Direct Manufacture of Hydroxyapatite Scaffolds Using Blue Laser

2014 ◽  
Vol 805 ◽  
pp. 128-133 ◽  
Author(s):  
Camila Roberta de Meira ◽  
Dannylo Thadeu Gomes ◽  
Francisco José Correa Braga ◽  
Benedito de Moraes Purquerio ◽  
Carlos Alberto Fortulan
Keyword(s):  
Liquid Phase ◽  
Bone Structure ◽  
Three Dimensional ◽  
Acrylic Resin ◽  
Blue Laser ◽  
Band Spectrum ◽  
Equivalent Diameter ◽  
Bovine Bone ◽  
Vibratory Mill ◽  
A New Technique

The study deals with the direct manufacturing of hydroxyapatite scaffolds using selective polymerization of the slurry liquid phase. The bovine hydroxyapatite has great similarity with the human bone structure, making it able for a direct connection with the bone tissues. This study aims to obtain scaffolds using a new technique of rapid prototyping, obtained by polymerization of acrylic resin (liquid phase of slurry) by ultraviolet light present in a range of the band spectrum emitted by the blue laser light. Sub-micrometer hydroxyapatite was obtained by the calcination and grinding of bovine bone in a vibratory mill. Mixtures of hydroxyapatite and resin were prototyped in three-dimensional pieces and sintered afterword and subjected to blue laser emission path directed in a CNC equipment. Grounded particles obtained in the grinding vibratory mill, with equivalent diameter of 0.35 microns, were reactive enough to compensate the low green densification bellow 50 vol%. Polymerization tests realized indicated that the incidence of the laser with fluency of 170 mW.s/mm2promoted the curing of the 0.5 mm diameter pieces in depth about 0.5 mm, which allowed the prototyping of the scaffolds with sufficient mechanical strength for handling.

Silicon layers grown over SiO2 by liquid phase epitaxy: Electron Microscopical study

1990 ◽  
Vol 48 (4) ◽  
pp. 566-567
Author(s):  
F. Banhart ◽  
F.O. Phillipp ◽  
R. Bergmann ◽  
E. Czech ◽  
M. Konuma ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Liquid Phase ◽  
Plasma Etching ◽  
Liquid Phase Epitaxy ◽  
Three Dimensional ◽  
Microscopical Study ◽  
Sample Temperature ◽  
Structural Defects ◽  
Si Substrates ◽  
Etched Surface

Defect-free silicon layers grown on insulators (SOI) are an essential component for future three-dimensional integration of semiconductor devices. Liquid phase epitaxy (LPE) has proved to be a powerful technique to grow high quality SOI structures for devices and for basic physical research. Electron microscopy is indispensable for the development of the growth technique and reveals many interesting structural properties of these materials. Transmission and scanning electron microscopy can be applied to study growth mechanisms, structural defects, and the morphology of Si and SOI layers grown from metallic solutions of various compositions.The treatment of the Si substrates prior to the epitaxial growth described here is wet chemical etching and plasma etching with NF3 ions. At a sample temperature of 20°C the ion etched surface appeared rough (Fig. 1). Plasma etching at a sample temperature of −125°C, however, yields smooth and clean Si surfaces, and, in addition, high anisotropy (small side etching) and selectivity (low etch rate of SiO2) as shown in Fig. 2.

scholarly journals Crystal–liquid phase transitions in three-dimensional complex plasma under microgravity conditions

2018 ◽  
Vol 946 ◽  
pp. 012144 ◽  
Author(s):  
V N Naumkin ◽  
A M Lipaev ◽  
V I Molotkov ◽  
D I Zhukhovitskii ◽  
A D Usachev ◽  
...  
Keyword(s):  
Phase Transitions ◽  
Liquid Phase ◽  
Three Dimensional ◽  
Complex Plasma ◽  
Microgravity Conditions

scholarly journals Pulsed Electromagnetic Cross-Well Exploration for Monitoring Permafrost and Examining the Processes of Its Geocryological Changes

