scholarly journals Effect of Three Different Contamination Removal Methods on Bond Strength of a Self-etching Adhesive to Dentin Contaminated with an Aluminum Chloride Hemostatic Agent

2013 ◽  
Vol 14 (1) ◽  
pp. 26-33 ◽  
Author(s):  
Siavash Savadi Oskoee ◽  
Mahmoud Bahari ◽  
Amir Ahmad Ajami ◽  
Mehdi Abed Kahnamoii ◽  
Soodabeh Kimyai ◽  
...  
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Aluminum Chloride ◽  
Hemostatic Agent ◽  
Control Group ◽  
Group V ◽  
Group Iii ◽  
Group I ◽  
Self Etch ◽  
Contamination Removal

ABSTRACT Aim This study evaluated the effect of three different contamination removal methods on bond strength of one-step self-etching adhesive to dentin contaminated with an aluminum chloride hemostatic agent. Materials and methods One hundred noncarious adult molars were used in this study; 2-mm-thick dentin disks were prepared and randomly assigned to 5 groups (n = 20). Group I: control; group II: hemostatic agent-contaminated; group III: hemostatic agent-contaminated and rinsing with water; group IV: hemostatic agent-contaminated and ethylene diamine tetraacetic acid (EDTA) application; and group V: hemostatic agent-contaminated and phosphoric acid application. Clearfil S3 Bond was used to bond composite to dentin surfaces. Subsequent to adding composite cylinders the shear bond strength test was performed. Data were analyzed by one-way ANOVA and Tukey test. Two additional specimens from each group were prepared and evaluated under scanning electron microscope (SEM). Results There were statistically significant differences in bond strength among the groups (p < 0.001). In two-by-two comparisons statistically significant differences were observed in bond strength values between all the groups (p < 0.001) except for groups I and IV (p = 0.933). Conclusion Aluminum chloride hemostatic agent adversely affected the bond strength of self-etch adhesive to dentin. However, application of EDTA increased the bond strength to the level of normal dentin. Clinical significance EDTA and phosphoric acid removed aluminum chloride hemostatic agent contamination of dentin surfaces. However, unlike EDTA phosphoric acid failed to increase the bond strength of self-etch adhesive to dentin to the level of the control group. How to cite this article Ajami AA, Kahnamoii MA, Kimyai S, Oskoee SS, Pournaghi-Azar F, Bahari M, Firouzmandi M. Effect of Three Different Contamination Removal Methods on Bond Strength of a Self-etching Adhesive to Dentin Contaminated with an Aluminum Chloride Hemostatic Agent. J Contemp Dent Pract 2013;14(1):26-33.

scholarly journals Difference in Bonding Strength of RMGIC according to Type of Hemostatic Agent in Primary Tooth

2021 ◽  
Vol 48 (4) ◽  
pp. 460-466
Author(s):  
Seolah Back ◽  
Joonhaeng Lee ◽  
Jongbin Kim ◽  
Miran Han ◽  
Jong Soo Kim
Keyword(s):  
Bond Strength ◽  
Aluminum Chloride ◽  
Shear Bond Strength ◽  
Ferric Sulfate ◽  
Aluminium Chloride ◽  
Hemostatic Agent ◽  
Primary Tooth ◽  
Group Iii ◽  
Group I ◽  
Group Ii

The purpose of this study was to compare the effect of the hemostatic agent containing aluminum chloride with hemostatic agent containing ferric sulfate on the shear bond strength of resin-modified glass ionomer cement(RMGIC) to dentin in primary tooth. Twenty extracted non-carious human primary teeth were collected in this study. The specimens were cut to expose dentin and polished. The specimens were randomly seperated into 3 groups for treatment; group I: polyacrylic acid(PAA), RMGIC; group II: aluminum chloride, PAA, RMGIC; group III: ferric sulfate, PAA, RMGIC Ten specimens from each group were subjected to shear bond strength test. The mean shear bond strength of each group was as follows: 10.07 ± 1.83 MPa in Group I, 7.62 ± 0.78 MPA in group II, 5.23 ± 0.78 MPa in group III. There were significant differences among all groups(p < 0.001). In conclusion, both aluminum chloride hemostatic agent and ferric sulfate hemostatic agent decreased the shear bond strength of RMGIC to dentin. And ferric sulfate hemostatic agent decreased the shear bond strength of RMGIC more than the aluminium chloride hemostatic agent.

