scholarly journals Characteristics and yield of basic seeds of native potato (Solanum goniocalyx) obtained in temporary immersion bioreactor under greenhouse conditions

2021 ◽  
Vol 38 (2) ◽  
pp. 322-341
Author(s):  
Doris Marmolejo Gutarra ◽  
Christopher Corpus Chagua
Keyword(s):  
Plant Height ◽  
Skin Color ◽  
Block Design ◽  
Tuber Size ◽  
Tuber Weight ◽  
Temporary Immersion Bioreactor ◽  
Temporary Immersion ◽  
Tuber Skin ◽  
Randomized Block Design ◽  
Basic Seed

The characteristics and yield of basic seeds of two native Peruvian potato varieties "Peruanita" and "Amarilla Tumbay" (Solanum goniocalyx), obtained in temporary immersion bioreactors under greenhouse conditions, were evaluated in order to obtain quality seeds in a continuous and sustainable way to guarantee farmers' production and to meet national demand. For this purpose, microtubers and cuttings obtained by temporary immersion bioreactors (TIB) were cultivated in an area of 240 m2 at 3.201 masl, a completely randomized block design was applied with a bifactorial arrangement (varieties x propagules) of 4 treatments and 3 repetitions. The variables evaluated were: survival (SP) and plant height (AP) at 30 days, number of tubers per plant (NT), tuber diameter (DT), tuber weight (PT), tuber size (TT), tuber skin color (CP) and yield in kg per 14.05 m2 (R). Tubers produced from the microtubers stood out from the cuttings in yield for basic seed, presenting an R=26.89 ± 0,483 kg.14.05 m-2, PT= 0,12 ±0,0036 kg and a TD= 22.59 ±0,451 mm; being the variety "Peruanita" the most optimal in number and weight of tubers per plant for basic seed. The basic seed coming from microtubers was obtained in 5 months, being an alternative to guarantee a constant production, allowing to take care of the demand of farmers and to lower the costs of production.

scholarly journals Pengaruh Komposisi Media Tanam terhadap Pertumbuhan dan Hasil Bawang Merah

2021 ◽  
Vol 5 (1) ◽  
pp. 38-43
Author(s):  
Sugianto Sugianto ◽  
Kamelia Dwi Jayanti
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Volume Ratio ◽  
Nutrient Content ◽  
Growth And Yield ◽  
Tuber Weight ◽  
Media Composition ◽  
Randomized Block Design ◽  
Number Of Leaves ◽  
Goat Manure

Shallot production in Central Sulawesi recorded a decline from 8.651-8.362 tons, between 2017-2018. However, the use of an accurate composition of the planting medium serves as a possible alternative to boost the yield. Also, the introduction of organic matter tends to increase the nutrient content, influence the aeration, and subsequently leads to drainage. This study is aimed at determining the effect of plant media composition on shallot growth and yield. A randomized block design comprising 4 treatments, termed soil composition, husk charcoal, and goat manure. Each treatment was repeated at 5 times to achieve 20 experimental units. The results showed that the plant media composition indicated a significant effect on the parameters of plant height at age 4 and 6 Weeks After Plantings (WAP), quantities of leaves aged 4 WAP, tillers aged 6 WAP as well as tubers per clump. Similar impacts were also reported on plant height at 2 WAP, the number of leaves aged 2 and 6 WAP, fresh tuber weight, tuber diameter, accumulated weight loss, root length, and available moisture content. Furthermore, the addition of husk charcoal and manure at a volume ratio of soil: husk charcoal: manures = 2:1:1, tends to increase the quantities of leaves, tillers, tubers per clump, as well as plant height, fresh tuber weight, and shallot bulb diameter.

scholarly journals Respon Pertumbuhan Dan Hasil Tanaman Bawang Merah (Allium ascalonicum L.) Varietas Bima Brebes Pada Pemberian Pupuk Organik Konsentrat

