Effects of different surface finishing protocols for zirconia on surface roughness and bacterial biofilm formation

ABSTRACTLong term clinical success of modern dental ceramics depends on a number of factors. These factors include the physical properties of the material, the laboratory fabrication process, the laboratory fabrication technique and clinical procedures that may damage these brittle materials. The surface structure and composition of a dental restorative material influences the initial bacterial adhesion, and a rough material surface will accumulate more plaque. Biomaterials for the restoration of oral function are prone to biofilm formation, affecting oral health. An up to date online database search was performed using the keywords “bacterial biofilm,” “ceramic strength,” “dental ceramics” and “surface roughness.” The searches were performed on Medline/PubMed, and Scopus and the cross references were further searched in the databases to verify further studies. The relevant papers included original articles, systemic reviews, case reports and letters to the editor. All the papers were reviewed, and the most relevant studies were selected for referencing by the author. The aim of this paper is to highlight the influence of rougher surfaces on the ceramic strength and plaque accumulation leading to bacterial biofilm formation.

Download Full-text

Bacterial biofilm behavior in water-supply lines of dental units

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100124811 ◽

1992 ◽

Vol 50 (1) ◽

pp. 882-883

Author(s):

B.D. Tall ◽

K.S. George ◽

R. T. Gray ◽

H.N. Williams

Keyword(s):

Water Supply ◽

Medical Devices ◽

Biofilm Formation ◽

Bacterial Biofilm

Studies of bacterial behavior in many environments have shown that most organisms attach to surfaces, forming communities of microcolonies called biofilms. In contaminated medical devices, biofilms may serve both as reservoirs and as inocula for the initiation of infections. Recently, there has been much concern about the potential of dental units to transmit infections. Because the mechanisms of biofilm formation are ill-defined, we investigated the behavior and formation of a biofilm associated with tubing leading to the water syringe of a dental unit over a period of 1 month.

Download Full-text

Faculty Opinions recommendation of Extracellular DNA required for bacterial biofilm formation.

Faculty Opinions – Post-Publication Peer Review of the Biomedical Literature ◽

10.3410/f.1004647.85916 ◽

2002 ◽

Author(s):

Terrance Beveridge

Keyword(s):

Biofilm Formation ◽

Bacterial Biofilm ◽

Extracellular Dna

Download Full-text

Inhibition of Bacterial Biofilm Formation by Phytotherapeutics with Focus on Overcoming Antimicrobial Resistance

Current Pharmaceutical Design ◽

10.2174/1381612826666200212121710 ◽

2020 ◽

Vol 26 (24) ◽

pp. 2807-2816 ◽

Cited By ~ 1

Author(s):

Yun Su Jang ◽

Tímea Mosolygó

Keyword(s):

Antimicrobial Resistance ◽

Biofilm Formation ◽

Antimicrobial Agents ◽

Bacterial Biofilm ◽

Experimental Investigations ◽

Resistant Bacteria ◽

Salmonella Spp ◽

Food Borne ◽

High Prevalence ◽

Scientific Attention

: Bacteria within biofilms are more resistant to antibiotics and chemical agents than planktonic bacteria in suspension. Treatment of biofilm-associated infections inevitably involves high dosages and prolonged courses of antimicrobial agents; therefore, there is a potential risk of the development of antimicrobial resistance (AMR). Due to the high prevalence of AMR and its association with biofilm formation, investigation of more effective anti-biofilm agents is required. : From ancient times, herbs and spices have been used to preserve foods, and their antimicrobial, anti-biofilm and anti-quorum sensing properties are well known. Moreover, phytochemicals exert their anti-biofilm properties at sub-inhibitory concentrations without providing the opportunity for the emergence of resistant bacteria or harming the host microbiota. : With increasing scientific attention to natural phytotherapeutic agents, numerous experimental investigations have been conducted in recent years. The present paper aims to review the articles published in the last decade in order to summarize a) our current understanding of AMR in correlation with biofilm formation and b) the evidence of phytotherapeutic agents against bacterial biofilms and their mechanisms of action. The main focus has been put on herbal anti-biofilm compounds tested to date in association with Staphylococcus aureus, Pseudomonas aeruginosa and food-borne pathogens (Salmonella spp., Campylobacter spp., Listeria monocytogenes and Escherichia coli).

