Fabrication of periodic microscale stripes of silver by laser interference induced forward transfer and their SERS properties

2021 ◽  
Author(s):  
Huijuan Shen ◽  
Yaode Wang ◽  
Liang Cao ◽  
Ying Xie ◽  
Lu Wang ◽  
...  
Keyword(s):  
Film Thickness ◽  
Laser Fluence ◽  
Nano Particles ◽  
Good Resolution ◽  
Laser Interference ◽  
Ag Nps ◽  
Wide Range ◽  
Forward Transfer ◽  
Stripe Structure ◽  
Average Size

Abstract The micro-stripe structure was prepared by laser interference induced forward transfer (LIIFT) technique, composed of Ag nano-particles (NPs). The effects of the film thickness with the carbon nano-particles mixed polyimide (CNPs@PI), Ag film thickness, and laser fluence were studied on the transferred micro-stripe structure. The periodic Ag micro-stripe with good resolution was obtained in a wide range of CNPs@PI film thickness from ~ 0.5 μm to ~ 1.0 μm for the Ag thin film ~ 20 nm. The distribution of the Ag NPs composing the micro-stripe was compact. Nevertheless, the average size of the transferred Ag NPs was increased from ~ 41 nm to ~ 197 nm with the change of the Ag donor film from ~ 10 nm to ~ 40 nm. With the increase of the laser fluence from 102 mJ•cm-2 to 306 mJ•cm-2 per-beam, the transferred Ag NPs became aggregative, improving the resolution of the corresponding micro-stripe. Finally, the transferred Ag micro-stripe exhibited the significant surface enhanced Raman scattering (SERS) property for rhodamine B (RhB). While the concentration of the RhB reached 10-10 mol•L-1, the Raman characteristic peaks of the RhB were still observed clearly at 622 cm-1, 1359 cm-1, and 1649 cm-1. These results indicate that the transferred Ag micro-stripe has potential application as a SERS chip in drug and food detection.

Electron-Phonon Non-Equilibrium in Nanoscale Gold Films

2008 ◽  
Author(s):  
Arvind Pattamatta ◽  
Cyrus K. Madnia
Keyword(s):  
Film Thickness ◽  
Pulse Duration ◽  
Laser Fluence ◽  
Laser Heating ◽  
Gold Film ◽  
Melting Time ◽  
Gold Films ◽  
Energy Carriers ◽  
Wide Range ◽  
Non Equilibrium

Ultrashort-pulsed laser irradiation on metals creates a thermal non-equilibrium between electrons and the phonons. Previous computational studies used the two-temperature model and its variants to model this non-equilibrium. However, when the laser pulse duration is smaller than the relaxation time of the energy carriers or when the carriers mean free path is larger than the material dimension, these macroscopic models fail to capture the physics accurately. In this paper, the non-equilibrium between energy carriers is modeled via numerical solution of the Boltzmann Transport Model (BTM) for electrons and phonons which is applicable over a wide range of length and time scales. The BTM is solved using the Discontinuous Galerkin Finite Element Method for spatial discretization and the three-step Runge Kutta temporal discretization. Temperature dependant electron-phonon coupling factor and electron heat capacity are used due to the strong electron-phonon non-equilibrium considered in this study. The results from the proposed model is compared with existing experimental studies on laser heating of macroscale materials. The model is then used to study laser heating of gold films, by varying parameters such as the film thickness, laser fluence and pulse duration. It is found that the temporal evolution of electron and phonon temperatures in nanometer size gold films are very different from the macroscale films. For a given laser fluence and pulse duration, the peak electron temperature increases with a decrease in the thickness of the gold film. Both film size as well as laser fluence significantly affect the melting time. For a fluence of 5000 J/m2, and a pulse duration of 75 fs, gold films of thickness smaller than 200 nm melt before reaching electron-phonon equilibrium. However, for the film thickness of 2000 nm, even with the highest laser fluence examined, the electrons and phonons reach equilibrium and the gold film does not melt.

Laser Induced Forward Transfer: Topography Dependence of Laser Fluence and Thickness for Titanium Film

2018 ◽  
Author(s):  
Jie Zhao ◽  
Yongxiang Hu ◽  
Zhenqiang Yao
Keyword(s):  
Laser Fluence ◽  
Physical Mechanism ◽  
Sacrificial Layer ◽  
High Melting ◽  
High Melting Point ◽  
Titanium Film ◽  
Nanosecond Pulses ◽  
Wide Range ◽  
Forward Transfer ◽  
Ti Films

Compared with other metals, titanium has a wide range of applications in laser induced forward transfer (LIFT) due to its unique properties of low thermal conductivity and high melting point. In general, the titanium film is used as a sacrificial layer or transferred material in LIFT with different laser fluence. In this study, four different topography types are classified under the laser irradiation of ultraviolet nanosecond pulses. For Ti films with different thicknesses, probability distribution of these types is provided to demonstrate how topographies evolve with the increasing laser fluence. Through the research, the understanding of the physical mechanism of titanium film would be deepened.

