Optimization of laser release layer, glass carrier, and organic build-up layer to enable RDL-first fan-out wafer-level packaging

2016 ◽  
Vol 2016 (1) ◽  
pp. 000190-000195 ◽  
Author(s):  
Alvin Lee ◽  
Jay Su ◽  
Baron Huang ◽  
Ram Trichur ◽  
Dongshun Bai ◽  
...  
Keyword(s):  
High Speed ◽  
Process Integration ◽  
Cost Effective ◽  
Wafer Level ◽  
Molding Compound ◽  
Fine Line ◽  
Glass Substrates ◽  
Laser Ablation Process ◽  
Wafer Level Packaging ◽  
Increasing Demand

Abstract With increasing demand for mobile devices to be lighter and thinner and consume less power while operating at high speed and high bandwidth, many equipment suppliers and assembly participants have invested great efforts to achieve fine-line fan-out wafer-level packaging (FOWLP). However, the inherent warp of reconstituted wafers, which can contribute to poor die placement accuracy and/or delamination at the interface of the build-up layer and carrier, remains a major challenge. In this study, the interactions among laser release layer, glass carrier, and build-up layer were evaluated for optimization of redistribution layer (RDL)–first FOWLP as a foundation to move toward fine-line FOWLP. In this study, a series of experiments incorporating glass carrier, laser release layer, and build-up layers were carried out to determine the optimal setup for RDL-first FOWLP. First, glass carriers (300 mm × 300 mm × 0.7 mm) with coefficients of thermal expansion of 3 and 8 ppm/°C were treated with 150-nm laser release layers. After deposition of 0.1 μm of sacrificial material on the glass carrier, 8-μm build-up layers were coated and patterned by lithography to electroplate Cu interconnections with a density of approximately 10% of the surface area. Subsequent to die attachment, molding compound was applied on top to form a 200-μm protective overcoat. The reconstituted wafer was then separated from the glass carrier through a laser ablation process using a 308-nm laser to complete the design of experiments (DOE). An experiment to study the correlation of glass carrier, laser release layer, build-up layers, and molding compound in RDL-first FOWLP processes is discussed to address full process integration on 300-mm glass substrates. The combination of glass carrier, laser release layer, build-up layer, and molding compound will pave the way for realizing cost-effective RDL-first FOWLP on panel-size substrates.

Temporary Bonding and Debonding Technologies to Enable Innovative Fan-Out Embedded Interposer for High-Density Applications

2015 ◽  
Vol 2015 (1) ◽  
pp. 1-6
Author(s):  
Alvin Lee ◽  
Jay Su ◽  
Xiao Liu ◽  
Yin-Po Hung ◽  
Yu-Min Lin ◽  
...  
Keyword(s):  
Integrated Circuit ◽  
High Speed ◽  
Process Integration ◽  
Dielectric Material ◽  
Wafer Level ◽  
Additive Process ◽  
Bonding Material ◽  
Wafer Level Packaging ◽  
Ic Packaging ◽  
Temporary Bonding

As requirements increase for mobile devices to be lighter and thinner and to operate at high speed and high bandwidth, innovations in wafer-level packaging have evolved to 3-D structures, such as package-on-package (PoP), fan-out integration, and through-silicon-via (TSV) interposer architectures. However, wafer-level packaging is still considered to be costly and slow in throughput due to wafer size limitations. In this study, temporary bonding and debonding processes using mechanical or laser release technologies were applied in the fabrication process of an integrated embedded glass interposer as a foundation for 3-D integrated circuit (IC) packaging on panel-level packaging. Glass interposers having dimensions of 10 mm × 10 mm and a thickness of 120 μm were fabricated. The interposers had through-glass vias (TGVs) 25 μm in diameter and 3000 I/O pads of copper under-bump metallization (UBM) and were designed as a nearly full-array type. The interposers were supported by a temporary bonding material on silicon or glass wafers and embedded by built-up dielectric material on which fan-out redistribution circuit layers were deposited. For forming the pattern of the redistribution layer, a UV laser was used to form 75-μm-diameter blind vias, and conductive interconnections were made by a semi-additive process (SAP) using photolithography and electrolytic copper. The process of building up layers from the glass interposer to form an embedded fan-out interposer can eliminate a joining process required by traditional 2.5-D IC integration. Finally, the embedded fan-out carrier is separated from the glass or silicon wafer through a laser debonding process. An experiment to study the correlation of bonding material and release material with built-up lamination in backside processes will be discussed in this paper to address full process integration on panel-size substrates. The combination of temporary bonding technology with mechanical or laser release technologies will pave the way for realizing cost-effective 3-D IC packaging on panel-level substrates.