Download Full-text

Antibiotics Application Strategies to Control Biofilm Formation in Pathogenic Bacteria

Current Pharmaceutical Biotechnology ◽

10.2174/1389201020666191112155905 ◽

2020 ◽

Vol 21 (4) ◽

pp. 270-286 ◽

Cited By ~ 2

Author(s):

Fazlurrahman Khan ◽

Dung T.N. Pham ◽

Sandra F. Oloketuyi ◽

Young-Mog Kim

Keyword(s):

Biofilm Formation ◽

Pathogenic Bacteria ◽

Extracellular Polymeric Substances ◽

Quorum Quenching ◽

Resistance Mechanisms ◽

Bacterial Biofilm ◽

Bacterial Cells ◽

High Concentration ◽

Biofilm Inhibition ◽

Abiotic Surfaces

Background: The establishment of a biofilm by most pathogenic bacteria has been known as one of the resistance mechanisms against antibiotics. A biofilm is a structural component where the bacterial community adheres to the biotic or abiotic surfaces by the help of Extracellular Polymeric Substances (EPS) produced by bacterial cells. The biofilm matrix possesses the ability to resist several adverse environmental factors, including the effect of antibiotics. Therefore, the resistance of bacterial biofilm-forming cells could be increased up to 1000 times than the planktonic cells, hence requiring a significantly high concentration of antibiotics for treatment. Methods: Up to the present, several methodologies employing antibiotics as an anti-biofilm, antivirulence or quorum quenching agent have been developed for biofilm inhibition and eradication of a pre-formed mature biofilm. Results: Among the anti-biofilm strategies being tested, the sub-minimal inhibitory concentration of several antibiotics either alone or in combination has been shown to inhibit biofilm formation and down-regulate the production of virulence factors. The combinatorial strategies include (1) combination of multiple antibiotics, (2) combination of antibiotics with non-antibiotic agents and (3) loading of antibiotics onto a carrier. Conclusion: The present review paper describes the role of several antibiotics as biofilm inhibitors and also the alternative strategies adopted for applications in eradicating and inhibiting the formation of biofilm by pathogenic bacteria.

Download Full-text

Surface Immobilization of Nano-Silver on Polymeric Medical Devices to Prevent Bacterial Biofilm Formation

Pathogens ◽

10.3390/pathogens8030093 ◽

2019 ◽

Vol 8 (3) ◽

pp. 93 ◽

Cited By ~ 8

Author(s):

Riau ◽

Aung ◽

Setiawan ◽

Yang ◽

Yam ◽

...

Keyword(s):

Medical Devices ◽

Biofilm Formation ◽

Culture Media ◽

Silver Ions ◽

Bacterial Biofilm ◽

Surface Immobilization ◽

Nano Silver ◽

Gram Positive Bacteria ◽

Tissue Microenvironment

: Bacterial biofilm on medical devices is difficult to eradicate. Many have capitalized the anti-infective capability of silver ions (Ag+) by incorporating nano-silver (nAg) in a biodegradable coating, which is then laid on polymeric medical devices. However, such coating can be subjected to premature dissolution, particularly in harsh diseased tissue microenvironment, leading to rapid nAg clearance. It stands to reason that impregnating nAg directly onto the device, at the surface, is a more ideal solution. We tested this concept for a corneal prosthesis by immobilizing nAg and nano-hydroxyapatite (nHAp) on poly(methyl methacrylate), and tested its biocompatibility with human stromal cells and antimicrobial performance against biofilm-forming pathogens, Pseudomonas aeruginosa and Staphylococcus aureus. Three different dual-functionalized substrates—high Ag (referred to as 75:25 HAp:Ag); intermediate Ag (95:5 HAp:Ag); and low Ag (99:1 HAp:Ag) were studied. The 75:25 HAp:Ag was effective in inhibiting biofilm formation, but was cytotoxic. The 95:5 HAp:Ag showed the best selectivity among the three substrates; it prevented biofilm formation of both pathogens and had excellent biocompatibility. The coating was also effective in eliminating non-adherent bacteria in the culture media. However, a 28-day incubation in artificial tear fluid revealed a ~40% reduction in Ag+ release, compared to freshly-coated substrates. The reduction affected the inhibition of S. aureus growth, but not the P. aeruginosa. Our findings suggest that Ag+ released from surface-immobilized nAg diminishes over time and becomes less effective in suppressing biofilm formation of Gram-positive bacteria, such as S. aureus. This advocates the coating, more as a protection against perioperative and early postoperative infections, and less as a long-term preventive solution.

