scholarly journals OXIDATIVE AMMONOLYSIS OF 4-METHYLPYRIDINE ON OXIDE VANADIUM-TITANIUM-ZIRCONIUM CATALYST MODIFIED BY TIN AND TUNGSTEN OXIDES

2021 ◽  
Vol 73 (1) ◽  
pp. 196-203
Author(s):  
T. P MIKHAILOVSKAYA ◽  
◽  
R. KURMAKYZY ◽  
D.K. TOLEMISOVA ◽  
K. A. KADIRBEKOV ◽  
...  
Keyword(s):  
Structural Changes ◽  
High Selectivity ◽  
Catalytic Properties ◽  
Main Process ◽  
Contact Conditions ◽  
Oxidative Ammonolysis ◽  
Tungsten Oxides ◽  
Tio2 Anatase ◽  
Oxide Vanadium

Catalysts based on vanadium pentoxide modified by Ti, Sn, Zr and W oxides were tested in the oxidative ammonolysis of 4-methylpyridine. The role of the main process parameters such as temperature, the ratio of the initial components in the conversion of the methyl group to the nitrile one, and the optimal conditions for the oxidative ammonolysis of 4-methylpyridine were determined. It is determined that the V-Ti-Zr-O-catalyst and the sample containing 9% of tungsten oxide are superior in catalytic activity to the V-Ti-Zr-Sn-O contact. Conditions that ensure a high selectivity for the formation of 4-cyanopyridine were found. The highest yield of the target product (85-86%) was obtained on V-Ti-Zr-W-O at 270 °C, and the yield of 4-cyanopyridine was 87.5% at 310° C on the V-Ti-Zr-Sn-O catalyst. The phase composition and structural changes occurring in modified vanadium oxide catalysts have been studied. It is determined that mixed V-Ti-Zr-Sn-O and V-Ti-Zr-W-O catalysts contain ZrV2O7, the monoclinic modification of ZrO2 (baddeleyite), TiO2 (anatase), SnO2, WO3, and V2O5. In catalysts, it can exist in small amounts as a separate VO2 phase. The V-Ti-Zr-W-O catalyst showed the best catalytic properties. It has highactivity and selectivity towards 4-cyanopyridine.

scholarly journals Niobium on BEA Dealuminated Zeolite for High Selectivity Dehydration Reactions of Ethanol and Xylose into Diethyl Ether and Furfural

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1269
Author(s):  
Deborah S. Valadares ◽  
Maria Clara H. Clemente ◽  
Elon F. de Freitas ◽  
Gesley Alex V. Martins ◽  
José A. Dias ◽  
...  
Keyword(s):  
Solid State ◽  
Diethyl Ether ◽  
High Selectivity ◽  
Catalytic Properties ◽  
Good Activity ◽  
Green Solvent ◽  
Turnover Number ◽  
Dehydration Reactions ◽  
Leveling Effect

In this work, we investigated the role of solid-state dealumination by (NH4)2SiF6 (25% Al removal and 13% Si insertion), the impregnation of niobium (10, 18, and 25 wt. %) on dealuminated *BEA (DB) zeolite and their catalytic properties in ethanol and xylose transformations. Among all the studied catalysts, 18%Nb-DB showed increased mesoporosity and external areas. A leveling effect in the number and strength of the proposed two sites (Brønsted and Lewis) present in the catalyst (n1 = 0.24 mmol g−1, −ΔH1 = 49 kJ mol−1, and n2 = 0.20 mmol g−1, –ΔH2 = 42 kJ mol−1) in the catalyst 18%Nb-DB, might be responsible for its good activity. This catalyst presented the highest selectivity for diethyl ether, DEE (97%) with 61% conversion after 50 ethanol pulses at 230 °C (turnover number, TON DEE = 1.15). These features allowed catalytically fruitful bonding of the ethanol molecules to the neighboring sites on the channels, facilitating bimolecular ether formation through a possible SN2 mechanism. The same catalyst was active and selective for transformation of xylose at 180 °C, showing 64% conversion and 51% selectivity for furfural (TON Furfural = 24.7) using water as a green solvent.

Promotional effect of iron oxide on the catalytic properties of Fe–MnOx/TiO2 (anatase) catalysts for the SCR reaction at low temperatures

2016 ◽  
Vol 6 (6) ◽  
pp. 1772-1778 ◽  
Author(s):  
Shengcai Deng ◽  
Ke Zhuang ◽  
Bolian Xu ◽  
Yuanhua Ding ◽  
Lei Yu ◽  
...  
Keyword(s):  
Nitric Oxide ◽  
Iron Oxide ◽  
Selective Catalytic Reduction ◽  
Low Temperatures ◽  
Catalytic Properties ◽  
Catalytic Reduction ◽  
Surface Interaction ◽  
Tio2 Anatase ◽  
Promotional Effect

The surface interaction of the iron-improved MnOx/TiO2 (anatase) catalyst for the selective catalytic reduction of nitric oxide was studied. The role of iron was investigated through detailed experiments.

