scholarly journals Farklı Terbiye Sistemlerinin M26 Anacı Üzerine Aşılı Braeburn ve Red Chıef Elma Çeşitlerinde Ağaçların Gelişimi, Verim ve Meyve Kalitesi Üzerine Etkileri

2021 ◽  
Vol 5 (4) ◽  
pp. 1003-1013
Author(s):  
Emine KÜÇÜKER
Keyword(s):  
Vertical Axis ◽  
Slender Spindle

Çalışma 2008-2009 yıllarında, Tokat koşullarında M 26 anacına aşılı Braeburn ve Red Chief elma çeşitlerinde yürütülmüştür. Araştırmada, 2006 yılı Aralık ayında tek sıralı 3,5x1,5 m mesafe ile dikilen fidanlara Slender Spindle, Hytec, Vertical Axis terbiye sistemleri uygulanmıştır. Tel-herek kombinasyonu üzerinde geliştirilen ağaçların; vegetatif gelişimi, verim ve meyve kalite performanslarının incelendiği çalışmada dikimden 2 yıl sonra terbiye sisteminin gövde kesit alanına etkisi görülmemiştir. Aynı dikim yoğunluğu ve aynı anaç üzerinde     en küçük taç hacmi Hytec (1,04 m3) sisteminde belirlenmiştir. Bu sonuçlara göre terbiye sistemlerinin taç hacmi     üzerine etkili olduğu saptanmıştır. Verim etkinliği üzerine terbiye sistemlerinin etkisi görülmezken, dekara verim değerlerinde en yüksek değer M 26/Vertical Axis kombinasyonundan (716,33 kg/da) elde edilmiştir. Meyve kalite kriterleri üzerine terbiye sisteminin etkisi görülmezken, kırmızı rengi temsil eden ‘a’ değeri Red Chief/M 26/Vertical Axis kombinasyonunda (23,68) belirlenmiştir. Elde               edilen sonuçlara göre meyve renk oluşumunda ağaç yüksekliği ile birlikte dikim sıklığının da etkili olduğu tespit edilmiştir.  

scholarly journals EFFECTS OF TREE SUPPORT AND TRAINING SYSTEM ON APPLE TREE GROWTH AND PRODUCTIVITY

HortScience ◽  
1992 ◽  
Vol 27 (6) ◽  
pp. 620a-620
Author(s):  
D.C. Elfying
Keyword(s):  
Fruit Set ◽  
Total Yield ◽  
Dry Weight ◽  
Vertical Axis ◽  
Training System ◽  
Shoot Number ◽  
Slender Spindle ◽  
Total Crop ◽  
Support Cost ◽  
And Training

'Empire' (E) and 'Marshall McIntosh' (MM)/'Mark' trees planted in 1986 were trained to the freestanding central leader (CL), central leader with annual extension-shoot heading (HCL), slender spindle (SS) or vertical axis (VA). Support with a full tree stake (SS & VA) had little effect on shoot growth. HCL increased shoot number and mean length. Fewer pruning cuts were made on supported trees, while more were made on HCL trees. Dry weight of prunings 1989-91 was the same for all MM trees, while in E trees, CL and SS had lower pruning weights than HCL and VA. Bloom density was uninfluenced by support or training. Fruit set was greater in 1990 and 1991 on supported E trees, and in 1990 on supported MM trees. Yield was greater on supported systems in 3 out of 4 production years. Total yield after 6 years of age was 26-38% greater for supported trees of both cultivars. Bienniality was reduced about 15% by support in MM trees but unaffected by support or training in E trees. Net total crop value (estimated annual crop value minus annual harvest cost and support cost, if applicable, annual 10% discount rate) in 1991 was approximately $1600 per ha greater for supported E trees and $270 per ha greater for supported MM trees.

scholarly journals Growth and productivity of a young apple orchard at different spacing

2005 ◽  
Vol 11 (2) ◽  
Author(s):  
K. Csigai ◽  
K. Hrotkó
Keyword(s):  
Vertical Axis ◽  
Apple Orchard ◽  
Planting Density ◽  
Cross Sectional ◽  
Local Climate ◽  
Climate Conditions ◽  
Key Factor ◽  
Slender Spindle ◽  
Apple Cultivars ◽  
Dwarfing Rootstocks

Planting of new high density apple orchards showed an increasing tendency over the last ten years. Growers use in those orchards mainly dwarfing or semi dwarfing rootstocks. The spacing for those orchards is recommended based on Dutch and German experiences; however, the optimization of orchard planting density as a key factor for successful orchard management should consider the local climate conditions. An experimental orchard was planted in 2000 to investigate the effect of spacing on three dwarfing rootstocks with two apple cultivars `Jonica' and 'Gala Must'. We compared 8 planting densities (1270-3704 tree/ha) and two tree shapes (slender spindle and vertical axis). In this paper the data of the first five years' growth and bearing are presented. After 4 years, the decreasing tree densities caused reduced trunk cross sectional area. Tree density had a significant positive effect on cumulative yield per hectare. From the examined rootstocks, M.9 Burgmer 984 gave the smallest canopy for both cultivars. The trees on M.9 T.337 and on Jork 9 rootstocks have stronger growth. The light interception was measured under the canopy by AccuPAR (Decagon Devices Inc.'s).

scholarly journals Light Distribution in Three Apple Training Systems as Affected by Cultivar and Rootstock

HortScience ◽  
1998 ◽  
Vol 33 (4) ◽  
pp. 601a-601
Author(s):  
Ray A. Allen ◽  
Curt R. Rom
Keyword(s):  
Apple Tree ◽  
Vertical Axis ◽  
Threshold Value ◽  
Training System ◽  
High Density ◽  
Light Distribution ◽  
Light Penetration ◽  
Full Bloom ◽  
Training Systems ◽  
Slender Spindle

