scholarly journals Microencapsulation Technology a Holistic Approach in the Field of Pharmaceutical Sciences a Review

2021 ◽  
Vol 71 (2) ◽  
Author(s):  
Devendra Singh Lodhi ◽  
Aakash Singh Panwar ◽  
Pradeep Golani ◽  
Megha Verma ◽  
Namrata Jain ◽  
...  
Keyword(s):  
Holistic Approach ◽  
Medication Administration ◽  
Nano Particles ◽  
Pharmaceutical Sciences ◽  
Small Object ◽  
Multiple Treatment ◽  
Treatment Regimens ◽  
Self Assembling ◽  
Medication Delivery ◽  
Wide Range

Microencapsulation is a technique that uses a coating to encapsulate microscopic particles or droplets in order to generate miniature capsules with therapeutic properties. The substance contained within the microcapsule is referred to as the core, internal phase, or fill, whereas the wall is referred to as a shell, coating, or membrane. A microcapsule is a small object that contains essential items, internal components, or fillers and is encased by a shell, cover, or membrane. Microcapsules range in size from 1 to 1000 micrometres. This approach is frequently used for medication administration, molecular protection, and robustness. The microencapsulation programme has been established as a different delivery mechanism for multiple treatment regimens and offers potential benefits beyond those of normal medication delivery systems. Microencapsulation is a well-established review dedicated to the preparation, properties, and applications of individually encapsulated novel small particles, as well as significant improvements to tried-and-tested techniques relevant to micro and nano particles and their use in a wide range of industrial, engineering, pharmaceutical, biotechnology, and research applications. Its scope extends beyond conventional microcapsules to all other small particulate systems, such as self-assembling structures that involve preparative manipulation.

Factors Affecting Molecular Self-Assembly and Its Mechanism

2012 ◽  
Vol 9 (1) ◽  
pp. 43 ◽  
Author(s):  
Hueyling Tan
Keyword(s):  
Self Assembly ◽  
Building Blocks ◽  
Molecular Engineering ◽  
Molecular Structures ◽  
Polymer Science ◽  
New Approach ◽  
Factors Affecting ◽  
Dna Structures ◽  
Self Assembling ◽  
Wide Range

Molecular self-assembly is ubiquitous in nature and has emerged as a new approach to produce new materials in chemistry, engineering, nanotechnology, polymer science and materials. Molecular self-assembly has been attracting increasing interest from the scientific community in recent years due to its importance in understanding biology and a variety of diseases at the molecular level. In the last few years, considerable advances have been made in the use ofpeptides as building blocks to produce biological materials for wide range of applications, including fabricating novel supra-molecular structures and scaffolding for tissue repair. The study ofbiological self-assembly systems represents a significant advancement in molecular engineering and is a rapidly growing scientific and engineering field that crosses the boundaries ofexisting disciplines. Many self-assembling systems are rangefrom bi- andtri-block copolymers to DNA structures as well as simple and complex proteins andpeptides. The ultimate goal is to harness molecular self-assembly such that design andcontrol ofbottom-up processes is achieved thereby enabling exploitation of structures developed at the meso- and macro-scopic scale for the purposes oflife and non-life science applications. Such aspirations can be achievedthrough understanding thefundamental principles behind the selforganisation and self-synthesis processes exhibited by biological systems.

Phyto-Facilitated Bimetallic ZnFe2O4 Nanoparticles via Boswellia carteri: Synthesis, Characterization and Anti-Cancer Activity.

2020 ◽  
Vol 21 ◽  
Author(s):  
Amer Imraish ◽  
Afnan Al-Hunaiti ◽  
Tuqa Abu-Thiab ◽  
Abed Al-Qader Ibrahim ◽  
Eman Hwaitat ◽  
...  
Keyword(s):  
Anticancer Activity ◽  
Cell Lines ◽  
Metallic Nanoparticles ◽  
Bimetallic Nanoparticles ◽  
Iron Chloride ◽  
Nano Particles ◽  
Adverse Side Effect ◽  
Wide Range ◽  
Anti Cancer ◽  
Znfe2o4 Nanoparticles

