scholarly journals Prototipe Alat Simulasi Taman Pintar Dengan Pengontrol Bluetooth HC-05 Berbasis Mikrokontroller

2020 ◽  
Vol 7 (2) ◽  
pp. 177
Author(s):  
Muhammad Fahmi ◽  
Budi Santoso ◽  
Maisyaroh Maisyaroh ◽  
Agus Sunandar ◽  
Ilham Wahyudi
Keyword(s):  
Automatic System ◽  
Control Plant ◽  
Free Time ◽  
Simulation Tool ◽  
Servo Motor ◽  
Electronic Components ◽  
Turn On ◽  
Water Plants ◽  
At Home

Abstrak: Pengontrol Taman Pintar dibuat untuk memudahkan aktivitas bertanam sehari-hari, aktivitas ini biasanya dilakukan secara manual yang tentu saja membuat orang kadang malas atau mempunyai kesibukan untuk melakukan aktivitas menyiram tanaman, menyalakan lampu, membuka gerbang taman. Bagi orang-orang yang memiliki rutinitas kesibukan yang padat akan sangat susah untuk mengurus taman sendiri dirumah, sehingga dengan membuat alat simulasi taman pintar menggunakan pengontrol Bluetooth HC-05 berbasis mikrokontroler dapat mempermudah para pemilik taman dirumah yang tidak memiliki banyak waktu luang untuk dapat menyiram taman, menyalakan lampu taman, membuka gerbang taman hanya dengan mengontrol melalui Bluetooth di smartphone android miliknya. Alat yang dibuat ini memakai komponen elektronik yaitu, Atmega16, Bluetooth HC-05, Motor Servo, dan Relay. Komponen-komponen elektronik tersebut digunakan untuk mendukung sistem otomatis yang akan dibuat. Alat ini memiliki kelebihan dapat mengontrol penyiraman tanaman, membuka gerbang atau pintu taman, menyalakan lampu taman hanya dengan mengontrol melalui smartphone android tanpa harus memerlukan tenaga yang banyak.   Kata kunci: atmega16, bluetooth hc-05, motor servo, relay.   Abstract: Smart Park controllers are made to facilitate daily farming activities, this activity is usually done manually which of course makes people sometimes lazy or have a busy life doing activities to water plants, turn on lights, open garden gates. For people who have a busy routine, it will be very difficult to manage their own garden at home, so making a smart garden simulation tool using a microcontroller-based Bluetooth HC-05 controller can make it easier for garden owners at home who don't have much free time to be able to water the garden. , turn on the garden light, open the garden gate by simply controlling via Bluetooth on his android smartphone. This tool is made using electronic components, namely, Atmega16, Bluetooth HC-05, Servo Motor, and Relay. These electronic components are used to support the automatic system to be created. This tool has the advantage of being able to control plant watering, open garden gates or doors turn on garden lights by simply controlling via an Android smartphone without requiring a lot of energy.   Keywords: atmega16, bluetooth hc-05, motor servo, relay.

scholarly journals Ideal Distance of Commands on EASYVR for Smart House Control

2019 ◽  
Vol 1 (2) ◽  
pp. 29-36
Author(s):  
Achmad Iqbal ◽  
Risfendra Risfendra
Keyword(s):  
Power Supply ◽  
Automatic System ◽  
Smart Home ◽  
Home Automation ◽  
Central Controller ◽  
Control Electronics ◽  
Smart House ◽  
Sound Processor ◽  
At Home

In the recent years, technology make everything to do easier. Home automation is the system otomatization for smart home. This project aims to design an automatic system tool for smart home using arduino mega 2560 as a central controller, easyVR as sound processor, driver relay and power supply. After testing, the result of this project shows a design which able to control electronics at home using audio censor. The result shows that overall function is quite well and need about 2 seconds for activated load.

Suggestions to “Turn on” Bright Children at Home

G/C/T ◽  
1982 ◽  
Vol 5 (5) ◽  
pp. 22-22
Author(s):  
Sylvia Anthony
Keyword(s):  
Turn On ◽  
At Home

scholarly journals Berkebun di Rumah pada Masa Pandemi dengan Memanfaatkan Sampah Rumah Tangga

2021 ◽  
Vol 6 (3) ◽  
pp. 251-257
Author(s):  
Sartono Joko Santosa ◽  
Siswadi Siswadi ◽  
Andi Fajarwanto
Keyword(s):  
Crop Yields ◽  
Free Time ◽  
Household Waste ◽  
Community Food Security ◽  
Central Java ◽  
Work From Home ◽  
Productive Activities ◽  
Basic Need ◽  
Program Show ◽  
At Home