Effect of Different Pretreatment Methods on Dentin Bond Strength of a One-step Self-etch Adhesive

2009 ◽  
Vol 10 (1) ◽  
pp. 41-48 ◽  
Author(s):  
Emel Karaman ◽  
A. Rüya Yazici ◽  
Atila Ertan ◽  
Güi Özgünaltay ◽  
Berrin Dayangaç
Keyword(s):  
Bond Strength ◽  
Acid Group ◽  
Control Group ◽  
Air Abrasion ◽  
Group Iii ◽  
Group I ◽  
One Step ◽  
Laser Group ◽  
Group Ii ◽  
Self Etch

Abstract Aim The aim of this in vitro study was to evaluate the shear bond strength of a one-step self-etch adhesive to dentin pretreated with phosphoric acid, air abrasion, or laser. Methods and Materials Fifty-six extracted non-carious human mandibular molars were mounted and the occlusal surfaces ground with a mechanical grinder to obtain flat occlusal dentin surfaces. The teeth were randomly divided into four groups of 14 teeth according to the different dentin surface pretreatment methods: Group I- Acid, Group II- Laser, Group III- Air abrasion, Group IV (Control)- No surface treatment. After applying a one-step self-etch adhesive system, Futura Bond NR, cylinders of Z250 composite resin were bonded to the dentin surfaces by transparent gelatin capsules (2.5 mm diameter; 3 mm high) and then polymerized. All specimens were stored in distilled water at 37°C for 24 hours. Shear bond testing was carried out using an Universal testing machine with a crosshead speed of 0.5 mm/sec. Data were analyzed using the Kruskal Wallis and Mann-Whitney tests at a significance level of 0.05. Results The bond strength of air abrasion (Group III) and the control group (Group IV) were statistically higher than both the acid (Group I) and laser (Group II) pretreatments (p<0.05). No statistically significant differences were found in shear bond strength between surfaces treated with air abrasion and the control group (p>0.05). Surfaces pretreated with laser (Group II) resulted in the lowest bond strength which was not statistically different from those pretreated with acid (Group I) (p>0.05). Conclusion Surfaces pretreated with acid and laser adversely affected the bond strength of a one-step selfetch adhesive, Futura Bond NR, while pretreatment with air abrasion had no effect on bond strength. Clinical Significance The pretreatment of dentin surfaces prior to self-etch adhesive seems to be unnecessary and defeats the original purpose of these systems. Citation Yazici AR, Karaman E, Ertan A, Özgünaltay G, Dayangaç B. Effect of Different Pretreatment Methods on Dentin Bond Strength of a One-step Self-etch Adhesive. J Contemp Dent Pract 2009 January; (10)1:041-048.

scholarly journals Effect of Aluminum Chloride Hemostatic Agent on Bonding Strength of RMGIC in Primary Tooth

2021 ◽  
Vol 48 (4) ◽  
pp. 397-404
Author(s):  
Seung-Hee Woo ◽  
Jisun Shin ◽  
Joonhaeng Lee ◽  
Miran Han ◽  
Jong Soo Kim
Keyword(s):  
Bond Strength ◽  
Aluminum Chloride ◽  
Shear Bond Strength ◽  
Primary Teeth ◽  
Group Iv ◽  
Hemostatic Agent ◽  
Dentinal Tubules ◽  
Group Iii ◽  
Group I ◽  
Group Ii

