The effect of cultivar and applied nitrogen on the performance of Camelina sativa L. in the Maritime Provinces of Canada

2008 ◽  
Vol 88 (1) ◽  
pp. 111-119 ◽  
Author(s):  
S. D. Urbaniak ◽  
C. D. Caldwell ◽  
V. D. Zheljazkov ◽  
R. Lada ◽  
L. Luan
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Oil Content ◽  
Seed Protein ◽  
Seed Quality ◽  
Camelina Sativa ◽  
Oilseed Crop ◽  
Maritime Provinces ◽  
N Application ◽  
Total N

Worldwide, oilseed demand is steadily expanding. This study assessed the novel oilseed crop Camelina sativa L. in the Maritime Provinces of Canada. Evaluations of cultivar and applied N were performed at Truro, NS, Harrington, PEI, and Hartland, NB, in 2005 and 2006. The results show that the selection of cultivar is an important determinant for the potential success or failure of C. sativa production. Differences in plant stand, plant height, seed yield, oil content and fatty acid profile were found among the cultivars. The cultivar Calena provided the most consistent performance in terms of plant establishment, yield and oil content across all year-sites. Plant height, seed yield, oil content, total plant N and seed protein all responded to applied N rate. Applied N increased the seed yield of C. sativa, but the increase was not significant when the application rates were over 60 kg N ha-1 in NS or 80 kg N ha-1 in PEI. Plant height, total N content in plant tissue and seed protein content increased with increased N application, while oil content decreased. With the exception of erucic acid, all the main fatty acids in C. sativa oil responded to applied N levels or the interaction of N levels and year. Regression analysis showed that the contents of oleic acid and eicosenoic acid decreased with increased N application. The response of linolenic acid to N application was not consistent at each year-site. Results of this study provide convincing evidence of the agronomic suitability of C. sativa to the Maritime Provinces of Canada. Key words: Camelina sativa, cultivar, nitrogen, yield, seed quality

The effect of N and P fertilization on growth, seed yield and quality of industrial hemp in the Parkland region of Saskatchewan

2004 ◽  
Vol 84 (4) ◽  
pp. 939-947 ◽  
Author(s):  
C. L. Vera ◽  
S. S. Malhi ◽  
J. P. Raney ◽  
Z. H. Wang
Keyword(s):  
Protein Content ◽  
Plant Height ◽  
Seed Yield ◽  
Field Experiments ◽  
Seed Protein ◽  
Seed Quality ◽  
Cannabis Sativa ◽  
Seed Protein Content ◽  
Nitrate N ◽  
Industrial Hemp

Industrial hemp (Cannabis sativa L.) has sparked renewed interest in western Canada in recent years, and there is very little research information available on its fertilizer requirements. The objective of this study was to determine the effect of surface-broadcast ammonium nitrate and seedrow placed monoammonium phosphate fertilizers on the production and seed quality attributes of industrial hemp (cv. Fasamo and Finola). Field experiments were conducted on a Black Chernozem silty loam soil at Melfort, Saskatchewan, Canada, in 2000, 2001 and 2002. Increasing N rates significantly increased plant height, biomass, seed yield and seed protein content of hemp in all years. Seed-applied P fertilizer increased plant height in all years, and biomass in 2000, but reduced plant density, biomass and seed yield in 2001 and 2002. Finola consistently had lower plant height, earlier maturity, heavier seeds, and higher seed yield, seed protein content and seed oil content than Fasamo. The average amount of nitrate-N in the 0–60 cm soil was 40 kg N ha-1. Seed yield kg-1 of N was 9.4, 5.9, 4.5 and 3.7 kg ha-1 for Fasamo, and 10.6, 7.7, 6.0 and 4.5 kg ha-1 for Finola, respectively, at 40, 80, 120 and 160 kg ha-1 of soil plus fertilizer N. Key words: Fertilizer, hemp, nitrogen, phosphorus, rainfall, soil extractable P, soil nitrate-N, cultivars

scholarly journals Influence of cut-off irrigation on seed quality and physiological indices of various safflower (Carthamus tinctorius L.) genotypes

2019 ◽  
Vol 72 (4) ◽  
Author(s):  
Sayed Mohammad Taghi Tabib Loghmani ◽  
Forood Bazrafshan ◽  
Omid Alizadeh ◽  
Bahram Amiri ◽  
Abdollah Bahrani
Keyword(s):  
Plant Height ◽  
Water Deficit ◽  
Seed Yield ◽  
Harvest Index ◽  
Oil Content ◽  
Carthamus Tinctorius ◽  
Oil Yield ◽  
Water Deficit Stress ◽  
Oilseed Crop ◽  
Fars Province

