The Development of New Materials and Modes of Casting Metal Powder Mixtures (MIM Technology)

2019 ◽  
Vol 945 ◽  
pp. 538-542 ◽  
Author(s):  
A.Yu. Korotchenko ◽  
D.E. Khilkov ◽  
M.V. Tverskoy
Keyword(s):  
Shear Rate ◽  
Metal Powder ◽  
Nonlinear Dependence ◽  
Technological Properties ◽  
New Materials ◽  
Powder Mixtures ◽  
Flow Channels ◽  
The Cost ◽  
Mim Technology

In the present work, to reduce the cost of production of the parts with MIM technology, proposed to use a new metal powder mixture (feedstock are presented) with the increased size of the powder to 50 microns. New feedstock are presented recommended for use in the manufacture of parts with a wall thickness of 5 mm. Shows the main physical and technological properties of new metal powder mix (feedstock) 40ХМА of steel intended for the manufacture of parts via MIM technology. Given the results of determination of granulometric composition and particle shape. The obtained values of tensile strength, hardness and roughness. The results of determining the dependence of viscosity on shear rate. For simulation of rheological properties of selected elastic-visco-plastic model of Bingham type with nonlinear dependence of viscosity on shear rate and temperature. The example of the calculation of feedstock fill the cavity of the mold. The analysis of defects in green part, associated with an irregular velocity field in the flow channels feedstock form.

Development of Ultra-Fluid Compositions of Feedstock for Metal Injection Molding

2020 ◽  
Vol 992 ◽  
pp. 529-533
Author(s):  
A.Yu. Korotchenko ◽  
D.E. Khilkov ◽  
M.V. Tverskoy ◽  
A.A. Khilkova
Keyword(s):  
Injection Molding ◽  
Metal Powder ◽  
Large Particle ◽  
Metal Injection Molding ◽  
Particle Sizes ◽  
Pressing Pressure ◽  
Compression Pressure ◽  
Powder Mixtures ◽  
The Cost ◽  
Mim Technology

In this paper, to reduce the cost of production of parts by injection molding technology of metal powder mixtures (MIM technology), it is proposed to use metal powder mixtures (feedstock) with high fluidity for the manufacture of green parts. High fluidity is achieved by increasing the proportion of paraffin wax in the binder. This can significantly reduce the pressing pressure when pressing the feedstock into the mold cavity to values less than 1 bar, and eliminate the use of expensive injection molding machines with high compression pressure. High fluidity also allows the use of powders with large particle sizes, which significantly reduces the cost of feedstock. The absence of high pressure on the mold walls during the pressing of the feedstock allows the use of molds made of cheaper materials such as silicone, plastic, gypsum and others.

Mekanisme Dan Proteksi Jaminan Nasabah Pada Gadai Informal

Liquidity ◽  
2017 ◽  
Vol 6 (2) ◽  
pp. 103-109
Author(s):  
Yuri Nanda Larasati ◽  
Jafril Khalil
Keyword(s):  
Qualitative Research ◽  
Research Methods ◽  
Financial Services ◽  
Field Data ◽  
Qualitative Research Methods ◽  
Research Field ◽  
Consumer Society ◽  
Library Research ◽  
The Cost

Regulation of the financial services authority (OJK) No. 31/POJK.05/2016 on Venture had arranged that the financial services agency on the basis of the law of pledge is in coaching and supervision OJK. Yet the existence of laws – invitation to Governing Enterprise pawn shops causing business activities conducted by the above parties are not yet regulated. The condition is feared could cause harm to the consumer society. The purpose of this research is to know the procedures, mechanisms, protection of goods and guarantee the consumer on an informal pledge financing, methods of determination of the cost of maintenance of the goods and the goods of the execution mechanism of the pledge as well as protection for the collateral items are viewed from the side of the consumer by looking at laws-invitations and Sharia. To find out whether the pledge have gotten permission from OJK. This research uses qualitative research methods with the study of library research, field data and simulations. The approach used in this study is the empirical juridical approach. Elaboration upon the results is discussed further in this article.

The Awareness Level of the Safety and Health of the Operational Level

2017 ◽  
Vol 3 (1) ◽  
pp. 42
Author(s):  
Roshanira Che Mohd Noor ◽  
Nur Atiqah Rochin Demong
Keyword(s):  
Health And Safety ◽  
Health Conditions ◽  
Effective Strategies ◽  
Operational Level ◽  
Safety And Health ◽  
Health Factors ◽  
The Cost ◽  
The Relationship ◽  
Awareness Level

Providing a safe and healthy workplace is one of the most effective strategies in for holding down the cost of doing construction business. It was a part of the overall management system to facilitate themanagement of the occupational health and safety risk that are associated with the business of the organization. Factors affected the awareness level inclusive of safety and health conditions, dangerous working area, long wait care and services and lack of emergency communication werethe contributed factors to the awareness level for the operational level. Total of 122 incidents happened at Telekom Malaysia Berhad as compared to year 2015 only 86 cases. Thus, the main objective of this study was to determine the relationship between safety and health factors and the awareness level among operational workers.The determination of this research was to increase the awareness level among the operational level workerswho committing to safety and health environment.