Fabrication of periodical micro-stripe structure of polyimide by laser interference induced forward transfer technique

2020 ◽  
pp. 148466
Author(s):  
Huijuan Shen ◽  
Yaode Wang ◽  
Liang Cao ◽  
Ying Xie ◽  
Ying Wang ◽  
...  
Keyword(s):  
Laser Interference ◽  
Forward Transfer ◽  
Stripe Structure

Validated Stability Indicating HPTLC Method for the Estimation of Amoxapine in Different Stress Conditions

2019 ◽  
Vol 15 (3) ◽  
pp. 273-279
Author(s):  
Shweta G. Rangari ◽  
Nishikant A. Raut ◽  
Pradip W. Dhore
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Degradation Products ◽  
Analysis Data ◽  
Peak Height ◽  
Good Resolution ◽  
Stability Indicating ◽  
Limit Of Quantitation ◽  
Wide Range ◽  
Hptlc Method

Background:The unstable and/or toxic degradation products may form due to degradation of drug which results into loss of therapeutic activity and lead to life threatening condition. Hence, it is important to establish the stability characteristics of drug in various conditions such as in temperature, light, oxidising agent and susceptibility across a wide range of pH values.Introduction:The aim of the proposed study was to develop simple, sensitive and economic stability indicating high performance thin layer chromatography (HPTLC) method for the quantification of Amoxapine in the presence of degradation products.Methods:Amoxapine and its degraded products were separated on precoated silica gel 60F254 TLC plates by using mobile phase comprising of methanol: toluene: ammonium acetate (6:3:1, v/v/v). The densitometric evaluation was carried out at 320 nm in reflectance/absorbance mode. The degradation products obtained as per ICH guidelines under acidic, basic and oxidative conditions have different Rf values 0.12, 0.26 and 0.6 indicating good resolution from each other and pure drug with Rf: 0.47. Amoxapine was found to be stable under neutral, thermal and photo conditions.Results:The method was validated as per ICH Q2 (R1) guidelines in terms of accuracy, precision, ruggedness, robustness and linearity. A good linear relationship between concentration and response (peak area and peak height) over the range of 80 ng/spot to 720 ng/spot was observed from regression analysis data showing correlation coefficient 0.991 and 0.994 for area and height, respectively. The limit of detection (LOD) and limit of quantitation (LOQ) for area were found to be 1.176 ng/mL and 3.565 ng/mL, whereas for height, 50.063 ng/mL and 151.707 ng/mL respectively.Conclusion:The statistical analysis confirmed the accuracy, precision and selectivity of the proposed method which can be effectively used for the analysis of amoxapine in the presence of degradation products.

Phyto-Facilitated Bimetallic ZnFe2O4 Nanoparticles via Boswellia carteri: Synthesis, Characterization and Anti-Cancer Activity.

2020 ◽  
Vol 21 ◽  
Author(s):  
Amer Imraish ◽  
Afnan Al-Hunaiti ◽  
Tuqa Abu-Thiab ◽  
Abed Al-Qader Ibrahim ◽  
Eman Hwaitat ◽  
...  
Keyword(s):  
Anticancer Activity ◽  
Cell Lines ◽  
Metallic Nanoparticles ◽  
Bimetallic Nanoparticles ◽  
Iron Chloride ◽  
Nano Particles ◽  
Adverse Side Effect ◽  
Wide Range ◽  
Anti Cancer ◽  
Znfe2o4 Nanoparticles