Light distribution in two cultivars on three dwarfing rootstocks in three high-density apple tree training systems was measured in the sixth leaf beginning at full bloom and continuing through the season. Training system had a significant effect on light penetration into the lowest point of the canopy (measured at 0.5 m), with the slender spindle being significantly darker than either the central leader or the vertical axis, although all three systems were below the threshold value of 30% full sun (FS) needed to maintain productivity for most of the season. Cultivar had no significant effect; however, trees of both `Jonagold' and `Empire' fell below 20% FS early in the season and remained there until late in the season. Rootstock had the greatest effect, with trees on M9 and M26 being significantly darker in the lower canopy than trees on Mark. Trees on M26 and M9 fell below 10% FS early in the season and remained there, while trees on Mark never fell below 20% FS.

scholarly journals  Early performance of cv. Jonagold apple on M.9 in five tree training systems

2012 ◽  
Vol 39 (No. 4) ◽  
pp. 158-163 ◽  
Author(s):  
Y. Ozkan ◽  
K. Yıldız ◽  
E. Küçüker ◽  
Ç. Çekiç ◽  
M. Özgen ◽  
...  
Keyword(s):  
Titratable Acidity ◽  
Vertical Axis ◽  
Cumulative Yield ◽  
Fruit Characteristics ◽  
Cross Sectional ◽  
Yield Efficiency ◽  
Training Systems ◽  
Soluble Solid ◽  
Slender Spindle ◽  
Early Performance

The effects of five training systems on tree growth, fruit yield and some fruit characteristics were assessed in Jonagold apple cv. grafted on M.9 rootstock. The trees were trained in one of five ways: slender spindle (SS; 4,761 trees/ha), vertical axis (VA; 2,857 trees/ha), hytec (HT; 1,904 tree/ha) and two different tree densities of super spindle (L-Super S with 5,000 trees/ha; H-Super S with 10,000 trees/ha). Trunk cross-sectional area (TCA) was higher in HT and VA than SS, L-Super S and H-Super S in the 4<sup>th</sup> year. While HT had the highest cumulative yield/tree, the lowest cumulative yield was observed in H-Super S. Although HT had the highest yield/ tree, it ranked the last in cumulative yield efficiency (CYE) due to high TCA. The highest (CYE) was measured in trees trained as L-Super S. When cumulative yields (CY)/ha were evaluated, the yield advantage of high density planting was clearly evident for the first three cropping years. H-Super S systems (10,000 trees/ha) had the highest CY/ha and achieved a yield of 91.24 t/ha in year 4. HT (1,904 trees/ha) had the lowest CY/ha (33.46 t). Training systems had no consistent effect on average fruit diameter, weight, firmness, soluble solid and titratable acidity. &nbsp;

Spatial Representations as an Emergent Feature of Perceptual Processing

2010 ◽  
Vol 24 (3) ◽  
pp. 161-172 ◽  
Author(s):  
Edmund Wascher ◽  
C. Beste
Keyword(s):  
Common Ground ◽  
Event Related Potentials ◽  
Vertical Axis ◽  
Relevant Information ◽  
Sources Of Information ◽  
Integrated Network ◽  
Perceptual Maps ◽  
Emergent Feature ◽  
Related Potentials ◽  
Selection Of

Spatial selection of relevant information has been proposed to reflect an emergent feature of stimulus processing within an integrated network of perceptual areas. Stimulus-based and intention-based sources of information might converge in a common stage when spatial maps are generated. This approach appears to be inconsistent with the assumption of distinct mechanisms for stimulus-driven and top-down controlled attention. In two experiments, the common ground of stimulus-driven and intention-based attention was tested by means of event-related potentials (ERPs) in the human EEG. In both experiments, the processing of a single transient was compared to the selection of a physically comparable stimulus among distractors. While single transients evoked a spatially sensitive N1, the extraction of relevant information out of a more complex display was reflected in an N2pc. The high similarity of the spatial portion of these two components (Experiment 1), and the replication of this finding for the vertical axis (Experiment 2) indicate that these two ERP components might both reflect the spatial representation of relevant information as derived from the organization of perceptual maps, just at different points in time.

Calculating the aerodynamics of vertical axis wind turbines

2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc
Keyword(s):  
Wind Turbine ◽  
Incidence Angle ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Velocity Triangle ◽  
Relationship Of ◽  
The Relationship

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.

Selection of Airfoils for Vertical Axis Wind Turbines for Low Speed, Low Altitude Regions of Central India

2017 ◽  
Vol 7 (11) ◽  
pp. 113
Author(s):  
Abhineet Singh ◽  
Sonali Mitra ◽  
S.V.H. Nagendra ◽  
Pragyan Jain
Keyword(s):  
Numerical Analysis ◽  
Central India ◽  
Vertical Axis ◽  
College Campus ◽  
Low Speed ◽  
Vertical Axis Wind Turbines ◽  
Low Altitude ◽  
Naca 0015 ◽  
Naca 0012 ◽  
Selection Of

The present paper deals with the selection of airfoil profile for VAWTs which is to be installed in the college campus, located in Central India region. Both experimental and numerical analysis he been carried out for the three selected airfoils, NACA 0012, NACA 0015 & S2027. The results show a good correlation with the existing literature. Airfoil profile S2027 has been chosen which best suits our condition. 

Design and Analysis of Vertical Axis Wind Turbine

2017 ◽  
Author(s):  
Prof. R.K. Bhoyar ◽  
Prof. S.J. Bhadang ◽  
Prof. N.Z. Adakane ◽  
Prof. N.D. Pachkawade
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine
Sign in / Sign up

Export Citation Format

Share Document