scholarly journals Characteristics of Carbonate Rocks and Environmental Conditions of Some Caves, Northern Iraq

2021 ◽  
Vol 54 (2E) ◽  
pp. 164-175
Author(s):  
Hiba Alobadi
Keyword(s):  
Environmental Conditions ◽  
Carbonate Rocks ◽  
The Other ◽  
X Ray Diffraction ◽  
Thin Sections ◽  
Northern Iraq ◽  
Geotechnical Characteristics ◽  
North Iraq ◽  
Time Required ◽  
Geological Formations

Six caves were studied in north Iraq, which is the Beeston and Shanidar in Erbil, Garston, Swaratuka, and Ain Ishky in Duhok Governorate, Al-Naqut in Nineveh Governorate. All these caves are located within geological formations of carbonate rocks, limestone, and dolostone. Geotechnical and geometrical measurements were made for these caves, and rocks were sampled from different areas inside and outside the caves. The slake durability of the rocks was measured and thin sections were made, in addition to measuring the percentage of insoluble residues and analyzing the mineral constituents of the collected samples by using X-ray diffraction. By reviewing the geotechnical characteristics and environmental conditions, the Beeston Cave was found to be the oldest of the caves studied because its size is greater than that of the other caves and its rocks have better geotechnical characteristics than the other caves, which means that the time required for it to form is longer. The Al-Naqut Cave was also found to be the newest among these six caves because, in addition to its small size, it has the lowest durability value after the Shanidar Cave and has the lowest value of compressive strength.

scholarly journals Apport De L’étude Géotechnique, Minéralogique Et Géochimique Pour La Valorisation Des Carrières De Sable De La Région De Meknès (Maroc)

2017 ◽  
Vol 13 (24) ◽  
pp. 101
Author(s):  
Hicham Benbaqqal ◽  
Aissa Masrour ◽  
Rachida Mahjoubi ◽  
El Mehdi Benyassine ◽  
Mohamed Erragragui ◽  
...  
Keyword(s):  
Building Materials ◽  
The Other ◽  
Mechanical Parameters ◽  
X Ray Diffraction ◽  
Rational Use ◽  
X Ray ◽  
Geological Diversity ◽  
Materials Used ◽  
Geological Formations

The plateau of Meknes and its borders shows a great geological diversity. The plateau is formed by a cover of marls, fawn sands and lacustrine limestones. The geological formations of the borders are composed of dolomitic limestones and marls of Jurassic age. The quarries of the plateau of Meknes and its borders are of diversified geological nature. In this region, the problem of increased demand for building materials causes excessive overexploitation, without taking account of quality and rational use measures. This problem requires a study of the state of the quality of these materials to guide the entrepreneurs towards the places where the quarries are of quality required by the standards of the field of the BTP, and on the other hand to control over the abuse user of these building materials and its influence on the environment. For these aims, a study of mineralogical and chemical analyzes by X-ray diffraction and by ICP-AES was carried on the samples taken from four quarries of materials used in this region. Thus, the physical and mechanical parameters of the materials are measured according to the most fundamental geotechnical protocols in the construction geomaterials. These analytical results have allowed to class spatially of the mineralogical, geochemical and geotechnical quality of this material in comparison with the standards.

Chemical modification of the bacterial wall to determine sites of metal deposition

1978 ◽  
Vol 36 (2) ◽  
pp. 350-351
Author(s):  
T. J. Beveridge
Keyword(s):  
Electron Scattering ◽  
Metal Salt ◽  
Metal Deposition ◽  
Suitable Model ◽  
X Ray Diffraction ◽  
Subtilis Cell ◽  
Thin Sections ◽  
X Ray ◽  
Section Data ◽  
Metal Impregnation

