scholarly journals Environmental Management: Pragmatic Suitability of Low Cost Activated Carbon in Lead (II)Ion Removal by Continuous Mode of Adsorption

2021 ◽  
Vol 20 (4) ◽  
Author(s):  
R. Sivarethinamohan ◽  
S. Sujatha
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Activated Carbon ◽  
Natural Waters ◽  
Activated Carbons ◽  
Fixed Bed ◽  
Adequate Treatment ◽  
Initial Concentration ◽  
Saturation Time ◽  
Bed Height

Heavy metals such as chromium, lead, and arsenic are usually present in trace amounts in natural waters but many of them are toxic even at very low concentrations. An increasing quantity of heavy metals in our resources is currently an area of greater concern, especially since a large number of industries are discharging their metal containing effluents into freshwater without any adequate treatment. Activated carbons show a significant ability in removing heavy metal ions from an aqueous solution by adsorption, which has been examined by many researchers. Activated carbon derived from Manilkarazapota tree-wood (MZTWAC), which was found to be a suitable adsorbent for the removal of lead ions through continuous adsorption mode, was examined in this paper. A breakthrough curve has been plotted to find the effect of initial concentration and adsorbent bed height in the adsorption of lead (II)ion through MZTWAC. The breakthrough time and the saturation time increased as the initial concentration increased from 40 mg.L-1 to 60 mg.L-1. The saturation time was in the incremental mode when the bed height was increased from 5 cm to 7 cm bed thickness for 40 mg.L-1 concentration. Adams-Bohart’s model perfectly fits with this fixed-bed column in the removal of lead(II) from an aqueous solution using MZTWAC. Activated carbon derived from MZTWAC is better suited for the purpose of detoxifying metal-contaminated wastewater.

scholarly journals Possibility of Removing Phosphates from Activated Charbon Made from Date Kernels

2021 ◽  
Vol 06 (03) ◽  
Author(s):  
Nora Seghairi ◽  
Keyword(s):  
Activated Carbon ◽  
Natural Waters ◽  
Activated Carbons ◽  
Kinetic Studies ◽  
Phosphate Adsorption ◽  
Initial Concentration ◽  
Adsorbent Dosage ◽  
Isotherm Study ◽  
Freundlich Isotherms ◽  
Batch Tests

Phosphates in natural waters and whatever their origin, promote the formation of algae, reduce dissolved oxygen and reduce biodiversity in aquatic ecosystems. At high doses, phosphate salts can cause health problems. The objective of our study was to develop a simple, efficient and environmentally friendly sorption depollution technique on available and inexpensive media. We have studied the adsorption of phosphate on activated carbons prepared from date kernels. Batch tests were carried out in order to study different operating parameters such as the effect of contact time, pH, initial phosphate concentration and adsorbent dosage and adsorption kinetic. The sorption equilibrium was analyzed by Langmuir, Freundlich isotherms model. Results show that the phosphate adsorption was reversible and the quantity adsorbed reached its maximum value (14.49 mg/g) after 40 minutes. It was also found that phosphate uptake was affected by variation of pH, initial concentration of phosphate and activated carbon dosage. The adsorption improved with an acidic pH (pH = 6), initial concentration and adsorbent dosage. The results of kinetic studies revealed that adsorption phosphate on activated carbon based on date kernels (Biocar) and the intra-particle diffusion involved in the adsorption mechanism. Also, isotherm study showed that Langmuir isotherm best fit the data and the adsorption was a physical type.

scholarly journals FIXED-BED ADSORPTION OF AQUEOUS VANILLIN ONTO RESIN H103

2017 ◽  
Vol 18 (2) ◽  
pp. 94-104
Author(s):  
Rozaimi Abu Samah
Keyword(s):  
Aqueous Solution ◽  
Flow Rate ◽  
Adsorption Process ◽  
Fixed Bed ◽  
Maximum Adsorption Capacity ◽  
Feed Flow Rate ◽  
Fixed Bed Column ◽  
Initial Concentration ◽  
Bed Height ◽  
Fixed Bed Adsorption

The main objective of this work was to design and model fixed bed adsorption column for the adsorption of vanillin from aqueous solution. Three parameters were evaluated for identifying the performance of vanillin adsorption in fixed-bed mode, which were bed height, vanillin initial concentration, and feed flow rate. The maximum adsorption capacity was increased more than threefold to 314.96 mg vanillin/g resin when the bed height was increased from 5 cm to 15 cm. Bohart-Adams model and Belter equation were used for designing fixed-bed column and predicting the performance of the adsorption process. A high value of determination coefficient (R2) of 0.9672 was obtained for the modelling of vanillin adsorption onto resin H103.