The purpose of this study was to evaluate the effect of a hemostatic agent containing aluminum chloride on the shear bond strength of resin-modified glass ionomer cement (RMGIC) to the dentin of primary teeth. Thirty-six extracted non-carious human primary teeth were collected in this study. Dentin surfaces were cut and polished. The specimens were randomly divided into 4 groups; group I: RMGIC without conditioning; group II: polyacrylic acid (PAA), RMGIC; group III: aluminum chloride, RMGIC; group IV: aluminum chloride, PAA, RMGIC. All teeth were thermocycled between 5.0℃ and 55.0℃ for 5000 cycles. Fifteen specimens from each group were subjected to shear bond strength test and 3 specimens from each group were inspected using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy. The mean shear bond strength of each group was as follows: 4.04 ± 0.88 MPa in group I, 8.29 ± 1.40 MPa in group II, 1.39 ± 0.47 MPa in group III, 6.24 ± 2.76 MPa in group IV. There were significant differences among all groups (p < 0.001). SEM image of the dentinal tubules were partially exposed in group III and group IV. Fully exposed dentinal tubules were found in group II. In conclusion, aluminum chloride decreased the shear bond strength of RMGIC to dentin, regardless of PAA conditioning.

The Quantitative Ultrastructure of the Heart Muscle of Japanese Quail by Hypergravitation, Hypodynamy and Combination

1990 ◽  
Vol 48 (3) ◽  
pp. 188-189
Author(s):  
Anton Bózner ◽  
Mikuláš Gažo ◽  
Jozef Dostál
Keyword(s):  
Japanese Quail ◽  
Heart Muscle ◽  
Relative Size ◽  
Combination Group ◽  
Control Group ◽  
Group V ◽  
Group Iii ◽  
Space Flights ◽  
Group I ◽  
Quantitative Ultrastructure

It is anticipated that Japanese quail /Coturnix coturnix japonica/ will provide animal proteins in long term space flights. Consequently this species of birds is of research interest of international space program INTERCOSMOS. In the year 1987 we reported on an experiment /2/ in which the effect of chronic acceleration of 2 G hypergravitation, the hypodynamy and the simultaneous effect of chronic acceleration and the location in the centre of the turntable of the centrifuge on the protein fractions in skeletal muscles was studied. The ultrastructure of the heart muscle was now in this experiments examined as well.Japanese quail cockerels, aged 48 days were exposed to 2 G hypergravitation /group IV/ in a 6,4 m diameter centrifuge, to hypodynamy /group III/ and their combination /group V/, respectively for 6 days / Fig.1/. The hypodynamy in group III was achieved by suspending the birds in jackets without contact the floor. The group II was located in the centre ofthe turntable of the centrifuge. The control group I. was kept under normal conditions. The quantitative ultrastructure of myocard was evaluated by the methods of Weibel/3/ - this enables to determine the number, relative size and volume of mitochondria volume of single mitochondria, defficiency of mitochondrial cristae and volume of myofibrils.

Analysis of surface conditioning methods on core-veneer bond strength of CAD/CAM zirconia restorations

2020 ◽  
pp. 1-11
Author(s):  
Anip K. Roy ◽  
Govind N. Prasad ◽  
Tushar V. Bhagat ◽  
Saurabh Chaturvedi ◽  
Vishwanath Gurumurthy ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Group Iv ◽  
Control Group ◽  
Group Iii ◽  
Surface Conditioning ◽  
Group I ◽  
Alumina Particles ◽  
Scanning Electron

