Self Priming Low Stress Aqueous Developable Benzocyclobutene (AD-BCB) Photodielectric Materials for Advanced Wafer Level Packaging

2015 ◽  
Vol 2015 (DPC) ◽  
pp. 000679-000697
Author(s):  
Hua Dong ◽  
Greg Prokopowicz ◽  
Bob Barr ◽  
Joe Lachowski ◽  
Jeff Calvert ◽  
...  
Keyword(s):  
Silicon Oxide ◽  
High Reliability ◽  
Semiconductor Industry ◽  
Dielectric Materials ◽  
Film Stress ◽  
Wafer Level ◽  
Adhesion Promoter ◽  
Molding Compound ◽  
Wafer Level Packaging ◽  
New Formulation

As the semiconductor industry drives to more functionality in smaller and lighter devices, it requires new materials to meet the changing requirements of new and more advanced chip designs and packaging solutions. Photoimagable polymeric dielectric materials are a key building block for wafer level packaging (WLP); these include polyimide (PI), polybenzoxazole (PBO), acrylics, silicones, epoxy-phenolics and benzocyclobutene (BCB). Because of low copper diffusion, low temperature curing, high reliability and low moisture adsorption, BCB was the platform chosen for modification. In this work, we will focus on the development of self priming, low stress, aqueous developable version of BCB, known as AD-BCB. This new photodielectric material has improved mechanical properties of <25MPa film stress value and >28% elongation while maintaining good post develop and post cure adhesion on various substrates including silicon, silicon oxide, silicon nitride, copper, aluminum and epoxy molding compound. Elongation is significantly increased for this positive tone, aqueous developable, photodielectric materials, while film stress and wafer bow are significantly reduced. In addition, this new formulation is self priming and does not require a spin-on adhesion promoter. The material can be cured at as low as 200 °C with lithographic feature size of <10 μm and dielectric constant of 3.0.

Robust Reliability Performance of Large size eWLB (Fan-out WLP)

2013 ◽  
Vol 2013 (DPC) ◽  
pp. 001438-001457 ◽  
Author(s):  
Seung Wook Yoon
Keyword(s):  
Form Factor ◽  
Dielectric Materials ◽  
Structural Defects ◽  
Temperature Cycle ◽  
Wafer Level ◽  
Component Level ◽  
Wafer Level Packaging ◽  
Large Size ◽  
Reliability Performance ◽  
Robust Reliability

With reducing form-factor and functional integration of mobile devices, Wafer Level Packaging (WLP) is attractive packaging technology with many advantages in comparison to standard Ball Grid Array (BGA) packages. With the advancement of various fan-out WLP, it is more optimal and promising solution compared to fan-in WLP, because it can offer greater flexibility in design of more IOs, multi-chips, heterogeneous integration and 3D SiP. eWLB (embedded wafer level packaging) is a type of fan-out WLP enabling applications that require smaller form-factor, excellent heat dissipations, thin package profile as it has the potential to evolve in various configurations with proven manufacturing capacity and production yield. This paper discusses the recent advancements of robust reliability performance of large size eWLB. It will also highlight the recent achievement of enhanced component level reliability with advanced dielectric materials. After a parametric study and mechanical simulations, new advanced materials were selected and applied to eWLB. Standard JEDEC tests were carried out to investigate component level reliability of large size (9x9~14x14mm2) test vehicles and both destructive/non-destructive analysis were performed to investigate potential structural defects. Daisychain test vehicles were also tested for drop and TCoB (Temperature Cycle on Board) reliability performance in industry standard test conditions. Besides, this paper will also present a study of package level warpage behaviour with Thermo-Moire measurement.

Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution Layers (RDLs)

2017 ◽  
Vol 14 (4) ◽  
pp. 123-131 ◽  
Author(s):  
John Lau ◽  
Ming Li ◽  
Nelson Fan ◽  
Eric Kuah ◽  
Zhang Li ◽  
...  
Keyword(s):  
Thin Layer ◽  
Glass Wafer ◽  
Front Side ◽  
Wafer Level ◽  
Molding Compound ◽  
The Third ◽  
Wafer Level Packaging ◽  
Die Attach ◽  
Solder Balls ◽  
Test Package

This study is for fan-out wafer-level packaging with chip-first (die face-up) formation. Chips with Cu contact-pads on the front side and a die attach film on the backside are picked and placed face-up on a temporary-glass-wafer carrier with a thin layer of light-to-heat conversion material. It is followed by compression molding with an epoxy molding compound (EMC) and a post-mold cure on the reconstituted wafer carrier and then backgrinding the molded EMC to expose the Cu contact-pads of the chips. The next step is to build up the redistribution layers (RDLs) from the Cu contact-pads and then mount the solder balls. This is followed by the debonding of the carrier with a laser and then the dicing of the whole reconstituted wafer into individual packages. A 300-mm reconstituted wafer with a package/die ratio = 1.8 and a die-top EMC cap = 100 μm has also been fabricated (a total of 325 test packages on the reconstituted wafer). This test package has three RDLs; the line width/spacing of the first RDL is 5 μm/5 μm, of the second RDL is 10 μm/10 μm, and of the third RDL is 15 μm/15 μm. The dielectric layer of the RDLs is fabricated with a photosensitive polyimide and the conductor layer of the RDLs is fabricated by electrochemical Cu deposition (ECD).

Warpage Characterization of Molded Wafer for Fan-Out Wafer-Level Packaging

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Hsien-Chie Cheng ◽  
Yan-Cheng Liu
Keyword(s):  
Measurement Data ◽  
Mechanical Analysis ◽  
Volumetric Shrinkage ◽  
Heat Of Reaction ◽  
Wafer Level ◽  
Molding Process ◽  
Scanning Calorimetry ◽  
Molding Compound ◽  
Wafer Level Packaging

Abstract This study presents a comprehensive assessment of the process-induced warpage of molded wafer for chip-first, face-down fan-out wafer-level packaging (FOWLP) during the fan-out fabrication process. A process-dependent simulation methodology is introduced, which integrates nonlinear finite element (FE) analysis and element death-birth technique. The effects of the cure-dependent volumetric shrinkage, geometric nonlinearity, and gravity loading on the process-induced warpage are examined. The study starts from experimental characterization of the temperature-dependent material properties of the applied liquid type epoxy molding compound (EMC) system through dynamic mechanical analysis (DMA) and thermal mechanical analysis. Furthermore, its cure state (heat of reaction and degree of cure (DOC)) during the compression molding process (CMP) is measured by differential scanning calorimetry (DSC) tests. Besides, the cure dependent-volumetric (chemical) shrinkages of the EMC system after the in-mold cure (IMC) and postmold cure (PMC) are experimentally determined by which the volumetric shrinkage at the gelation point is predicted through a linear extrapolation approach. To demonstrate the effectiveness of the proposed theoretical model, the prediction results are compared against the inline warpage measurement data. One possible cause of the asymmetric/nonaxisymmetric warpage is also addressed. Finally, the influences of some geometric dimensions on the warpage of the molded wafer are identified through parametric analysis.

SiP(System in Package) Solutions with Wafer Level Packaging Technology

2011 ◽  
Vol 2011 (DPC) ◽  
pp. 002226-002253 ◽  
Author(s):  
In Soo Kang ◽  
Jong Heon (Jay) Kim
Keyword(s):  
Embedded System ◽  
High Performance ◽  
Low Cost ◽  
Wafer Level ◽  
Molding Compound ◽  
Wafer Level Packaging ◽  
Ic Packaging ◽  
Chip Size ◽  
Bonding Technology ◽  
Small Form Factor