Microstructure and reactivity of small metal particles: The role of Ce additives

1992 ◽  
Vol 50 (1) ◽  
pp. 318-319
Author(s):  
L.D. Schmidt ◽  
K. R. Krause ◽  
J. M. Schwartz ◽  
X. Chu
Keyword(s):  
Atmospheric Pressure ◽  
Noble Metals ◽  
Mixed Oxides ◽  
Catalytic Properties ◽  
Chemical Shifts ◽  
Catalytic Converter ◽  
Structural Evolution ◽  
Single Particles ◽  
Small Metal Particles

The evolution of microstructures of 10- to 100-Å diameter particles of Rh and Pt on SiO2 and Al2O3 following treatment in reducing, oxidizing, and reacting conditions have been characterized by TEM. We are able to transfer particles repeatedly between microscope and a reactor furnace so that the structural evolution of single particles can be examined following treatments in gases at atmospheric pressure. We are especially interested in the role of Ce additives on noble metals such as Pt and Rh. These systems are crucial in the automotive catalytic converter, and rare earths can significantly modify catalytic properties in many reactions. In particular, we are concerned with the oxidation state of Ce and its role in formation of mixed oxides with metals or with the support. For this we employ EELS in TEM, a technique uniquely suited to detect chemical shifts with ∼30Å resolution.

Economic Growth: New Problems and New Risks

2006 ◽  
pp. 20-37 ◽  
Author(s):  
M. Ershov
Keyword(s):  
Economic Growth ◽  
Foreign Exchange ◽  
Driving Force ◽  
Structural Changes ◽  
Rate Of Growth

The economic growth, which is underway in Russia, raises new questions to be addressed. How to improve the quality of growth, increasing the role of new competitive sectors and transforming them into the driving force of growth? How can progressive structural changes be implemented without hampering the rate of growth in general? What are the main external and internal risks, which may undermine positive trends of development? The author looks upon financial, monetary and foreign exchange aspects of the problem and comes up with some suggestions on how to make growth more competitive and sustainable.

Effects of Myo-inositol Alone and in Combination with Seleno-Lmethionine on Cadmium-Induced Testicular Damage in Mice

2019 ◽  
Vol 12 (4) ◽  
pp. 311-323 ◽  
Author(s):  
Salvatore Benvenga ◽  
Antonio Micali ◽  
Giovanni Pallio ◽  
Roberto Vita ◽  
Consuelo Malta ◽  
...  
Keyword(s):  
Structural Changes ◽  
Natural Antioxidants ◽  
Minor Role ◽  
Positive Role ◽  
Testosterone Levels ◽  
Tnf Α ◽  
Testicular Lesions ◽  
A Minor ◽  
Immunohistochemical Analyses

Background: Cadmium (Cd) impairs gametogenesis and damages the blood-testis barrier. Objective: As the primary mechanism of Cd-induced damage is oxidative stress, the effects of two natural antioxidants, myo-inositol (MI) and seleno-L-methionine (Se), were evaluated in mice testes. Methods: Eighty-four male C57 BL/6J mice were divided into twelve groups: 0.9% NaCl (vehicle; 1 ml/kg/day i.p.); Se (0.2 mg/kg/day per os); Se (0.4 mg/kg/day per os); MI (360 mg/kg/day per os); MI plus Se (0.2 mg/kg/day); MI plus Se (0.4 mg/kg/day); CdCl2 (2 mg/kg/day i.p.) plus vehicle; CdCl2 plus MI; CdCl2 plus Se (0.2 mg/kg/day); CdCl2 plus Se (0.4 mg/kg/day); CdCl2 plus MI plus Se (0.2 mg/kg/day); and CdCl2 plus MI plus Se (0.4 mg/kg/day). After 14 days, testes were processed for biochemical, structural and immunohistochemical analyses. Results: CdCl2 increased iNOS and TNF-α expression and Malondialdehyde (MDA) levels, lowered glutathione (GSH) and testosterone, induced testicular lesions, and almost eliminated claudin-11 immunoreactivity. Se administration at 0.2 or 0.4 mg/kg significantly reduced iNOS and TNF-α expression, maintained GSH, MDA and testosterone levels, structural changes and low claudin-11 immunoreactivity. MI alone or associated with Se at 0.2 or 0.4 mg/kg significantly reduced iNOS and TNF-α expression and MDA levels, increased GSH and testosterone levels, ameliorated structural organization and increased claudin-11 patches number. Conclusion: We demonstrated a protective effect of MI, a minor role of Se and an evident positive role of the association between MI and Se on Cd-induced damages of the testis. MI alone or associated with Se might protect testes in subjects exposed to toxicants, at least to those with behavior similar to Cd.

scholarly journals Influence of the Reduction Temperature and the Nature of the Support on the Performance of Zirconia and Alumina-Supported Pt Catalysts for n-Dodecane Hydroisomerization

