Determination of the Chemical and Mineralogical Composition of Drilled Cuttings at Different Points throughout the Solids Control Process

2012 ◽  
Vol 727-728 ◽  
pp. 1677-1682 ◽  
Author(s):  
Marina Seixas Pereira ◽  
C.M.A. Panisset ◽  
T.B. Lima ◽  
Carlos Henrique Ataíde
Keyword(s):  
Drilling Fluid ◽  
Control Process ◽  
Mineralogical Composition ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
X Ray ◽  
Exploration And Production ◽  
Chemical And Mineralogical Composition ◽  
Solid Liquid ◽  
Solid Liquid Separation

In this work, we use x-ray fluorescence and x-ray diffraction methods to investigate the chemical and mineralogical composition of drilled cuttings at different points throughout the solids control process. Cuttings coated or contaminated with drilling fluid are the result of drilling. Over the past twenty years, studies have been conducted to assess the effects that these contaminated cuttings have on the environment, in both offshore and onshore scenarios. A more restrictive environmental legislation and the need to reduce drilling costs (exploration and production) has led to the optimization of solid-liquid separation. Knowledge of the chemical and mineralogical composition of drilled cuttings will assist in finding a dispersant and in determining an appropriate procedure for carrying out particle size analysis of these solids.

scholarly journals Influence of reactivity and mineralogical composition on instability due to the disintegration of shales from Paraíba and Ceará States, Brazil

Cerâmica ◽  
2019 ◽  
Vol 65 (375) ◽  
pp. 400-406
Author(s):  
C. A. Leal ◽  
M. N. C. Brunet ◽  
L. V. Amorim ◽  
H. L. Lira ◽  
F. C. C. Nogueira ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Bentonite Clay ◽  
Mineralogical Composition ◽  
Particle Size Analysis ◽  
Exchange Capacity ◽  
Potassium Citrate ◽  
American Petroleum Institute ◽  
Size Analysis ◽  
X Ray Diffraction ◽  
X Ray

Abstract This work aimed to correlate the reactivity and mineralogical composition of shales to their disintegration. To accomplish this, five samples of shale from Rio do Peixe Basin and Araripe Basin, located in the Brazilian States of Paraíba and Ceará, respectively, were characterized. A sample of industrialized bentonite clay was used as a reference to provide a comparison. Characterization was performed through cation exchange capacity, particle size analysis, X-ray fluorescence, and X-ray diffraction. Disintegration tests were performed according to the American Petroleum Institute standards in the presence of deionized water, aqueous potassium citrate solution, and drilling fluid. The results suggested that samples presenting no reactive clay mineral content may be unstable and the higher the reactivity of the samples to aqueous fluids does not necessarily imply a higher level of disintegration. This demonstrated that different mechanisms not associated with clay swelling may assume greater or lesser relevance on the instability of a formation.

scholarly journals Mining Wastes of an Albite Deposit as Raw Materials for Vitrified Mullite Ceramics

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 232
Author(s):  
Pedro J. Sánchez-Soto ◽  
Eduardo Garzón ◽  
Luis Pérez-Villarejo ◽  
George N. Angelopoulos ◽  
Dolores Eliche-Quesada
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Phase Evolution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Mining Wastes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Value

