The Method of Creating and Measuring the Printability of Fine-Grained Concrete

2021 ◽  
Vol 1017 ◽  
pp. 71-80
Author(s):  
Valery S. Lesovik ◽  
Evgeny S. Glagolev ◽  
Michail Yu. Elistratkin ◽  
Marina A. Pospelova ◽  
Natalia I. Alfimova
Keyword(s):  
Low Cost ◽  
Extrusion Process ◽  
Structural Features ◽  
Fine Aggregate ◽  
Standard Equipment ◽  
Foaming Agents ◽  
Fine Grained ◽  
Scale Levels ◽  
Technological Index ◽  
Numerical Indicator

One of the factors hindering the normal development of additive construction technologies is the lack of reasonable methods for evaluating the suitability of mixtures for printing. This makes it almost impossible to compare remotely the compositions of different developers, makes it difficult to develop equipment and regulatory documentation, without which it is impossible to complete industrial production. The paper considers the feasibility of introducing the concept of “printability” of compositions and “rheological technological index of mixtures” as a numerical indicator for its evaluation. The design of the device for determining the rheological technological index is described. The developed device has a low cost of production, is linked to standard equipment of construction laboratories and emulates the main types of effects on the mixture during the extrusion process. The effective method for ensuring the printability of fine-grained concretes is considered based on the joint use of traditional plasticizing additives with entrained agents – foaming agents for cellular concretes. The effect of these additives is realized at different scale levels (micro-and mesolevels (cement paste) – traditional superplasticizers; macro-level (fine aggregate) - entrained agents), which together provides high rheological technological indices and effectiveness of mixtures with increased amounts of sand, low W/C ratios and small dosages of these additives. The use of additional mineral or organic rheology modifiers that increase the cost of the mixture is not required in this case. The structural features and basic properties of the developed composites are studied, allowing making comparisons with the solutions of other developers, assessing the prospects of the proposed method of ensuring printability, and outlining directions for its further improvement.

scholarly journals A Machine Vision Approach for Bioreactor Foam Sensing

2021 ◽  
pp. 247263032110088
Author(s):  
Jonas Austerjost ◽  
Robert Söldner ◽  
Christoffer Edlund ◽  
Johan Trygg ◽  
David Pollard ◽  
...  
Keyword(s):  
Machine Learning ◽  
Machine Vision ◽  
State Of The Art ◽  
Low Cost ◽  
High Accuracy ◽  
Consumer Electronics ◽  
Learning System ◽  
Automotive Applications ◽  
Fine Grained

Machine vision is a powerful technology that has become increasingly popular and accurate during the last decade due to rapid advances in the field of machine learning. The majority of machine vision applications are currently found in consumer electronics, automotive applications, and quality control, yet the potential for bioprocessing applications is tremendous. For instance, detecting and controlling foam emergence is important for all upstream bioprocesses, but the lack of robust foam sensing often leads to batch failures from foam-outs or overaddition of antifoam agents. Here, we report a new low-cost, flexible, and reliable foam sensor concept for bioreactor applications. The concept applies convolutional neural networks (CNNs), a state-of-the-art machine learning system for image processing. The implemented method shows high accuracy for both binary foam detection (foam/no foam) and fine-grained classification of foam levels.

2D organic-inorganic hybrid perovskite materials for nonlinear optics

Nanophotonics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 1787-1810 ◽  
Author(s):  
Xiao Han ◽  
Yongshen Zheng ◽  
Siqian Chai ◽  
Songhua Chen ◽  
Jialiang Xu
Keyword(s):  
Nonlinear Optical ◽  
Second Harmonic ◽  
Low Cost ◽  
Laser Pulses ◽  
Structural Features ◽  
Photon Absorption ◽  
Saturable Absorption ◽  
Research Attention ◽  
Inorganic Hybrid ◽  
Quantum Well Structures

AbstractTwo-dimensional (2D) organic-inorganic hybrid perovskites feature characteristics of inherent quantum-well structures and intriguing optoelectronic properties, and have therefore attracted enormous research attention for their optical applications in light emitting, sensing, modulation, and telecommunication devices. The low-cost and solution-processed fabrications as well as alternative organic spacer cations endue 2D hybrid perovskites with higher tunability in optical and photonic applications. In particular, they demonstrate distinguished nonlinear optical characters such as second-harmonic generation (SHG), two-photon absorption (2PA), and saturable absorption (SA) under the excitation of laser pulses. Here, we discuss the construction of the various sorts of 2D hybrid perovskites with different structural features. We have also highlighted some representative properties and applications of these 2D hybrid perovskites in both linear and nonlinear optical regimes.

