Effect of Plasma Surface Treatment on the Impact Behavior of Basalt/Epoxy Composites

2019 ◽  
Vol 813 ◽  
pp. 441-446
Author(s):  
Maria Rosaria Ricciardi ◽  
Ilaria Papa ◽  
Giuseppe Coppola ◽  
Filomena Impero ◽  
Valentina Lopresto ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Plasma Treatment ◽  
Composite Laminates ◽  
Atmospheric Oxygen ◽  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Low Velocity ◽  
Composite Surface ◽  
The Impact

In this study, the effects of surface treatment of a low-temperature atmospheric oxygen plasma on basalt/epoxy composites were investigated to improve the hydrophobility of the composite surface. After the plasma treatment, the unmodified and surface treated composite laminates have been experimentally characterized by performing contact angle measurements, low-velocity impact tests and indentation depth on the impacted laminates. Results have showed a dependence of such composite properties on the plasma coating deposition and on the treatment parameters outlining the need to optimize both the plasma power and exposition time to plasma in order to assess the efficiency of the plasma treatment and establish the optimal processing conditions.

scholarly journals Effect of Plasma Treatment on the Impact Behavior of Epoxy/Basalt Fiber-Reinforced Composites: A Preliminary Study

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1293
Author(s):  
Maria Rosaria Ricciardi ◽  
Ilaria Papa ◽  
Giuseppe Coppola ◽  
Valentina Lopresto ◽  
Lucia Sansone ◽  
...  
Keyword(s):  
Contact Angle ◽  
Surface Treatment ◽  
Plasma Treatment ◽  
Treatment Time ◽  
Basalt Fiber ◽  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Chamber Pressure ◽  
The Impact

Hydrophobic surfaces are highly desired for several applications due to their exceptional properties such as self-cleaning, anti-icing, anti-friction and others. Such surfaces can be prepared via numerous methods including plasma technology, a dry technique with low environmental impact. In this paper, the effect of a one-step sulfur hexafluoride (SF6) plasma treatment upon the low velocity impact behavior of basalt/epoxy composites has been investigated by using several characterization techniques. A capacitive coupled radiofrequency plasma system was used for the plasma surface treatment of basalt/epoxy composites, and suitable surface treatment conditions were experimentally investigated with respect to gas flow rate, chamber pressure, power intensity, and surface treatment time by measuring the water droplet contact angle of treated specimens. The contact angle measurements showed that treating with SF6 plasma would increase the hydrophobicity of basalt/epoxy composites; moreover, the impact results obtained on reinforced epoxy basalt fiber showed damage in a confined area and higher impact resistance for plasma-treated basalt systems.

Computational and Experimental Investigation of the Low Velocity Impact Behavior of Nano Engineered E-Glass Fiber Reinforced Composite Laminates

2012 ◽  
Author(s):  
Abu Rasel ◽  
Evan Kimbro ◽  
Ram Mohan ◽  
Ajit D. Kelar
Keyword(s):  
Composite Laminates ◽  
Energy Levels ◽  
Electrospun Nanofibers ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Low Velocity ◽  
Velocity Impact ◽  
Glass Fiber Reinforced ◽  
Impact Energies ◽  
The Impact

This paper presents computational and experimental investigation of the low velocity impact behavior of nano engineered E-glass fiber reinforced composite laminates. The Tetra Ethyl Orthosilicate (TEOS) chemically engineered glass nanofibers were manufactured using electrospinning technique and were investigated for their potential to improve the interlaminar properties. Plain weave fiberglass prepregs were used for manufacturing ten ply thick laminates. For production of the laminates with electrospinning interface layers the addition of the electrospinning sheets and an additional layer of resin film was used. The fabricated laminates were subjected to low velocity impacts of various energy levels to study the progressive damage and deformation mechanics of fiberglass laminates with and without electrospun nanofibers. The low velocity impact behavior was modeled using the transient dynamic finite element program LSDYNA. It was observed that the simulations results are in good agreement with the experimental results for lower impact energies. In addition, the simulated maximum impact force is smaller than the experimental value (soft response) at each drop height and at higher energy levels, the area under impact force vs time increases when electrospun nanofibers are used in the laminates. The study indicates that, the impact duration increases when electrospun nanofibers are used. Impact duration increases due to an additional damage accumulations in electrospun nanofibers layers. Both computational and experimental investigations clearly indicate that inserting interlaminar electrospun nanofiber layers improves the impact resistance of composites by absorbing additional impact energies.

Experimental Investigation of Impacted and Non-Impacted Composite Laminates under Compressive Loading

2011 ◽  
Vol 284-286 ◽  
pp. 607-610
Author(s):  
Jiang Tao Ruan ◽  
Min Shen ◽  
Jing Wei Tong ◽  
Shi Bin Wang ◽  
Francesco Aymerich ◽  
...  
Keyword(s):  
Composite Laminates ◽  
Optical Measurement ◽  
Speckle Pattern ◽  
Compressive Loading ◽  
Laminated Plates ◽  
Low Velocity Impact ◽  
Compressive Deformation ◽  
Electronic Speckle Pattern Interferometry ◽  
Low Velocity ◽  
The Impact

In this paper, the deformation measurements of impacted and non-impacted composite laminates under compressive loading are taken. [03/903]S orientated cross-ply laminated plates with impact delamination and without delamination are tested using an anti-buckling testing device in compression experiment. The delamination is induced by low-velocity impact test at the impact energy level of 3.105J. For both impacted and non-impacted specimens, the compressive deformation is measured by a carrier electronic speckle pattern interferometry (CESPI) optical measurement technique. It is found that the deformation behavior of the two specimens presents a mixed deformation mode. However, the delamination has significant effect on the compressive deformation of composite laminates.