Artificial neural network (ANN) approach for prediction and modeling of breakthrough curve analysis of fixed-bed adsorption of iron ions from aqueous solution by activated carbon from Limonia acidissima shell

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Shilpi Das ◽  
Susmita Mishra
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Aqueous Solution ◽  
Artificial Neural Network ◽  
Activated Carbon ◽  
Packed Bed ◽  
Initial Concentration ◽  
Bed Height ◽  
Artificial Neural Network Ann ◽  
Limonia Acidissima

Abstract The present research article explored the potential of activated carbon prepared from Limonia acidissima shell to adsorb total Fe ions from aqueous solution in a packed bed up-flow column. The effect of essential factors such as bed height (3–5 cm), initial concentration (30–50 mg/L), and flow rate (3.32–5.4 mL/min) on the performance of the column bed was investigated. The adsorption capacity augmented with an increase in bed height and initial adsorbate concentration but declined with an increase in flow rate. The maximum uptake capacity of 209.6 mg/g was achieved at 5 cm bed height, 3.32 mL/min, and 50 mg/L initial concentration. The bed depth service time (BDST) model was used to analyze the experimental data and determine the characteristic parameters of the packed bed reactor suitable for designing large-scale column studies. The Adams–Bohart, Thomas, and Yoon–Nelson models were applied to the experimental data to predict breakthrough curves using non-linear regression. The artificial neural network (ANN) based model was able to efficaciously predict the column performance using the Levenberg–Marquardt (LM) algorithm. A comparison between the experimental data and model results contributed to a high degree of correlation, specifying that the preliminary information was in good agreement with the ANN predicted data.

scholarly journals Removal of Fe (II) ions from Aqueous solution using Rice-husk Adsorbents in fixed-bed column

2021 ◽  
Vol 16 (2) ◽  
pp. 118-125
Author(s):  
Cut Meurah Rosnelly ◽  
Lia Meiriza - Meiriza ◽  
Husni - Husin ◽  
Muhammad - Zaki ◽  
Muhammad Aqilussalim E ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Rice Husk ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Fixed Bed ◽  
Absorption Bands ◽  
Nitrogen Gas ◽  
Sem Images ◽  
Fixed Bed Column

Rice husk has been converted into activated carbon for the adsorbent to remove the heavy metal from the aqueous solution. This study aimed to convert rice husk to activated carbon (AC) for use in the adsorption of Fe ions in a fixed-bed column. Rice husk was first pyrolyzed in an atmosphere of nitrogen gas at 400 oC, then a chemical activation method using sodium hydroxide. The rice husk activated carbon (RH-AC) was characterized using Fourier transform infrared (FTIR) and Scanning electron microscope (SEM) to identify the functional group and microstructure of carbon. The performance of the carbon was tested on the Fe removal from an aqueous solution in a continuous column. The adsorption process was carried out using Fe solution with an initial concentration of 3 mg/L as an artificial sample. The amount of carbon is 25, and 50 g were filled in an adsorber column with a diameter of 5.4 cm and height of 40 cm. SEM images revealed that the activated carbons shown with well-developed pore sizes and pore structure were produced after the chemical activation.  The FTIR absorption bands observed in the RH-AC sample confirmed the presence of hydroxyl (-OH), carbonyl, and carboxylic (-COOH) groups of RH-AC adsorbent. The highest Fe removal efficiencies were 91.9% on chemically activated carbon and column mass 50 g at 400 minutes. The overall study revealed the potential value of chemically activated RH-AC as a possible commercial adsorbent in a continuous column wastewater treatment strategy.

scholarly journals Removal of Cr (VI) from aqueous solution by activated charcoal derived from Sapindus trifoliate L fruit biomass using continuous fixed bed column studies

2021 ◽  
Author(s):  
Samir Mohanta ◽  
Monaj Kumar Sahu ◽  
Prakash Chandra Mishra ◽  
Anil Kumar Giri
Keyword(s):  
Aqueous Solution ◽  
Hexavalent Chromium ◽  
Activated Charcoal ◽  
Fixed Bed ◽  
Maximum Adsorption Capacity ◽  
Thomas Model ◽  
Column Studies ◽  
Fixed Bed Column ◽  
Initial Concentration ◽  
Bed Height