The Bacillus subtilis cell wall provides a protective sacculus about the vital constituents of the bacterium and consists of a collection of anionic hetero- and homopolymers which are mainly polysaccharidic. We recently demonstrated that unfixed walls were able to trap and retain substantial amounts of metal when suspended in aqueous metal salt solutions. These walls were briefly mixed with low concentration metal solutions (5mM for 10 min at 22°C), were well washed with deionized distilled water, and the quantity of metal uptake (atomic absorption and X-ray fluorescence), the type of staining response (electron scattering profile of thin-sections), and the crystallinity of the deposition product (X-ray diffraction of embedded specimens) determined.Since most biological material possesses little electron scattering ability electron microscopists have been forced to depend on heavy metal impregnation of the specimen before obtaining thin-section data. Our experience with these walls suggested that they may provide a suitable model system with which to study the sites of reaction for this metal deposition.

The Electron Effect of Aromatic Group: Control Conformation of 2-Aromatic Cyclododecanone Derivatives

2020 ◽  
Vol 24 (10) ◽  
pp. 1139-1147
Author(s):  
Yang Mingyan ◽  
Wang Daoquan ◽  
Wang Mingan
Keyword(s):  
1H Nmr ◽  
13C Nmr ◽  
Nmr Spectra ◽  
Coupling Constants ◽  
The Other ◽  
Repulsive Interaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electron Effect ◽  
Group Control

2-Phenylcyclododecanone and 2-cyclohexylcyclododecanone derivatives were synthesized and characterized by 1H NMR, 13C NMR, HR-ESI-MS and X-ray diffraction. Their preferred conformations were analyzed by the coupling constants in the 1H NMR spectra and X-ray diffraction, which showed the skeleton ring of these derivatives containing [3333]-2-one conformation, and the phenyl groups were located at the side-exo position of [3333]-2-one conformation due to the strong π-π repulsive interaction between the π- electron of benzene ring and π-electron of carbonyl group. The cyclohexyl groups were located at the corner-syn or the side-exo position of [3333]-2-one conformation depending on the hindrance of the other substituted groups. The π-π electron effect played a crucial role in efficiently controlling the preferred conformation of 2-aromatic cyclododecanone and the other 2-aromatic macrocyclic derivatives with the similar preferred square and rectangular conformations.

scholarly journals Quartz Crystallite Size and Moganite Content as Indicators of the Mineralogical Maturity of the Carboniferous Chert: The Case of Cherts from Eastern Asturias (Spain)

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Crystallite Size ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared And Raman Spectroscopy ◽  
First Time ◽  
Geological Formations

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.

scholarly journals A Numerical Study of Sub-Millisecond Integrated Mix-and-Inject Microfluidic Devices for Sample Delivery at Synchrotron and XFELs

2021 ◽  
Vol 11 (8) ◽  
pp. 3404
Author(s):  
Majid Hejazian ◽  
Eugeniu Balaur ◽  
Brian Abbey
Keyword(s):  
Molecular Dynamics ◽  
Flow Rate ◽  
Numerical Study ◽  
Three Dimensional ◽  
Microfluidic Devices ◽  
Liquid Jets ◽  
Mixing Efficiency ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
Time Required

Microfluidic devices which integrate both rapid mixing and liquid jetting for sample delivery are an emerging solution for studying molecular dynamics via X-ray diffraction. Here we use finite element modelling to investigate the efficiency and time-resolution achievable using microfluidic mixers within the parameter range required for producing stable liquid jets. Three-dimensional simulations, validated by experimental data, are used to determine the velocity and concentration distribution within these devices. The results show that by adopting a serpentine geometry, it is possible to induce chaotic mixing, which effectively reduces the time required to achieve a homogeneous mixture for sample delivery. Further, we investigate the effect of flow rate and the mixer microchannel size on the mixing efficiency and minimum time required for complete mixing of the two solutions whilst maintaining a stable jet. In general, we find that the smaller the cross-sectional area of the mixer microchannel, the shorter the time needed to achieve homogeneous mixing for a given flow rate. The results of these simulations will form the basis for optimised designs enabling the study of molecular dynamics occurring on millisecond timescales using integrated mix-and-inject microfluidic devices.