Through Silicon Via Technology: Cost effective Cu-TSV Interconnects by EMC3D and Technical Challenges with Cu-TSV

2010 ◽  
Vol 2010 (DPC) ◽  
pp. 000425-000445
Author(s):  
Paul Siblerud ◽  
Rozalia Beica ◽  
Bioh Kim ◽  
Erik Young
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Yield ◽  
Integrated Process ◽  
Wafer Level ◽  
Through Silicon Via ◽  
Wafer Level Packaging ◽  
Current State ◽  
Future Technologies ◽  
Ic Technology

The development of IC technology is driven by the need to increase performance and functionality while reducing size, power and cost. The continuous pressure to meet those requirements has created innovative, small, cost-effective 3-D packaging technologies. 3-D packaging can offer significant advantages in performance, functionality and form factor for future technologies. Breakthrough in wafer level packaging using through silicon via technology has proven to be technologically beneficial. Integration of several key and challenging process steps with a high yield and low cost is key to the general adoption of the technology. This paper will outline the breakthroughs in cost associated with an iTSV or Via-Mid structure in a integrated process flow. Key process technologies enabling 3-D chip:Via formationInsulator, barrier and seed depositionCopper filling (plating),CMPWafer thinningDie to Wafer/chip alignment, bonding and dicing This presentation will investigate these techniques that require interdisciplinary coordination and integration that previously have not been practiced. We will review the current state of 3-D interconnects and the of a cost effective Via-first TSV integrated process.

Journey Toward Process Convergence in TSV Technology

2010 ◽  
Vol 2010 (DPC) ◽  
pp. 001282-001321
Author(s):  
Sesh Ramaswami ◽  
John Dukovic
Keyword(s):  
Process Integration ◽  
Semiconductor Industry ◽  
Rapid Development ◽  
Chemical Mechanical Planarization ◽  
Cost Effective ◽  
Superior Performance ◽  
Wafer Level ◽  
Unit Process ◽  
Integration Schemes ◽  
Process Convergence

Continuous demand for more advanced electronic devices with higher functionality and superior performance in smaller packages is driving the semiconductor industry to develop new and more advanced 3D wafer-level interconnect technologies involving TSVs (through-silicon vias). The TSVs are created either on full-thickness wafer from the wafer front-side ¡V as part of wafer-fab processing during Middle-Of-Line (¡§via middle¡¨) or Back-End-Of-Line (¡§via last BEOL¡¨) ¡V or from the wafer backside after wafer thinning (¡§via last backside¡¨). Independent of the specific approach, the main steps include via etching, lining with insulator, copper barrier/seed deposition, via fill, and chemical mechanical planarization (CMP). Over the past year, the industry has been converging toward some primary unit processes and integration schemes for creating the TSVs. A common cost-of-ownership framework has also begun to emerge. Active collaboration underway among equipment suppliers, materials providers and end users is bringing about rapid development and validation of cost-effective TSV technology in end products. This presentation will address unit-process and integration challenges of TSV fabrication in the context of 20x100ƒÝm and 5x50ƒÝm baseline process flows at Applied Materials. Highlights of wafer-backside process integration involving wafers bonded to silicon or glass carriers will also be discussed.