Background: The growing unsatisfaction toward the available traditional chemotherapeutic agents enhanced the need to develop new methods for obtaining materials with more effective and safe anti-cancer properties. Over the past few years, usage of metallic nanoparticles has been a target for researchers of different scientific and commercial fields due to their tiny sizes, environment friendly properties and wide range applications. To overcome the obstacles of traditional physical and chemical methods for synthesis of such nanoparticles, a new less expensive and eco-friendly method has been adopted using natural existing organisms as a reducing agent to mediate synthesis of the desired metallic nanoparticles from their precursors, a process called green biosynthesis of nanoparticles. Objective: Here in the present study, zinc iron bimetallic nanoparticles (ZnFe2O4) were synthesized via an aqueous extract of Boswellia Carteri resin mixed with zinc acetate and iron chloride precursors, and they were tested for their anticancer activity. Methods: Various analytic methods were applied for the characterization of the Phyto synthesized ZnFe2O4 and they were tested for their anticancer activity against MDA-MB-231, K562, MCF-7 cancer cell lines and normal fibroblasts. Results: Our results demonstrate the synthesis of cubic structured bimetallic nanoparticles ZnFe2O4 with an average diameter 10.54 nm. MTT cytotoxicity assay demonstrate that our phyto-synthesized ZnFe2O4 nanoparticles exhibited a selective and potent anticancer activity against K562 and MDA-MB-231 cell lines with IC50 values 4.53 µM and 4.19 µM, respectively. Conclusion: In conclusion, our bio synthesized ZnFe2O4 nano particles show a promising environmentally friendly of low coast chemotherapeutic approach against selective cancers with a predicted low adverse side effect toward normal cells. Further in vivo advanced animal research should be done to execute their applicability in living organisms.

scholarly journals Self-assembling ferritin-dendrimer nanoparticles for targeted delivery of nucleic acids to myeloid leukemia cells

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Federica Palombarini ◽  
Silvia Masciarelli ◽  
Alessio Incocciati ◽  
Francesca Liccardo ◽  
Elisa Di Fabio ◽  
...  
Keyword(s):  
Nucleic Acid ◽  
Targeted Delivery ◽  
Myeloid Leukemia ◽  
Electrostatic Interactions ◽  
Archaeoglobus Fulgidus ◽  
Leukemia Cells ◽  
Cellular Delivery ◽  
Self Assembling ◽  
Wide Range ◽  
Hybrid Nanoparticle

Abstract Background In recent years, the use of ferritins as nano-vehicles for drug delivery is taking center stage. Compared to other similar nanocarriers, Archaeoglobus fulgidus ferritin is particularly interesting due to its unique ability to assemble-disassemble under very mild conditions. Recently this ferritin was engineered to get a chimeric protein targeted to human CD71 receptor, typically overexpressed in cancer cells. Results Archaeoglobus fulgidus chimeric ferritin was used to generate a self-assembling hybrid nanoparticle hosting an aminic dendrimer together with a small nucleic acid. The positively charged dendrimer can indeed establish electrostatic interactions with the chimeric ferritin internal surface, allowing the formation of a protein-dendrimer binary system. The 4 large triangular openings on the ferritin shell represent a gate for negatively charged small RNAs, which access the internal cavity attracted by the dense positive charge of the dendrimer. This ternary protein-dendrimer-RNA system is efficiently uptaken by acute myeloid leukemia cells, typically difficult to transfect. As a proof of concept, we used a microRNA whose cellular delivery and induced phenotypic effects can be easily detected. In this article we have demonstrated that this hybrid nanoparticle successfully delivers a pre-miRNA to leukemia cells. Once delivered, the nucleic acid is released into the cytosol and processed to mature miRNA, thus eliciting phenotypic effects and morphological changes similar to the initial stages of granulocyte differentiation. Conclusion The results here presented pave the way for the design of a new family of protein-based transfecting agents that can specifically target a wide range of diseased cells. Graphic abstract

scholarly journals Holistic Approach to Design, Test, and Optimize Stand-Alone SOFC-Reformer Systems

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 348
Author(s):  
Michael Höber ◽  
Benjamin Königshofer ◽  
Philipp Wachter ◽  
Gjorgji Nusev ◽  
Pavle Boskoski ◽  
...  
Keyword(s):  
Rural Communities ◽  
High Efficiency ◽  
Diffusion Processes ◽  
Holistic Approach ◽  
Maximum Error ◽  
Gas Diffusion ◽  
Electrochemical Analysis ◽  
Internal Reforming ◽  
Operation Conditions ◽  
Wide Range

