scholarly journals Numerical Investigation of a Process Control for the Roller Levelling Process Based on a Force Measurement

2016 ◽  
Vol 854 ◽  
pp. 249-254 ◽  
Author(s):  
Markus Grüber ◽  
Gerhard Hirt
Keyword(s):  
Process Control ◽  
Control Strategy ◽  
Material Properties ◽  
Force Measurement ◽  
Control Strategies ◽  
Fe Model ◽  
The Finite Element Method ◽  
Feed Forward Control ◽  
Strip Length ◽  
Control Curves

When processing conventional semi-finished metal strips, distinctive changes in the material properties along the strip length are unavoidable. The roller levelling process is sensitive to changes of those strip characteristics. Thus, a process control allowing for an online adaption of the roller levelling machine according to the actual strip characteristics is highly desirable. In order to enable a precise process layout, the calculation by the Finite Element Method (FEM) provides a suited strategy. Furthermore, the coupling of user-subroutines to an FE code offers the possibility to implement and test respective control strategies. This work proposes a control strategy that is based on a force measurement in the first load triangle of a levelling machine. A first FE model including a feedback control is used to calculate the dependence between the force in the first load triangle and the roll intermesh in the last load triangle leading to a flat sheet. The results are transferred to meta models – so called control curves – that give a direct relationship between the measured force and the roll intermesh. Within a second FE setup a feed-forward control based on these control curves is implemented and the proposed control strategy is investigated for varying yield strengths along the strip length. Thus, the time consuming FE simulations that are necessary to obtain the control curves are decoupled from the actual levelling process. According to the obtained results, the introduced approach is able to improve the sheet flatness for thin sheets when a change in the material properties occurs.

The application of compound proportional resonant control strategy in multiple PV inverters system

2018 ◽  
Vol 32 (34n36) ◽  
pp. 1840098
Author(s):  
Yuan Li ◽  
Huifang Shen ◽  
Chao Xiong ◽  
Yaofei Han ◽  
Guofeng He
Keyword(s):  
Control Strategy ◽  
Closed Loop ◽  
Control Strategies ◽  
Integrated Control ◽  
Reference Signal ◽  
Loop Model ◽  
Harmonic Compensation ◽  
Feed Forward ◽  
Feed Forward Control ◽  
Set Up

In order to eliminate the effect on the grid current caused by the background harmonic voltage and the reference signal on the grid connected multi-inverter, this paper adopts the double closed-loop feed-forward control strategy. This strategy is based on the inductor voltage and the grid-connected current, and the integrated control strategy of quasi-proportional resonance loop parallel to a specific harmonic compensation loop. Based on the closed-loop model of multiple inverters, the change curves of the transfer function of the two control strategies are compared with the feed-forward control and the composite proportional resonance. The two corresponding control methods are used to analyze the current quality of the multi-inverter impact. Finally, the MATLAB/Simulink simulation model is set up to verify the proposed control strategies. The simulation results show that the proposed method can achieve better tracking of the sinusoidal command signal at the fundamental frequency, and enhance the anti-interference ability of the system at the 3rd, 5th, and 7th harmonic frequency.

Optimization and Control Petroleum Refinery Wastewater Treatment Systems — Status, Trends and Needs

1989 ◽  
Vol 24 (3) ◽  
pp. 463-477
Author(s):  
Stephen G. Nutt
Keyword(s):  
Wastewater Treatment ◽  
Process Control ◽  
Petroleum Refinery ◽  
Control Strategies ◽  
Refinery Wastewater ◽  
Statistical Process ◽  
Petroleum Refinery Wastewater ◽  
Optimization And Control ◽  
And Control ◽  
Wastewater Treatment Systems

Abstract Based on discussions in workshop sessions, several recurring themes became evident with respect to the optimization and control of petroleum refinery wastewater treatment systems to achieve effective removal of toxic contaminants. It was apparent that statistical process control (SPC) techniques are finding more widespread use and have been found to be effective. However, the implementation of real-time process control strategies in petroleum refinery wastewater treatment systems is in its infancy. Considerable effort will need to be expended to demonstrate the practicality of on-line sensors, and the utility of automated process control in petroleum refinery wastewater treatment systems. This paper provides a summary of the discussions held at the workshop.