Background: The growing unsatisfaction toward the available traditional chemotherapeutic agents enhanced the need to develop new methods for obtaining materials with more effective and safe anti-cancer properties. Over the past few years, usage of metallic nanoparticles has been a target for researchers of different scientific and commercial fields due to their tiny sizes, environment friendly properties and wide range applications. To overcome the obstacles of traditional physical and chemical methods for synthesis of such nanoparticles, a new less expensive and eco-friendly method has been adopted using natural existing organisms as a reducing agent to mediate synthesis of the desired metallic nanoparticles from their precursors, a process called green biosynthesis of nanoparticles. Objective: Here in the present study, zinc iron bimetallic nanoparticles (ZnFe2O4) were synthesized via an aqueous extract of Boswellia Carteri resin mixed with zinc acetate and iron chloride precursors, and they were tested for their anticancer activity. Methods: Various analytic methods were applied for the characterization of the Phyto synthesized ZnFe2O4 and they were tested for their anticancer activity against MDA-MB-231, K562, MCF-7 cancer cell lines and normal fibroblasts. Results: Our results demonstrate the synthesis of cubic structured bimetallic nanoparticles ZnFe2O4 with an average diameter 10.54 nm. MTT cytotoxicity assay demonstrate that our phyto-synthesized ZnFe2O4 nanoparticles exhibited a selective and potent anticancer activity against K562 and MDA-MB-231 cell lines with IC50 values 4.53 µM and 4.19 µM, respectively. Conclusion: In conclusion, our bio synthesized ZnFe2O4 nano particles show a promising environmentally friendly of low coast chemotherapeutic approach against selective cancers with a predicted low adverse side effect toward normal cells. Further in vivo advanced animal research should be done to execute their applicability in living organisms.

scholarly journals Direct Laser Interference Patterning of Diffraction Gratings in Safrofilcon-A Hydrogel: Fabrication and Hydration Assessment

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 679
Author(s):  
Daniel Sola ◽  
Stephan Milles ◽  
Andrés F. Lasagni
Keyword(s):  
Laser Fluence ◽  
Contact Lenses ◽  
Laser Source ◽  
Spatial Period ◽  
Laser Interference ◽  
Periodic Patterns ◽  
Hydration Properties ◽  
Water Contact ◽  
Direct Laser ◽  
Direct Laser Interference Patterning

Refractive index modification by laser micro-structuration of diffractive optical devices in ophthalmic polymers has recently been applied for refractive correction in the fields of optics and ophthalmology. In this work, Safrofilcon-A hydrogel, used as soft contact lenses, was processed by direct laser interference patterning (DLIP) to fabricate linear periodic patterns on the surface of the samples. Periodic modulation of the surface was attained under two-beam interference by using a Q-switched laser source with emission at 263 nm and 4 ns pulse duration. Features of processed areas were studied as a function of both the interference spatial period and the laser fluence. Optical confocal microscopy used to evaluate the topography of the processed samples showed that both structured height and surface roughness increased with laser fluence. Static water contact angle (WCA) measurements were carried out with deionized water droplets on the structured areas to evaluate the hydration properties of DLIP structures. It was observed that the laser structured areas induced a delay in the hydration process. Finally, microstructural changes induced in the structured areas were assessed by confocal micro-Raman spectroscopy showing that at low laser fluences the polymer structure remained almost unaltered. In addition, Raman spectra of hydrated samples recovered the original shape of areas structured at low laser fluence.

scholarly journals Influence of Alumina Nanofibers Sintered by the Spark Plasma Method on Nickel Mechanical Properties

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 548 ◽  
Author(s):  
Leonid Agureev ◽  
Valeriy Kostikov ◽  
Zhanna Eremeeva ◽  
Svetlana Savushkina ◽  
Boris Ivanov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Strength Properties ◽  
Alumina Nanoparticles ◽  
Metal Powders ◽  
Wide Range ◽  
The Matrix ◽  
Spark Plasma ◽  
Average Size

The article presents the study of alumina nanoparticles’ (nanofibers) concentration effect on the strength properties of pure nickel. The samples were obtained by spark plasma sintering of previously mechanically activated metal powders. The dependence of the grain size and the relative density of compacts on the number of nanofibers was investigated. It was found that with an increase in the concentration of nanofibers, the average size of the matrix particles decreased. The effects of the nanoparticle concentration (0.01–0.1 wt.%) on the elastic modulus and tensile strength were determined for materials at 25 °C, 400 °C, and 750 °C. It was shown that with an increase in the concentration of nanofibers, a 10–40% increase in the elastic modulus and ultimate tensile strength occurred. A comparison of the mechanical properties of nickel in a wide range of temperatures, obtained in this work with materials made by various technologies, is carried out. A description of nanofibers’ mechanisms of influence on the structure and mechanical properties of nickel is given. The possible impact of impurity phases on the properties of nickel is estimated. The tendency of changes in the mechanical properties of nickel, depending on the concentration of nanofibers, is shown.

scholarly journals Reactivity and Chemical Sintering of Carey Lea Silver Nanoparticles

Nanomaterials ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 1525
Author(s):  
Sergey Vorobyev ◽  
Elena Vishnyakova ◽  
Maxim Likhatski ◽  
Alexander Romanchenko ◽  
Ivan Nemtsev ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Silver Nanoparticles ◽  
Flexible Electronics ◽  
Photoelectron Spectroscopy ◽  
Colloidal Solutions ◽  
Ag Nps ◽  
Wide Range ◽  
Carboxylic Groups ◽  
The Media ◽  
Sulfide Ions

