Metallographic Analysis of Parts Produced by Rheocasting Method SEED

2017 ◽  
Vol 891 ◽  
pp. 360-365
Author(s):  
Barbora Bryksí Stunová ◽  
Vlastimil Bryksí ◽  
Maxim Puchnin
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Electron Microscope ◽  
Chemical Composition ◽  
Scanning Electron Microscope ◽  
Light Microscopy ◽  
Metallographic Analysis ◽  
Process Conditions ◽  
Heat Treated ◽  
Scanning Electron

The article shows the analysis of castings parts produced by rheocasting method SEED. Structures of as cast and heat treated castings samples were observed by light microscopy and electron microscopy. Scanning electron microscope was also used for studying of fracture surfaces after destruction of the samples during testing of mechanical properties. Also analysis of chemical composition of specific phenomena found within the structure is described. Findings resulting from those analyses are related with the technological settings and other process conditions.

Comparison of Larval Stored Product Beetle Mandibles by Light Microscope and Scanning Electron Microscope

1981 ◽  
Vol 64 (1) ◽  
pp. 199-224
Author(s):  
John E Kvenberg
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Light Microscopy ◽  
Light Microscope ◽  
Morphological Characteristics ◽  
Scanning Electron ◽  
Conventional Light Microscopy

Abstract Larval stored product beetle mandibles were studied by comparing images made by scanning electron microscopy with those made by conventional light microscopy. Discussion of morphological characteristics is based on illustrations of 25 species

Scanning electron microscopy of sporangia of Coelomomyces

1973 ◽  
Vol 51 (7) ◽  
pp. 1325-1330 ◽  
Author(s):  
C. E. Bland ◽  
J. N. Couch
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Light Microscopy ◽  
Undescribed Species ◽  
Scanning Electron

The scanning electron microscope is used in an examination of the sporangia of 18 described and 3 undescribed species of Coelomomyces. As a possible aid to taxonomy, those species considered in this study are grouped into eight morphologically recognizable groups. The complementary use of light microscopy and scanning electron microscopy in studies of this type is emphasized.

Scanning Electron Microscopy of the Denticles and Eggs of Ascaris lumbricoides and Ascaris suum

1972 ◽  
Vol 30 ◽  
pp. 392-393
Author(s):  
John E. Ubelaker ◽  
Venita F. Allison
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Light Microscopy ◽  
Ascaris Suum ◽  
Slaughter House ◽  
Molar Teeth ◽  
Morphological Differences ◽  
Scanning Electron

Morphological differences between Ascaris of human and porcine origins have been difficult to detect. Sprent has distinguished the two species by the characteristics of the denticles observed by light microscopy. The present study is concerned with the differences in morphology of the denticles and with the examination of the ova of the two species as revealed by scanning electron microscopy.Hospital and slaughter house specimens were acquired locally, fixed in phosphate buffered paraformaldehyde and stored in 70% ethanol overnight. Preparative procedures for scanning electron microscopy were as previously reported. Specimens were examined in a JEOL JSMU-3 scanning electron microscope.The denticles of Ascaris suum are regular in distribution and conoid in shape (Fig. 1, A and B). Each denticle is cuspid; no multiple cusps were observed. The “molar teeth” forms previously described probably result from observations of cusps from which adhering debris was not removed in preparation.

Preparing plant chromosomes for scanning electron microscopy

Genome ◽  
1990 ◽  
Vol 33 (3) ◽  
pp. 333-339 ◽  
Author(s):  
John E. Dillé ◽  
Douglas C. Bittel ◽  
Kathleen Ross ◽  
J. Perry Gustafson
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
In Situ Hybridization ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Light Microscopy ◽  
Plant Chromosomes ◽  
Cellular Debris ◽  
Scanning Electron