Immunochemical Studies on Antithrombin III

1979 ◽  
Author(s):  
E.J. McKay
Keyword(s):  
Antithrombin Iii ◽  
The Other ◽  
Antigenic Determinants ◽  
Immunochemical Analysis ◽  
Paradoxical Effect ◽  
Test Protocol ◽  
Agar Gel ◽  
High Affinity ◽  
Time Required ◽  
Antigen Antibody

Depressed Antithrombin III (AT) levels Increase thrombic tendency in man, therefore value in assaying this protein has been established. Immunochemical analysis of AT in clinical disease has however proved controversial, consequently systematic studies were undertaken to rationalize the requirements necessary to optimise these methods in particular electro-Immunoassay. The known binding affinity of AT for heparin has been exploited to differentiate high affinity AT from its inhibitor - protease complexes and has resulted in reports stating that heparin added to the agar gel prior to electrophoresis significantly reduces the time required for completion of antigen/antibody complexes. Our studies however have demonstrated that the antibody required for quantitative analysis must be capable of not only reacting with “native” antigenic determinants of AT but also with “neo” antigens that are exposed when inhibitor-protease complexes are formed. Heparin should not be used in the test protocol, for it has a paradoxical effect on Immunopreclpltation in gels, masking some antigenic determinants of unbound - high affinity AT on one hand, and appear to disrupt the Immunoprecipitin “rocket” formed with the inhibitor-protease complexes during electrophoresis on the other.

III.—On the Reduction of Ferric Iron (1) by Sulphurous Acid and (2) by Zinc Dust

1913 ◽  
Vol 32 ◽  
pp. 12-16
Author(s):  
Alexander Charles Cumming ◽  
E. W. Hamilton Smith
Keyword(s):  
Sulphuric Acid ◽  
Carbonate Rocks ◽  
Ferric Iron ◽  
Zinc Dust ◽  
The Other ◽  
Additional Contribution ◽  
Large Excess ◽  
Other Hand

So many papers have appeared on this subject that some apology seems desirable before making an additional contribution. The amount of published work on reduction with sulphurous acid is in itself an indication that many workers have found difficulties. It has been shown that the reduction does not take place in presence of large excess of hydrochloric or sulphuric acid, but the reduction will still occur while the reaction of the solution is strongly acid. On the other hand, Hillebrand (“Analysis of Silicate and Carbonate Rocks,” U.S. Bulletin, 442, p. 113) states if the solution after addition of sulphite is red in colour, it is too alkaline and acid must be added.

PHASE TRANSITION IN LAYERED PEROVSKITE LIKE MANGANATE Ca3Mn2O7 UNDER HIGH PRESSURE

2001 ◽  
Vol 15 (18) ◽  
pp. 2491-2497 ◽  
Author(s):  
J. L. ZHU ◽  
L. C. CHEN ◽  
R. C. YU ◽  
F. Y. LI ◽  
J. LIU ◽  
...  
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
Diamond Anvil Cell ◽  
The Other ◽  
Layered Perovskite ◽  
X Ray Diffraction ◽  
Two Phase ◽  
X Ray ◽  
Diamond Anvil

In situ high pressure energy dispersive X-ray diffraction measurements on layered perovskite-like manganate Ca 3 Mn 2 O 7 under pressures up to 35 GPa have been performed by using diamond anvil cell with synchrotron radiation. The results show that the structure of layered perovskite-like manganate Ca 3 Mn 2 O 7 is unstable under pressure due to the easy compression of NaCl-type blocks. The structure of Ca 3 Mn 2 O 7 underwent two phase transitions under pressures in the range of 0~35 GPa. One was at about 1.3 GPa with the crystal structure changing from tetragonal to orthorhombic. The other was at about 9.5 GPa with the crystal structure changing from orthorhombic back to another tetragonal.

scholarly journals Morphological variation in Leptorhynchos squamatus (Gnaphalieae: Asteraceae)