Compressive Strength of CCF300/QY8911 Composite Laminates with LVI Damage

2012 ◽  
Vol 583 ◽  
pp. 203-206
Author(s):  
Hai Ming Hong ◽  
Ming Li ◽  
Jian Yu Zhang ◽  
Yi Ning Zhang
Keyword(s):  
Compressive Strength ◽  
Impact Energy ◽  
Composite Laminates ◽  
Inflection Point ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Damage Area ◽  
Compressive Performance ◽  
The Impact ◽  
Dent Depth

A series of low-velocity impact tests and residual compressive strength tests after impacts on CCF300/QY8911 composite materials were carried out to study the mechanism of compression failure of the laminates after low-velocity impact. The curves of impact energy verse dent depth and impact energy verse the damage area was obtained. And the residual compressive strength and stiffness after impact verse damage parameters were analyzed. The results showed that when the impact energy exceeded the inflection point, as the impact energy increased, the dent depth on the impacted surface of the laminates notably increased while the damage area of the internal layers merely increased slowly. If the impact energy was continued to increase, the expansion of the laminates' internal damage mainly consisted of fiber breaks. The main reason for the decrease in compressive performance of composite laminates was inside delamination between layers, while in the case in which impact energy exceeded the inflection point, there were no obvious changes in delamination damage area for different energy, so the residual compressive performance kept almost stable.

Fatigue Behavior of Impacted Plain-Weave Glass/Epoxy Composites under Tensile Fatigue Loading

2005 ◽  
Vol 297-300 ◽  
pp. 1291-1296 ◽  
Author(s):  
Ki Weon Kang ◽  
Jung Kyu Kim ◽  
Heung Seob Kim
Keyword(s):  
Fatigue Life ◽  
Impact Damage ◽  
Fatigue Behavior ◽  
Fatigue Loading ◽  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Damage Behavior ◽  
Plain Weave ◽  
The Impact

The goals of this paper are to identify the impact damage behavior of plain-weave E-glass/epoxy composites and predict the fatigue life of the composites with impact-induced damage under constant amplitude loading. To identify these behaviors, the low velocity impact and fatigue after impact tests are performed for glass/epoxy composites having two types of fiber orientations. The impact damage behavior is dependent on the fiber orientation of the composites. The fatigue life of the impacted composites can be identified through the prediction model, which was proposed on the carbon/epoxy laminates by authors regardless of fiber orientations.

scholarly journals Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres

2019 ◽  
Vol 176 ◽  
pp. 107191 ◽  
Author(s):  
Dongdong Chen ◽  
Quantian Luo ◽  
Maozhou Meng ◽  
Qing Li ◽  
Guangyong Sun
Keyword(s):  
Hybrid Composite ◽  
Composite Laminates ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Low Velocity ◽  
Velocity Impact

scholarly journals Static Residual Tensile Strength Response of GFRP Composite Laminates Subjected to Low-Velocity Impact

2020 ◽  
Vol 10 (16) ◽  
pp. 5480
Author(s):  
Jong-Il Kim ◽  
Yong-Hak Huh ◽  
Yong-Hwan Kim
Keyword(s):  
Tensile Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Image Correlation ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Stress Concentrations ◽  
Low Velocity ◽  
Full Field ◽  
The Impact

The dependency of the static residual tensile strength for the Glass Fiber-Reinforced Plastic (GFRP) laminates after impact on the impact energy level and indent shape is investigated. In this study, two different laminates, unidirectional, [0°2]s) and TRI (tri-axial, (±45°/0°)2]s), were prepared using the vacuum infusion method, and an impact indent on the respective laminates was created at different energy levels with pyramidal and hemispherical impactors. Impact damage patterns, such as matrix cracking, delamination, debonding and fiber breakage, could be observed on the GFRP laminates by a scanning electron microscope (SEM), and it is found that those were dependent on the impactor head shape and laminate structure. Residual in-plane tensile strength of the impacted laminates was measured and the reduction of the strength is found to be dependent upon the impact damage patterns. Furthermore, in this study, stress concentrations in the vicinity of the indents were determined from full-field stress distribution obtained by three-dimensional Digital Image Correlation (3D DIC) measurement. It was found that the stress concentration was associated with the reduction of the residual strength for the GFRP laminates.

A Study on Low Velocity Impact of Woven Glass/Phenolic Composite Laminates Considering Environmental Effects

2005 ◽  
Vol 297-300 ◽  
pp. 1303-1308 ◽  
Author(s):  
Jae Hoon Kim ◽  
Duck Hoi Kim ◽  
Hu Shik Kim ◽  
Byoung Jun Park
Keyword(s):  
Compressive Strength ◽  
Environmental Effects ◽  
Impact Loading ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Internal Damage ◽  
The Impact ◽  
Phenolic Composite

The objectives of this study are to evaluate the internal damage and compressive residual strength of composite laminate by impact loading. To investigate the environmental effects, as-received and accelerated-aged glass/phenolic laminates are used. UT C-Scan is used to determine the impact damage characteristics and CAI tests are carried out to evaluate quantitatively the reduction of compressive strength by impact loading. The damage modes of the woven glass/phenolic laminates are evaluated. In the case of the accelerated-aged laminates, as aging time increases, initial failure energy and residual compressive strength decrease.

Sign in / Sign up

Export Citation Format

Share Document