Abstract In this study, the removal of hexavalent chromium from aqueous solution were examined using activated charcoal derived from Sapindus trifoliate L fruit biomass in continuous fixed-bed column studies. The activated S. trifoliate L fruit charcoal was prepared by treating the fruit powder using concentrated nitric acid solution. Experiments were performed to investigate the effect of bed-height and initial concentration on the breakthrough and saturation times. The breakthrough and saturation time increases with increase in bed-height and initial concentration of chromium solutions. The maximum adsorption capacity of S. trifoliate L charcoal for hexavalent chromium was found to be 1.719 mg/g in the bed height 15 cm and initial concentration 10 mg/L, respectively. Column data required at various conditions were explained using Bohart-Adams and Thomas model. Two models were found to be suitable to describe the definite part of the dynamic behaviour of the column with regard to bed-height and initial concentration of hexavalent chromium. On comparison of Adjusted R2 and estimated standard error, the Thomas model was found to best-fitted model and can be used to predict the adsorption of the hexavalent chromium in fixed-bed column studies. Activated Sapindus trifoliate L fruit charcoal was characterised by SEM – EDX and FTIR analysis.

scholarly journals Removal of Pb2+ Ions by ZSM-5/AC Composite in a Fixed-Bed Bench Scale System

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
R. Lakshmipathy ◽  
G. L. Balaji ◽  
Iván Leandro Rodríguez Rico
Keyword(s):  
Activated Carbon ◽  
Flow Rate ◽  
Fixed Bed ◽  
Carbon Composite ◽  
Breakthrough Curves ◽  
Flow Rates ◽  
Initial Concentration ◽  
Continuous Adsorption ◽  
Bed Height ◽  
Na Ions

This investigation suggests the implementation of ZSM-5 activated carbon composite as a prolific adsorbent for the continuous elimination of Pb2+ ions from water. Continuous adsorption experiments were performed by varying three parameters such as process flow rate (2-6 mL min-1), bed height (2-6 cm), and initial concentration (250–750 mg L-1). The highest loading capacity of the fixed-bed 213.3 mg L-1 was achieved with optimal values of 2 mL min-1 of flow rate, bed height of 6 cm, and initial concentration of 750 mg L-1, respectively. The breakthrough curves and saturation points were found to appear quickly for increasing flow rates and initial concentration and vice versa for bed depth. The lower flow rates with higher bed depths have exhibited optimal performances of the fixed-bed column. The mechanism of adsorption of Pb2+ ions was found to be ion exchange with Na+ ions from ZMS-5 and pore adsorption onto activated carbon. The breakthrough curves were verified with three well-known mathematical models such as the Adams-Bohart, Thomas, and Yoon-Nelson models. The later models showed the best fit to the column data over the Adams-Bohart model that can be utilized to understand the binding of Pb2+ ions onto the composite. Regeneration of ZSM-5/activated carbon was achieved successfully with 0.1 M HCl within 60 min of contact time. The outcomes conclude that ZSM-5 activated carbon composite is a prolific material for the continuous removal of water loaded with Pb2+ ions.

Comparative Bio-sorption of Cadmium and Nickel Ions from Aqueous Solution onto Fibers of Date Palm using Fluidized Bed Column

2019 ◽  
Vol 70 (5) ◽  
pp. 1507-1512
Author(s):  
Baker M. Abod ◽  
Ramy Mohamed Jebir Al-Alawy ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Fluidized Bed ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Date Palm ◽  
Operating Conditions ◽  
Initial Concentration ◽  
Bed Height

The aim of this study is to use the dry fibers of date palm as low-cost biosorbent for the removal of Cd(II), and Ni(II) ions from aqueous solution by fluidized bed column. The effects of many operating conditions such as superficial velocity, static bed height, and initial concentration on the removal efficiency of metal ions were investigated. FTIR analyses clarified that hydroxyl, amine and carboxyl groups could be very effective for bio-sorption of these heavy metal ions. SEM images showed that dry fibers of date palm have a high porosity and that metal ions can be trapped and sorbed into pores. The results show that a bed height of 6 cm, velocity of 1.1Umf and initial concentration for each heavy metal ions of 50 mg/L are most feasible and give high removal efficiency. The fluidized bed reactor was modeled using ideal plug flow and this model was solved numerically by utilizing the MATLAB software for fitting the measured breakthrough results. The breakthrough curves for metal ions gave the order of bio-sorption capacity as follow: Cd(II)]Ni(II).

scholarly journals Investigating the performance of agricultural wastes and their ashes in removing phenol from leachate in a fixed-bed column

2020 ◽  
Vol 81 (10) ◽  
pp. 2109-2126 ◽  
Author(s):  
Seyed Omid Ahmadinejad ◽  
Seyed Taghi Omid Naeeni ◽  
Zahra Akbari ◽  
Sara Nazif
Keyword(s):  
Activated Carbon ◽  
Large Scale ◽  
Fixed Bed ◽  
Walnut Shell ◽  
Continuous Systems ◽  
Phenol Removal ◽  
Adsorption Method ◽  
Fixed Bed Column ◽  
Saturation Time ◽  
Coconut Shell Activated Carbon