2021 ◽  
Vol 9 (2) ◽  
pp. 120
Author(s):  
Debi Hartoni ◽  
Nunung Sondari ◽  
Endeh Masnenah
Keyword(s):  
Sea Level ◽  
Plant Height ◽  
Growth Response ◽  
Block Design ◽  
Organic Fertilizer ◽  
Organic Fertilizers ◽  
Tuber Weight ◽  
Randomized Block Design ◽  
Affected Plant ◽  
Number Of Leaves

This experiment was carried out in Ujungjaya District, Sumedang Regency. At an altitude of 50 meters above sea level, the soil type is Vertisol. The time of this experiment was carried out from June to August 2020. The purpose of this experiment was to study, determine and get the best dose of growth response and yield of shallot (Allium ascalonicum L.) Bima Brebes variety on the application of concentrated organic fertilizer. The design used was a simple randomized block design (RBD) consisting of 4 treatments of concentrated organic fertilizer in 6 replications. Concentrated organic fertilizers used are: A = 0 g/polybag, B = 50 g/polybag, C = 75 g/polybag and D = 100 g/polybag. The results showed that the application of concentrated organic fertilizer significantly affected plant height, number of leaves at age (14 HST) and tuber weight per plot. The application of concentrated organic fertilizer at a dose of 75 g/polybag showed higher yields on plant height, number of leaves, number of tubers per clump, tuber weight per clump and tuber weight per plot.

scholarly journals PENINGKATAN PERTUMBUHAN DAN HASIL BAWANG MERAH (Allium ascalonicum, L) DENGAN APLIKASI PERBEDAAN KONSENTRASI BIO SLURRY DAN PEMOTONGAN UMBI BIBIT

2021 ◽  
Vol 10 (1) ◽  
pp. 40-49
Author(s):  
Pramono Hadi Hadi
Keyword(s):  
Sea Level ◽  
Plant Height ◽  
Seed Tuber ◽  
Block Design ◽  
Growth And Yield ◽  
Tuber Weight ◽  
Plant Weight ◽  
Factorial Method ◽  
Seed Tubers ◽  
Randomized Block Design

ABSTRACT            This study aims to determine the effect of bio slurry and cutting of seed tubers on the growth and yield of shallot plants in the Dukuh Kepoh Food and Horticultural Garden, Tohudan Village, Colomadu District, Karanganyar Regency with a height of ± 105 m above sea level, from April until June 2020.          This study used a factorial method with a complete randomized block design (RAKL), consisting of two treatment factors, while the two treatment factors with 12 treatment combinations, each treatment was repeated (3) times. The first treatment, the concentration of bio slurry (S) which consists of 4 levels, namely (S1: Bio slurry 0 ml / l, S2: Bio slurry 50 ml / l, S3: Bio slurry 100 ml / l, S4: Bio slurry 150 ml / l). The second treatment was cutting the seed tubers (P), which consisted of three levels (P1: Cutting 1/4 part of seed tubers, P2: Cutting 1/3 parts of seed tubers, P3: Cutting 1/2 parts of seed tubers).         The results showed that the treatment with bio slurry (S) had no significant effect on all observed parameters. Treatment by cutting seed tubers (P) had a very significant effect on plant height, weight of fresh tubers per plant, weight of fresh tubers per plot and had a significant effect on the number of fresh tubers per plant, but had no significant effect on the number of tubers per plot and weight of fresh stems. The combination between the treatment of bio slurry and cutting of seed tubers (SxP) did not significantly affect all observed parameters, The highest yield of fresh tubers per plot was obtained in treatment (S2P2) with a yield of 800.00 g, while the lowest tuber weight per plot was obtained in treatment ( S1P3) with a yield of 433.33 g.   Keywords: shallot, bio-slurry, seed tuber cutting    

scholarly journals Pengaruh Olah Tanah Dan Jarak Tanam Terhadap Pertumbuhan Dan Hasil Bawang Tiwai (Eleutherine americana Merr.)