Safflower (<em>Carthamus tinctorius</em> L.) is an oilseed crop adapted to arid and semiarid regions. In this study, an experiment was performed to evaluate the effects of water deficiency on plant height, 1,000-grain weight, seed yield, harvest index, relative water content (RWC), oil yield, and oil content in 15 safflower genotypes. A split-plot randomized complete blocks design was arranged with three replications. Safflower plants were grown under normal irrigation and water deficit conditions in Sarvestan, Fars Province, Iran during 2016 and 2017 growing seasons. Combined analysis results indicated that water deficit stress had negative effects on all measured indices. Average seed yield declined by 65.91% (2,337.91 to 796.79 kg ha<sup>−1</sup>) due to water deficit stress. Genotype also had a significant effect on evaluated indices, and the interaction between genotype and irrigation significantly influenced all indices except plant height. Under both conditions, highest RWC, seed yield, and oil yield were observed in Dincer and PI-537598 genotypes. Maximum plant height and 1,000-seed weight in both irrigation conditions were observed in the Dincer genotype. In the normal irrigation condition, maximum harvest index and oil content were observed in the CW-74 genotype. Thus, Dincer and PI-537598 were classified as the best genotypes (based on seed yield, RWC, and oil yield) under both normal irrigation and water deficit stress conditions.

scholarly journals Five-Year Field Trial of Eight Camelina sativa Cultivars for Biomass to be Used in Biofuel under Irrigated Conditions in a Semi-Arid Climate

Agronomy ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 562 ◽  
Author(s):  
Richard H. Lohaus ◽  
Dhurba Neupane ◽  
Mitiku A. Mengistu ◽  
Juan K.Q. Solomon ◽  
John C. Cushman
Keyword(s):  
Seed Yield ◽  
Field Trial ◽  
Arid Regions ◽  
Oil Content ◽  
Camelina Sativa ◽  
Biodiesel Production ◽  
Oilseed Crop ◽  
Northern Nevada ◽  
Production Values ◽  
Semi Arid

Camelina sativa is a promising oilseed crop used for dietary oil and as a biofuel feedstock. C. sativa is a highly adaptable, cool season crop that can be grown on marginal lands with minimal inputs, making it potentially suitable for growth in Northern Nevada and other cooler and drier semi-arid regions of North America. A five-year (2011 to 2015) field trial was conducted to evaluate the seed yield, oil content, and oil and biodiesel production potential of eight C. sativa cultivars in semi-arid regions of Northern Nevada. Columbia, Cheyenne, Calena, and Blaine Creek were ranked as the top four varieties based on the five-year study of mean seed yield, oil content, and estimated oil and biodiesel production values, although none of the cultivars were significant (p > 0.05). Overall, Columbia displayed the highest seed yield, harvest index, oil yield and potential biodiesel production of 910 kg ha−1, 0.147, 273.4 kg ha−1, and 86.4 L ha−1, respectively, across five growing seasons. For each individual year across the eight cultivars, seed yield, oil content, oil and potential biodiesel production was highest in 2015, and lowest in 2012 and 2013 (the drier years). The seed yields of this study fall within the ranges of yields reported in both the irrigated and rainfed locations of the Western United States. Based on the seed yield, oil, and the estimated oil and biodiesel productivity reported in this study, C. sativa can be grown successfully with supplemental irrigation in semi-arid environments like Nevada.

scholarly journals Effect of sulphur on the seed yield and oil content of sesame (Sesamum indicum L.)

2019 ◽  
Vol 17 (1) ◽  
pp. 33-38
Author(s):  
Swapan Kumar Paul ◽  
Mosa Morsheda Khatun ◽  
Md Abdur Rahman Sarkar
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Oil Content ◽  
Dry Matter Production ◽  
Production Plant ◽  
Matter Production ◽  
Stover Yield ◽  
Number Of Seeds ◽  
Number Of Branches

