Assessment of Bottomhole Formation Zone Results for the YUS11 Development Wells at the Fainsk Oil Field with the Application of Hydrocarbon Solvents and Acid Compounds

2018 ◽  
Vol 785 ◽  
pp. 34-39
Author(s):  
Vadim Aleksandrov ◽  
Marsel Kadyrov ◽  
Andrey Ponomarev ◽  
Denis Drugov ◽  
Mikhail Zavatskij

One of the acutest problems in the oil and gas industry is the efficient development of low-permeability reservoirs in Jurassic sediments. At that, the choice of efficient technologies can be made basing on the analysis of field-geological and laboratory data, as well as the analysis of previously conducted activities with account of facies genesis of reservoir rocks in the wells, where the geotechnical activities (GTA) are realized. The research objective is the assessment of bottomhole formation zone (BFZ) results for the YUS11 development wells at the Fainsk oil field with the application of hydrocarbon solvents and acid compounds. Using detailed field-geological analysis, the data obtained after the processing of a bottomhole formation area of the development wells with the application of hydrocarbon solvents and acid compounds was assessed.

2020 ◽  
pp. 42-45
Author(s):  
J.A. Kerimov ◽  

The implementation of plastic details in various constructions enables to reduce the prime cost and labor intensity of machine and device manufacturing, decrease the weight of design and improve their quality and reliability at the same time. The studies were carried out with the aim of labor productivity increase and substitution of colored and black metals with plastic masses. For this purpose, the details with certain characteristics were selected for further implementation of developed technological process in oil-gas industry. The paper investigates the impact of cylinder and compression mold temperature on the quality parameters (shrinkage and hardness) of plastic details in oil-field equipment. The accessible boundaries of quality indicators of the details operated in the equipment of exploration, drilling and exploitation of oil and gas industry are studied in a wide range of mode parameters. The mathematic dependences between quality parameters (shrinkage and hardness) of the details on casting temperature are specified.


2021 ◽  
Author(s):  
Henry Ijomanta ◽  
Lukman Lawal ◽  
Onyekachi Ike ◽  
Raymond Olugbade ◽  
Fanen Gbuku ◽  
...  

Abstract This paper presents an overview of the implementation of a Digital Oilfield (DOF) system for the real-time management of the Oredo field in OML 111. The Oredo field is predominantly a retrograde condensate field with a few relatively small oil reservoirs. The field operating philosophy involves the dual objective of maximizing condensate production and meeting the daily contractual gas quantities which requires wells to be controlled and routed such that the dual objectives are met. An Integrated Asset Model (IAM) (or an Integrated Production System Model) was built with the objective of providing a mathematical basis for meeting the field's objective. The IAM, combined with a Model Management and version control tool, a workflow orchestration and automation engine, A robust data-management module, an advanced visualization and collaboration environment and an analytics library and engine created the Oredo Digital Oil Field (DOF). The Digital Oilfield is a real-time digital representation of a field on a computer which replicates the behavior of the field. This virtual field gives the engineer all the information required to make quick, sound and rational field management decisions with models, workflows, and intelligently filtered data within a multi-disciplinary organization of diverse capabilities and engineering skill sets. The creation of the DOF involved 4 major steps; DATA GATHERING considered as the most critical in such engineering projects as it helps to set the limits of what the model can achieve and cut expectations. ENGINEERING MODEL REVIEW, UPDATE AND BENCHMARKING; Majorly involved engineering models review and update, real-time data historian deployment etc. SYSTEM PRECONFIGURATION AND DEPLOYMENT; Developed the DOF system architecture and the engineering workflow setup. POST DEPLOYMENT REVIEW AND UPDATE; Currently ongoing till date, this involves after action reviews, updates and resolution of challenges of the DOF, capability development by the operator and optimizing the system for improved performance. The DOF system in the Oredo field has made it possible to integrate, automate and streamline the execution of field management tasks and has significantly reduced the decision-making turnaround time. Operational and field management decisions can now be made within minutes rather than weeks or months. The gains and benefits cuts across the entire production value chain from improved operational safety to operational efficiency and cost savings, real-time production surveillance, optimized production, early problem detection, improved Safety, Organizational/Cross-discipline collaboration, data Centralization and Efficiency. The DOF system did not come without its peculiar challenges observed both at the planning, execution and post evaluation stages which includes selection of an appropriate Data Gathering & acquisition system, Parts interchangeability and device integration with existing field devices, high data latency due to bandwidth, signal strength etc., damage of sensors and transmitters on wellheads during operations such as slickline & WHM activities, short battery life, maintenance, and replacement frequency etc. The challenges impacted on the project schedule and cost but created great lessons learnt and improved the DOF learning curve for the company. The Oredo Digital Oil Field represents a future of the oil and gas industry in tandem with the industry 4.0 attributes of using digital technology to drive efficiency, reduce operating expenses and apply surveillance best practices which is required for the survival of the Oil and Gas industry. The advent of the 5G technology with its attendant influence on data transmission, latency and bandwidth has the potential to drive down the cost of automated data transmission and improve the performance of data gathering further increasing the efficiency of the DOF system. Improvements in digital integration technologies, computing power, cloud computing and sensing technologies will further strengthen the future of the DOF. There is need for synergy between the engineering team, IT, and instrumentation engineers to fully manage the system to avoid failures that may arise from interface management issues. Battery life status should always be monitored to ensure continuous streaming of real field data. New set of competencies which revolves around a marriage of traditional Petro-technical skills with data analytic skills is required to further maximize benefit from the DOF system. NPDC needs to groom and encourage staff to venture into these data analytic skill pools to develop knowledge-intelligence required to maximize benefit for the Oredo Digital Oil Field and transfer this knowledge to other NPDC Asset.