In mobile application, the WLP technology has been developing to make whole package size almost same as chip size. However, the I/O per chip unit area has increased so that it gets difficult to realize ideal pad pitch for better reliability. Recently, to achieve the thin and small size, high performance and low cost semiconductor package, Embedding Die and Fanout Technologies have been suggested and developed based on wafer level processing. In this work, as a solution of system in package, wafer level embedded package and fanout technology will be reviewed. Firstly, Wafer level embedded System in Package (WL-eSiP) which has daughter chip (small chip) embedded inside mother chip (bigger chip) without any special substrate has been suggested and developed. To realize wafer level embedded system in package (WL-eSiP), wafer level based new processes like wafer level molding for underfilling and encapsulation by molding compound without any special substrate have been applied and developed, including high aspect ratio Cu bumping, mold thinning and chip-to-wafer flipchip bonding. Secondly, Fan-out Package is considered as alternative package structure which means merged package structure of WLCSP (wafer level chip size package) and PCB process. We can make IC packaging widen area for SIP(System in Package) or 3D package. In addition, TSV and IPD are key enabling technology to meet market demands because TSV interconnection can provide wider bandwidth and high transmission speed due to vertical one compared to wire bonding technology and IPD can provide higher performance, more area saving to be assembled and small form factor compared to discrete passive components.

Patterned Permanent Bonding of Benzocyclobutene Based Dielectric Materials for Advanced Wafer Level Packaging

2014 ◽  
Vol 2014 (DPC) ◽  
pp. 000886-000912
Author(s):  
Jong-Uk Kim ◽  
Anupam Choubey ◽  
Rosemary Bell ◽  
Hua Dong ◽  
Michael Gallagher ◽  
...  
Keyword(s):  
Wafer Bonding ◽  
Dielectric Materials ◽  
Wafer Level ◽  
Wafer Level Packaging ◽  
Integration Schemes ◽  
Device Reliability ◽  
Package Size ◽  
Microelectronics Industry ◽  
Improve Device ◽  
Joining Process

The microelectronics industry is being continually challenged to decrease package size, lower power consumption and improve device performance for the mobile communication and server markets. In order to keep pace with these requirements, device manufacturers and assembly companies are focused on developing 3D-TSV integration schemes that will require stacking of 50 um thinned wafers with gaps of 15 microns or less. While conventional underfill approaches have been demonstrated for chip to chip and chip to wafer schemes, new materials and processes are required for wafer to wafer bonding given the target bondline and wafer handling issues. Photopatternable, low temperature curable dielectrics offer a potential solution to solve the issues by eliminating the need for flow and material entrapment during the joining process. This should result in a simplified bonding process that enables wafer to wafer bonding with improved device reliability. In this work, we will focus on validating the critical steps including patterning and bonding that are required to demonstrate the utility of this process using an aqueous developable benzocyclobutene based photodielectric material.

Optimization of laser release layer, glass carrier, and organic build-up layer to enable RDL-first fan-out wafer-level packaging

2016 ◽  
Vol 2016 (1) ◽  
pp. 000190-000195 ◽  
Author(s):  
Alvin Lee ◽  
Jay Su ◽  
Baron Huang ◽  
Ram Trichur ◽  
Dongshun Bai ◽  
...  
Keyword(s):  
High Speed ◽  
Process Integration ◽  
Cost Effective ◽  
Wafer Level ◽  
Molding Compound ◽  
Fine Line ◽  
Glass Substrates ◽  
Laser Ablation Process ◽  
Wafer Level Packaging ◽  
Increasing Demand