ANALISIS PERHITUNGAN HARGA POKOK PRODUKSI DAN PENENTUAN HARGA JUAL ATAS PRODUK (Studi Kasus Pada PT Dasa Windu Agung)

2016 ◽  
Vol 1 (2) ◽  
pp. 183-190
Author(s):  
Dwi Urip Wardoyo
Keyword(s):  
Manufacturing Industry ◽  
Sampling Method ◽  
Manufacturing Companies ◽  
Test Analysis ◽  
Automotive Components ◽  
Convenience Sampling ◽  
Cost Of Production ◽  
The Cost ◽  
Keywords Cost

This study aims to determine the determination of the cost of production for products produced by PT. DWA. The Company is engaged in the manufacturing industry specialized in automotive components. Its activity is carried out through a series of production processes, so that expenses spent in the production will be calculated into the cost of the production sold. The population in this study were all manufacturing companies in Jakarta. Convenience sampling method selected one of the companies that get the confidence to assemble three national car project in Indonesia, namely Timor, Bakrie and Maleo. Test analysis used in this study is to test the calculation of full costing with job order costing. This study shows that (a) determination of the cost elements associated with the cost of production and (b) determining the cost of production on a product-based job costing with full costing approach. Keywords: cost of production, full costing

Determination of the minimum number of technological bases of a part

2020 ◽  
pp. 73-75
Author(s):  
B.M. Bazrov ◽  
T.M. Gaynutdinov
Keyword(s):  
Cost Price ◽  
Labor Input ◽  
Part Surface ◽  
Technological Base ◽  
Size Accuracy ◽  
Minimum Number ◽  
The Cost ◽  
Input Cost ◽  
Selection Of

The selection of technological bases is considered before the choice of the type of billet and the development of the route of the technological process. A technique is proposed for selecting the minimum number of sets of technological bases according to the criterion of equality in the cost price of manufacturing the part according to the principle of unity and combination of bases at this stage. Keywords: part, surface, coordinating size, accuracy, design and technological base, labor input, cost price. [email protected]

Determination of load restoration sequence taking into account the cost of electric service interruption

1981 ◽  
Vol 101 (1) ◽  
pp. 98-106
Author(s):  
Koichi Nara ◽  
Susumu Yamashiro ◽  
Toichiro Koike
Keyword(s):  
Service Interruption ◽  
The Cost

scholarly journals The Application of Electromagnetic Sensors for Determination of Cherenkov Cone Inside and in the Vicinity of the Detector Volume in Any Environment Known

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 992
Author(s):  
Valeriu Savu ◽  
Mădălin Ion Rusu ◽  
Dan Savastru
Keyword(s):  
Energy Levels ◽  
Cherenkov Detector ◽  
Electromagnetic Sensors ◽  
The Cost ◽  
Information Errors ◽  
The Universe ◽  
Large Frequency ◽  
Very High ◽  
Detector Volume

The neutrinos of cosmic radiation, due to interaction with any known medium in which the Cherenkov detector is used, produce energy radiation phenomena in the form of a Cherenkov cone, in very large frequency spectrum. These neutrinos carry with them the information about the phenomena that produced them and by detecting the electromagnetic energies generated by the Cherenkov cone, we can find information about the phenomena that formed in the universe, at a much greater distance, than possibility of actually detection with current technologies. At present, a very high number of sensors for detection electromagnetic energy is required. Thus, some sensors may detect very low energy levels, which can lead to the erroneous determination of the Cherenkov cone, thus leading to information errors. As a novelty, we propose, to use these sensors for determination of the dielectrically permittivity of any known medium in which the Cherenkov detector is used, by preliminary measurements, the subsequent simulation of the data and the reconstruction of the Cherenkov cone, leading to a significant reduction of problems and minimizing the number of sensors, implicitly the cost reductions. At the same time, we offer the possibility of reconstructing the Cherenkov cone outside the detector volume.

scholarly journals Materials for Automotive Lightweighting

2019 ◽  
Vol 49 (1) ◽  
pp. 327-359 ◽  
Author(s):  
Alan Taub ◽  
Emmanuel De Moor ◽  
Alan Luo ◽  
David K. Matlock ◽  
John G. Speer ◽  
...  
Keyword(s):  
Galvanic Corrosion ◽  
Low Carbon Steel ◽  
High Strength Steels ◽  
High Strength ◽  
Low Carbon ◽  
New Materials ◽  
Specific Strength ◽  
Advanced High Strength Steels ◽  
Strength And Stiffness ◽  
The Cost

Reducing the weight of automobiles is a major contributor to increased fuel economy. The baseline materials for vehicle construction, low-carbon steel and cast iron, are being replaced by materials with higher specific strength and stiffness: advanced high-strength steels, aluminum, magnesium, and polymer composites. The key challenge is to reduce the cost of manufacturing structures with these new materials. Maximizing the weight reduction requires optimized designs utilizing multimaterials in various forms. This use of mixed materials presents additional challenges in joining and preventing galvanic corrosion.

Sign in / Sign up

Export Citation Format

Share Document