Slow Release of Urea Encapsulated by Starch PVA Matrix

2016 ◽  
Vol 707 ◽  
pp. 28-31
Author(s):  
Yip Hing Lum ◽  
Azizah Shaaban ◽  
Noraiham Mohamad ◽  
Mohd Fairuz Dimin
Keyword(s):  
Boric Acid ◽  
Polymer Matrix ◽  
Slow Release ◽  
Crosslinking Density ◽  
Swelling Ratio ◽  
Sem Images ◽  
The Matrix ◽  
Urea Release ◽  
Release Characteristic ◽  
Boric Acid Concentration

The hydrophobicity of starch/PVA blend was improved by crosslinking with boric acid. It was found that the swelling ratio of the boric acid modified starch/PVA matrix decreased as function of boric acid concentration. FTIR spectra and SEM images demonstrated that the urea had been encapsulated in polymer matrix successfully. The urea release characteristic was explained with respect to the swelling ratio and crosslinking density of polymer matrix. In addition, the matrix displayed a good barrier for controlling the release rate of urea from pellet.

Enhancing the mechanical properties of bismaleimide resin with montmorillonite modified by two intercalators (amino-terminated polyoxypropylene and octadecyl trimethyl ammonium chloride)

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yufei Chen ◽  
Hui Zhao ◽  
Yulong Liu ◽  
Hongyue CHU
Keyword(s):  
Mechanical Properties ◽  
Bisphenol A ◽  
Ammonium Chloride ◽  
Functional Materials ◽  
Crosslinking Density ◽  
Trimethyl Ammonium Chloride ◽  
Sem Images ◽  
Bismaleimide Resin ◽  
Content Type ◽  
The Matrix

Purpose Bismaleimide (BMI) is a kind of thermosetting resin and its application is usually limited by low toughness. In this paper, two kinds of reinforcement intercalator amino-terminated polyoxypropylene (POP) and octadecyl trimethyl ammonium chloride (OTAC) were designed and synthesized to toughen BMI resin and the toughening effect was compared and analyzed. The purpose of this paper is to toughen BMI resin and analyze the toughening effect of two reinforcements intercalator amino-terminated polyoxypropylene (POP) and octadecyl trimethyl ammonium chloride (OTAC). Design/methodology/approach Sodium-based montmorillonite (Na-MMT) was modified by POP and OTAC, and the ion-exchange reaction obtained organic montmorillonite (POP-MMT and OTAC-MMT). The polymer matrix (MBAE) was synthesized, in which 4,4’-diamino diphenyl methane BMI was used as the monomer and 3,3’-diallyl bisphenol A and bisphenol A diallyl ether were used as active diluents. And then, POP-MMT/MBAE and OTAC-MMT/MBAE composites were prepared using MBAE as matrix and POP-MMT or OTAC-MMT as reinforcement. The Fourier-transform infrared, X-ray diffraction and scanning electron microscope (SEM) of the filler and microstructure and mechanical properties of the composite were characterized to the better reinforcement. Findings POP-MMT and OTAC-MMT enhanced BMI-cured products’ toughness by generating microcracks in the polymer to absorb more fracture energy. Meanwhile, POP-MMT and OTAC-MMT were the main stress components and the enhancement of the interface interaction was beneficial to transfer the external force from the matrix to the reinforcement and improved the mechanical properties of the composite. Furthermore, with the intercalation rate increasing, the compatibility of the two phases was increased and the performance of MBAE was also elevated. Research limitations/implications BMI is generally used as aerospace structural materials, functional materials, impregnating paint and other fields. However, high crosslinking density leads to moulding material’s brittleness and limits a wider range of applications. Therefore, it has become an urgent priority to explore and improve the mechanical properties of BMI resin. Originality/value POP and OTAC have successfully intercalated Na-MMT layers to get POP-MMT and OTAC-MMT, and the interplanar crystal spacing and the intercalation rate were calculated, respectively. The results were corresponding with the SEM images of POP-MMT and OTAC-MMT. After that, the morphology of composites illustrated the compatibility was related to the intercalation rate. According to the mechanism of modified MMT toughening epoxy resin, when they were dispersed uniformly in the matrix, the composite’s mechanical properties had been significantly improved. Additionally, OTAC-MMT with a higher intercalation rate had better compatibility and interfacial force with the matrix, so that the mechanical properties of OTAC-MMT/MBAE were the best.