Sulphur is a component of plant amino acids, proteins, vitamins, and enzyme structures which influence the productivity of oil seed and total oil content. The experiment was conducted to find out the effect of sulphur on the seed yield and oil content of sesame in Bangladesh. The experiment comprised three varieties of sesame viz. Binatil-2, Binatil-3 and BARI Til-4 and six levels of sulphur (S) viz. 0, 10, 20, 30, 40 and 50 kg S ha–1. The experiment was laid out in a randomized complete block design with three replications. Dry matter production, crop characters, yield components, seed yield and oil content were significantly influenced by variety, level of sulphur and their interaction. The highest dry matter production plant–1 at 50 DAS (17.56 g), plant height (101.3 cm), number of branches plant–1 (3.66),  number of pods plant-1 (41.56), number of seeds pod-1 (58.83),  seed yield    (747.2 kg ha-1), stover yield (2243.0 kg ha–1) and oil content (40.03%) were obtained in BARI Til-4 while the corresponding lowest values of all parameters were recorded in Binatil-2. In case of sulphur application, the highest dry matter production plant–1 at 50 DAS (20.81 g), plant height (109.7 cm), number of branches plant–1 (3.87),  number of pods plant–1 (46.13),  number of seeds pod-1 (56.67),  seed yield (800.0 kg ha–1), stover yield (2787 kg ha–1 ) and oil content (43.97%) were obtained when crop was fertilized with 30 kg S ha–1 while the lowest seed yield (502.2 kg ha–1), stover yield (1550.0 kg ha–1) and oil content (32.80%) were obtained in control (0 kg S ha–1). BARI Til-4 fertilized with 30 kg S ha–1 produced the highest dry matter plant–1 at 50 DAS (24.80 g), number of pods plant–1 (51.13), seeds pod–1 (62.0) and seed yield (1011.0 kg ha–1). The highest oil content (43.97%) was also recorded in BARI Til-4 fertilized with 30 kg S ha–1, which was as good as that of BARI Til-4 fertilized with 40 kg S ha–1. Therefore, BARI Til-4 fertilized with 30 kg S ha–1 can be considered as a promising practice in respect of seed yield and oil content of sesame in Bangladesh. J. Bangladesh Agril. Univ. 17(1): 33–38, March 2019

Effect of varying seeding rates on hybrid and conventional summer rape performance in Manitoba

1992 ◽  
Vol 72 (3) ◽  
pp. 635-641 ◽  
Author(s):  
A. E. Van Deynze ◽  
P. B. E. McVetty ◽  
R. Scarth ◽  
S. R. Rimmer
Keyword(s):  
Protein Content ◽  
Chlorophyll Content ◽  
Seed Yield ◽  
Harvest Index ◽  
Dry Matter ◽  
Oil Content ◽  
Seed Quality ◽  
Seeding Rate ◽  
Seed Formation ◽  
Matter Production

To compare the effects of varying seeding rate on the agronomic performance, phenology and seed quality of hybrid and conventional summer rape cultivars, four hybrid and two conventional summer rape cultivars were seeded at 1.5, 3.0, 4.5, 6.0 and 9.0 kg ha−1 at two locations for 3 yr. The hybrid cultivars were, very importantly, 24% higher yielding and produced 50% more total dry matter than the conventional cultivars. The hybrid cultivars were, on average, 1.3% lower in seed oil content, 1.0% higher in seed protein content and equal in sum of oil and protein in the seed compared with the conventional cultivars. The hybrid cultivars were on average, 1.3 d later to 50% flowering and 1.1 d later to maturity than the average for the conventional cultivars, (i.e., equal or earlier to flowering and maturity than Regent). The hybrid cultivars were also 3.9% lower in harvest index and 1.3 ppm lower in chlorophyll content than the conventional cultivars. In spite of these differences, there were no significant cultivar-by-seeding-rate interactions, indicating that the hybrid and conventional cultivars responded similarly to varying seeding rate. Lodging, days to 50% flowering, days to maturity, harvest index, survival, oil content and protein content displayed significant linear responses to varying seeding rate. Stand at maturity, seed yield and total dry matter production displayed significant linear and quadratic responses to varying seeding rate. Varying seeding rate had no effect on seed formation period, the sum of oil and protein content, or chlorophyll content. A seeding rate of 6 kg ha−1 maximized seed yield for both hybrid and conventional summer rape cultivars.Key words: Brassica napus, canola, seed quality, agronomy, phenology

scholarly journals Effects of sulphur on the yield, yield component characters and oil content of oilseed rape

2021 ◽  
Vol 66 (1) ◽  
pp. 17-25
Author(s):  
Valiollah Rameeh ◽  
Maryam Niakan ◽  
Mohammad Mohammadi
Keyword(s):  
Brassica Napus ◽  
Plant Height ◽  
Oilseed Rape ◽  
Seed Yield ◽  
Oil Content ◽  
Statistical Difference ◽  
Mean Value ◽  
Yield Component ◽  
Brassica Napus L ◽  
Significant Statistical Difference