scholarly journals The Potency of Seaweed Sulfated Polysaccharides for the Correction of Hemostasis Disorders in COVID-19

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2618
Author(s):  
Tatyana A. Kuznetsova ◽  
Boris G. Andryukov ◽  
Ilona D. Makarenkova ◽  
Tatyana S. Zaporozhets ◽  
Natalya N. Besednova ◽  
...  
Keyword(s):  
Clinical Trials ◽  
Therapeutic Potential ◽  
Low Cost ◽  
Clinical Manifestations ◽  
Optimal Dose ◽  
Monosaccharide Composition ◽  
Structural Features ◽  
Sulfated Polysaccharides ◽  
Clinical Use ◽  
Hemostasis System

Hemostasis disorders play an important role in the pathogenesis, clinical manifestations, and outcome of COVID-19. First of all, the hemostasis system suffers due to a complicated and severe course of COVID-19. A significant number of COVID-19 patients develop signs of hypercoagulability, thrombocytopenia, and hyperfibrinolysis. Patients with severe COVID-19 have a tendency toward thrombotic complications in the venous and arterial systems, which is the leading cause of death in this disease. Despite the success achieved in the treatment of SARS-CoV-2, the search for new effective anticoagulants, thrombolytics, and fibrinolytics, as well as their optimal dose strategies, continues to be relevant. The wide therapeutic potential of seaweed sulfated polysaccharides (PSs), including anticoagulant, thrombolytic, and fibrinolytic activities, opens up new possibilities for their study in experimental and clinical trials. These natural compounds can be important complementary drugs for the recovery from hemostasis disorders due to their natural origin, safety, and low cost compared to synthetic drugs. In this review, the authors analyze possible pathophysiological mechanisms involved in the hemostasis disorders observed in the pathological progression of COVID-19, and also focus the attention of researchers on seaweed PSs as potential drugs aimed to correction these disorders in COVID-19 patients. Modern literature data on the anticoagulant, antithrombotic, and fibrinolytic activities of seaweed PSs are presented, depending on their structural features (content and position of sulfate groups on the main chain of PSs, molecular weight, monosaccharide composition and type of glycosidic bonds, the degree of PS chain branching, etc.). The mechanisms of PS action on the hemostasis system and the issues of oral bioavailability of PSs, important for their clinical use as oral anticoagulant and antithrombotic agents, are considered. The combination of the anticoagulant, thrombolytic, and fibrinolytic properties, along with low toxicity and relative cheapness of production, open up prospects for the clinical use of PSs as alternative sources of new anticoagulant and antithrombotic compounds. However, further investigation and clinical trials are needed to confirm their efficacy.

Interfaces in Multiphase Polymers and Nanomedicines

2012 ◽  
Vol 714 ◽  
pp. 211-215 ◽  
Author(s):  
Gergo Patyi ◽  
Zsombor Nagy ◽  
Balazs Vajna ◽  
Peter Anna ◽  
Gyorgy Marosi
Keyword(s):  
Extrusion Process ◽  
Structural Features ◽  
Continuous Extrusion ◽  
Multiphase Composite

Crystalline and amorphous interfaces were formed and modified in multiphase composite and pharmaceutical systems. Nanosize drug of antacid effect was prepared in continuous extrusion process. The structural features were analyzed using (micro-) thermal analytical and (micro-) Raman spectrometric methods combined with chemometric evaluation.