BACKGROUND: The increased strength of zirconia has resulted in its widespread application in clinical dentistry. Nevertheless, the fracture of veneering porcelains remains one of the key reasons of failure. OBJECTIVE: The objective of this study was to compare and analyze the influence of surface conditioning methods on the core-veneer bond strength of zirconia restorations. METHODS: Thirty specimens of zirconia core with sizes 10 × 5 × 5 mm were layered with porcelain of sizes 5 × 3 × 3 mm. On the basis of different surface conditioning methods, four groups were made: Group I: abrasion with airborne alumina particles of 110 μm size, Group II: sandblasting with silica coated alumina particles of 50 μm in size, Group III (modified group): alteration with a coating of zirconia powder prior to sintering, and Group IV (control group): metal core specimens. The shear force of all specimens was tested using a universal testing machine with a 0.5 mm/min crosshead speed. One-way analysis of variance (ANOVA) and Tukey’s post hoc pair wise comparison (p= 0.05) were performed to analyze the shear bond strength. A scanning electron microscope was used to assess the fractured specimens. RESULTS: A statistically significant difference was noted between the groups. The mean value of shear bond strength was 40.25 MPa for Group I, 41.93 MPa for Group II, 48.08 MPa for Group III and 47.01 MPa for Group IV. CONCLUSIONS: The modified zirconia group and control group demonstrated a significantly higher mean bond strength than that of Group I, where airborne particle abrasion was used. The scanning electron microscope showed that cohesive fracture in the porcelain veneers was the main problem of failure in altered zirconia. The modified zirconia specimens in Group III demonstrated significantly improved values of shear bond strength.

A Study on the Effect of Samoa Extract (Cleome droserifolia) on Sperm Quality in Male Albino Rats Exposed to Pyrethroid

2021 ◽  
pp. 39-45
Author(s):  
Nura I. Al-Zail ◽  
Salah F. Kamies
Keyword(s):  
Sperm Quality ◽  
Group Iv ◽  
Male Rats ◽  
Control Group ◽  
Albino Rats ◽  
Protective Agent ◽  
Group V ◽  
Group Iii ◽  
Group I ◽  
Induced Changes

Pyrethroid cyhalothrin (PC) is an insecticide that is used worldwide for pest control in agriculture and household use. Samoa extract (SE) is a potent antioxidant protecting cells from oxidative stress. The present study investigates the protective and therapeutic effect of SE on PC-induced changes in sperm quality in male rats. Fifty adult male albino rats were divided into five groups: group I: served as control; group II: received PC i.p. only (6.2 mg/kg b.wt.); group III: received SE only (100 mg/kg b.wt., p.o.) for eight weeks; group IV: received SE as a protective agent daily for eight weeks, then followed by the administration of PC (i.p.) three times a week for two weeks; group V: exposed to PC (i.p.) three times a week for two weeks, then treated with the SE daily for 8 weeks. Results showed that PC caused markedly impaired sperm quality (a count, viability, motility, and abnormality). Compared to PC-treated animals, SE in the protective group markedly restored the alteration of sperm indices. However, SE in the curative group was found to be less effective in restoring PC-induced alterations. In conclusion, the data of this study revealed that the SE as a protective agent is more effective than as a therapeutic agent. Keywords: Samoa; Pyrethroid; Sperm quality; Rat

scholarly journals Comparative Evaluation of Apical Sealing Ability of Different Obturation Techniques by Confocal Microscopy: An In Vitro Study

2020 ◽  
Vol 8 (02) ◽  
pp. 55-59
Author(s):  
Reetu Arora ◽  
Yogesh Kumar ◽  
Neetu Jindal ◽  
Renu Aggarwal ◽  
Kavneet Takhar
Keyword(s):  
Root Canal ◽  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Group Iv ◽  
Control Group ◽  
Group Vi ◽  
Group V ◽  
Group Iii ◽  
Group I