2002 ◽  
Vol 15 (2) ◽  
pp. 205 ◽  
Author(s):  
Christina Flann ◽  
Pauline Y. Ladiges ◽  
Neville G. Walsh
Keyword(s):  
High Altitude ◽  
Morphological Variation ◽  
Environmental Conditions ◽  
Leaf Size ◽  
Alpine Plants ◽  
The Other ◽  
Herbarium Specimens ◽  
South Eastern ◽  
Eastern Australia ◽  
Low Altitude

A study of morphological variation in Leptorhynchos squamatus (Labill.) Less. across its range in south-eastern Australia was undertaken to test the hypothesis that L. squamatus includes two taxa. Phenetic pattern analyses of both field-collected and herbarium specimens on the basis of morphology confirmed two major groups. Bract, cypsela, pappus bristle and leaf characters were particularly important in separating the two groups. The taxa are separated by altitude differences with one being a low-altitude plant found in many habitats and the other being a high-altitude taxon that is a major component of alpine meadows. Lowland plants have dark bract tips, fewer and wider pappus bristles than alpine plants, papillae on the cypselas and more linear leaves. A somewhat intermediate population from the Major Mitchell Plateau in the Grampians shows some alpine and some lowland characters but is included in the lowland taxon. Seeds from five populations (two alpine, two lowland and Major Mitchell) were germinated and plants grown for 18 weeks under four controlled sets of environmental conditions. The experiment showed that leaf size and some other characters are affected by environmental conditions, but that there are underlying genetic differences between the lowland and alpine forms. Leptorhynchos squamatus subsp. alpinus Flann is described here to accommodate the highland taxon.

Studies Directed Towards the Total Synthesis of Anticapsin and Related Compounds. IV. Competitive Reaction of Amino and Carboxy Substituents in the Halohydrination of 2-Aminobicyclo[2.2.2]oct-5-ene-2-carboxylic Acid Derivatives

1994 ◽  
Vol 47 (12) ◽  
pp. 2221 ◽  
Author(s):  
MJ Crossley ◽  
SR Davies ◽  
TW Hambley
Keyword(s):  
Total Synthesis ◽  
The Other ◽  
X Ray Diffraction ◽  
Amino Groups ◽  
Competitive Reaction ◽  
Trimethylsilyl Group ◽  
X Ray ◽  
Tricyclic Compounds ◽  
Tricyclic Compound ◽  
Related Compounds

Bromohydrination of benzyl (1RS,2SR,4SR)-2-benzyloxycarbonylamino-1-trimethylsilyloxy-bicyclo[2.2.2]oct-5-ene-2-carboxylate (6a) and the (1RS,2RS,4SR)- diastereomer (6b) with N- bromoacetamide in aqueous dioxan has been investigated. These reactions are highly regio-and stereo-selective and give the corresponding bromohydrins (9a) and (9b), but in moderate to low yield. These bromohydrins have the necessary stereochemistry for conversion into anticapsin. The other products from the reaction are tricyclic compounds formed by capture of the anti- bromonium cation intermediates or resultant bromohydrins by interaction with the proximal protected carboxy and amino groups within the molecules. Thus the carbolactone (11) is formed from the endo -adduct (6a), and the carbonimidic acid derivative (12) and the cyclic urethane (13) are formed from the exo-adduct (6b). Cleavage of the trimethylsilyl group from the tricyclic compound (12) gives benzyl (1RS,2RS,3RS,7RS,8RS)-5-benzyloxy-2-bromo-8-hydroxy-4-oxa-6-azatricyclo[5.3.1.03,8]undec-5-ene-7-carboxylate(14), the structure of which was determined by X-ray diffraction methods and refined to a residual of 0.035 for 1549 independent observed reflections. The crystals of (14) are monoclinic, P21/c, a 12.954(3), b 6.197(3), c 26.784(7) Ǻ, β 95.33(2)°, Z 4. Reactions attempting to generate iodohydrins from the alkenes (6) were also highly regioselective and gave detrimethylsilylated iodo analogues of (11) and (13).

Sign in / Sign up

Export Citation Format

Share Document