In this work, an examination of mining wastes of an albite deposit in south Spain was carried out using X-ray Fluorescence (XRF), X-ray diffraction (XRD), particle size analysis, thermo-dilatometry and Differential Thermal Analysis (DTA) and Thermogravimetric (TG) analysis, followed by the determination of the main ceramic properties. The albite content in two selected samples was high (65–40 wt. %), accompanied by quartz (25–40 wt. %) and other minor minerals identified by XRD, mainly kaolinite, in agreement with the high content of silica and alumina determined by XRF. The content of Na2O was in the range 5.44–3.09 wt. %, being associated with albite. The iron content was very low (<0.75 wt. %). The kaolinite content in the waste was estimated from ~8 to 32 wt. %. The particle size analysis indicated values of 11–31 wt. % of particles <63 µm. The ceramic properties of fired samples (1000–1350 °C) showed progressive shrinkage by the thermal effect, with water absorption and open porosity almost at zero at 1200–1250 °C. At 1200 °C, the bulk density reached a maximum value of 2.38 g/cm3. An abrupt change in the phase evolution by XRD was found from 1150 to 1200 °C, with the disappearance of albite by melting in accordance with the predictions of the phase diagram SiO2-Al2O3-Na2O and the system albite-quartz. These fired materials contained as main crystalline phases quartz and mullite. Quartz was present in the raw samples and mullite was formed by decomposition of kaolinite. The observation of mullite forming needle-shape crystals was revealed by Scanning Electron Microscopy (SEM). The formation of fully densified and vitrified mullite materials by firing treatments was demonstrated.

Preparation of xanthated bentonite and its removal behavior for Pb(II) ions

2010 ◽  
Vol 61 (5) ◽  
pp. 1235-1243 ◽  
Author(s):  
Y. F. He ◽  
F. R. Li ◽  
R. M. Wang ◽  
F. Y. Li ◽  
Y. Wang ◽  
...  
Keyword(s):  
Adsorption Mechanism ◽  
Removal Rate ◽  
Freundlich Isotherm ◽  
Particle Size Analysis ◽  
Lead Ions ◽  
Size Analysis ◽  
Optimum Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Xanthate was successfully grafted onto bentonite by a relatively simple solution reaction. The obtained xanthated bentonite (XBent) was characterized by FT-IR spectrophotometer, thermogravimetric analysis (TG), particle size analysis, x-ray diffraction (XRD) and scanning electron microscopy (SEM). XBent acting as a type of environmentally friendly adsorbent was applied to remove lead ions from aqueous solutions. The optimum conditions were as follows: [Pb2 + ] = 500 mg L−1, [XBent] = 2 g L−1, pH = 5.0; oscillating 60 min under 200 rpm at 25°C. The removal rate of lead was up to 99.9%. It was found that the lead(II) ions—XBent adsorption isotherm model fitted well to the Freundlich isotherm. The adsorption mechanism was also investigated by SEM and XRD, which concluded that lead ions were complexed or chelated with XBent. XBent appears to have potential to be used later in water treatment as a type of inorganic polymer reagent.

scholarly journals Recycling of Waste Solution after Hydrothermal Conversion of Fly Ash on a Semi-Technical Scale for Zeolite Synthesis

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1413
Author(s):  
Rafał Panek ◽  
Jarosław Madej ◽  
Lidia Bandura ◽  
Grzegorz Słowik
Keyword(s):  
Fly Ash ◽  
Nitrogen Adsorption ◽  
Particle Size Analysis ◽  
Al2o3 Content ◽  
Size Analysis ◽  
Zeolite Synthesis ◽  
Hydrothermal Conversion ◽  
Waste Solution ◽  
X Ray ◽  
X Zeolites

Nowadays, using fly ash for zeolites production has become a well-known strategy aimed on sustainable development. During zeolite synthesis in a hydrothermal conversion large amount of post-reaction solution is generated. In this work, the solution was used as a substrate for Na-A and Na-X zeolites synthesis at laboratory and technical scale. Obtained materials were characterized using particle size analysis, X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), transmission electron microscopy (TEM), Fourier transformed infrared spectroscopy (FTIR), and nitrogen adsorption/desorption isotherm. Produced zeolites revealed high purity (>98%) and monomineral zeolitic phase composition. The SiO2 content was in the range 39–42% and 40–38%, whereas Al2O3 content was 23–22% and 25–26% for Na-X and Na-A, respectively. TEM and BET analyses revealed Na-X zeolite pores were almost identical to commercial 13X with SBET in the range 671–734 m2/g. FTIR indicated slight differences between materials obtained at laboratory and technical scale in Si-O-(Si/Al) bridges of the zeolitic skeleton. The results showed good replicability of the laboratory process in the larger scale. The proposed method allows for waste solution reusability with a view to highly pure zeolites production in line with circular economy assumptions.