The scanning electron microscope may be useful in the analysis of plant chromosomes treated with in situ hybridization, especially when the probes and (or) chromosomes are near or beyond the resolution of the light microscope. Usual methods of plant chromosome preparation are unsuitable for scanning electron microscope observation as a result of cellular debris, which also interferes with probe hybridization. A method is described whereby protoplasts are obtained from fixed root tips by enzymatic digestion and applied to slides in a manner that produces little or no cellular debris overlying the chromosomes. The slides were examined by scanning electron microscopy and light microscopy after C-banding and in situ hybridization with a rye nucleolus organizer region spacer probe. This technique, which allows for scanning electron microscope visualization of bands and probes not easily identified with light microscopy, should prove useful in the physical mapping of low copy number or unique DNA sequences.Key words: protoplasts, rice, wheat, rye, physical maps, in situ hybridization.

scholarly journals Effect of Microstructure on Mechanical Properties of BA1055 Bronze Castings

2014 ◽  
Vol 14 (2) ◽  
pp. 73-78 ◽  
Author(s):  
J. Łabanowski ◽  
T. Olkowski
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Electron Microscope ◽  
Chemical Composition ◽  
Scanning Electron Microscope ◽  
Aluminum Bronze ◽  
Marine Propellers ◽  
Casting Technology ◽  
Alloy Microstructure ◽  
Scanning Electron

Abstract The article presents research results performed on aluminum bronze CuAl10Fe5Ni5 (BA1055) castings used for marine propellers. Metallographic studies were made on light microscope and a scanning electron microscope to assess quantitatively and qualitatively the alloy microstructure. It has been shown that the shape, size and distribution of the iron-rich к−phase precipitates in bronze microstructure significantly affect its mechanical properties. With an increase in the number of small к−phase precipitates increases the tensile strength of castings, while the presence of large globular precipitates improves ductility. Fragmentation and shape of κ−phase precipitates depends on many factors, particularly on the chemical composition of the alloy, Fe/Ni ratio, cooling rate and casting technology.

Scanning electron microscopy of bacterial colonies. I. Diplococcus pneumoniae and Streptococcus pyogenes

1972 ◽  
Vol 18 (2) ◽  
pp. 219-223 ◽  
Author(s):  
E. Louise Springer ◽  
Ivan L. Roth
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Chemical Composition ◽  
Scanning Electron Microscope ◽  
Streptococcus Pyogenes ◽  
Intact Cells ◽  
Scanning Electron

A topographic study of the colonies of Diplococcus pneumoniae and Streptococcus pyogenes was made by means of scanning electron microscopy. The colonies of D. pneumoniae were round and entire with gradually sloping sides and an area of autolysis at the top of the colony. The area of autolysis had a convoluted, stippled surface devoid of intact cells or cell remnants. Colonies of S. pyogenes are rounded, dome-shaped colonies with steep sides. An amorphous supporting matrix was seen under the top layer of cells in the colony of S. pyogenes. The chemical composition of the supporting matrix in the streptococcal colony and the material which makes up the surface of the area of autolysis is unknown. This study establishes that the scanning electron microscope is a useful tool for observing the topography of bacterial colonies.

The Broad Applications of the Scanning Electron Microscope

1969 ◽  
Vol 27 ◽  
pp. 20-21
Author(s):  
C. T. Nightingale ◽  
S. E. Summers ◽  
T. P. Turnbull
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Light Microscopy ◽  
Surface Topography ◽  
Great Depth ◽  
Resolving Power ◽  
Depth Of Field ◽  
Pictorial Representations ◽  
Scanning Electron

The ease of operation of the scanning electron microscope has insured its wide application in medicine and industry. The micrographs are pictorial representations of surface topography obtained directly from the specimen. The need to replicate is eliminated. The great depth of field and the high resolving power provide far more information than light microscopy.

High Resolution Scanning Electron Microscopy

1991 ◽  
Vol 49 ◽  
pp. 478-479
Author(s):  
David Joy ◽  
James Pawley
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Beam ◽  
Electron Microscope ◽  
High Resolution ◽  
Scanning Electron Microscope ◽  
Electron Probe ◽  
Impact Point ◽  
Interaction Volume ◽  
Scanning Electron

The scanning electron microscope (SEM) builds up an image by sampling contiguous sub-volumes near the surface of the specimen. A fine electron beam selectively excites each sub-volume and then the intensity of some resulting signal is measured. The spatial resolution of images made using such a process is limited by at least three factors. Two of these determine the size of the interaction volume: the size of the electron probe and the extent to which detectable signal is excited from locations remote from the beam impact point. A third limitation emerges from the fact that the probing beam is composed of a finite number of discrete particles and therefore that the accuracy with which any detectable signal can be measured is limited by Poisson statistics applied to this number (or to the number of events actually detected if this is smaller).