Author(s):  
Sorin Alexandru Gheorghiu ◽  
Cătălin Popescu

The present economic model is intended to provide an example of how to take into consideration risks and uncertainties in the case of a field that is developed with water injection. The risks and uncertainties are related, on one hand to field operations (drilling time, delays due to drilling problems, rig failures and materials supply, electric submersible pump [ESP] installations failures with the consequences of losing the well), and on the other hand, the second set of uncertainties are related to costs (operational expenditures-OPEX and capital expenditures-CAPEX, daily drilling rig costs), prices (oil, gas, separation, and water injection preparation), production profiles, and discount factor. All the calculations are probabilistic. The authors are intending to provide a comprehensive solution for assessing the business performance of an oil field development.


Author(s):  
Nguyen Thi Duc Nguyen ◽  
Le Tran Chinh

This study aims to: (1) Summarize the criteria for selecting 3PL Provider in supply chain management from literature review and apply these criteria to build the criteria model in choosing 3PL Provider for oilfield services company X for the purpose of expanding their market in the oil and gas industry and (2) Analyze, evaluate two 3PL Providers, along with a new 3PL Provider and suggest the strategy for selecting the suitable 3PL Provider to meet the specific requirements from company X. By arranging in-depth interviews with ten people with different positions, including Operation Manager, Supply Chain Manager, Logistics Manager, Base Manager and Logistics Specialist, along with AHP approach and expert choice 11.0 software support in collecting, processing and synthesizing data to evaluate and determine the appropriate 3 PL Provider for company X. In this study, three 3PL Providers have been chosen for analyzing and evaluating – 3PL Providers A, B, and C. The final results demonstrate that there are six main criteria and 13 sub-criteria in choosing 3PL Provider for oilfield services company X. The six main criteria are Performance, Price, Services, Quality assurance, IT system and Intangible values. The results and hypothetical situations have also been presented and discussed again with the expert logistics group to get their feedback about the practicability of the built model. The expert logistics group has agreed that the built criteria model and results are appropriate and adequate for evaluating and selecting a suitable 3PL Provider from the company’s specific demands. Consequently, this study can also be applied for similar purposes in other companies and shipping agents who need to work with outsourcing logistics services in oil and gas industry by using this built criteria model and synthesis results to find out the right decision for selecting 3PL Provider.


2020 ◽  
Vol 17 (34) ◽  
pp. 892-904
Author(s):  
Zinon A KUANGALIEV ◽  
Gulsin S DOSKASIYEVA ◽  
Altynbek S MARDANOV

The main part of Russia's hard-to-recover reserves is 73% for low-grade and carbonate reservoirs, 12% for high-viscosity oil, about 15% of extensive sub-gas zones of oil and gas deposits and 7% of reservoirs lying at great depths. The development of such stocks with the usage of traditional technologies is economically inefficient. It requires the application of new technologies for their development and fundamentally new approaches to design, taking into account the features of extraction of hard-to-extract reserves (HtER). The purpose of this research is to find ways to improve the performance of low-permeability reservoirs. To accomplish this task, the Novobogatinsk South-Eastern Oil Field has been taken as an example and described. The necessary properties of production facilities in the field are highlighted, along with economic feasibility and technological efficiency. The reserves involved in the development are determined and, thanks to the knowledge of the geological oil reserves of the deposits, the potential oil recovery factor is calculated with the existing development technology. As a result of the research, development options were worked out with the results of the calculation of design indicators for the field as a whole. The comparison of oil recovery schedules and ORI, as well as the layout of wells, have been presented. As a result of the study, a description of 3 options for the development of design indicators for the field as a whole is given. The figures show oil production graphs, as well as location patterns. The authors of the study conclude which of the recommended development options can help extract maximum oil reserves.