Learning and control

2018 ◽  
Author(s):  
Ivan Herreros
Keyword(s):  
Machine Learning ◽  
Reinforcement Learning ◽  
Brain Function ◽  
Control Strategies ◽  
Learning Problems ◽  
Animal Learning ◽  
Feed Forward Control ◽  
Machine Learning Applications ◽  
And Control

This chapter discusses basic concepts from control theory and machine learning to facilitate a formal understanding of animal learning and motor control. It first distinguishes between feedback and feed-forward control strategies, and later introduces the classification of machine learning applications into supervised, unsupervised, and reinforcement learning problems. Next, it links these concepts with their counterparts in the domain of the psychology of animal learning, highlighting the analogies between supervised learning and classical conditioning, reinforcement learning and operant conditioning, and between unsupervised and perceptual learning. Additionally, it interprets innate and acquired actions from the standpoint of feedback vs anticipatory and adaptive control. Finally, it argues how this framework of translating knowledge between formal and biological disciplines can serve us to not only structure and advance our understanding of brain function but also enrich engineering solutions at the level of robot learning and control with insights coming from biology.

scholarly journals Evaluation of a home-based 7-day infection control strategy for healthcare workers following high-risk exposure to severe acute respiratory coronavirus virus 2 (SARS-CoV-2): A cohort study

2020 ◽  
pp. 1-4
Author(s):  
Carla Benea ◽  
Laura Rendon ◽  
Jesse Papenburg ◽  
Charles Frenette ◽  
Ahmed Imacoudene ◽  
...  
Keyword(s):  
High Risk ◽  
Infection Control ◽  
Control Strategy ◽  
Healthcare Workers ◽  
Control Strategies ◽  
Risk Exposure ◽  
Nasopharyngeal Swab ◽  
Home Based ◽  
Respiratory Coronavirus ◽  
Second Wave

Abstract Objective: Evidence-based infection control strategies are needed for healthcare workers (HCWs) following high-risk exposure to severe acute respiratory coronavirus virus 2 (SARS-CoV-2). In this study, we evaluated the negative predictive value (NPV) of a home-based 7-day infection control strategy. Methods: HCWs advised by their infection control or occupational health officer to self-isolate due to a high-risk SARS-CoV-2 exposure were enrolled between May and October 2020. The strategy consisted of symptom-triggered nasopharyngeal SARS-CoV-2 RNA testing from day 0 to day 7 after exposure and standardized home-based nasopharyngeal swab and saliva testing on day 7. The NPV of this strategy was calculated for (1) clinical coronavirus disease 2019 (COVID-19) diagnosis from day 8–14 after exposure, and for (2) asymptomatic SARS-CoV-2 detected by standardized nasopharyngeal swab and saliva specimens collected at days 9, 10, and 14 after exposure. Interim results are reported in the context of a second wave threatening this essential workforce. Results: Among 30 HCWs enrolled, the mean age was 31 years (SD, ±9), and 24 (80%) were female. Moreover, 3 were diagnosed with COVID-19 by day 14 after exposure (secondary attack rate, 10.0%), and all cases were detected using the 7-day infection control strategy: the NPV for subsequent clinical COVID-19 or asymptomatic SARS-CoV-2 detection by day 14 was 100.0% (95% CI, 93.1%–100.0%). Conclusions: Among HCWs with high-risk exposure to SARS-CoV-2, a home-based 7-day infection control strategy may have a high NPV for subsequent COVID-19 and asymptomatic SARS-CoV-2 detection. Ongoing data collection and data sharing are needed to improve the precision of the estimated NPV, and here we report interim results to inform infection control strategies in light of a second wave threatening this essential workforce.

Application of Combined Feedforward and Feedback Controller With Shaped Input to Benchmark Problem

2010 ◽  
Vol 132 (2) ◽  
Author(s):  
Young Joo Shin ◽  
Peter H. Meckl
Keyword(s):  
Feedback Control ◽  
Control Strategy ◽  
Control Strategies ◽  
Control Design ◽  
Single Frequency ◽  
Benchmark Problems ◽  
Control Force ◽  
Benchmark Problem ◽  
Advantages And Disadvantages ◽  
Robust Control Design

Benchmark problems have been used to evaluate the performance of a variety of robust control design methodologies by many control engineers over the past 2 decades. A benchmark is a simple but meaningful problem to highlight the advantages and disadvantages of different control strategies. This paper verifies the performance of a new control strategy, which is called combined feedforward and feedback control with shaped input (CFFS), through a benchmark problem applied to a two-mass-spring system. CFFS, which consists of feedback and feedforward controllers and shaped input, can achieve high performance with a simple controller design. This control strategy has several unique characteristics. First, the shaped input is designed to extract energy from the flexible modes, which means that a simpler feedback control design based on a rigid-body model can be used. In addition, only a single frequency must be attenuated to reduce residual vibration of both masses. Second, only the dynamics between control force and the first mass need to be considered in designing both feedback and feedforward controllers. The proposed control strategy is applied to a benchmark problem and its performance is compared with that obtained using two alternative control strategies.