2017 ◽  
Vol 1 (2) ◽  
pp. 43
Author(s):  
Anita Rosita ◽  
Rustam Baraq Noor ◽  
Mahdalena Mahdalena
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Treatment Plant ◽  
Growth And Yield ◽  
Tuber Weight ◽  
Plant Spacing ◽  
Randomized Block Design ◽  
Tuber Production ◽  
Planting Distance ◽  
Eleutherine Americana

Effect of tillage and plant spacing on growth and yield of onion tiwai (Eleutherine americana Merr.). The purpose of this study was to evaluate the response of the growth and yield of onion tiwai to the treatment and processing of soil and plant spacing parameters diperlakukan.Penelitian was conducted for 3 months starting in December 2009 until March 2010, research carried out in Loa Janan Ulu Kutai regency. This research is a randomized block design Plots Divided (RAK split plot) with 2 x 3 factorial design, each treatment was repeated three times, the first factor of tillage (T) is t0: without tillage (control) t1: with processing soil, while the second factor is the spacing of (J) is j1: 20 x 25 cm, j2: 25 x 30 cm and j3: 30 x 35 cm. The results showed that treatment of tillage (T) real berpengauh on plant height parameter ages of 30 and 60 days after planting, the number of chicks aged 60 and 90 days after planting, planting tuber number, tuber weight perpetak and tuber production tons per hectare, on plant height parameter of age 90 days after planting and the parameters of the number of seedlings 30 days after planting showed no significant effect. At the treatment plant spacing (J) on all parameters showed no significant effect, ie plant height ages 30, 60 and 90 days after planting, the number of chicks aged 30, 60 and 90 days after planting, the number of tubers, tuber weight and tuber production tons perpetak per hectare. Interaction between tillage and planting distance (T x J) also showed no significant effect on all parameters: plant height is age 30, 60 and 90 days after planting, the number of chicks aged 30, 60 and 90 days after planting, the number of bulbs, heavy perpetak bulbs and tubers production tons per hectare.

PENGARUH KOMPOS SAMPAH KOTA DAN PUPUK KANDANG SAPI TERHADAP PERTUMBUHAN DAN HASIL TANAMAN PAKCOY (BRASSICA RAPA, L. CHINENSIS) PADA ALUVIAL KABUPATEN INDRAMAYU

2018 ◽  
Vol 9 (2) ◽  
pp. 153-163
Author(s):  
Wiwik Ambarsari ◽  
Henly Yuliana
Keyword(s):  
Plant Height ◽  
Brassica Rapa ◽  
Block Design ◽  
Cattle Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Two Factors ◽  
Number Of Leaves ◽  
Experimental Garden

The study aimed to determine the effect of the combination of city waste compost and cattle manure on the growth and yield of pakcoy plants (Brassica rapa, L. Chinensis) in Aluvial, Indramayu Regency. The study was conducted at the Experimental Garden of the Faculty of Agriculture, Wiralodra University, Indramayu Regency from March to August 2018. This study used Factorial Pattern Randomized Block Design with two factors. The first factor is city waste compost and the second factor is cattle manure with 4 levels: 0%, 3.0%, 6.0%, and 9.0%, repeated twice. The results showed that there was an independent influence between city waste compost and cattle manure on plant height and number of leaves. The best combination to increase the feasibility weight of pakcoy consumption is by giving city waste compost 9.0% (S4) and cattle manure 6.0% (K3).

scholarly journals Influence of vernalization and bulb size on the production of lily cut flowers and lily bulbs

2017 ◽  
Vol 38 (4Supl1) ◽  
pp. 2399 ◽  
Author(s):  
Diogo Brito de Almeida ◽  
José Geraldo Barbosa ◽  
José Antônio Saraiva Grossi ◽  
Fernando Luiz Finger ◽  
Joice Crescencio Heidemann
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Cut Flowers ◽  
Floral Buds ◽  
Randomized Block Design ◽  
Commercial Harvest ◽  
Physiological Phenomenon ◽  
Cold Chamber ◽  
The Impact