Reliable electrical and thermal energy supplies are basic requirements for modern societies and their food supply. Stand-alone stationary power generators based on solid oxide fuel cells (SOFC) represent an attractive solution to the problems of providing the energy required in both rural communities and in rurally-based industries such as those of the agricultural industry. The great advantages of SOFC-based systems are high efficiency and high fuel flexibility. A wide range of commercially available fuels can be used with no or low-effort pre-treatment. In this study, a design process for stand-alone system consisting of a reformer unit and an SOFC-based power generator is presented and tested. An adequate agreement between the measured and simulated values for the gas compositions after a reformer unit is observed with a maximum error of 3 vol% (volume percent). Theoretical degradation free operation conditions determined by employing equilibrium calculations are identified to be steam to carbon ratio (H2O/C) higher 0.6 for auto-thermal reformation and H2O/C higher 1 for internal reforming. The produced gas mixtures are used to fuel large planar electrolyte supported cells (ESC). Current densities up to 500 mA/cm2 at 0.75 V are reached under internal reforming conditions without degradation of the cells anode during the more than 500 h long-term test run. More detailed electrochemical analysis of SOFCs fed with different fuel mixtures showed that major losses are caused by gas diffusion processes.

scholarly journals De novo design of self-assembling helical protein filaments

Science ◽  
2018 ◽  
Vol 362 (6415) ◽  
pp. 705-709 ◽  
Author(s):  
Hao Shen ◽  
Jorge A. Fallas ◽  
Eric Lynch ◽  
William Sheffler ◽  
Bradley Parry ◽  
...  
Keyword(s):  
De Novo ◽  
Computational Design ◽  
Building Blocks ◽  
Repeat Units ◽  
Self Assembling ◽  
Wide Range ◽  
Helical Protein ◽  
Monomeric Proteins

We describe a general computational approach to designing self-assembling helical filaments from monomeric proteins and use this approach to design proteins that assemble into micrometer-scale filaments with a wide range of geometries in vivo and in vitro. Cryo–electron microscopy structures of six designs are close to the computational design models. The filament building blocks are idealized repeat proteins, and thus the diameter of the filaments can be systematically tuned by varying the number of repeat units. The assembly and disassembly of the filaments can be controlled by engineered anchor and capping units built from monomers lacking one of the interaction surfaces. The ability to generate dynamic, highly ordered structures that span micrometers from protein monomers opens up possibilities for the fabrication of new multiscale metamaterials.

Fabrication of periodic microscale stripes of silver by laser interference induced forward transfer and their SERS properties

2021 ◽  
Author(s):  
Huijuan Shen ◽  
Yaode Wang ◽  
Liang Cao ◽  
Ying Xie ◽  
Lu Wang ◽  
...  
Keyword(s):  
Film Thickness ◽  
Laser Fluence ◽  
Nano Particles ◽  
Good Resolution ◽  
Laser Interference ◽  
Ag Nps ◽  
Wide Range ◽  
Forward Transfer ◽  
Stripe Structure ◽  
Average Size

Abstract The micro-stripe structure was prepared by laser interference induced forward transfer (LIIFT) technique, composed of Ag nano-particles (NPs). The effects of the film thickness with the carbon nano-particles mixed polyimide (CNPs@PI), Ag film thickness, and laser fluence were studied on the transferred micro-stripe structure. The periodic Ag micro-stripe with good resolution was obtained in a wide range of CNPs@PI film thickness from ~ 0.5 μm to ~ 1.0 μm for the Ag thin film ~ 20 nm. The distribution of the Ag NPs composing the micro-stripe was compact. Nevertheless, the average size of the transferred Ag NPs was increased from ~ 41 nm to ~ 197 nm with the change of the Ag donor film from ~ 10 nm to ~ 40 nm. With the increase of the laser fluence from 102 mJ•cm-2 to 306 mJ•cm-2 per-beam, the transferred Ag NPs became aggregative, improving the resolution of the corresponding micro-stripe. Finally, the transferred Ag micro-stripe exhibited the significant surface enhanced Raman scattering (SERS) property for rhodamine B (RhB). While the concentration of the RhB reached 10-10 mol•L-1, the Raman characteristic peaks of the RhB were still observed clearly at 622 cm-1, 1359 cm-1, and 1649 cm-1. These results indicate that the transferred Ag micro-stripe has potential application as a SERS chip in drug and food detection.