Abstract Introduction The aim of obturation in the root canal is to completely seal the canal space to eliminate all the portals of entry and exit between root canal and periodontal space. Various techniques have been developed to achieve a hermetic seal. Materials and Methods As many as 150 extracted human maxillary central incisors were taken for the study. Biomechanical preparation was done up to F5 protaper file. According to different obturation techniques, samples were divided into six groups, keeping 30 samples in experimental and 15 samples in control groups. Group I–Lateral Condensation, Group II–Thermafil, Group III–Beefill, Group IV–GuttaFlow, Group V–Positive Control group, Group VI–Negative Control group. After obturation, the samples were immersed in 2% Rhodamine-B dye for 24 hours. Each sample was longitudinally sectioned to examine under confocal laser scanning microscope. Statistical Analysis The results were evaluated with ANOVA and posthoc Tukey honest significant difference (HSD) comparison test. Results The mean values of dye penetration of different groups were Group I (Lateral Condensation) 1.51 ± 0.451, Group II (Thermafil) 0.918 ± 0.399, Group III (Beefill) 1.30 ± 0.559. Group IV (GuttaFlow) 0.655 ± 0.396, Group V (Positive Control group) 1.96 ±0.046, Group VI (Negative Control group) 0 ± 0. The lowest mean value of apical microleakage was found in GuttaFlow amongst all experimental groups. Conclusion It can be concluded that the GuttaFlow obturating material exhibited better apical sealing ability with canal walls.

scholarly journals Comparative Evaluation between Sulfasalazine Alone and in Combination with Herbal Medicine on DSS-Induced Ulcerative Colitis Mice

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Mi-Rae Shin ◽  
Kyeong Jo Kim ◽  
Soo Hyun Kim ◽  
Su Ji Kim ◽  
Bu-Il Seo ◽  
...  
Keyword(s):  
Herbal Medicine ◽  
Comparative Evaluation ◽  
Control Group ◽  
Inflammatory Infiltration ◽  
Group V ◽  
Group Iii ◽  
Protein Levels ◽  
Group I ◽  
Apoptotic Protein ◽  
Mitogen Activated Protein

The present study aimed to investigate the comparative evaluation of pharmacological efficacy between sulfasalazine alone and sulfasalazine in combination with herbal medicine on dextran sodium sulfate- (DSS-) induced UC in mice. Balb/c mice received 5% DSS in drinking water for 7 days to induce colitis. Animals were divided into five groups (n=9): Group I (normal group), Group II (DSS control group), Group III (DSS + sulfasalazine (30 mg/kg)), Group IV (DSS + sulfasalazine (60 mg/kg)), and Group V (DSS + sulfasalazine (30 mg/kg) + Cinnamomi Cortex and Bupleuri Radix mixture (30 mg/kg) (SCB)). Colonic pathological changes were analyzed using hematoxyline/eosin staining. The antioxidant, inflammatory, and apoptotic protein levels were determined using western blotting. SCB supplementation, as well as sulfasalazine, suppressed colonic length and mucosal inflammatory infiltration. In addition, SCB treatment significantly reduced the expression of proinflammatory signaling molecules through suppression of both mitogen-activated protein kinases (MAPK) and nuclear factor-kappa B (NF-κB) signaling pathways and prevented the apoptosis of the colon. Moreover, SCB administration significantly led to the upregulation of antioxidant enzymes including SOD and catalase. Taken together, SCB treatment might offer a better treatment for human UC than sulfasalazine alone or may be useful as an alternative therapeutic strategy against UC, without any evidence of side effects.

An in vitro Evaluation of Microtensile Bond Strength of Resin-based Sealer with Dentin Treated with Diode and Nd:YAG Laser

2013 ◽  
Vol 14 (2) ◽  
pp. 183-187 ◽  
Author(s):  
G Anil Kumar ◽  
Maneesha Das ◽  
Sindhu Ramesh ◽  
Surendranath Garapati
Keyword(s):  
Bond Strength ◽  
Nd:Yag Laser ◽  
Root Canal ◽  
Smear Layer ◽  
Control Group ◽  
Microtensile Bond Strength ◽  
Group Iii ◽  
Group I ◽  
Ah Plus