Download Full-text

Biofilm inhibition and bactericidal activity of NiTi alloy coated with graphene oxide/silver nanoparticles via electrophoretic deposition

Scientific Reports ◽

10.1038/s41598-021-92340-7 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Sirapat Pipattanachat ◽

Jiaqian Qin ◽

Dinesh Rokaya ◽

Panida Thanyasrisung ◽

Viritpon Srimaneepong

Keyword(s):

Surface Roughness ◽

Silver Nanoparticles ◽

Graphene Oxide ◽

Electrophoretic Deposition ◽

Biofilm Formation ◽

Niti Alloy ◽

Surface Characteristics ◽

Dependent Manner ◽

Biofilm Inhibition ◽

Coating Time

AbstractBiofilm formation on medical devices can induce complications. Graphene oxide/silver nanoparticles (GO/AgNPs) coated nickel-titanium (NiTi) alloy has been successfully produced. Therefore, the aim of this study was to determine the anti-bacterial and anti-biofilm effects of a GO/AgNPs coated NiTi alloy prepared by Electrophoretic deposition (EPD). GO/AgNPs were coated on NiTi alloy using various coating times. The surface characteristics of the coated NiTi alloy substrates were investigated and its anti-biofilm and anti-bacterial effect on Streptococcus mutans biofilm were determined by measuring the biofilm mass and the number of viable cells using a crystal violet assay and colony counting assay, respectively. The results showed that although the surface roughness increased in a coating time-dependent manner, there was no positive correlation between the surface roughness and the total biofilm mass. However, increased GO/AgNPs deposition produced by the increased coating time significantly reduced the number of viable bacteria in the biofilm (p < 0.05). Therefore, the GO/AgNPs on NiTi alloy have an antibacterial effect on the S. mutans biofilm. However, the increased surface roughness does not influence total biofilm mass formation (p = 0.993). Modifying the NiTi alloy surface using GO/AgNPs can be a promising coating to reduce the consequences of biofilm formation.

Download Full-text

Peptidomimetic Polyurethanes Inhibit Bacterial Biofilm Formation and Disrupt Surface Established Biofilms

Journal of the American Chemical Society ◽

10.1021/jacs.1c02324 ◽

2021 ◽

Author(s):

Apoorva Vishwakarma ◽

Francis Dang ◽

Allison Ferrell ◽

Hazel A. Barton ◽

Abraham Joy

Keyword(s):

Biofilm Formation ◽

Bacterial Biofilm

Download Full-text

Thiazole Analogues of the Marine Alkaloid Nortopsentin as Inhibitors of Bacterial Biofilm Formation

Molecules ◽

10.3390/molecules26010081 ◽

2020 ◽

Vol 26 (1) ◽

pp. 81

Author(s):

Anna Carbone ◽

Stella Cascioferro ◽

Barbara Parrino ◽

Daniela Carbone ◽

Camilla Pecoraro ◽

...

Keyword(s):

Biofilm Formation ◽

Bacterial Biofilm ◽

Thiazole Derivatives ◽

Gram Positive ◽

Lead Compounds ◽

New Class ◽

Marked Selectivity ◽

Global Threat ◽

New Compounds ◽

Reference Strains

Anti-virulence strategy is currently considered a promising approach to overcome the global threat of the antibiotic resistance. Among different bacterial virulence factors, the biofilm formation is recognized as one of the most relevant. Considering the high and growing percentage of multi-drug resistant infections that are biofilm-mediated, new therapeutic agents capable of counteracting the formation of biofilms are urgently required. In this scenario, a new series of 18 thiazole derivatives was efficiently synthesized and evaluated for its ability to inhibit biofilm formation against the Gram-positive bacterial reference strains Staphylococcus aureus ATCC 25923 and S. aureus ATCC 6538 and the Gram-negative strain Pseudomonas aeruginosa ATCC 15442. Most of the new compounds showed a marked selectivity against the Gram-positive strains. Remarkably, five compounds exhibited BIC50 values against S. aureus ATCC 25923 ranging from 1.0 to 9.1 µM. The new compounds, affecting the biofilm formation without any interference on microbial growth, can be considered promising lead compounds for the development of a new class of anti-virulence agents.

Download Full-text