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 88
Author(s):  
Diana García-Pérez ◽  
Maria Consuelo Alvarez-Galvan ◽  
Jose M. Campos-Martin ◽  
Jose L. G. Fierro
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Catalytic Properties ◽  
Catalytic Performance ◽  
Major Influence ◽  
Pt Catalysts ◽  
Reduction Temperature ◽  
Metal Dispersion ◽  
Tungsten Oxides ◽  
Supported Pt Catalysts

Catalysts based on zirconia- and alumina-supported tungsten oxides (15 wt % W) with a small loading of platinum (0.3 wt % Pt) were selected to study the influence of the reduction temperature and the nature of the support on the hydroisomerization of n-dodecane. The reduction temperature has a major influence on metal dispersion, which impacts the catalytic activity. In addition, alumina and zirconia supports show different catalytic properties (mainly acid site strength and surface area), which play an important role in the conversion. The NH3-TPD profiles indicate that the acidity in alumina-based catalysts is clearly higher than that in their zirconia counterparts; this acidity can be attributed to a stronger interaction of the WOx species with alumina. The PtW/Al catalyst was found to exhibit the best catalytic performance for the hydroisomerization of n-dodecane based on its higher acidity, which was ascribed to its larger surface area relative to that of its zirconia counterparts. The selectivity for different hydrocarbons (C7–10, C11 and i-C12) was very similar for all the catalysts studied, with branched C12 hydrocarbons being the main products obtained (~80%). The temperature of 350 °C was clearly the best reduction temperature for all the catalysts studied in a trickled-bed-mode reactor.

scholarly journals Exploring Mucin as Adjunct to Phage Therapy

2021 ◽  
Vol 9 (3) ◽  
pp. 509
Author(s):  
Amanda Carroll-Portillo ◽  
Henry C. Lin
Keyword(s):  
Pathogenic Bacteria ◽  
Structural Changes ◽  
Phage Therapy ◽  
Bacterial Species ◽  
Gi Tract ◽  
Beneficial Bacteria ◽  
Phage Cocktail ◽  
Small Intestinal ◽  
Gastrointestinal Dysbiosis

Conventional phage therapy using bacteriophages (phages) for specific targeting of pathogenic bacteria is not always useful as a therapeutic for gastrointestinal (GI) dysfunction. Complex dysbiotic GI disorders such as small intestinal bowel overgrowth (SIBO), ulcerative colitis (UC), or Crohn’s disease (CD) are even more difficult to treat as these conditions have shifts in multiple populations of bacteria within the microbiome. Such community-level structural changes in the gut microbiota may require an alternative to conventional phage therapy such as fecal virome transfer or a phage cocktail capable of targeting multiple bacterial species. Additionally, manipulation of the GI microenvironment may enhance beneficial bacteria–phage interactions during treatment. Mucin, produced along the entire length of the GI tract to protect the underlying mucosa, is a prominent contributor to the GI microenvironment and may facilitate bacteria–phage interactions in multiple ways, potentially serving as an adjunct during phage therapy. In this review, we will describe what is known about the role of mucin within the GI tract and how its facilitation of bacteria–phage interactions should be considered in any effort directed at optimizing effectiveness of a phage therapy for gastrointestinal dysbiosis.

scholarly journals Structural and Technological Approach to Reveal the Role of the Lipid Phase in the Formation of Soy Emulsion Gels with Chia Oil

Gels ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 48
Author(s):  
Ana M. Herrero ◽  
Claudia Ruiz-Capillas
Keyword(s):  
Raman Spectroscopy ◽  
Structural Properties ◽  
Structural Changes ◽  
Protein Secondary Structure ◽  
Lipid Phase ◽  
Α Helix ◽  
Β Sheet ◽  
Shed Light ◽  
Chia Oil

Considerable attention has been paid to emulsion gels (EGs) in recent years due to their interesting applications in food. The aim of this work is to shed light on the role played by chia oil in the technological and structural properties of EGs made from soy protein isolates (SPI) and alginate. Two systems were studied: oil-free SPI gels (SPI/G) and the corresponding SPI EGs (SPI/EG) that contain chia oil. The proximate composition, technological properties (syneresis, pH, color and texture) and structural properties using Raman spectroscopy were determined for SPI/G and SPI/EG. No noticeable (p > 0.05) syneresis was observed in either sample. The pH values were similar (p > 0.05) for SPI/G and SPI/EG, but their texture and color differed significantly depending on the presence of chia oil. SPI/EG featured significantly lower redness and more lightness and yellowness and exhibited greater puncture and gel strengths than SPI/G. Raman spectroscopy revealed significant changes in the protein secondary structure, i.e., higher (p < 0.05) α-helix and lower (p < 0.05) β-sheet, turn and unordered structures, after the incorporation of chia oil to form the corresponding SPI/EG. Apparently, there is a correlation between these structural changes and the textural modifications observed.

Sign in / Sign up

Export Citation Format

Share Document