LABORATORY STUDIES OF PREDATION OF SNAILS BY LARVAE OF THE MARSH FLY, SEPEDON TENUICORNIS (DIPTERA: SCIOMYZIDAE)

1971 ◽  
Vol 103 (5) ◽  
pp. 638-649 ◽  
Author(s):  
Robert P. Geckler

AbstractLarvae of the marsh fly, Sepedon tenuicornis Cresson, were used to determine (1) number and approximate volume of snails killed before pupation, (2) time required to make the first kill as a function of distance and snail density, and (3) vulnerability of snails of different sizes to larvae of different sizes.Results1. Mean number of snails killed (by 34 larvae): 8.1 ± 2.5, (S.E.) Volume: 544 ± 256 mm3.2. Regression line relating time required to kill as a function of snail density: T (minutes) = 65.3–111.6 × (snail density).Regression line relating time to kill and snail densities of 0.6 and 1.2 snails/cm as a function of distance from snails: T = 0.79–0.33 × (distance).Data from a snail density of 0.3/cm could not be pooled because of high day-to-day variation in larvae.3. Vulnerability of snails can be expressed for each larva length by the equation: Fraction of snails killed = a + b × (snail size).Values of a and b are as follows:

1988 ◽  
Vol 24 (1-4) ◽  
pp. 503-506 ◽  
Author(s):  
D.W. Moeller ◽  
S.N. Rudnick ◽  
E.F. Maher

Abstract Laboratory tests in a radon chamber of a hassock fan-ion generator unit, developed for reducing airborne radon decay product concentrations inside buildings, produced reduction in potential alpha energy concentrations (PAECs) ranging from 83% to 86%. Similar reductions were observed in rooms in a home with relatively high radon concentrations. Reduction in a home with relatively low radon concentrations ranged from 76% to 79%. The time required for the removal unit to reach the point of maximum reduction was 6 to 8 h. A major share of the reduction occurred within the first 3 to 4 h. The speed of the fan, which was variable, had little effect on the ultimate removal efficiency. Reductions in the dose equivalent to the lungs, estimated on the basis of laboratory studies utilising several lung dosimetric models, were only slightly less than the observed reductions in PAECs.


1908 ◽  
Vol 8 (4) ◽  
pp. 536-542 ◽  
Author(s):  
Herbert Edmeston Watson

In a recent paper by Miss Chick on “The Laws of Disinfection”, it was pointed out that disinfection of bacteria is strictly analogous to a chemical reaction in which individual bacteria play the part of molecules. Thus, if n be the number of bacteria present at any time t during dis-infection, , where K is a constant. Also, if K1, K2 are these constants for two different temperatures is also constant, i.e. Arrhenius' formula for the temperature coefficient of chemical reactions holds good in the case of bacteria as well. In addition to this, it was found that the relation between the concentration of the disinfectant and the time of disinfection (that is, the time required to reduce the original number of bacteria by a given percentage) might abe approximately expressed by the empirical lawwhere C is the concentration at time t.


1983 ◽  
Vol 4 ◽  
pp. 300-300
Author(s):  
T. H. Jacka ◽  
W. F. Budd

For the calculation of rates of closure of tunnels or bore holes in ice, the use of a flow law relation based on secondary or minimum creep rates necessarily underestimates closure rates, particularly for large strains where much higher tertiary creep rates develop. Long-term laboratory studies have shown that the change in strain-rate from primary to secondary or minimum and to an approximately constant tertiary stage is associated with recrystallization and the development of strong crystal-orientation fabrics which are dependent on the stress configuration, but not appreciably on crystal size. For bore holes, tunnels or cavities constructed in ice, initial rates of closure decrease, in primary creep, to a minimum value (at about 1% strain) dependent on stress and temperature. From this time, increasing strain-rates occur, analogous to the results obtained from the laboratory studies.A 25-year record of closure of a tunnel at about 30 in depth at site S2 on Law Dome, Antarctica, illustrates the application of the laboratory-derived relations. Comparison between the results of deformation from bore holes, tunnels and laboratory tests, comprising various stress configurations, under similar conditions of stress and temperature, indicates that the strain-rates are compatible when considered as a function of total strain.