Abstract One of the major pollutants in leachate is phenol. Due to safety and environmental problems, removal of phenol from leachate is essential. Most of the adsorption studies have been conducted in batch systems. Practically, large-scale adsorption is carried out in continuous systems. In this research, the adsorption method has been used for phenol removal from leachate by using walnut shell activated carbon (WSA) and coconut shell activated carbon (CSA) as adsorbents in a fixed-bed column. The effect of adsorbent bed depth, influent phenol concentration and type of adsorbent on adsorption was explored. By increasing the depth of the adsorbent bed in the column, phenol removal efficiency and saturation time increase significantly. Also, by increasing the influent concentration, saturation time of the column decreases. To predict the column performance and describe the breakthrough curve, three kinetic models of Yon-Nelson, Adams-Bohart and Thomas were applied. The results of the experiments indicate that there is a good match between the results of the experiment and the predicted results of the models.

scholarly journals Removal of Ni (II) from Aqueous Solution by Adsorption onto Activated Carbon Prepared from Lapsi (Choerospondias axillaris) Seed Stone

2014 ◽  
Vol 9 (1) ◽  
pp. 166-174 ◽  
Author(s):  
Rajeshwar M. Shrestha ◽  
Margit Varga ◽  
Imre Varga ◽  
Amar P. Yadav ◽  
Bhadra P. Pokharel ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Activated Carbons ◽  
Low Cost ◽  
Chemical Characterization ◽  
Maximum Adsorption Capacity ◽  
Adsorption Data ◽  
Optimum Ph ◽  
Nickel Adsorption

Activated carbons were prepared from Lapsi seed stone by the treatment with H2SO4 and HNO3 for the removal of Ni (II) ions from aqueous solution. Two activated carbon have been prepared from Lapsi seed stones by treating with conc.H2SO4 and a mixture of H2SO4 and HNO3 in the ratio of 1:1 by weight for removal of Ni(II) ions. Chemical characterization of the resultant activated carbons was studied by Fourier Transform Infrared Spectroscopy and Boehm titration which revealed the presence of oxygen containing surface functional groups like carboxyl, lactones and phenols in the carbons. The optimum pH for nickel adsorption is found to be 5. The adsorption data were better fitted with the Langmuir equations than Freundlich adsorption equation to describe the equilibrium isotherms. The maximum adsorption capacity of Ni (II) on the resultant activated carbons was 28.25.8 mg g-1 with H2SO4 and 69.49 mg g-1 with a mixture of H2SO4 and HNO3. The waste material used in the preparation of the activated carbons is inexpensive and readily available. Hence the carbons prepared from Lapsi seed stones can act as potential low cost adsorbents for the removal of Ni (II) from water. DOI: http://dx.doi.org/10.3126/jie.v9i1.10680Journal of the Institute of Engineering, Vol. 9, No. 1, pp. 166–174

scholarly journals Process Optimization for Ethyl Ester Production in Fixed Bed Reactor Using Calcium Oxide Impregnated Palm Shell Activated Carbon (CaO/PSAC)

2012 ◽  
Vol 1 (3) ◽  
pp. 81 ◽  
Author(s):  
A Buasri ◽  
B Ksapabutr ◽  
M Panapoy ◽  
N Chaiyut
Keyword(s):  
Activated Carbon ◽  
Ethyl Ester ◽  
Calcium Oxide ◽  
Residence Time ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Molar Ratio ◽  
Optimum Conditions ◽  
Palm Shell ◽  
Bed Height

: The continuous production of ethyl ester was studied by using a steady-state fixed bed reactor (FBR). Transesterification of palm stearin (PS) and waste cooking palm oil (WCPO) with ethanol in the presence of calcium oxide impregnated palm shell activated carbon (CaO/PSAC) solid catalyst was investigated. This work was determined the optimum conditions for the production of ethyl ester from PS and WCPO in order to obtain fatty acid ethyl ester (FAEE) with the highest yield. The effects of reaction variables such as residence time, ethanol/oil molar ratio, reaction temperature, catalyst bed height and reusability of catalyst in a reactor system on the yield of biodiesel were considered. The optimum conditions were the residence time 2-3 h, ethanol/oil molar ratio 16-20, reaction temperature at 800C, and catalyst bed height 300 mm which yielded 89.46% and 83.32% of the PS and WCPO conversion, respectively. CaO/PSAC could be used repeatedly for 4 times without any activation treatment and no obvious activity loss was observed. It has potential for industrial application in the transesterification of triglyceride (TG). The fuel properties of biodiesel were determined. Keywords: biodiesel, calcium oxide, ethyl ester, fixed bed reactor, palm shell activated carbon

Sign in / Sign up

Export Citation Format

Share Document