Abstract With increasing demand for mobile devices to be lighter and thinner and consume less power while operating at high speed and high bandwidth, many equipment suppliers and assembly participants have invested great efforts to achieve fine-line fan-out wafer-level packaging (FOWLP). However, the inherent warp of reconstituted wafers, which can contribute to poor die placement accuracy and/or delamination at the interface of the build-up layer and carrier, remains a major challenge. In this study, the interactions among laser release layer, glass carrier, and build-up layer were evaluated for optimization of redistribution layer (RDL)–first FOWLP as a foundation to move toward fine-line FOWLP. In this study, a series of experiments incorporating glass carrier, laser release layer, and build-up layers were carried out to determine the optimal setup for RDL-first FOWLP. First, glass carriers (300 mm × 300 mm × 0.7 mm) with coefficients of thermal expansion of 3 and 8 ppm/°C were treated with 150-nm laser release layers. After deposition of 0.1 μm of sacrificial material on the glass carrier, 8-μm build-up layers were coated and patterned by lithography to electroplate Cu interconnections with a density of approximately 10% of the surface area. Subsequent to die attachment, molding compound was applied on top to form a 200-μm protective overcoat. The reconstituted wafer was then separated from the glass carrier through a laser ablation process using a 308-nm laser to complete the design of experiments (DOE). An experiment to study the correlation of glass carrier, laser release layer, build-up layers, and molding compound in RDL-first FOWLP processes is discussed to address full process integration on 300-mm glass substrates. The combination of glass carrier, laser release layer, build-up layer, and molding compound will pave the way for realizing cost-effective RDL-first FOWLP on panel-size substrates.

300mm Large Scale eWLB(embedded Wafer Level BGA) : Cost Effective Solution with Performance

2011 ◽  
Vol 2011 (DPC) ◽  
pp. 001046-001070
Author(s):  
Seung Wook Yoon ◽  
Yaojian Lin ◽  
Pandi C. Marimuthu ◽  
Yeong J. Lee
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Cost Effective ◽  
Batch Process ◽  
Dielectric Materials ◽  
Design Parameters ◽  
Wafer Level ◽  
Molding Compound ◽  
Package Size ◽  
Chip Size

Demand for Wafer Level Package (WLP) is being driven by the need to shrink package size and height, simplify the supply chain and provide a lower overall cost by using the infrastructure of a batch process. The increasing demand for new and more advanced electronic products with smaller form factor, superior functionality and performance is driving the integration of functionality into the third dimension. There are some restrictions in possible applications for fan-in WLPs since global chip trends tend toward smaller chip areas with an increasing number of interconnects. The shrinkage of the pitches and pads at the chip to package interface is happening much faster than the shrinkage at the package to board interface. This interconnection gap requires fan-out packaging, where the package size is larger than the chip size in order to provide a sufficient area to accommodate the 2nd level interconnects. eWLB is a type of fan-out WLP that has the potential to realize any number of interconnects with standard pitches at any shrink stage of the wafer node technology. 200mm eWLB is in HVM from industry last three years and there was need to move 300mm for scaling-up and low-cost solutions. This paper will highlight some of the recent advancements in large scale 300mm eWLB development. Compared to 200mm case, 300mm has more warpage and process issues due to its area increase. Thermo-mechanical simulation shows 100~150% more warpage with 300mm compared to 200mm. So various design parameters were studied to optimized warpage, such as dielectric materials and thickness, molding compound thickness etc. This paper presents study of process optimization for 300mm eWLB and mechanical characterization, reliability data including component/board level, challenges encountered and overcome, and future steps of scalability for higher throughput and manufacturability.

Low Temperature Curable PI/PBO for Advanced Packaging

2017 ◽  
Vol 2017 (DPC) ◽  
pp. 1-15 ◽  
Author(s):  
Daisaku Matsukawa ◽  
Tadamitsu Nakamura ◽  
Tetsuya Enomoto ◽  
Noriyuki Yamazaki ◽  
Masayuki Ohe ◽  
...  
Keyword(s):  
Low Temperature ◽  
Chemical Resistance ◽  
High Reliability ◽  
Dielectric Materials ◽  
The Novel ◽  
Next Generation ◽  
Wafer Level ◽  
High Chemical ◽  
High Chemical Resistance ◽  
Advanced Packaging