Food is a basic need for humans that must be fulfilled as a basic need; food has an essential meaning and role in a nation's life. The problems faced during the Covid 19 pandemic have forced everyone to keep quiet and work from home so that everyone tries to take advantage of this free time with productive activities. One of these activities is gardening at home using household waste. To make this happen, from April to September 2020, the community service team conducted counseling and training and practices for the Amuktiwo Ngubo farmer group, Kestalan sub-district, Banjasari District, Surakarta City, Central Java. The results of the program show that the Covid 19 pandemic forces every citizen, especially partner groups, to do activities at home, which results in a lot of free time available, so gardening at home by using household waste as a planting medium is the most appropriate solution because the environment is clean and healthy. The crop yields can meet the needs of the kitchen, which results in reduced expenses. Also, if this program is implemented nationally, the goal of community food security will be achieved.

scholarly journals PENGENDALI BEBAN LISTRIK MENGGUNAKAN HAND PHONE MELALUI MISSCALL

2012 ◽  
Vol 4 (2) ◽  
pp. 15-24
Author(s):  
Ahmad Bahri Joni Malyan ◽  
Surfa Yondri
Keyword(s):  
Control System ◽  
Control Systems ◽  
Electric Load ◽  
Turn On ◽  
Electrical Devices ◽  
Electric Loads ◽  
At Home

An Electric Load Controller is a tool to make easier an implementation of repeated activities such as to turn on and turn off the electric load by using a hand phone as a controller. The controller aims to take into account problems related to control systems and to design a control system that can be implemented in the house hold in case of turning on and off electric loads. A user may turn on and off electric loads from a remote place easily. The design of control, microcontroller, relay, load and rectifier are applied on this research. Furthermore, a hand phone is used for the missed call feature and IC AT89S52 is used on the microcontroller design through BASCOM 8051 programming so as to make missed call feature can be transmitted to a destination number without manually turning off and on electrical devices at home.

scholarly journals Temperature analysis of driver and optical behavior of LED lamps

2021 ◽  
Vol 40 (1) ◽  
Author(s):  
Emerson Roberto Santos ◽  
Maurício Vicente Tavares ◽  
Antonio Celso Duarte ◽  
Hélio Akira Furuya
Keyword(s):  
High Intensity ◽  
Electrical Current ◽  
Power Line ◽  
The Body ◽  
Circuit Board ◽  
Electronic Components ◽  
Low Intensity ◽  
Turn On ◽  
Flashing Light ◽  
Optical Behavior

This exploratory study was carried out with the objective to know the optical behavior of light-emitting diode (LED) lamps used and the temperature reached by electronic components that compose the driver (electronic circuit situated inside the body LED lamp) responsible to convert electrical alternating current from power line to direct current to operate the LED devices. Then, two different experiments were carried out with LED lamps. In the first experiment, 131 LED lamps used were chosen randomly and bought from household appliances store (bargain market product) presenting different nominal powers, 8, 10, 12 and 15 watts. All LED lamps were polarized at the power line at 127 V and revealed different optical behaviors, such as: not turn-on; flashing light (as strobe effect); flashing light (as strobe effect) with high intensity (more intense than normal); flashing light (as strobe effect) with low intensity (less intense than normal); fast turnon and turn-off only; and turn-on with low intensity of light (less intense than normal). The hypothesis for these behaviors can be attributed by three different behaviors: in lamps not turn-on, this failure can be attributed for dark spots that are created on the surface of LED device. In these lamps, all LED devices are electrically connected in serial. When a LED is inoperative, the electrical current is interrupted for all LED devices; damage to the electronic components caused by internal high temperature confined inside the lamp body during the operation causing electrical oscillations, as observed from different behaviors from flashing light, flashing light with high intensity, flashing light with low intensity and fast turn-on and turn-off only; swelling of the electrolytic capacitors causing low energy storage and varying the electrical current flow, the electrical current for other electronic components altered the normal optical behavior of the LED lamps. In the second experiment, the temperatures of electronic components located in driver were obtained out of body lamp revealing: from 33 (lowest temperature attributed to inductor) to 52.5ºC (highest temperature attributed to electrolytic capacitor). These temperature values represent the ideal or normal condition of operation for electronic components, but, when they are operating inside the lamp body, the found temperature values increased considerably. This characteristic can be better evidenced by strong color change (caused by accumulative temperature during the elapsed days used) on the printed circuit board used in the driver.

scholarly journals RFID-Based Digital Door Locking System

2021 ◽  
pp. 17-21
Author(s):  
Shubham Soni ◽  
◽  
Rajni Soni ◽  
Akhilesh A. Waoo ◽  
◽  
...  
Keyword(s):  
Servo Motor ◽  
Led Light ◽  
Know How ◽  
Turn On ◽  
Red Led ◽  
Green Led ◽  
Lcd Display ◽  
Door Lock

This is an IoT-enabled RFID-based door locking gadget. This door lock system will know how long the door is open and in this door lock system, only those people who register will be able to enter using their card. It uses a servo motor that operates with the help of Arduino. The Arduino board runs with complete programming that is stored inside it. By using this gadget, an owner can track his office and the place where he wants to let the specific people in. It is also very secure. RFID Module, LCD Display Red and Green and Yellow LED Light and Buzzer have also been used in this door lock system. When the door is locked, the yellow LED will be on and when the door lock is open, the green led light will turn on. The Red LED work will alert you that your card is wrong.