Fast Screening for Antioxidant Properties of Flavonoids from Pterogyne nitens Using Electrochemical Methods

2012 ◽  
Vol 95 (3) ◽  
pp. 773-777 ◽  
Author(s):  
Leonardo Luiz Okumura ◽  
Luis Octávio Regasini Regasini ◽  
Daniara Cristina Fernandes ◽  
Dulce Helena Siqueira da Silva ◽  
Maria Valnice Boldrin Zanoni ◽  
...  
Keyword(s):  
Antioxidant Activities ◽  
Low Cost ◽  
Supporting Electrolyte ◽  
Antioxidant Properties ◽  
Reference Electrode ◽  
Structural Features ◽  
Quantitative Detection ◽  
Nonaqueous Media ◽  
Electrochemical Detector ◽  
Fast Screening

Abstract A fast, low-cost, convenient, and especially sensitive voltammetric screening approach for the study of the antioxidant properties of isoquercitrin and pedalitin from Pterogyne nitens is suggested in this work. These flavonoids were investigated for their redox properties using cyclic voltammetry in nonaqueous media using N,N-dimethylformamide and tetrabutylammonium tetrafluorborate as the supporting electrolyte, a glassy carbon working electrode, Ag|AgCl reference electrode, and Pt bare wire counter electrode. The comparative analysis of the activity of rutin has also been carried out. Moreover, combining HPLC with an electrochemical detector allowed qualitative and quantitative detection of micromolecules (e.g., isoquercitrin and pedalitin) that showed antioxidant activities. These results were then correlated to the inhibition of β-carotene bleaching determined by TLC autographic assay and to structural features of the flavonoids.

scholarly journals Exploiting Existing Comparators for Fine-Grained Low-Cost Error Detection

2014 ◽  
Vol 11 (3) ◽  
pp. 1-24
Author(s):  
Gulay Yalcin ◽  
Oguz Ergin ◽  
Emrah Islek ◽  
Osman Sabri Unsal ◽  
Adrian Cristal
Keyword(s):  
Error Detection ◽  
Low Cost ◽  
Fine Grained

scholarly journals Preliminary Characterization of Three Metallurgical Bauxite Residue Samples

2021 ◽  
Vol 5 (1) ◽  
pp. 66
Author(s):  
Panagiotis Angelopoulos ◽  
Maria Georgiou ◽  
Paschalis Oustadakis ◽  
Maria Taxiarchou ◽  
Hakan Karadağ ◽  
...  
Keyword(s):  
Low Cost ◽  
Bauxite Residue ◽  
Raw Material ◽  
Morphological Observation ◽  
Critical Metals ◽  
Alumina Production ◽  
Preliminary Characterization ◽  
Fine Grained ◽  
Extraction And Separation ◽  
Bulk Chemical

Bauxite Metallurgical Residue (BR) is a highly alkaline and very fine-grained by-product of the Bayer process for alumina production. Its huge global annual production has resulted in increasing accumulation of BR, causing deposition problems and serious environmental issues. RM contains oxides and salts of the main elements Fe, Al, Ca, Na, Si, Ti, and rare earths—REEs (Sc, Nd, Y, La, Ce, Ds)—many of which have been categorised by EU as critical metals (CMs). The valorisation of BR as a low-cost secondary raw material and metal resource could be a route for its reduction, introducing the waste into the economic cycle. REEScue constitutes a research project that aims to instigate the efficient exploitation of European bauxite residues, resulting from alumina production from Greece (MYTILINEOS SA), Turkey (ETI Aluminium), and Romania (ALUM SA), containing appreciable concentrations of scandium and REEs, through the development of a number of innovative extraction and separation technologies that can efficiently address the drawbacks of the existing solution. The consortium consists of three alumina producers from Greece (MYTILINEOS SA), Turkey (ETI Aluminium), and Romania (ALUM SA) and two academic partners from Greece (National Technical University of Athens) and Turkey (Necmettin Erbacan University). We present preliminary characterization results of three different BR samples that originate from the three aluminium industries, in respect of bulk chemical analysis (XRF, ICP), mineralogical investigation (XRD), and morphological observation through microscopy.

scholarly journals The Middle Cenomanian basal series of Planinica, Western Serbia

2002 ◽  
pp. 13-43 ◽  
Author(s):  
Dragoman Rabrenovic ◽  
Nebojsa Vasic ◽  
Jovanka Mitrovic-Petrovic ◽  
Vladan Radulovic ◽  
Barbara Radulovic ◽  
...  
Keyword(s):  
New Taxa ◽  
Upper Cretaceous ◽  
Sedimentary Rocks ◽  
Structural Features ◽  
Upper Miocene ◽  
Fine Grained ◽  
The Village ◽  
Marly Limestone