The Impact of Delayed Symptomatic Treatment Implementation in the Intensive Care Unit

Healthcare ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 35
Author(s):  
Lesley Meng ◽  
Krzysztof Laudanski ◽  
Mariana Restrepo ◽  
Ann Huffenberger ◽  
Christian Terwiesch
Keyword(s):  
Intensive Care Unit ◽  
Intensive Care ◽  
Medical Center ◽  
Academic Medical Center ◽  
Symptomatic Treatment ◽  
Medication Administration ◽  
Average Delay ◽  
Treatment Implementation ◽  
Medication Delivery ◽  
The Impact

We estimated the harm related to medication delivery delays across 12,474 medication administration instances in an intensive care unit using retrospective data in a large urban academic medical center between 2012 and 2015. We leveraged an instrumental variables (IV) approach that addresses unobserved confounds in this setting. We focused on nurse shift changes as disruptors of timely medication (vasodilators, antipyretics, and bronchodilators) delivery to estimate the impact of delay. The average delay around a nurse shift change was 60.8 min (p < 0.001) for antipyretics, 39.5 min (p < 0.001) for bronchodilators, and 57.1 min (p < 0.001) for vasodilators. This delay can increase the odds of developing a fever by 32.94%, tachypnea by 79.5%, and hypertension by 134%, respectively. Compared to estimates generated by a naïve regression approach, our IV estimates tend to be higher, suggesting the existence of a bias from providers prioritizing more critical patients.

Congenital disorders

2018 ◽  
pp. 160-163
Author(s):  
Sowmiya Moorthie
Keyword(s):  
Developmental Disorders ◽  
Genetic Disorders ◽  
Holistic Approach ◽  
Congenital Disorders ◽  
Mortality And Morbidity ◽  
Specialist Services ◽  
Wide Range ◽  
Effective Delivery ◽  
The Life Course ◽  
Preventative Services

Congenital disorders encompass a wide range of conditions (e.g. genetic disorders, foetal disease, and developmental disorders) that occur before birth and are an important contributor to mortality and morbidity worldwide. Congenital disorders can be identified at different life stages and effective health services take a holistic approach to their care and prevention. This involves both population health and specialist services across the life course. Systematic collection of data on the types, prevalence, severity, and outcomes of congenital disorders, along with analysis and interpretation of data helps to inform appropriate planning of care and preventative services and activities. Important concepts in relation to congenital disorders, prevention activities, and key challenges to their effective delivery are described in this chapter.

Editorial to Child and Adolescence Psychopharmacology

2016 ◽  
Vol 49 (06) ◽  
pp. 217-218
Author(s):  
G. Juckel
Keyword(s):  
Young Patients ◽  
Child And Adolescent ◽  
Child And Adolescent Psychiatry ◽  
Mental Illnesses ◽  
Educational Strategies ◽  
Behavioral Disturbances ◽  
Treatment Regimens ◽  
Psychopharmacological Treatment ◽  
Wide Range ◽  
Meta Analyses

The editors of Pharmacopsychiatry have decided in 2016 to prepare special issues regularly in order provide our readers volumes of the journal with a thematic focus 1. The first such special issue is dedicated to the field of child and adolescent psychopharmacology. Many young patients are treated with psychotherapeutic, but also pharmacotherapeutic, methods worldwide. Most of our psychopharmacological agents are not approved by the federal institutions for persons under 18 years old. However, severe mental illnesses like schizophrenia, depression, anxiety, ADHD, and bipolar disorder frequently require pharmacological treatments in children and adolescents. We also see a wide range of rather unspecific emotional and behavioral disturbances up to excitation crises or suicidal acts in this young population, so that we see the necessity for standardized and valid psychopharmacological treatment regimens based on meta-analyses, randomized controlled trials, and guidelines 2. Child and adolescent psychiatry is unfortunately far away from this; industry-supported research is rare in this area, but also not all child and adolescent psychiatrists see the importance of psychopharmacological treatment and trust specific psychotherapy, psychoeducation, and educational strategies. These are all extremely important treatments, but one can/should think that psychopharmacotherapy is an important addition and often a cornerstone for the other treatments.

Sign in / Sign up

Export Citation Format

Share Document