Synthesis of Alpha-Tricalcium Phosphate by Wet Reaction and Evaluation of Mechanical Properties

2012 ◽  
Vol 727-728 ◽  
pp. 1164-1169 ◽  
Author(s):  
Mônica Beatriz Thürmer ◽  
Rafaela Silveira Vieira ◽  
Juliana Machado Fernandes ◽  
Wilbur Trajano Guerin Coelho ◽  
Luis Alberto Santos
Keyword(s):  
Mechanical Properties ◽  
Calcium Phosphate ◽  
Tricalcium Phosphate ◽  
Calcium Nitrate ◽  
Chemical Precipitation ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Calcium Phosphate Cements

Calcium phosphate cements have bioactivity and osteoconductivity and can be molded and replace portions of bone tissue. The aim of this work was to study the obtainment of α-tricalcium phosphate, the main phase of calcium phosphate cement, by wet reaction from calcium nitrate and phosphoric acid. There are no reports about α-tricalcium phosphate obtained by this method. Two routes of chemical precipitation were evaluated and the use of two calcinations temperatures to obtain the phase of cement. The influence of calcination temperature on the mechanical properties of cement was evaluated. Cement samples were characterized by particle size analysis, X-ray diffraction, mechanical strength and scanning electron microscopy. The results demonstrate the strong influence of synthesis route on the crystalline phases of cement and the influence of concentration of reactants on the product of the reaction, as well as, on the mechanical properties of cement.

X-ray fluorescence spectrometry for rapid screening of particle size in soils

2021 ◽  
Author(s):  
Maame Croffie ◽  
Paul N. Williams ◽  
Owen Fenton ◽  
Anna Fenelon ◽  
Karen Daly
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Soil Texture ◽  
Particle Size Analysis ◽  
Parent Material ◽  
Fluorescence Spectrometry ◽  
Rapid Screening ◽  
Size Analysis ◽  
X Ray

&lt;p&gt;Soil texture is an essential factor for effective land management in agricultural production. Knowledge of soil texture and particle size at field scale can aid with on-going soil management decisions. Standard soil physical and gravimetric methods for particle size analysis are time-consuming and X-ray fluorescence spectrometry (XRF) provides a rapid and cost-effective alternative. The objective of this study was to explore the use of XRF as a predictor for particle size. An extensive archive of Irish soils with particle size and soil texture data was used to select samples for XRF analysis. Regression and correlation analyses on XRF determined results showed that the relationship between Rb and % clay varied with soil type and was dependent on the parent material. There was a strong relationship (R &gt; 0.62, R&lt;sup&gt;2&lt;/sup&gt;&gt;0.30, p&lt;0.05) between Rb and clay for soils originating from bedrock such as limestones and slate. Contrastingly, no significant relationship (R&lt;0.03, R&lt;sup&gt;2&lt;/sup&gt;=0.00, p&gt;0.05) exists between Rb and % clay for soils originating from granite and gneiss. Furthermore, there was a significant negative correlation (p&lt;0.05) between Rb and % sand. The XRF is a useful technique for rough screening of particle size distribution in soils originating from certain parent materials. Thus, this may contribute to the rapid prediction of soil texture based on knowledge of the particle size distribution.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;

scholarly journals Synthesis of SnO2 Nanoparticles by High Potential Electrolysis

2017 ◽  
Vol 12 (2) ◽  
pp. 281 ◽  
Author(s):  
Fredy Kurniawan ◽  
Rahmi Rahmi
Keyword(s):  
Particle Size ◽  
Sno2 Nanoparticles ◽  
Particle Size Analysis ◽  
Reaction Engineering ◽  
High Potential ◽  
Size Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nanoparticles Synthesis ◽  
The Fourier Transform