Cost Comparison of Fan-out Wafer Level Packaging and Flip Chip Packaging

2017 ◽  
Vol 2017 (DPC) ◽  
pp. 1-37 ◽  
Author(s):  
Amy Lujan
Keyword(s):  
Flip Chip ◽  
Cost Effective ◽  
Cost Comparison ◽  
Cost Modeling ◽  
Wafer Level ◽  
Design Features ◽  
Wafer Level Packaging ◽  
Flip Chip Packaging ◽  
The Right ◽  
The Cost

In recent years, there has been increased focus on fan-out wafer level packaging with the growing inclusion of a variety of fan-out wafer level packages in mobile products. While fan-out wafer level packaging may be the right solution for many designs, it is not always the lowest cost solution. The right packaging choice is the packaging technology that meets design requirements at the lowest cost. Flip chip packaging, a more mature technology, continues to be an alternative to fan-out wafer level packaging. It is important for many in the electronic packaging industry to be able to determine whether flip chip or fan-out wafer level packaging is the most cost-effective option. This paper will compare the cost of flip chip and fan-out wafer level packaging across a variety of designs. Additionally, the process flows for each technology will be introduced and the cost drivers highlighted. A variety of package sizes, die sizes, and design features will be covered by the cost comparison. Yield is a key component of cost and will also be considered in the analysis. Activity based cost modeling will be used for this analysis. With this type of cost modeling, a process flow is divided into a series of activities, and the total cost of each activity is accumulated. The cost of each activity is determined by analyzing the following attributes: time required, labor required, material required (consumable and permanent), capital required, and yield loss. The goal of this cost comparison is to determine which design features drive a design to be packaged more cost-effectively as a flip chip package, and which design features result in a lower cost fan-out wafer level package.

Cost Effective and High Performance 28nm FPGA with New Disruptive Silicon-Less Interconnect Technology (SLIT)

2014 ◽  
Vol 2014 (1) ◽  
pp. 000599-000605 ◽  
Author(s):  
Woon-Seong Kwon ◽  
Suresh Ramalingam ◽  
Xin Wu ◽  
Liam Madden ◽  
C. Y. Huang ◽  
...  
Keyword(s):  
High Performance ◽  
Process Integration ◽  
Cost Effective ◽  
Disruptive Innovation ◽  
Design Rule ◽  
Wind Condition ◽  
Silicon Etching ◽  
Wafer Level ◽  
Effective Manner ◽  
Interconnect Technology

This paper introduces the first comprehensive demonstration of new disruptive innovation technology comprising multiple Xilinx patent-pending innovations for highly cost effective and high performance Xilinx FPGA, which is so called stack silicon-less interconnect technology (SLIT) that provides the equivalent high-bandwidth connectivity and routing design-rule as stack silicon interconnect (SSI) technology at a cost-effective manner. We have successfully demonstrated the overall process integration and functions of our new SLIT-employed package using Virtex® -7 2000T FPGA product. Chip-to-Wafer stacking, wafer level flux cleaning, micro-bump underfilling, mold encapsulation are newly developed. Of all technology elements, both full silicon etching with high etch selectivity to dielectric/fast etch rate and wafer warpage management after full silicon etching are most crucial elements to realize the SLIT technology. In order to manage the wafer warpage after full Si removal, a couple of knobs are identified and employed such as top reinforcement layer, micro-bump underfill properties tuning, die thickness/die-to-die space/total thickness adjustments. It's also discussed in the paper how the wafer warpage behaves and how the wafer warpge is managed. New SLIT module shows excellent warpage characteristics of only −30 μm ~ −40 μm at room temperature for 25 mm × 31 mm in size and +20 μm ~ +25 μm at reflow temperature. Thermal simulation results shows that thermal resistance of new SLIT package is almost comparable to that of standard 2000T FCBGA package using TSV interposer with standard heat sink configuration and air wind condition. The reliability assessment is now under the study.

New Stacked Die Interconnect Technology for High-Performance and Low-Cost FPGA

2015 ◽  
Vol 12 (3) ◽  
pp. 111-117
Author(s):  
Woon-Seong Kwon ◽  
Suresh Ramalingam ◽  
Xin Wu ◽  
Liam Madden ◽  
C. Y. Huang ◽  
...  
Keyword(s):  
High Performance ◽  
Flip Chip ◽  
Process Integration ◽  
Cost Effective ◽  
Design Rule ◽  
Innovative Technology ◽  
Wind Condition ◽  
Wafer Level ◽  
Effective Manner ◽  
Interconnect Technology