Carey Lea silver hydrosol is a rare example of very concentrated colloidal solutions produced with citrate as only protective ligands, and prospective for a wide range of applications, whose properties have been insufficiently studied up to now. Herein, the reactivity of the immobilized silver nanoparticles toward oxidation, sulfidation, and sintering upon their interaction with hydrogen peroxide, sulfide ions, and chlorocomplexes of Au(III), Pd(II), and Pt(IV) was investigated using SEM and X-ray photoelectron spectroscopy (XPS). The reactions decreased the number of carboxylic groups of the citrate-derived capping and promoted coalescence of 7 nm Ag NPs into about 40 nm ones, excluding the interaction with hydrogen peroxide. The increased nanoparticles form loose submicrometer aggregates in the case of sulfide treatment, raspberry-like micrometer porous particles in the media containing Pd(II) chloride, and densely sintered particles in the reaction with inert H2PtCl6 complexes, probably via the formation of surface Ag-Pt alloys. The exposure of Ag NPs to HAuCl4 solution produced compact Ag films along with nanocrystals of Au metal and minor Ag and AgCl. The results are promising for chemical ambient temperature sintering and rendering silver-based nanomaterials, for example, for flexible electronics, catalysis, and other applications.

scholarly journals Preparation of Silver Nanoparticles and Their Industrial and Biomedical Applications: A Comprehensive Review

2015 ◽  
Vol 2015 ◽  
pp. 1-16 ◽  
Author(s):  
Adnan Haider ◽  
Inn-Kyu Kang
Keyword(s):  
Silver Nanoparticles ◽  
Biomedical Applications ◽  
Consumer Products ◽  
Ag Nps ◽  
New Techniques ◽  
Governing Factor ◽  
Wide Range ◽  
Microbial Proliferation ◽  
Synthetic Routes ◽  
Biomedical Fields

Silver nanoparticles (Ag-NPs) have diverted the attention of the scientific community and industrialist itself due to their wide range of applications in industry for the preparation of consumer products and highly accepted application in biomedical fields (especially their efficacy against microbes, anti-inflammatory effects, and wound healing ability). The governing factor for their potent efficacy against microbes is considered to be the various mechanisms enabling it to prevent microbial proliferation and their infections. Furthermore a number of new techniques have been developed to synthesize Ag-NPs with controlled size and geometry. In this review, various synthetic routes adapted for the preparation of the Ag-NPs, the mechanisms involved in its antimicrobial activity, its importance/application in commercial as well as biomedical fields, and possible application in future have been discussed in detail.

Silver nanoparticles induce cytotoxicity, but not cell transformation or genotoxicity on Balb3T3 mouse fibroblasts

2013 ◽  
Vol 14 (1-2) ◽  
pp. 49-60 ◽  
Author(s):  
Francesca Broggi ◽  
Jessica Ponti ◽  
Guido Giudetti ◽  
Fabio Franchini ◽  
Vicki Stone ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Cell Transformation ◽  
Micronucleus Test ◽  
Chemical Properties ◽  
Neoplastic Transformation ◽  
Research Centre ◽  
Ag Nps ◽  
Joint Research ◽  
Ic50 Values ◽  
Average Size

AbstractSilver nanoparticles (Ag NPs) are one of the most common nanomaterials present in nanotechnology-based products. Here, the physical chemical properties of Ag NPs suspensions of 44 nm, 84 nm and 100 nm sizes synthesized in our laboratory were characterized. The NM-300 material (average size of 17 nm), supplied by the Joint Research Centre Nanomaterials Repository was also included in the present study. The Ag NPs potential cytotoxicity was tested on the Balb3T3 cell line by the Colony Forming Efficiency assay, while their potential morphological neoplastic transformation and genotoxicity were tested by the Cell Transformation Assay and the micronucleus test, respectively. After 24 h of exposure, NM-300 showed cytotoxicity with an IC50 of 8 µM (corresponding to 0.88 µg/mL) while for the other nanomaterials tested, values of IC50 were higher than 10 µM (1.10 µg/mL). After 72 h of exposure, Ag NPs showed size-dependent cytotoxic effect with IC50 values of 1.5 µM (1.16 µg/mL) for NM-300, 1.7 µM (1.19 µg/mL) for Ag 44 nm, 1.9 µM (0.21 µg/mL) for Ag 84 nm and 3.2 µM (0.35 µg/mL) for Ag 100 nm. None of the Ag NPs tested was able to induce either morphological neoplastic transformation or micronuclei formation.

Sign in / Sign up

Export Citation Format

Share Document