1989 ◽  
Vol 61 (2) ◽  
pp. 269-282 ◽  
Author(s):  
S. Kuwada ◽  
R. Batra ◽  
T. R. Stanford

1. We studied the effects of sodium pentobarbital on 22 neurons in the inferior colliculus (IC) of the rabbit. We recorded changes in the sensitivity of these neurons to monaural stimulation and to ongoing interaural time differences (ITDs). Monaural stimuli were tone bursts at or near the neuron's best frequency. The ITD was varied by delivering tones that differed by 1 Hz to the two ears, resulting in a 1-Hz binaural beat. 2. We assessed a neuron's ITD sensitivity by calculating three measures from the responses to binaural beats: composite delay, characteristic delay (CD), and characteristic phase (CP). To obtain the composite delay, we first derived period histograms by averaging, showing the response at each stimulating frequency over one period of the beat frequency. Second, the period histograms were replotted as a function of their equivalent interaural delay and then averaged together to yield the composite delay curve. Last, we calculated the composite peak or trough delay by fitting a parabola to the peak or trough of this composite curve. The composite delay curve represents the average response to all frequencies within the neuron's responsive range, and the peak reflects the interaural delay that produces the maximum response. The CD and CP were estimated from a weighted fit of a regression line to the plot of the mean interaural phase of the response versus the stimulating frequency. The slope and phase intercept of this regression line yielded estimates of CD and CP, respectively. These two quantities are thought to reflect the mechanism of ITD sensitivity, which involves the convergence of phase-locked inputs on a binaural cell. The CD estimates the difference in the time required for the two inputs to travel from either ear to this cell, whereas the CP reflects the interaural phase difference of the inputs at this cell. 3. Injections of sodium pentobarbital at subsurgical dosages (less than 25 mg/kg) almost invariably altered the neuron's response rate, response latency, response pattern, and spontaneous activity. Most of these changes were predictable and consistent with an enhancement of inhibitory influences. For example, if the earliest response was inhibitory, later excitation was usually reduced and latency increased. If the earliest response was excitatory, the level of this excitation was unaltered or slightly enhanced, and changes in latency were minimal. 4. The neuron's response pattern also changed in a predictable way. For example, a response with an inhibitory pause could either change to a response with a longer pause or to a response with an onset only.(ABSTRACT TRUNCATED AT 400 WORDS)


1994 ◽  
Vol 30 (3) ◽  
pp. 265-274 ◽  
Author(s):  
Cheng-Nan Chang ◽  
Ruey-Fang Yu ◽  
Allen C. Chao ◽  
Seishu Tojo

On-line monitoring of the wastewater color and ORP values is used to carry out laboratory studies for collecting data to assist in formulating model equations that can be used to achieve better control and automation of the oxidation process for color removal from textile finish wastewaters. Laboratory studies show that the ORP value, the solution pH, the chemical dosage applied and the resulting color of the treated samples are well correlated by linear relationships. Additionally, the ORP value of the solution that is highly related to the color or the ADMI value of the sample being oxidized can be used as a control parameter of the oxidation process. Nernst equation is modified to generalize the findings and the reaction kinetics can be delineated by Ct = In (ADMIo/ADMIt). The term Ct is a function of ORP, pH and reaction time while ADMIt and ADMI, are the color of the raw wastewater and the treated effluent, respectively. Using the model, the dosage requirement, the color removal efficiency, and the time required to complete the oxidation reaction can be calculated. On-line monitoring and automatic control of the de-coloring process to achieve a more efficient and better cost-effective color removal can be made practical.


2021 ◽  
Vol 12 (3) ◽  
pp. 2252-2264
Author(s):  
Kuldeep Patel ◽  
Richa Dubey ◽  
Shaifali Soni ◽  
Jagdish Chandra Rathi ◽  
Neerupma Dhiman

Cancer is a big issue that affects people all over the world. It develops as a result of uncontrolled cell growth. The interaction between developed ligands and thymine phosphorylation was investigated in this study, which was computationally optimized. The aim of this study was to examine the anticancerous activity of designed ligands in thymine phosphorylation (PDB ID: 1UOU) in order to minimize the cost and time required to develop a novel anticancer drug with minimal side effects. All the designed ligands showed mild to excellent binding with proteins. Most of the ligands exhibited better interaction compared to reference compound Tamoxifen with pdb files. Some of the designed ligands among (1-7) in qunoline derivatives and (1-5) in Chalcone derivatives showed excellent docking scores with PDB file (1UOU) of thymine phosphorylation. All the designed ligands and Zinc databases were docked with 1UOU PDB files of protein, and it was found that out of twenty-five designed ligands in Qunoline series, ligand 25 showed the best binding (docking score −8.268) with 1UOU PDB of protein thymine phosphorylation. And that out of ten designed ligands in Chalcone series, ligand K1 showed the best binding (docking score −9.433) with 1UOU PDB of protein thymine phosphorylation. Docked ligand cavity of ligand ku 25 in qunoline series and K 9 in Chalcone series showed important hydrophobic/non-polar residues such as Ile199, Ile316, Trp119, Phe168, Ile198, Cys172, Tyr188, Tyr398, Tyr435, Phe343, Tyr60, Leu328, Leu171, and showed pi-pi interaction with Tyr326. Further wet laboratory studies are continued in our laboratory to confirm and find out the efficiency and activity of target compounds.