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 60
Author(s):  
Viacheslav Glinskikh ◽  
Oleg Nechaev ◽  
Igor Mikhaylov ◽  
Kirill Danilovskiy ◽  
Vladimir Olenchenko
Keyword(s):  
High Performance ◽  
Geophysical Methods ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Data Interpretation ◽  
Industrial Facilities ◽  
Wide Range ◽  
Vector Finite Element ◽  
A New Technique ◽  
Pulsed Electromagnetic

This paper is dedicated to the topical problem of examining permafrost’s state and the processes of its geocryological changes by means of geophysical methods. To monitor the cryolithozone, we proposed and scientifically substantiated a new technique of pulsed electromagnetic cross-well sounding. Based on the vector finite-element method, we created a mathematical model of the cross-well sounding process with a pulsed source in a three-dimensional spatially heterogeneous medium. A high-performance parallel computing algorithm was developed and verified. Through realistic geoelectric models of permafrost with a talik under a highway, constructed following the results of electrotomography field data interpretation, we numerically simulated the pulsed sounding on the computing resources of the Siberian Supercomputer Center of SB RAS. The simulation results suggest the proposed system of pulsed electromagnetic cross-well monitoring to be characterized by a high sensitivity to the presence and dimensions of the talik. The devised approach can be oriented to addressing a wide range of issues related to monitoring permafrost rocks under civil and industrial facilities, buildings, and constructions.

scholarly journals Evolution of a narrow-band spectrum of random surface gravity waves

2003 ◽  
Vol 478 ◽  
pp. 1-10 ◽  
Author(s):  
KRISTIAN B. DYSTHE ◽  
KARSTEN TRULSEN ◽  
HARALD E. KROGSTAD ◽  
HERVÉ SOCQUET-JUGLARD
Keyword(s):  
Three Dimensional ◽  
Low Frequency ◽  
Three Dimensions ◽  
Band Spectrum ◽  
Nls Equation ◽  
Random Surface ◽  
Narrow Bandwidth ◽  
Quasi Stationary State ◽  
The Stability ◽  
Three Dimensional Simulations

Numerical simulations of the evolution of gravity wave spectra of fairly narrow bandwidth have been performed both for two and three dimensions. Simulations using the nonlinear Schrödinger (NLS) equation approximately verify the stability criteria of Alber (1978) in the two-dimensional but not in the three-dimensional case. Using a modified NLS equation (Trulsen et al. 2000) the spectra ‘relax’ towards a quasi-stationary state on a timescale (ε2ω0)−1. In this state the low-frequency face is steepened and the spectral peak is downshifted. The three-dimensional simulations show a power-law behaviour ω−4 on the high-frequency side of the (angularly integrated) spectrum.

Proton micromachining: a new technique for the production of three-dimensional microstructures

2000 ◽  
Vol 6 (3) ◽  
pp. 82-85 ◽  
Author(s):  
J.A. van Kan ◽  
T. Osipowicz ◽  
F. Watt ◽  
J. L. Sanchez
Keyword(s):  
Three Dimensional ◽  
New Technique ◽  
A New Technique

scholarly journals Parallel, linear, and subnanometric 3D tracking of microparticles with Stereo Darkfield Interferometry

2021 ◽  
Vol 7 (6) ◽  
pp. eabe3902
Author(s):  
Martin Rieu ◽  
Thibault Vieille ◽  
Gaël Radou ◽  
Raphaël Jeanneret ◽  
Nadia Ruiz-Gutierrez ◽  
...  
Keyword(s):  
High Precision ◽  
High Throughput ◽  
Single Molecule ◽  
Particle Tracking ◽  
Focal Plane ◽  
Tracking System ◽  
Three Dimensional ◽  
3D Tracking ◽  
Single Molecule Force Spectroscopy ◽  
A New Technique