SnO2 nanoparticles have been synthesized by high voltage electrolysis. Tin bare was used for anode and cathode. The effect of potentials and electrolyte were studied. The particles obtained after electrolysis was characterized using X-ray Diffraction (XRD). The diffractogram is in agreement with the standard diffraction pattern of SnO2 which is identified as tetragonal structure. The Fourier Transform Infrared (FTIR) spectrum indicates that there is a vibration of Sn–O asymmetric at 580 cm-1. The optimum potential for SnO2 nanoparticles synthesis is 60 V at 0.06 M HCl which shows the highest UV-Vis spectrum. The absorption peak of SnO2 nanoparticles by UV-Vis spectrophotometer appears at about 207 nm. The particle size analysis shows that the SnO2 nanoparticles obtained have the size distribution in a range of 25-150 nm with the highest volume at 83.11 nm. Copyright © 2017 BCREC Group. All rights reservedReceived: 15th November 2016; Revised: 26th February 2017; Accepted: 27th February 2017How to Cite: Rahmi, R., Kurniawan, F. (2017). Synthesis of SnO2 Nanoparticles by High Potential Electrolysis. Bulletin of Chemical Reaction Engineering & Catalysis, 12 (2): 281-286 (doi:10.9767/bcrec.12.2.773.281-286)Permalink/DOI: http://dx.doi.org/10.9767/bcrec.12.2.773.281-286 

The Evaporative Decomposition of Solutions Method (Eds) for the Production of Ultrafine Y1Ba2Cu3O7 from Nitrate and Mixed Anion Precursor Solutions

1989 ◽  
Vol 169 ◽  
Author(s):  
Rollin E. Lakis ◽  
Sidney R. Butler
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Barium Carbonate ◽  
Hollow Spheres ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

AbstractY1Ba2Cu3O7 has been prepared by the evaporative decomposition of solutions method. Nitrate and mixed anion solutions were atomized and decomposed at temperatures ranging from 300°C to 950°C. The resulting materials have been characterized using x-ray powder diffraction, Thermal Gravimetric Analysis (TGA), particle size analysis, Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The powder consists of 0.3 micron agglomerated hollow spheres with a primary particle size of 0.06 micron. TGA and x-ray diffraction indicate the presence of barium nitrate and barium carbonate due to incomplete decomposition and/or product contamination by the process environment.

scholarly journals Studies of new occurrences of bentonite clays in the State of Paraíba for use in water based drilling fluids

2013 ◽  
Vol 66 (4) ◽  
pp. 485-491 ◽  
Author(s):  
Isabelle A. Silva ◽  
Julliana Marques R. Costa ◽  
Romualdo R. Menezes ◽  
Heber S. Ferreira ◽  
Gelmires de A. Neves ◽  
...  
Keyword(s):  
Bentonite Clay ◽  
Particle Size Analysis ◽  
The State ◽  
Size Analysis ◽  
Drilling Fluids ◽  
X Ray ◽  
Clay Deposits ◽  
Water Based ◽  
Bentonite Clays ◽  
New Occurrences

New bentonite clay deposits have recently been discovered in the state of Paraíba, mainly in the municipalities of Cubati and Pedra Lavrada, creating great expectations in view of the possibility of expanding industrial production using these new reserves. The aim of this study was to study the new occurrences of bentonite clay in Paraíba, particularly in the municipality of Pedra Lavrada, for use in water based drilling fluids. The mineralogical properties of the clays were characterized by particle size analysis using laser diffraction, and thermogravimetric and differential thermal analysis, and its chemical composition was analyzed by X-ray fluorescence, X-ray diffraction, cation exchange capacity and specific surface area. The bentonite clays were treated with sodium carbonate at concentrations of 75, 100, 125, 150 and 175mEq/100g of dry clay, to transform them from polycationic to sodium form. For the technological characterization, drilling fluids were prepared according to the standards of Petrobras. The results indicated that the mineralogical composition of the samples consisted of montmorillonite, kaolinite and quartz. As for their rheological properties, the samples were found to partially meet the rheological requirements of the Petrobras standard.

Sign in / Sign up

Export Citation Format

Share Document