the topic of DF stability analysis.

scholarly journals Theoretical and experimental method for determining elastic characteristics of nanomaterials

2019 ◽  
Vol 489 (5) ◽  
pp. 469-472
Author(s):  
V. M. Fomin ◽  
A. A. Filippov
Keyword(s):  
Mechanical Characteristics ◽  
Heterogeneous Material ◽  
Uniaxial Stress ◽  
Analytical Form ◽  
Mechanical Tests ◽  
Stress And Strain ◽  
Binder Phase ◽  
Homogeneous Materials ◽  
Silica Dioxide ◽  
Elastic Characteristics

The method allows determining the mechanical characteristic of nanoobjects was presented. A heterogeneous material consisting of a nanophase and a binder phase was considered, the mass and volume concentrations of components were given. Heterogeneous material is reduced to homogeneous by averaging methods while the mechanical characteristics will be associated with averaged ones. Assuming that the mechanical characteristics of the binder and averaged homogeneous materials are known from mechanical tests, the system of equations allow us to determine the mechanical characteristics of nanoobjects included in this heterogeneous material. It is believed that the mechanical characteristics of bonding and averaged homogeneous materials make it possible to obtain equations of equations that allow one to determine the mechanical characteristics of nano-objects present in this heterogeneous material. Classical mechanical tests were carried out, describing the uniaxial stress and strain states of materials, which made it possible to obtain an analytical form the dependences of the mechanical characteristics of nanophases depending on their size. Specific examples are given for silica dioxide nanoparticles (Aerosil and Tarkosil powders).

scholarly journals Dynamic Stability and Control of a Manipulating Unmanned Aerial Vehicle

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Yunping Liu ◽  
Xijie Huang ◽  
Yonghong Zhang ◽  
Yukang Zhou
Keyword(s):  
Stability Analysis ◽  
Lyapunov Exponent ◽  
Dynamic Stability ◽  
Unmanned Aerial Vehicle ◽  
Impedance Control ◽  
System Stability ◽  
Constructive Method ◽  
Aerial Vehicle ◽  
And Control ◽  
The Impact

This paper focuses on the dynamic stability analysis of a manipulator mounted on a quadrotor unmanned aerial vehicle, namely, a manipulating unmanned aerial vehicle (MUAV). Manipulator movements and environments interaction will extremely affect the dynamic stability of the MUAV system. So the dynamic stability analysis of the MUAV system is of paramount importance for safety and satisfactory performance. However, the applications of Lyapunov’s stability theory to the MUAV system have been extremely limited, due to the lack of a constructive method available for deriving a Lyapunov function. Thus, Lyapunov exponent method and impedance control are introduced, and the Lyapunov exponent method can establish the quantitative relationships between the manipulator movements and the dynamics stability, while impedance control can reduce the impact of environmental interaction on system stability. Numerical simulation results have demonstrated the effectiveness of the proposed method.

Tip-Over Stability Analysis for a Wheeled Mobile Manipulator

2017 ◽  
Vol 139 (5) ◽  
Author(s):  
Shuai Guo ◽  
Tao Song ◽  
Fengfeng (Jeff) Xi ◽  
Richard Phillip Mohamed
Keyword(s):  
Stability Analysis ◽  
Path Planning ◽  
Static Load ◽  
System Stability ◽  
Mobile Manipulator ◽  
Inertial Forces ◽  
Horizontal Position ◽  
Reaction Forces ◽  
Simulation Results

A method is presented for tip-over stability analysis of a wheeled mobile manipulator. A wheeled mobile manipulator may tip over resulting from its operation. In this study, first a Newton–Euler formulation is applied to formulate the manipulator’s reaction forces and moments exerted onto the mobile platform. Tip-over criterion is derived to judge the system stability. Three load and motion analyses are carried on. The first static load deals with links and payload to show the effect of the horizontal position of the system’s center of gravity (CG). The second and third are the inertial forces resulting from joint speeds and accelerations, respectively. Case study is path planning with tip-over criterion result which can make the system stable along the path. The simulation results demonstrate the effectiveness of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document