The effects of four sulphur levels: S0, S1, S2 and S3, including 0, 12, 24 and 36 kg S ha-1, respectively, along with 115 kg N ha-1 were studied on yield-related traits of oilseed rape (Brassica napus L.). The significant variance of treatments was determined for plant height, yield component characters, seed yield and oil content. The sulphur application significantly increased most of the traits compared to the S0 level. The S3 (36 kg S ha-1) treatment led to the highest mean value of plant height (132 cm) which was classified with S2 (24 kg S ha-1) in the same statistical group. Sulphur had an increasing effect on pods per plant, and it ranged from 92 to 196 for S0 and S3 applications, respectively. S0 and S1 with 92 and 121 pods per plant were grouped in the same statistical group. In addition, S2, and S3 with 165 and 196 pods per plant showed no significant statistical difference. The sulphur application significantly increased seed yield compared to control (S0 level), and it ranged from 2744 to 3215 kg ha-1 in S0 and S3, respectively. The average oil contents of 45.69, 46.96, 47.46 and 49.53 % were detected for 0, 12, 24 and 36 kg S ha-1, respectively.

scholarly journals Crambe (Crambe abyssinica Hochst): A Non-Food Oilseed Crop with Great Potential: A Review

Agronomy ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1380 ◽  
Author(s):  
Dulan Samarappuli ◽  
Federica Zanetti ◽  
Sara Berzuini ◽  
Marisol T. Berti
Keyword(s):  
Erucic Acid ◽  
Seed Yield ◽  
Oil Content ◽  
Negative Impact ◽  
Crop Improvement ◽  
Crop Rotations ◽  
Low Fertility ◽  
Future Research ◽  
Oilseed Crop ◽  
Crambe Abyssinica

Crambe (Crambe abyssinica Hochst) is an oilseed crop in the Brassicaceae family. Crambe’s ability to survive in diverse environmental conditions, its unique oil composition, the high oil content, suitability for the production of slip agents for plasticizers, the capacity to be easily included in common crop rotations, and its adaptability to equipment used for small grain cultivation has renewed the interest in this emerging crop. Crambe is considered one of the main sources of erucic acid, which can be up to 60% of its seed oil content. Erucic acid (C22:1) is a fatty acid with industrial importance since it is used to produce erucamide, key ingredient in the plastic industry. Inclusion of crambe into crop rotations can be beneficial because of its short life cycle, low fertility requirements, resistance to pest and diseases, and relative drought tolerance. Currently high erucic acid rapeseed (Brassica napus L.) (HEAR) is the principal source for erucic acid. However, the risk of contaminating food quality rapeseed (i.e., canola) by cross-pollination and the negative impact on climate, due to high inputs, are potential limitations to expand HEAR cultivation. Crambe has thus great potential to, at least, partially replace HEAR as a source of erucic acid, if the current knowledge-gap in agronomic management and crop improvement (seed yield and quality) can be addressed. Seed yield needs to be increased to be able to compete with HEAR. In addition, reducing glucosinolates and fiber in crambe meal may increase its inclusion in monogastrics rations. The objective of this review was to compile and summarize new and existing information on agricultural practices in crambe production and management to identify gaps in knowledge and areas for future research to increase the cultivation of crambe.

scholarly journals Effects of Genotype, Direct Sowing and Plant Spacing on Field Performance of Jatropha curcas L.

Agronomy ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 465
Author(s):  
Zafitsara Tantely Andrianirina ◽  
Matthias Martin ◽  
Euloge Dongmeza ◽  
Elisa Senger
Keyword(s):  
Seed Yield ◽  
Jatropha Curcas ◽  
Seed Quality ◽  
Field Performance ◽  
Correct Choice ◽  
Biodiesel Production ◽  
Oilseed Crop ◽  
Jatropha Curcas L ◽  
Seed Yields ◽  
Direct Sowing