ABSTRACT Background Smear layer is a negative factor which prevents adhesion of the filling material to the dentinal walls. Recent advances in dental research have incorporated lasers as a potential adjunct in root canal treatment by removing the smear layer before filling the root canal system, enhancing the adhesion of sealers to dentin and improving the sealing ability. Aim To evaluate the microtensile bond strength of AH-Plus resin-based sealer to dentin after treatment with 980 nm diode and 1,064 nm neodymium-doped:yttrium aluminum garnet (Nd:YAG) laser in vitro. Materials and methods Thirty specimens prepared for three groups namely group I (control), group II (980 nm diode–lased specimens) and group III (Nd:YAG–lased specimens). One tooth from each group was observed under scanning electron microscope for evaluation of intracanal root dentin morphology. Remaining specimens were used for making microsections by hard tissue microtome. Specimens for groups II and III were lased with 980 nm diode and 1,064 nm Nd:YAG laser. AH Plus sealer was applied onto specimens and mounted onto Instron universal testing machine for microtensile bond strength testing. Results were subjected to statistical analysis using one-way analysis of variance (ANOVA) and Tukey's test. Results Group III Nd:YAG had maximum mean microtensile bond strength values (11.558 ± 0.869), followed by group II diode (9.073 ± 0.468) and group I control (6.05 ± 0.036). Statistically significant differences were seen among all the groups. SEM analysis shows removal of smear layer in both groups II and III. Conclusion Both Nd:YAG and diode laser were more effective than control group in improving the microtensile bond strength of AH Plus sealer to dentin. Clinical significance Lasers have the potential to increase the adhesiveness of root canal sealer to dentin surface, thereby improving the quality of root canal obturation. How to cite this article Maneesha D, Anil KG, Sindhu R, Surendranath G, Deepak S. An in vitro Evaluation of Microtensile Bond Strength of Resin-based Sealer with Dentin Treated with Diode and Nd:YAG Laser. J Contemp Dent Pract 2013;14(2): 183-187.

The Effect of Parathion-methyl and Antidotes on Parotid and Pancreatic Glands: A Pilot Experimental Study

2007 ◽  
Vol 26 (5) ◽  
pp. 383-388 ◽  
Author(s):  
Betul Gulalp ◽  
Yuksel Gokel ◽  
Derya Gumurdulu ◽  
Gulsah Seydaoglu ◽  
Kenan Daglioglu ◽  
...  
Keyword(s):  
Group Iv ◽  
Control Group ◽  
Blood Levels ◽  
Parotid Glands ◽  
Group V ◽  
Group Iii ◽  
Group I ◽  
Male Wistar Rats ◽  
Histopathologic Evaluation ◽  
Histologic Changes

The objective of this study is to investigate the functions of parotid and pancreatic glands in response to intoxication with parathion-methyl (PM) and the effects of treatment in rats. Seventy-five male Wistar rats were divided equally into five groups: Group I, control; group II, received atropine and pralidoxime (2-PAM) for 24 h, but no PM; group III, oral PM but no atropine and 2-PAM; group IV, PM and atropine for 24 h and 2-PAM; group V, PM and atropine for 96 h and 2-PAM. After the administration of the chemicals, blood samples were drawn to test for amylase, lipase, acetylcholinesterase (AChE), and butyrylcholinesterase (BChE), while pancreatic and parotid glands of each rat were removed for light microscopic examination. Amylase levels were found significantly elevated in groups II, III, IV, and V, whereas lipase levels were supranormal in groups III, IV, and V. The blood levels of AChE were decreased in groups III and IV and BChE were decreased in II, III, IV, and V. No evidence of pancreatitis and parotitis was identified in the histopathologic evaluation in any group in 96 h; however, hyperchromasia, irregularity in nuclei, and binuclear cells were observed in all parotid glands in group V. Parotitis and pancreatitis were not evident; however, hyperamylasemia and hyperlipasemia were found, whereas various histologic changes in parotid glands were documented in the groups that were administered organophosphate and treatment.

Sign in / Sign up

Export Citation Format

Share Document