Exposure of bulbs to cold, a physiological phenomenon called vernalization, and bulb size are important factors in the production of lily bulbs and flowers. This study aimed to verify the influence of vernalization of bulbs on flowering cut lily plants, as well as the impact of size and shape of harvest on the production and quality of flowers and bulbs. In turn, the way the stems of the plants used for cut-flower production are cropped is of higher importance for the production of new flower bulbs. In this sense, the experiment was conducted in Viçosa, MG, in a greenhouse in a randomized block design, in split splot scheme with three replications, in which the vernalization periods (25, 35 and 45 days at 4 ± 1 C) constituted the plots; bulb sizes (diameters of 3.2-3.8 cm; 2.5-3.2 cm 1.9- and 2.5 cm), subplots and ways to harvest (full harvest of the stem at the required length for the commercial harvest of the flower, commercial stem harvest at the commercial length, maintaining 10cm of stem in the soil; removal of the floral buds as soon as their appearance is observed and harvest at the end of the season), the sub subplots. The bulbs were planted in beds, with 15 x 20 cm spacing. It was evaluated the number of plants that flowered and the number of flowers, the length and the diameter of the floral buds, fresh and dry weights, diameter and plant height as well as number, perimeter and amount of fresh and dry bulbs. There was a decrease in the plant height with the increase of the vernalization period and a reduction of the diameter of the planted bulbs, as well as of the number and the fresh and dry weights of the produced buds. The production of flowers and buds in number, size and weight was directly proportional to the size of the planted bulbs, while the form of harvest with removal of flower buds increased the number, the perimeter and the fresh and dry weights of the buds. Bulbs with diameter between 3.2 - 3.8 cm, stored for 25 days in cold chamber enable greater production of flowers and the highest stem height, factors that favor the increase in market value.

scholarly journals Yield and vegetative growth of cactus pear at different spacings and under chemical fertilizations

2016 ◽  
Vol 20 (6) ◽  
pp. 564-569 ◽  
Author(s):  
João A. da Silva ◽  
Sérgio L. R. Donato ◽  
Paulo E. R. Donato ◽  
Evilasio dos S. Souza ◽  
Milton C. Padilha Júnior ◽  
...  
Keyword(s):  
Plant Growth ◽  
Plant Height ◽  
Vegetative Growth ◽  
Dry Matter ◽  
Block Design ◽  
Plant Age ◽  
Cactus Pear ◽  
Area Index ◽  
Randomized Block Design

ABSTRACT The objective was to evaluate the effect of different spacings and mineral fertilizations on cactus pear growth and production in a randomized block design, with three replicates, in a 3 x 4 factorial scheme: three spacings, 1.00 x 0.50 m, 2.00 x 0.25 m and 3.00 x 1.00 x 0.25 m, and four fertilizations, 000-000-000, 000-150-000, 200-150-000 and 200-150-100 kg ha-1 of N, P2O5 and K2O, respectively. Plant growth was evaluated between 90 and 390 days and production and growth were evaluated at 620 days after planting. There were significant interactions between spacing and fertilization for plant height, number of cladodes and cladode area index from 90 to 390 days and for production of fresh and dry matter at 620 days after planting. Spacing influenced cladode area index, while fertilization influenced plant height, number of cladodes and cladode area index at 620 days after planting. Plant height showed cubic effect for the days after planting. Number of cladodes and cladode area index were dependent on spacing, fertilization and plant age, and fitted to cubic models. The best results of growth and production of fresh and dry matter are associated with NPK and NP fertilizations and the spacing of 1.00 x 0.50 m.

scholarly journals Response of growth and yield of two soybean varieties to seed pre-treatment applications

2021 ◽  
Vol 883 (1) ◽  
pp. 012052
Author(s):  
N Herawati ◽  
A R Aisah ◽  
I Mardian ◽  
B N Hidayah ◽  
B T R Erawati
Keyword(s):  
Plant Height ◽  
Seed Treatment ◽  
Seed Quality ◽  
Block Design ◽  
Growth And Yield ◽  
Agronomic Crops ◽  
Randomized Block Design ◽  
Two Factors ◽  
Pre Treatment ◽  
Four Levels