Photo-definable polyimides (PI) and polybenzoxazoles (PBO) have been widely used as dielectrics for re-distribution layers in wafer level chip size packages (WL-CSP). These materials can simplify the manufacturing process and ensure high reliability owing to their good mechanical properties and high thermal stability. For next generation electronic components fabricated by utilizing advanced packaging technologies such as 3D-stacking using TSV, package-on-package, fan-out WL-CSP etc., the most important requirements for dielectric materials are high lithographic performance, high adhesion to Cu RDL, high chemical resistance and low temperature curability. In this paper, we will report on our novel low temperature (<200C) curable PBO and PI. A novel alkaline positive tone PBO was developed by re-designing key components of the formulation to enhance lithographic performance, Cu adhesion and chemical resistance. It was found that the new PBO material showed higher lithographic performance than conventional PBOs due to its high dissolution contrast and which resulted in a resolution of 2micron (L/S) with a 7μm cured thickness and 3micron (L/S) with a 15micron cured thickness, respectively. This material also produced strong Cu adhesion and high chemical resistance at curing temperatures <200C with no delamination from the Cu RDL being observed after a 168hr Pressure Cooker Test (PCT). Furthermore, the new formulation showed high TCT resistance due to its high elongation below 0C. In addition, a novel solvent negative tone PI was also developed by incorporating a cross-linker to accelerate low temperature curability as well a photo-initiator to improve lithographic properties. As a result, the novel PI when cured at 175C for 1hr showed high Cu adhesion after 168hr PCT as well as high film properties. The new PI also showed excellent lithographic properties with a resolution of 6micron (L/S). Furthermore, the low temperature curable PI and PBO materials were used as dielectrics to fabricate WL-CSPs for both chip and board level reliability testing. The test results indicated that both the novel PBO and PI showed excellent reliability after thermal cycling (TCT) due to the significant improvements made to Cu adhesion and chemical resistance. These materials are expected to be promising for next generation WLP applications. Details are described in the presentation.

Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution-Layers (RDLs)

2017 ◽  
Vol 2017 (1) ◽  
pp. 000576-000583 ◽  
Author(s):  
John Lau ◽  
Ming Li ◽  
Nelson Fan ◽  
Eric Kuah ◽  
Zhang Li ◽  
...  
Keyword(s):  
Thin Layer ◽  
Glass Wafer ◽  
Front Side ◽  
Wafer Level ◽  
Molding Compound ◽  
The Third ◽  
Wafer Level Packaging ◽  
Die Attach ◽  
Solder Balls ◽  
Test Package

Abstract This study is for fan-out wafer-level packaging (FOWLP) with chip-first (die face-up) formation. The chips with Cu contact-pads on the front-side and a die attach film (DAF) on the backside are picked and placed face-up on a temporary glass wafer carrier with a thin layer of light-to-heat conversion (LTHC) material. It is followed by compression molding with epoxy molding compound (EMC) and post mold cure (PMC) on the reconstituted wafer carrier, and then backgrinding the molded EMC to expose the Cu contact-pads of the chips. The next step is to build up the redistribution layers (RDLs) from the Cu contact-pads and then mount the solder balls. Next comes the de-bonding of the carrier with a laser, and then the dicing of the whole reconstituted wafer into individual packages. A 300mm reconstituted wafer with a package/die ratio = 1.8 and a die-top EMC cap = 100μm has also been fabricated (a total of 325 test packages on the reconstituted wafer.) This test package has three RDLs; the line width/spacing of the first RDL is 5μm/5μm, of the second RDL is 10μm/10μm, and of the third RDL is 15μm/15μm. The dielectric layer of the RDLs is fabricated with a photosensitive polyimide (PI) and the conductor layer of the RDLs is fabricated by electrochemical Cu deposition (ECD).

Sign in / Sign up

Export Citation Format

Share Document