Boric acid modified starch polyvinyl alcohol matrix for slow release fertilizer

e-Polymers ◽  
2016 ◽  
Vol 16 (2) ◽  
pp. 151-158 ◽  
Author(s):  
Yip-Hing Lum ◽  
Azizah Shaaban ◽  
Noraiham Mohamad ◽  
Fairuz Dimin ◽  
Norazlina Mohamad Yatim
Keyword(s):  
Reaction Time ◽  
Polyvinyl Alcohol ◽  
Boric Acid ◽  
Dissolution Rate ◽  
Slow Release ◽  
Heating Temperature ◽  
Nitrogen Efficiency ◽  
Ammonium Ion ◽  
Swelling Ratio ◽  
Crushing Strength

AbstractThe slow release urea fertilizer was prepared by the boric acid crosslinked starch/polyvinyl alcohol (SPB) matrix as biodegradable carrier material. Using a two level factorial design of experiment, a comprehensive understanding of the concentration of boric acid, reaction time and heating temperature in the preparation of SPB matrix was obtained. The swelling ratio, release profile of urea in water, and crushing strength were selected as the response. The interaction between the variables and response was analyzed using the ANOVA model. The system was confirmed using the constant determination, R2 with values above 0.99. The high concentration of boric acid with a prolonged reaction time at high temperature gave relative good results of swelling ratio, dissolution rate of urea and crushing strength. In the 28-day soil incubation experiment, the retention of exchangeable ammonium ion ${\rm{(NH}}_4^ + )$ was significant higher in SPB urea as compared to pure urea. There was a potential for SPB matrix to improve nitrogen efficiency by increasing the accumulation of exchangeable ${\rm{NH}}_4^ + $ and decreasing the dissolution rate of urea in the flooded condition.

scholarly journals Investigating the Effect of Zn Ferrite Nanoparticles on the Thermomechanical, Dielectric and Magnetic Properties of Polymer Nanocomposites

Materials ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3015 ◽  
Author(s):  
Aikaterini Sanida ◽  
Sotirios G. Stavropoulos ◽  
Thanassis Speliotis ◽  
Georgios C. Psarras
Keyword(s):  
Magnetic Properties ◽  
Polymer Matrix ◽  
Quantum Interference ◽  
Zinc Ferrite ◽  
Interfacial Polarization ◽  
Ferrite Nanoparticles ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Zn Ferrite ◽  
The Matrix

In this study nanocomposites consisting of an epoxy resin and ceramic zinc ferrite nanoparticles have been successfully developed and investigated morphologically and structurally by means of scanning electron microscopy (SEM) images and X-ray diffraction (XRD) spectra. The thermal properties of the nanocomposites were studied via differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The thermomechanical characterization of the fabricated nanocomposites was studied via dynamic mechanical analysis (DMA) and the magneto-dielectric response was assessed by means of a broadband dielectric spectroscopy (BDS) and by employing a superconducting quantum interference device (SQUID) magnetometer. Data analysis demonstrates that the incorporation of nanoinclusions into the matrix improves both the thermomechanical and the dielectric properties of the systems, as indicated by the increase of the storage modulus, the real part of dielectric permittivity and conductivity values with filler content, while at the same time induces magnetic properties into the matrix. Zinc ferrite nanoparticles and their respective nanocomposites exhibit superparamagnetic behavior at room temperature. Three relaxations were recorded in the dielectric spectra of all systems; originating from the filler and the polymer matrix, namely interfacial polarization, glass to rubber transition of the polymer matrix and the reorientation of small polar side groups of the polymer chain.

Effect of graphene nano-platelets on mechanical and impact characteristics of carbon/Kevlar reinforced epoxy hybrid nanocomposites

2021 ◽  
pp. 095440622110168
Author(s):  
Mohamad Alsaadi ◽  
Bashar Younus ◽  
Ahmet Erklig ◽  
Mehmet Bulut ◽  
Omer Bozkurt ◽  
...  
Keyword(s):  
Impact Test ◽  
Charpy Impact ◽  
Hybrid Nanocomposites ◽  
Matrix Composites ◽  
Sem Images ◽  
The Matrix ◽  
Impact Characteristics ◽  
Positive Effect ◽  
Hybrid Carbon ◽  
Composite Samples