Abstract Plant growth is influenced by seed quality. Seeds need to be treated to prevent pest and disease disorders or to increase seed germination. Soybean planting was carried out in this study by the treatment of varieties and seed pre-treatment application before planting. The study aimed to measure the growth and yield of soybeans by varieties and seed treatment before planting, carried out in the Village of Nggembe, District of Bolo, Bima Regency. The study used factorial randomized block design with two factors. The first factor was soybean varieties consisting of two levels, namely Devon and Dena varieties, and the second factor was the application of pre-planting seed treatments consisting of four levels namely Cruiser, Marshall, Agrisoy, and without seed treatment, each treatment was repeated three times. Observations were made on the performance of agronomic crops and soybean yields. The results showed that the treatment of soybean varieties and the application of seed treatment had a significant influence on plant height and soybean productivity, and both treatments had interactions on parameters of plant height, number of filled pods, weight of 100 seeds, and soybean productivity with the best results successively produced by a combination of Devon-Control, Devon-Marshall, Devon-Agrisoy, and Dena-Cruiser.

scholarly journals Genetic Analysis of Some Genotypes of Indian Mustard (Brassica juncea L.) for Yield and Yield Attributing Traits

2021 ◽  
pp. 51-60
Author(s):  
A. M. Pradhan ◽  
M. Roy Choudhury ◽  
A. Sawarkar ◽  
S. Das
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Indian Mustard ◽  
Correlation Study ◽  
Biotic And Abiotic Stress ◽  
Randomized Block Design ◽  
Additive Gene ◽  
Positive Direct

The current investigation was carried out to examine the selection criteria for yield improvement in selected genotypes of Indian mustard. Twenty-four genotypes of Indian mustard were evaluated for seed yield and yield attributing characters with randomized block design with three replications. The analysis of variance showed significant differences among all the 24 genotypes against all the characters. The phenotypic and genotypic coefficient of variation were higher for most of the traits like seed yield per plant, number of secondary branches per plant and number of siliquae per plant. High heritability coupled with high genetic advance in percent of mean was registered for number of siliquae per plant, number of primary and secondary branches per plant, plant height, 1000 seed weight, siliqua length per plant and seed yield per plant suggesting predominant role of additive gene action for expression of these traits. The correlation study revealed that seed yield per plant was positively and significantly correlated with number of primary and secondary branches per plant, number of siliquae per plant, siliqua length per plant and 1000 seed weight at both phenotypic and genotypic level. The traits namely, number of secondary branches per plant recorded as highest positive direct effect followed by number of seeds per siliqua, number of siliquae per plant and plant height. Therefore, they may be carried out further evaluation in multilocational trials, biotic and abiotic stress like environmental conditions to check their stability and adaptability.

scholarly journals Optimasi Dosis Pupuk Kandang Ayam dan NPK pada Budidaya Kubis Bunga (Brassica oleracea var. Botrytis L.)

2021 ◽  
Vol 2 (1) ◽  
pp. 32
Author(s):  
Irpan Gunawan ◽  
Atak Tauhid ◽  
Isna Tustiyani
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Block Design ◽  
Chicken Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Affected Plant ◽  
Two Factors ◽  
Number Of Leaves ◽  
Npk Fertilizer

<p><em>Cauliflower is one of the vegetables for consumers. The demand for cauliflower was rising so it must be scaled up with fertilizer. The purpose of this study was to study the effect of chicken manure and NPK fertilizer on the growth and yield of cauliflower. The study was conducted in Sukasenang Village, Banyuresmi Sub-district, Garut Regency from July to August 2019. The study used a Randomized Block Design (RBD) in two factors each of the 3 rates with 2 replications. The first factor was the rates of chicken manure which consisted of 0, 10 and 20 tons ha<sup>-1</sup>; the second factor was NPK fertilizer which consists of 0, 100 and 200 kg ha<sup>-1</sup>. The parameter of this research was plant height, number of leaves, leaf area, weight and diameter crud. The results showed that there was no interaction between the chicken manure and NPK fertilizer. The treatment of 20 tons ha<sup>-1</sup> chicken manure affected the variable plant height, the number of leaves and leaf area. The rates of 200 kg ha<sup>-1</sup> NPK fertilizer had affected plant height, number of leaves, weight and diameter crud.</em></p>

Sign in / Sign up

Export Citation Format

Share Document