The tropical multiuse tree Jatropha curcas L. (jatropha) is highly promoted as oilseed crop for biodiesel production and for climate change mitigation, but cultivation practices require further research. The objectives of this study were to assess the effects of varying plant spacings (2.0 m × 4 m compared to 1.5 m × 4 m), crop establishment methods (raising plantlets in a nursery prior to planting to the field compared to direct sowing) and genotypes on seed yield, seed quality and plant height, recorded at a dry-subhumid location in Madagascar (Ihosy) and at a humid location in Cameroon (Batchenga). Averaged across treatment variants and genotypes, seed yield and seed oil content were higher at the dry-subhumid site and in particular the narrower spacing reached higher seed yields per unit area than the wider spacing. At the humid site, plant growth was characterized by strong accumulation of biomass. The establishment method tested at the dry-subhumid site showed no significant differences in the recorded parameters. Our results encourage to re-think common practices in jatropha cultivation and underpin the importance of the correct choice of location, genotype and agronomic practices considering the interactions between all factors.

Genetic variability in Indian mustard (Brassica juncea L. Czern and Coss)

2016 ◽  
Vol 1 (01) ◽  
pp. 30-34
Author(s):  
R. K. Gupta ◽  
V. K. Dwivedi
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Oil Content ◽  
Indian Mustard ◽  
Mean Value ◽  
Mean Values ◽  
Quantitative Characters ◽  
Biological Yield ◽  
The Mean

The data were recorded on five random selected plants for 12 quantitative characters and statistical analyzed. The analysis of variance for all the twelve characters is showed the mean square due to genotypes was highly significant. The mean values of various characters like days to 50 per cent flowering were recorded maximum for genotype IC560719 and Pusa Karishma (84.00 days)with mean 69.08 days The maximum days to 75% maturity were observed in IC-560700 genotype (142.00 days) with a mean of 135.07 days. The plant height highest recorded in the genotype IC-560696 (217.60 cm) with mean of 188.14 cm. The maximum number of primary branches per plant (16.47) was recorded in the genotype NPJ-113 with mean of 10.13. The genotype NPJ-113 produced maximum number of secondary branches per plant (35.47) with mean of 19.78. The maximum length of siliqua was recorded for Kranti (7.03) with mean of 5.24cm. The maximum number of seeds per siliqua was recorded in Kranti genotype (19.13) with mean value 14.91. The maximum 1000-seed weight recorded 5.57g for Pusa Jai Kisan with mean wt. 3.96 g. Pusa Mustard-21 produced highest biological yield (191.13g) with mean 79.00g. The genotype Pusa Jagannath had maximum harvest index (30.98%) with mean value 23.87%. The oil content in mustard maximum in 42.00 % were recorded in Pusa Agrani with mean oil content was 39.16 percent. The genotype Pusa Mustard-21 showed highest seed yield per plant (47.00g) with a mean seed yield of 18.58. The higher heritability estimates in broad sense for biological yield per plant (99.6%), number of primary branches per plant (91.4%), number of secondary branches per plant (98.4) plant height (99.2%), 1000-seed weight (99.4%) and days to 50 per cent flowering (98.5). Expected genetic advance at 5% selection intensity was recorded higher for biological yield per plant (71.60) and number secondary branches per plant (10.87).

Genetic components analysis in Indian mustard (Brassica juncea L. Czern and Coss) under Saharanpur districts

2019 ◽  
Vol 4 (01) ◽  
pp. 66-70
Author(s):  
Amit Tomar
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Oil Content ◽  
Indian Mustard ◽  
Test Weight ◽  
Plant Oil ◽  
Plant Seed ◽  
Days To Flowering ◽  
Genetic Components ◽  
Days To Maturity

Regression coefficient ‘b1’ deviated from unity for length of main raceme, Number of secondary branches per plant, test weight, oil content, Number of siliquae per plant, seed yield per plant. The estimates of additive components ( Dˆ ), dominance components ( 1 Hˆ and 2Hˆ ) were highly significant for days to flowering, days to maturity, plant height, length of main raceme, number of siliquae per plant, number of secondary branches per plant, oil content, test weight and seed yield per plant .All the estimates of Fˆ (mean of Fr value, where Fr is the proportion of negatives effects of Genes in rth parents) was positive and significant number of siliquae per plant, days to flowering, days to maturity, plant height and except for which is highly significant whereas days to maturity was negative and significant. The estimates of 2 hˆ were positive and highly significant for days to flowering, days to maturity, plant height, length of main raceme, oil content, test weight and seed yield per plant. The estimates of mean degree of dominance ( 1Hˆ / Dˆ ) 0.5 were more than unity for length of main raceme, number of secondary branches per plant, oil content, test weight and seed yield per plant.

Sign in / Sign up

Export Citation Format

Share Document