While crucial for force spectroscopists and microbiologists, three-dimensional (3D) particle tracking suffers from either poor precision, complex calibration, or the need of expensive hardware, preventing its massive adoption. We introduce a new technique, based on a simple piece of cardboard inserted in the objective focal plane, that enables simple 3D tracking of dilute microparticles while offering subnanometer frame-to-frame precision in all directions. Its linearity alleviates calibration procedures, while the interferometric pattern enhances precision. We illustrate its utility in single-molecule force spectroscopy and single-algae motility analysis. As with any technique based on back focal plane engineering, it may be directly embedded in a commercial objective, providing a means to convert any preexisting optical setup in a 3D tracking system. Thanks to its precision, its simplicity, and its versatility, we envision that the technique has the potential to enhance the spreading of high-precision and high-throughput 3D tracking.

scholarly journals Numerical Network Modeling of Heat and Moisture Transfer through Capillary-Porous Building Materials

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1819
Author(s):  
Borys Basok ◽  
Borys Davydenko ◽  
Anatoliy M. Pavlenko
Keyword(s):  
Building Materials ◽  
Moisture Transfer ◽  
Three Dimensional ◽  
Total Pore Volume ◽  
Equivalent Diameter ◽  
Average Pore ◽  
The Difference ◽  
Three Dimensional Coordinate ◽  
Solid Liquid ◽  
Heat And Moisture

The article presents the modeling of the dynamics of the vapor-gas mixture and heat and mass transfer (sorption-desorption) in the capillary structure of the porous medium. This approach is underpinned by the fact that the porous structure is represented by a system of linear microchannels oriented along the axes of a three-dimensional coordinate system. The equivalent diameter of these channels corresponds to the average pore diameter, and the ratio of the total pore volume to the volume of the entire porous material corresponds to its porosity. The entire channel area is modeled by a set of cubic elements with a certain humidity, moisture content, pressure and temperature. A simulation is carried out taking into account the difference in temperatures of each of the phases: solid, liquid and gas.

scholarly journals Hard X-ray polarizer to enable simultaneous three-dimensional nanoscale imaging of magnetic structure and lattice strain

2016 ◽  
Vol 23 (5) ◽  
pp. 1210-1215 ◽  
Author(s):  
Jonathan Logan ◽  
Ross Harder ◽  
Luxi Li ◽  
Daniel Haskel ◽  
Pice Chen ◽  
...  
Keyword(s):  
Magnetic Circular Dichroism ◽  
Three Dimensional ◽  
Control Sample ◽  
Magnetic Ordering ◽  
X Rays ◽  
Diffractive Imaging ◽  
X Ray ◽  
Coherent Diffractive Imaging ◽  
Diffraction Patterns ◽  
A New Technique

Recent progress in the development of dichroic Bragg coherent diffractive imaging, a new technique for simultaneous three-dimensional imaging of strain and magnetization at the nanoscale, is reported. This progress includes the installation of a diamond X-ray phase retarder at beamline 34-ID-C of the Advanced Photon Source. The performance of the phase retarder for tuning X-ray polarization is demonstrated with temperature-dependent X-ray magnetic circular dichroism measurements on a gadolinium foil in transmission and on a Gd5Si2Ge2crystal in diffraction geometry with a partially coherent, focused X-ray beam. Feasibility tests for dichroic Bragg coherent diffractive imaging are presented. These tests include (1) using conventional Bragg coherent diffractive imaging to determine whether the phase retarder introduces aberrations using a nonmagnetic gold nanocrystal as a control sample, and (2) collecting coherent diffraction patterns of a magnetic Gd5Si2Ge2nanocrystal with left- and right-circularly polarized X-rays. Future applications of dichroic Bragg coherent diffractive imaging for the correlation of strain and lattice defects with magnetic ordering and inhomogeneities are considered.

Sign in / Sign up

Export Citation Format

Share Document