This article introduces the first comprehensive demonstration of new innovative technology comprising multiple key technologies for highly cost-effective and high-performance Xilinx field programmable gate array (FPGA), which is so-called stack silicon-less interconnect technology (SLIT) that provides the equivalent high-bandwidth connectivity and routing design-rule as stack silicon interconnect (SSI) technology at a cost-effective manner. We have successfully demonstrated the overall process integration and functions of our new SLIT-employed package using Virtex®-7 2000T FPGA product with chip-to-wafer stacking, wafer-level flux cleaning, microbump underfilling, mold encapsulation, and backside silicon removal. Of all technology elements, both full silicon removal process with faster etching and no dielectric layer damage and wafer warpage management after full silicon etching are most crucial elements to realize the SLIT technology. To manage the wafer warpage after full Si removal, a couple of knobs are identified and used such as top reinforcement layer, microbump underfill properties tuning, die thickness, die-to-die space, and total thickness adjustments. It is also discussed in the article how the wafer warpage behaves and how the wafer warpage is managed. New SLIT module shows excellent warpage characteristics of only −30 μm ∼ −40 μm at room temperature (25°C) for 25 mm × 31 mm in size and +20 μm ∼ +25 μm at reflow temperature (250°C). Thermal simulation results shows that thermal resistance of new SLIT package is almost comparable to that of standard 2000T flip-chip ball grid array (FC-BGA) package using through silicon via interposer with standard heat sink configuration and air wind condition. The reliability assessment is now under the study.

Fan-Out Wafer-Level Packaging (FOWLP) of Large Chip with Multiple Redistribution Layers (RDLs)

2017 ◽  
Vol 14 (4) ◽  
pp. 123-131 ◽  
Author(s):  
John Lau ◽  
Ming Li ◽  
Nelson Fan ◽  
Eric Kuah ◽  
Zhang Li ◽  
...  
Keyword(s):  
Thin Layer ◽  
Glass Wafer ◽  
Front Side ◽  
Wafer Level ◽  
Molding Compound ◽  
The Third ◽  
Wafer Level Packaging ◽  
Die Attach ◽  
Solder Balls ◽  
Test Package

This study is for fan-out wafer-level packaging with chip-first (die face-up) formation. Chips with Cu contact-pads on the front side and a die attach film on the backside are picked and placed face-up on a temporary-glass-wafer carrier with a thin layer of light-to-heat conversion material. It is followed by compression molding with an epoxy molding compound (EMC) and a post-mold cure on the reconstituted wafer carrier and then backgrinding the molded EMC to expose the Cu contact-pads of the chips. The next step is to build up the redistribution layers (RDLs) from the Cu contact-pads and then mount the solder balls. This is followed by the debonding of the carrier with a laser and then the dicing of the whole reconstituted wafer into individual packages. A 300-mm reconstituted wafer with a package/die ratio = 1.8 and a die-top EMC cap = 100 μm has also been fabricated (a total of 325 test packages on the reconstituted wafer). This test package has three RDLs; the line width/spacing of the first RDL is 5 μm/5 μm, of the second RDL is 10 μm/10 μm, and of the third RDL is 15 μm/15 μm. The dielectric layer of the RDLs is fabricated with a photosensitive polyimide and the conductor layer of the RDLs is fabricated by electrochemical Cu deposition (ECD).

Damascene-Patterned Metal-Adhesive (Cu-BCB) Redistribution Layers

2006 ◽  
Vol 970 ◽  
Author(s):  
Ronald J. Gutmann ◽  
J. Jay McMahon ◽  
Jian-Qiang Lu
Keyword(s):  
Bonding Strength ◽  
Adhesive Bonding ◽  
Process Integration ◽  
Three Dimensional ◽  
Adhesive Layer ◽  
Wafer Level ◽  
Technology Platform ◽  
Metal Bonding ◽  
Wafer Level Packaging ◽  
Metal Metal

ABSTRACTA monolithic, wafer-level three-dimensional (3D) technology platform is described that is compatible with next-generation wafer level packaging (WLP) processes. The platform combines the advantages of both (1) high bonding strength and adaptability to IC wafer topography variations with spin-on dielectric adhesive bonding and (2) process integration and via-area advantages of metal-metal bonding. A copper-benzocyclobutene (Cu-BCB) process is described that incorporates single-level damascene-patterned Cu vias with partially-cured BCB as the bonding adhesive layer. A demonstration vehicle consisting of a two-wafer stack of 2-4 μm diameter vias has shown the bondability of both Cu-to-Cu and BCB-to-BCB. Planarization conditions to achieve BCB-BCB bonding with low-resistance Cu-Cu contacts have been examined, with wafer-scale planarization requirements compared to other 3D platforms. Concerns about stress induced at the tantalum (Ta) liner-to-BCB interface resulting in partial delamination are discussed. While across-wafer uniformity has not been demonstrated, the viability of this WLP-compatible 3D platform has been shown.