Sedimentary rocks of the Upper Cretaceous basal series found at the village of Planinica, Western Serbia, are composed of thick coarse clastics and beds and intercalations of medium- to fine-grained clastics. The series lies transgressively over Jurassic serpentinite and peridotite, and under Upper Miocene marlstone and marly limestone. Sedimentary, petrographic, paleontological, and biostratigraphic characteristics of the basal series are described and its lithological members and their structural features are identified. From medium-grained sandy matrix in thick coarse clastics, two ammonite taxa, four brachiopod taxa (including the new taxa Orbirhynchia oweni and "Terebratula" n. gen. et sp.), and eleven echinoid taxa are described. The brachiopod species Kingena concinna Owen is used in dating the basal series as Middle Cenomanian, whereas limestone fragments in coarse clastics correspond to the Late Albian and Early Cenomanian.

scholarly journals Crevasse splays within a lignite seam at the Tomisławice opencast mine near Konin, central Poland: architecture, sedimentology and depositional model

Geologos ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 25-37 ◽  
Author(s):  
Lilianna Chomiak
Keyword(s):  
Middle Miocene ◽  
Structural Features ◽  
Fine Grained ◽  
Opencast Mine ◽  
Main River ◽  
Main River Channel ◽  
Lignite Mine ◽  
Flooding Event ◽  
Crevasse Splay ◽  
Sandy Sediments

AbstractThe present article focuses predominantly on sandy deposits that occur within the Middle Miocene lignite seam at the Tomisławice opencast mine, owned by the Konin Lignite Mine. As a result of mining activity, these siliciclastics were available for direct observation in 2015–2016. They are situated between two lignite benches over a distance of ~500 m in the lower part and ~200 m in the higher part of the exploitation levels. The maximum thickness of these sandy sediments, of a lenticular structure in a S–N cross section, is up to 1.8 m. With the exception of a thin lignite intercalation, these siliciclastics comprise mainly by fine-grained and well-sorted sands, and only their basal and top layers are enriched with silt particles and organic matter. Based on a detailed analysis of the sediments studied (i.e., their architecture and textural-structural features), I present a discussion of their genesis and then propose a model of their formation. These siliciclastics most likely formed during at least two flood events in the overbank area of a Middle Miocene meandering or anastomosing river. Following breaching of the natural river levee, the sandy particles (derived mainly from the main river channel and levees) were deposited on the mire (backswamp) surface in the form of crevasse splays. After each flooding event, vegetation developed on the top of these siliciclastics; hence, two crevasse-splay bodies (here referred to as the older and younger) came into existence. As a result, the first Mid-Polish lignite seam at the Tomisławice opencast mine is currently divided in two by relatively thick siliciclastics, which prevents a significant portion of this seam from being used for industrial purposes.

scholarly journals AN EFFECTIVE WAY TO RECYCLE 3D PRINTING CONCRETE SCRAP

2021 ◽  
Vol 4 (2) ◽  
pp. 12-18
Author(s):  
D.A. Tolypin ◽  
N. Tolypina
Keyword(s):  
Compressive Strength ◽  
3D Printing ◽  
Portland Cement ◽  
Quartz Sand ◽  
Raw Materials ◽  
Electricity Consumption ◽  
Cement Matrix ◽  
Fine Aggregate ◽  
Fine Grained ◽  
Control Samples

the article proposes a rational method for processing 3D printing concrete scrap using vibration equipment, which allows obtaining a multicomponent building material with minimal electricity consumption. As a crite-rion for the degree of grinding of concrete scrap, it is proposed to use the specific surface area of the finely dispersed part of concrete scrap, which should correspond to 400-500 m2/kg. The possibility of reusing the resulting product instead of the traditional fine aggregate of quartz sand is shown. It was found that the con-crete scrap without the addition of Portland cement hardens, reaching up to 48% of the compressive strength of the control samples by 28 days. When 10% of the binder CEM I 42.5 N was added to the concrete scrap processing product, the compressive strength of fine-grained concrete increased by 106.6%, and 20% of Portland cement - by 112.2 %, compared to the strength of control samples of a similar composition on tra-ditional quartz sand after 28 days of hardening. It is noted that this is primarily due to the weak contact zone of quartz sand and the cement matrix of concrete. The use of the product of processing concrete scrap al-lows obtaining building composites based on it with the complete exclusion of natural raw materials

Sign in / Sign up

Export Citation Format

Share Document