The influence of various graphene nano-platelets (GNPs) content on the tensile, flexural and Charpy impact characteristics of carbon, Kevlar and hybrid carbon/Kevlar fibers reinforced epoxy matrix composites was investigated. Both of composite configurations as carbon and Kevlar at outer and core skins were experimentally tested. The SEM images for flexural specimens were taken to observe the adhesion mechanism of GnPs particles with fiber/epoxy system. It is found that hybridization with Kevlar layers is contributed a positive effect on the hybrid carbon/Kevlar laminate structures in terms of tensile, flexural and impact behaviour. The incorporation of GnPs particles in hybrid and non-hybrid composite samples results in significant improvements in tensile, flexural and impact properties, and the greatest improvement occurs within the GnPs particle content of 0.1 and 0.25 wt%, indicating that the interfacial bonding between the matrix and the fibers is better due to the large surface area of the GnPs and the good entanglement between the GnPs layers and the matrix chains. The samples of impact test are experimented for edgewise and flatwise directions.

scholarly journals A mechanism for fire retardancy realized by a combination of biofillers and ammonium polyphosphate in various polymer systems

Cellulose ◽  
2021 ◽  
Author(s):  
Koki Matsumoto ◽  
Tatsuya Tanaka ◽  
Masahiro Sasada ◽  
Noriyuki Sano ◽  
Kenta Masuyama
Keyword(s):  
Polymer Matrix ◽  
Synergetic Effect ◽  
Polymer System ◽  
Ammonium Polyphosphate ◽  
Fire Retardancy ◽  
Polymer Systems ◽  
Thermal Decomposition Behavior ◽  
Burning Behavior ◽  
The Matrix ◽  
Decomposition Behavior

AbstractThis study focused on realizing fire retardancy for polymer composites by using a cellulosic biofiller and ammonium polyphosphate (APP). The motivation of this study was based on revealing the mechanism of the synergetic effect of a cellulosic biofiller and APP and determining the parameters required for achieving a V-0 rating in UL94 standard regardless of the kind of polymer system used. As for the polymer matrix, polypropylene and polylactic acid were used. The flammability, burning behavior and thermal decomposition behavior of the composites were investigated through a burning test according to the UL-94 standard, cone calorimetric test and thermogravimetric analysis. As a result, the incorporation of a high amount of cellulose enabled a V-0 rating to be achieved with only a small amount of APP despite the variation of the optimum cellulose loading between the matrix polymers. Through analysis, the results indicated that APP decreased the dehydration temperature of cellulose. Furthermore, APP promoted the generation of enough water as a nonflammable gas and formed enough char until the degradation of the polymer matrix was complete. The conditions required to achieve the V-0 rating were suggested against composites incorporating APP and biofillers. Furthermore, the suggested conditions were validated by using polyoxymethylene as a highly flammable polymer.

scholarly journals Kinetics of slow release of nitrogen fertiliser from multi-layered nanofibrous structures

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Leila Javazmi ◽  
Anthony Young ◽  
Gavin J. Ash ◽  
Tobias Low
Keyword(s):  
Crop Production ◽  
Slow Release ◽  
New Technology ◽  
Single Layer ◽  
Middle Layer ◽  
Modern Agriculture ◽  
Triple Layer ◽  
Urea Release ◽  
Electrospun Nanofibres ◽  
Kinetics Of

AbstractFertilisers are essential in modern agriculture to enhance plant growth, crop production and product quality. Recent research has focused on the development of delivery systems designed to prolong fertiliser release. This study introduces a new technology to encapsulate and release molecules of fertilisers by using multi-layered electrospun nanofibre as a carrier. Single-layer poly L-lactic acid (PLLA) nanofibres loaded with urea were fabricated using electrospinning. Triple-layer nanofibrous structures were produced by electrospinning polyhydroxybutyrate (PHB) nanofibres as external layers with PLLA nanofibres impregnated with urea fertiliser as the middle layer. Scanning electron microscopy (SEM) and Fourier transform infrared spectrophotometry (FTIR) were employed to characterize the morphology of electrospun nanofibres. Urea release dynamic was analysed using a total nitrogen instrument (TNM-1). The results indicated that triple-layered urea-impregnated nanofibrous structures led to lower initial rate of nitrogen release and slower release rate of cumulative nitrogen which extended for more than three months. It is concluded that triple-layer nanofibrous structures have the potential for slow release delivery of fertilisers.