Warpage Characterization of Molded Wafer for Fan-Out Wafer-Level Packaging

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Hsien-Chie Cheng ◽  
Yan-Cheng Liu
Keyword(s):  
Measurement Data ◽  
Mechanical Analysis ◽  
Volumetric Shrinkage ◽  
Heat Of Reaction ◽  
Wafer Level ◽  
Molding Process ◽  
Scanning Calorimetry ◽  
Molding Compound ◽  
Wafer Level Packaging

Abstract This study presents a comprehensive assessment of the process-induced warpage of molded wafer for chip-first, face-down fan-out wafer-level packaging (FOWLP) during the fan-out fabrication process. A process-dependent simulation methodology is introduced, which integrates nonlinear finite element (FE) analysis and element death-birth technique. The effects of the cure-dependent volumetric shrinkage, geometric nonlinearity, and gravity loading on the process-induced warpage are examined. The study starts from experimental characterization of the temperature-dependent material properties of the applied liquid type epoxy molding compound (EMC) system through dynamic mechanical analysis (DMA) and thermal mechanical analysis. Furthermore, its cure state (heat of reaction and degree of cure (DOC)) during the compression molding process (CMP) is measured by differential scanning calorimetry (DSC) tests. Besides, the cure dependent-volumetric (chemical) shrinkages of the EMC system after the in-mold cure (IMC) and postmold cure (PMC) are experimentally determined by which the volumetric shrinkage at the gelation point is predicted through a linear extrapolation approach. To demonstrate the effectiveness of the proposed theoretical model, the prediction results are compared against the inline warpage measurement data. One possible cause of the asymmetric/nonaxisymmetric warpage is also addressed. Finally, the influences of some geometric dimensions on the warpage of the molded wafer are identified through parametric analysis.

SiP(System in Package) Solutions with Wafer Level Packaging Technology

2011 ◽  
Vol 2011 (DPC) ◽  
pp. 002226-002253 ◽  
Author(s):  
In Soo Kang ◽  
Jong Heon (Jay) Kim
Keyword(s):  
Embedded System ◽  
High Performance ◽  
Low Cost ◽  
Wafer Level ◽  
Molding Compound ◽  
Wafer Level Packaging ◽  
Ic Packaging ◽  
Chip Size ◽  
Bonding Technology ◽  
Small Form Factor

In mobile application, the WLP technology has been developing to make whole package size almost same as chip size. However, the I/O per chip unit area has increased so that it gets difficult to realize ideal pad pitch for better reliability. Recently, to achieve the thin and small size, high performance and low cost semiconductor package, Embedding Die and Fanout Technologies have been suggested and developed based on wafer level processing. In this work, as a solution of system in package, wafer level embedded package and fanout technology will be reviewed. Firstly, Wafer level embedded System in Package (WL-eSiP) which has daughter chip (small chip) embedded inside mother chip (bigger chip) without any special substrate has been suggested and developed. To realize wafer level embedded system in package (WL-eSiP), wafer level based new processes like wafer level molding for underfilling and encapsulation by molding compound without any special substrate have been applied and developed, including high aspect ratio Cu bumping, mold thinning and chip-to-wafer flipchip bonding. Secondly, Fan-out Package is considered as alternative package structure which means merged package structure of WLCSP (wafer level chip size package) and PCB process. We can make IC packaging widen area for SIP(System in Package) or 3D package. In addition, TSV and IPD are key enabling technology to meet market demands because TSV interconnection can provide wider bandwidth and high transmission speed due to vertical one compared to wire bonding technology and IPD can provide higher performance, more area saving to be assembled and small form factor compared to discrete passive components.

Sign in / Sign up

Export Citation Format

Share Document