Robust H2/H∞Control Strategy for Linear Markovian Jump Systems

2014 ◽  
Vol 525 ◽  
pp. 646-652
Author(s):  
Min Bian ◽  
Qing Yun Guo
Keyword(s):  
Control Strategy ◽  
State Feedback ◽  
Control Strategies ◽  
State Feedback Control ◽  
Linear Matrix ◽  
Bounded Real Lemma ◽  
Finite State ◽  
Linear State ◽  
Feasible Solutions ◽  
Jump Systems

The robust H2/<em>H</em>∞ control strategy for a class of linear continuous-time uncertain systems with randomly jumping parameters is investigated. The transition of the jumping parameters is decided by a finite-state Markov process. The uncertainties are supposed to be norm-bounded. It is desired to design a linear state feedback control strategies such that the closed-loop system satisfies H performance and minimizes the H2 norm of the system. A sufficient condition is first established on the existence of the robust H2/<em>H</em>∞controller bases on the bounded real lemma. Then the corresponding state-feedback law is given in terms of a set of linear matrix inequalities (LMIs). It is showed that this condition is equivalent to the feasible solutions problem of LMI. Furthermore, the control strategy design problem is converted into a convex optimization problem subject to LMI constraints, which can be easily solved by standard numerical software.

scholarly journals Measurement and Process Control in Precision Hot Embossing

2013 ◽  
Author(s):  
Maia R. Bageant ◽  
David E. Hardt
Keyword(s):  
Process Control ◽  
Material Properties ◽  
Disturbance Rejection ◽  
Closed Loop ◽  
Hot Embossing ◽  
Commercial Production ◽  
Bulk Deformation ◽  
Functional Tests ◽  
Medical Field ◽  
High Degree

Microfluidic technologies hold a great deal of promise in advancing the medical field, but transitioning them from research to commercial production has proven problematic. We propose precision hot embossing as a process to produce high volumes of devices with low capital cost and a high degree of flexibility. Hot embossing has not been widely applied to precision forming of hard polymers at viable production rates. To this end we have developed experimental equipment capable of maintaining the necessary precision in forming parameters while minimizing cycle time. In addition, since equipment precision alone does not guarantee consistent product quality, our work also focuses on real-time sensing and diagnosis of the process. This paper covers both the basic details for a novel embossing machine, and the utilization of the force and displacement data acquired during the embossing cycle to diagnose the state of the material and process. The precision necessary in both the forming machine and the instrumentation will be covered in detail. It will be shown that variation in the material properties (e.g. thickness, glass transition temperature) as well as the degree of bulk deformation of the substrate can be detected from these measurements. If these data are correlated with subsequent downstream functional tests, a total measure of quality may be determined and used to apply closed-loop cycle-to-cycle control to the entire process. By incorporating automation and specialized precision equipment into a tabletop “microfactory” setting, we aim to demonstrate a high degree of process control and disturbance rejection for the process of hot embossing as applied at the micron scale.

660MW Single Auxiliary Ultra-Supercritical Unit Main Stream’s Temperature Control Strategy Optimization Studies

2014 ◽  
Vol 909 ◽  
pp. 317-322
Author(s):  
Huan Pao Huang ◽  
Ji An Yu ◽  
Qian Su ◽  
Lei Wang
Keyword(s):  
Temperature Control ◽  
Control Strategy ◽  
Control Strategies ◽  
Dynamic Parameter ◽  
Pilot Project ◽  
Smith Predictor ◽  
Temperature Control System ◽  
Performance Requirements ◽  
And Performance ◽  
Adjustable Range

2 × 660MW ultra-supercritical units of O'Brien Power Plant are single configuration of auxiliary pilot project, due to the higher its parameters and performance requirements, it need better control strategies to ensure safe and economical operation. Against traditional cascade PID main steam’s temperature control system delaying large, this article proposed control strategy based on Smith estimated. Main steam’s temperature controlled object inert zone mathematical model can be showed by multi-volume model, and use the improved system for large inertia Smith Predictor to make dynamic parameter control systems improvements. Simulation results of the simulation machine show that: Optimization emperor steam temperature control is in an adjustable range and the policy in separate auxiliary units is feasible.

The Control Strategy Study of Doubly-Fed Wind Turbine Participated in Frequency Regulation

2012 ◽  
Vol 512-515 ◽  
pp. 788-793
Author(s):  
Xiao Hua Zhou ◽  
Ming Qiang Wang ◽  
Wei Wei Zou
Keyword(s):  
Wind Turbine ◽  
Control Strategy ◽  
Large Scale ◽  
Control Strategies ◽  
Frequency Control ◽  
Frequency Regulation ◽  
Strategy Study ◽  
Fuzzy Control Strategy ◽  
Doubly Fed ◽  
System Frequency

Traditional decoupling control strategy of doubly-fed induction generator (DFIG) wind turbine makes little contribution to system inertia and do not participate in the system frequency control, the synchronization of large-scale wind power requires wind turbine have the ability to participate in the regulation of power system frequency. This paper adds a frequency control segment to traditional DFIG wind turbine and considers the doubly-fed wind turbine operating on the state of the super-synchronous speed, by analysis the effect of inertia and proportional control strategies, a fuzzy control strategy which combines the advantages of the former two control strategies is proposed, simulation results show that this control strategy can more effectively improve the system frequency response.

Sign in / Sign up

Export Citation Format

Share Document