scholarly journals Comparison of the Dielectric Properties of Ecoflex® with L,D-Poly(Lactic Acid) or Polycaprolactone in the Presence of SWCN or 5CB

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1719
Author(s):  
Patryk Fryń ◽  
Sebastian Lalik ◽  
Natalia Górska ◽  
Agnieszka Iwan ◽  
Monika Marzec
Keyword(s):  
Oleic Acid ◽  
Dielectric Properties ◽  
Polymer Matrix ◽  
Liquid Crystalline ◽  
Weight Ratio ◽  
Poly Lactic Acid ◽  
Relaxation Processes ◽  
The Matrix ◽  
Walled Carbon Nanotubes ◽  
Hybrid Layers

The main goal of this paper was to study the dielectric properties of hybrid binary and ternary composites based on biodegradable polymer Ecoflex®, single walled carbon nanotubes (SWCN), and liquid crystalline 4′-pentyl-4-biphenylcarbonitrile (5CB) compound. The obtained results were compared with other created analogically to Ecoflex®, hybrid layers based on biodegradable polymers such as L,D-polylactide (L,D-PLA) and polycaprolactone (PCL). Frequency domain dielectric spectroscopy (FDDS) results were analyzed taking into consideration the amount of SWCN, frequency, and temperature. For pure Ecoflex®, two relaxation processes (α and β) were identified. It was shown that the SWCN admixture (in the weight ratio 10:0.01) did not change the properties of the Ecoflex® layer, while in the case of PCL and L,D-PLA, the layers became conductive. The dielectric constant increased with an increase in the content of SWCN in the Ecoflex® matrix and the conductive behavior was not visible, even for the greatest concentration (10:0.06 weight ratio). In the case of the Ecoflex® polymer matrix, the conduction relaxation process at a frequency ca. several kilohertz appeared and became stronger with an increase in the SWCN admixture in the matrix. Addition of oleic acid to the polymer matrix had a smaller effect on the increase in the dielectric response than the addition of liquid crystal 5CB. Fourier transform infrared (FTIR) results revealed that the molecular structure and chemical character of the Ecoflex® and PCL matrixes remained unchanged upon the addition of SWCN or 5CB in a weight ratio of 10:0.01 and 10:1, respectively, while molecular interactions appeared between L,D-PLA and 5CB. Moreover, adding oleic acid to pure Ecoflex® as well as the binary and ternary hybrid layers with SWCN and/or 5CB in a weight ratio of Ecoflex®:oleic acid equal to 10:0.3 did not have an influence on the chemical bonding of these materials.

scholarly journals Characterization of continuous Hibiscus sabdariffa fibre reinforced epoxy composites

2022 ◽  
Vol 30 ◽  
pp. 096739112110609
Author(s):  
Atik Mubarak Kazi ◽  
Ramasastry DVA
Keyword(s):  
Fibre Orientation ◽  
Stress Transfer ◽  
Dynamic Mechanical Properties ◽  
Epoxy Composites ◽  
Neat Epoxy ◽  
Hibiscus Sabdariffa ◽  
Sem Images ◽  
Fibre Composites ◽  
The Matrix

The influence of fibre orientation on physical, mechanical and dynamic mechanical properties of Hibiscus sabdariffa fibre composites has been studied. The composites with longitudinal (0°), transverse (90°) and inclined (45°) fibre orientation were prepared using the hand layup technique. ASTM standards were used for characterization of continuous Hibiscus sabdariffa fibre composites. The composite with longitudinally placed fibres yields improved mechanical characteristics. The addition of longitudinal (0°) oriented continuous Hibiscus sabdariffa fibres to the epoxy enhances tensile strength by 460%, flexural strength by 160% and impact strength by 603% compared to neat epoxy. The longitudinal (0°) fibre oriented composite offers higher resistance to water absorption and thickness swelling compared to other types of composites. All continuous Hibiscus sabdariffa fibre epoxy composites possess an improved storage modulus than the neat epoxy resin. The glass transition temperature of continuous Hibiscus sabdariffa fibre composites is 8%–31% lower than that of neat epoxy. Scanning electron microscopy (SEM) images confirm the existence of voids in the matrix, fibre pullout and crack propagation near the fibre bundle, which indicates the stress transfer between fibre and matrix is non-uniform.

Sign in / Sign up

Export Citation Format

Share Document