SCANNING ELECTRON MICROSCOPE: POSSIBILITIES FOR STUDYING KIDNEY DISEASES

2020 ◽  
pp. 176-182
Author(s):  
Mamaeva S.N. ◽  
Vinokurov R.R. ◽  
Munkhalova Ya.A. ◽  
Dyakonova D.P. ◽  
Platonova V.A. ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Red Blood Cells ◽  
Blood Cells ◽  
Filtration Rate ◽  
Kidney Diseases ◽  
First Time ◽  
Scanning Electron

Currently, due to the intensive development of high-tech science-intensive medical and research devices, more and more attention is paid to the development of diagnostics of rare and difficult to diagnose diseases. It is known that among numerous nephropathies, hematuria may be the only symptom of kidney and urinary tract diseases, which complicates their diagnosis and treatment. In order to develop new approaches for the diagnosis of nephropathies, the authors have been studying the morphology of red blood cells in the blood and urine of children and adults using a scanning electron microscope for several years. The paper presents the results of studies of children with various kidney diseases, including IgA-nephropathy, and chronic glomerulonephritis. Scanning electron microscopy was used for the first time to detect nanoparticles on the surface of red blood cells, the size of which is comparable to the size of viruses, which became the basis for one of the authors ' assumptions, namely, the possible transport of certain types of viruses by red blood cells. Thus, some kidney diseases could be considered virus-associated. This paper presents for the first time the results of determining the glomerular filtration rate of both kidneys separately in the study of separate kidney function and of the study of urine smears obtained during catheterization of the ureters in patients with hydronephrosis of one of the kidneys by scanning electron microscopy. As in previous studies, nanoparticles were found on the surface of red blood cells, which leads to the conclusion about the possible viral nature of the disease of the considered patient. In addition, smear images obtained using a microscope showed a significant difference in the elements of the right and left kidneys urine, which did not contradict the data on the study of glomerular filtration rate. According to the authors, the capabilities of the scanning electron microscope can be applied in fundamental research of kidney diseases at the cellular and molecular levels, forming new ideas about their origin, as well as on the basis of which new methods of non-invasive diagnostics can be built.

The External Morphology of the Eggs of Culex (Culex) saltanensis (Diptera: Culicidae) Under Scanning Electron Microscopy

2020 ◽  
Author(s):  
J R Santos-Mallet ◽  
T D Balthazar ◽  
A A Oliveira ◽  
W A Marques ◽  
A Q Bastos ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Optical Microscopy ◽  
Osmium Tetroxide ◽  
Neotropical Region ◽  
External Morphology ◽  
Metal Supports ◽  
Scanning Electron

Abstract The aim of the present study was to describe the morphology of the eggs of Culex (Culex) saltanensis Dyar that occurs in the Neotropical region. Eggs of the Cx. (Cux.) saltanensis were collected at the Mata Atlântica FIOCRUZ campus, fixed in 1% osmium tetroxide, prepared for mounting on metal supports, observed under a scanning electron microscope, and described morphologically. The eggs had a coniform shape with a length of approximately 0.5 mm (505–510 µm) and a width in the median portion of 117 µm (113–123 µm). Upper portion is lined with tubers of irregular shape and varying sizes (0.64–1.31 µm), located on a cross-linked matrix forming bands observed under optical microscopy. The micropyle is encased in a necklace of approximately 6.6-µm plates arranged in a flower-like shape. Comparing Cx. (Cux.) saltanensis eggs with several species of different genera, important divergent characteristics can be observed. However, this study points to the need for new descriptions of eggs of species belonging to the same subgenus in order to analyze if there will be differences between them. Culex (Cux.) saltanensis eggs have particular characteristics not observed in eggs of other Culicidae genera.

Sign in / Sign up

Export Citation Format

Share Document