1983 ◽  
Vol 4 ◽  
pp. 300 ◽  
Author(s):  
T. H. Jacka ◽  
W. F. Budd

For the calculation of rates of closure of tunnels or bore holes in ice, the use of a flow law relation based on secondary or minimum creep rates necessarily underestimates closure rates, particularly for large strains where much higher tertiary creep rates develop. Long-term laboratory studies have shown that the change in strain-rate from primary to secondary or minimum and to an approximately constant tertiary stage is associated with recrystallization and the development of strong crystal-orientation fabrics which are dependent on the stress configuration, but not appreciably on crystal size. For bore holes, tunnels or cavities constructed in ice, initial rates of closure decrease, in primary creep, to a minimum value (at about 1% strain) dependent on stress and temperature. From this time, increasing strain-rates occur, analogous to the results obtained from the laboratory studies. A 25-year record of closure of a tunnel at about 30 in depth at site S2 on Law Dome, Antarctica, illustrates the application of the laboratory-derived relations. Comparison between the results of deformation from bore holes, tunnels and laboratory tests, comprising various stress configurations, under similar conditions of stress and temperature, indicates that the strain-rates are compatible when considered as a function of total strain.


1997 ◽  
Vol 161 ◽  
pp. 179-187
Author(s):  
Clifford N. Matthews ◽  
Rose A. Pesce-Rodriguez ◽  
Shirley A. Liebman

AbstractHydrogen cyanide polymers – heterogeneous solids ranging in color from yellow to orange to brown to black – may be among the organic macromolecules most readily formed within the Solar System. The non-volatile black crust of comet Halley, for example, as well as the extensive orangebrown streaks in the atmosphere of Jupiter, might consist largely of such polymers synthesized from HCN formed by photolysis of methane and ammonia, the color observed depending on the concentration of HCN involved. Laboratory studies of these ubiquitous compounds point to the presence of polyamidine structures synthesized directly from hydrogen cyanide. These would be converted by water to polypeptides which can be further hydrolyzed to α-amino acids. Black polymers and multimers with conjugated ladder structures derived from HCN could also be formed and might well be the source of the many nitrogen heterocycles, adenine included, observed after pyrolysis. The dark brown color arising from the impacts of comet P/Shoemaker-Levy 9 on Jupiter might therefore be mainly caused by the presence of HCN polymers, whether originally present, deposited by the impactor or synthesized directly from HCN. Spectroscopic detection of these predicted macromolecules and their hydrolytic and pyrolytic by-products would strengthen significantly the hypothesis that cyanide polymerization is a preferred pathway for prebiotic and extraterrestrial chemistry.


Author(s):  
Charles TurnbiLL ◽  
Delbert E. Philpott

The advent of the scanning electron microscope (SCEM) has renewed interest in preparing specimens by avoiding the forces of surface tension. The present method of freeze drying by Boyde and Barger (1969) and Small and Marszalek (1969) does prevent surface tension but ice crystal formation and time required for pumping out the specimen to dryness has discouraged us. We believe an attractive alternative to freeze drying is the critical point method originated by Anderson (1951; for electron microscopy. He avoided surface tension effects during drying by first exchanging the specimen water with alcohol, amy L acetate and then with carbon dioxide. He then selected a specific temperature (36.5°C) and pressure (72 Atm.) at which carbon dioxide would pass from the liquid to the gaseous phase without the effect of surface tension This combination of temperature and, pressure is known as the "critical point" of the Liquid.


Author(s):  
Carolyn Nohr ◽  
Ann Ayres

Texts on electron diffraction recommend that the camera constant of the electron microscope be determine d by calibration with a standard crystalline specimen, using the equation


Sign in / Sign up

Export Citation Format

Share Document