scholarly journals Design and simulation of bionic glove for rehabilitation of the paralytics

2018 ◽  
Vol 7 (2.8) ◽  
pp. 1
Author(s):  
Aparna B ◽  
Anithakrithi B ◽  
Naveena P ◽  
Yaswanth Kumar M ◽  
Avinash M ◽  
...  
Keyword(s):  
Recovery Rate ◽  
Low Cost ◽  
Hand Movement ◽  
Practical Implementation ◽  
Servo Motor ◽  
Robotic Technology ◽  
Input System ◽  
At Home

Repetitive therapy can improve dexterity and hand movement among the paralyzed and stroke affected patients. The assistance of simple robotic technology may enhance the recovery rate of such patients. The study aims at developing a low cost bionic glove rehabilitation device which aids in providing effective finger exercises for physiotherapy by the use of a potentiometer. The prototype is designed in the form of a wearable glove for easy use. It includes an ATMEGA-328 microcontroller that is programmed using Arduino software for controlling the device. The motion of the fingers during therapy is achieved using a metal gear servo motor while the linear potentiometer controls the angle. This device can be used in rehabilitation to provide repetitive therapy for fingers at home with limited supervision by the physiotherapist for the paralytics. The performance of the device is simulated and evaluated using the Proteus Intelligent Schematic Input System (ISIS) software. The results obtained from the simulation can be used to improve the features of the device for effective practical implementation.

scholarly journals Prototype Smart Home Menggunakan Modul Wifi ESP8266 Dengan Aplikasi Telegram

2020 ◽  
Vol 5 (2) ◽  
pp. 258
Author(s):  
Nisa Gracella Aslamia Oktari ◽  
Ali Nurdin ◽  
Abdul Rakhman
Keyword(s):  
Smart Home ◽  
Turn On ◽  
Temperature And Humidity ◽  
Sensor Control ◽  
Home Appliance ◽  
At Home

Smart Home is a technology that can make it easier for users to manage comfort and safety at home so they can control the equipment used, homeowners can open the gate automatically and check the temperature and humidity of the existing room at home. Sometimes homeowners forget to turn off or turn on the equipment used, and forget to close the gate again when no one is at home. From the above problems made a tool that can be used as a remote home appliance controller or can also be called smart home. This tool uses the ESP8266 wifi module as the main device and sensor control that is connected to the Telegram Application to give commands to the ESP8266 wifi module so that it can control the equipment used and is at home.

scholarly journals PERANCANGAN DAN PEMBUATAN SISTEM KENDALI KIPAS ANGIN OTOMATIS BERBASIS MIKROKONTROLER ATMEGA 32

2019 ◽  
Vol 7 (2) ◽  
pp. 1
Author(s):  
Anggi Anugrah ◽  
Putra Jaya
Keyword(s):  
Control System ◽  
Circulation Flow ◽  
Servo Motor ◽  
Final Project ◽  
Turn On ◽  
Ac Motor ◽  
Output Component ◽  
Design And Manufacture ◽  
And Control ◽  
Air Circulation

The design and manufacture of this tool aims to create a fan control system that can detect human presence, and regulate fan air circulation automatically towards the user. The method applied is atmega32 microcontroller which processes input in the form of a PIR sensor. The output component uses a relay to turn on the AC motor, the servo motor to direct the air circulation flow and the 16x2 LCD as a monitor of the fan process. The results of this final project aim to make it easier for humans to operate and control the direction of circulation of fan air flow automatically. Save electricity usage in economic terms because fans only operate when there are users.Keywords: Sensor PIR, Microcontroller, Motor Servo, LCD 16x2.

scholarly journals Gerbang Tertutup dan Terbuka pada Handphone Android Menggunakan Bluetooth

Petir ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 122-130
Author(s):  
Sri Mulyati ◽  
Sumardi Sadi
Keyword(s):  
Experimental Methods ◽  
Control Device ◽  
Simulation Tool ◽  
Servo Motor ◽  
Prototype Tool ◽  
Gate Opening ◽  
Communication Devices ◽  
Opening And Closing ◽  
Time And Energy ◽  
Work Up

The problem with opening the gate opening now is to work manually, which is opening and closing as well secure with a key, then pull or push the gate. This is certainly less efficient and less effective because it requires time and energy to do it. One solution is to make a control device it works automatically ie using a microcontroller, Bluetooth, and servo motor, with communication devices Android-based handphone. Laboratory experimental methods have been carried out to make 'open and close tools the gate with a cellphone'. Based on the results of the trial using Bluetooth and mobile phones, this tool can work up to a distance of 11.5 meters with a response time of 1 second. This prototype tool is very cheap, practical, efficient and effective in opening and closing gates. Not all Bluetooth can open and close gates because the password is required for the accent. This prototype is a simulation tool that works well.  

Sign in / Sign up

Export Citation Format

Share Document