2018 ◽  
Vol 67 ◽  
pp. 03001 ◽  
Author(s):  
Muhammad Asyri ◽  
Kamarza Mulia

The purpose of this study is to develop guideline and decision tree for selecting proper material of squeeze cementing operation as part of permanent well abandonment project in PT XYZ. The existing guideline in oil and gas industry does not cover the detail of cement type selection prior to do squeeze cementing job and this may cause failure in the operation and give the high cost impact due to remedial job. It is expected that the result of decision tree and guideline in this study can be used as a reference for plug and abandonment project in. The method used in this research is by calculating the value of the injectivity factor obtained from field study as a key factor in determining the type of cement for squeeze cementing operation. If the injector factor value is less than 2000 (<2000), it is concluded that G type cement (G class cement) is preferred to be used to isolate the reservoir formation zone. While for the injectivity factor value more than 2000 (> 2000), the reservoir is considered as tight formation and difficult to penetrate, so the use of microfine cement is expected to isolate the reservoir formation zone.


2017 ◽  
pp. 87-90
Author(s):  
P. V. Smirnov ◽  
L. V. Taranova

The paper reviews the possibilities of using of silicon opal-cristobalite rocks (diatomite and opokas) in Western Siberiain industries associated with the production and transportation of hydrocarbons, oil field construction, environmental protection in the areas of intensive technogenic influence. Also the data is summarized on the possibility of their use for the production of proppants, adsorbents, additives in cement slurries.


2020 ◽  
pp. 132-139
Author(s):  
A. A. Tolmachev ◽  
V. A. Ivanov

One of the most important criteria for ensuring the safe operation of the facility and increasing its durability is its reliability. Ensuring the safe operation of pipelines is in many ways a problem of increasing their reliability and durability and seems to be a complex task, which includes solving technical and technological, as well as economic and organizational aspects. To date, emergencies related to the rupture and damage to steel pipelines because of their operational wear and exposure to external factors are still the most frequent cause of accidents in the oil field. Despite the fact that numerous studies are devoted to this problem, at present it has not yet been completely resolved, and many questions still remain open. In this article, we are considering the prospects of using fiberglass and polymer-metal pipes in the oil and gas industry as an alternative to steel pipes. 


2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Ahmed R. AlBajalan ◽  
Hunar K. Haias

Nanomaterials have gained a wide interest in the oil and gas industry due to their immense applicability. Nanomaterials are being used to formulate a new generation of drilling mud known as Nanomud or Smart mud, where it has the ability to improve mud properties and eliminate borehole problems. Using nanoparticles as an additive agent in conventional drilling mud can lead to a more efficient drilling process in troublesome formations. In this study, several conventional water-based muds from a selected well drilled in the Kurdistan/Iraq oil field have been prepared. Then, nanodrilling muds were formulated by dispersing SiO2 and ZnO nanoparticles in concentrations ranging from 0.25 to 1 wt.% to conventional water-based mud (WBM). This study aims to evaluate and compare the performance of conventional water-based muds after adding SiO2 and ZnO nanoparticles. This evaluation was performed by carrying out a series of laboratory experiments to determine the rheological and mud filtrate properties. The results demonstrated that nanomuds improved the rheological behaviors and provided better filtration control compared to conventional drilling muds. However, there was little or no impact of the nanomaterials on the mud density for all mud systems.


2017 ◽  
Vol 57 (2) ◽  
pp. 814
Author(s):  
Ahmadreza Younessi

Analytical approaches have been successfully used for decades to analyse different geomechanical related problems in the oil and gas industry. These approaches are still applicable for most problems. However, they may not be suitable for complex environments that the industry is increasingly facing nowadays. The challenges to develop complex fields require the industry to have a better understanding and prediction of the behaviour of reservoir rocks and their overburden formations during field production. This can be partially achieved by conducting a more comprehensive analysis by means of numerical methods in a wider scale of space and time. We refer to this as 4D geomechanical modelling. The concept of 4D geomechanical modelling is relatively new in the industry, and there is limited knowledge regarding the applications and advantages of this type of modelling within disciplines other than geomechanics. It is essential to understand in which type of reservoirs and at what stage of development this type of modelling should be considered. Here in this manuscript, after discussing these considerations, the techniques and procedures to build and interpret a 4D geomechanical model are discussed.


Sign in / Sign up

Export Citation Format

Share Document