scholarly journals Constraining regional greenhouse gas emissions using geostationary concentration measurements: a theoretical study

2014 ◽  
Vol 7 (10) ◽  
pp. 3285-3293 ◽  
Author(s):  
P. J. Rayner ◽  
S. R. Utembe ◽  
S. Crowell
Keyword(s):  
Theoretical Study ◽  
Regional Scale ◽  
Surface Fluxes ◽  
Trace Gas ◽  
Science And Policy ◽  
Maximum Resolution ◽  
Methane Fluxes ◽  
Gas Measurements ◽  
Urban Emissions ◽  
East West

Abstract. We investigate the ability of column-integrated trace gas measurements from a geostationary satellite to constrain surface fluxes at regional scale. The proposed GEOCARB instrument measures CO2, CO and CH4 at a maximum resolution of 3 km east–west × 2.7 km north–south. Precisions are 3 ppm for CO2, 10 ppb for CO and 18 ppb for CH4. Sampling frequency is flexible. Here we sample a region at the location of Shanghai every 2 daylight hours for 6 days in June. We test the observing system by calculating the posterior uncertainty covariance of fluxes. We are able to constrain urban emissions at 3 km resolution including an isolated power plant. The CO measurement plays the strongest role; without it our effective resolution falls to 5 km. Methane fluxes are similarly well estimated at 5 km resolution. Estimating the errors for a full year suggests such an instrument would be a useful tool for both science and policy applications.

scholarly journals Constraining regional greenhouse gas emissions using geostationary concentration measurements: a theoretical study

2014 ◽  
Vol 7 (2) ◽  
pp. 1367-1392 ◽  
Author(s):  
P. J. Rayner ◽  
S. R. Utembe ◽  
S. Crowell
Keyword(s):  
Theoretical Study ◽  
Regional Scale ◽  
Surface Fluxes ◽  
Trace Gas ◽  
Science And Policy ◽  
Maximum Resolution ◽  
Methane Fluxes ◽  
Gas Measurements ◽  
Urban Emissions ◽  
East West

Abstract. We investigate the ability of column-integrated trace gas measurements from a geostationary satellite to constrain surface fluxes at regional scale. The proposed geoCARB instrument measures CO2, CO and CH4 at a maximum resolution of 3 km east–west × 2.7 km north–south. Precisions are 3 ppm for CO2, 10 ppb for CO and 18 ppb for CH4. Sampling frequency is flexible. Here we sample a region at the location of Shanghai every 2 daylight hours for 6 days in June. We test the observing system by calculating the posterior uncertainty covariance of fluxes. We are able to constrain urban emissions at 3 km resolution including an isolated power-plant. The CO measurement plays the strongest role; without it our effective resolution falls to 5 km. Methane fluxes are similarly well-estimated at 5 km resolution. Estimating the errors for a full year suggests such an instrument would be a useful tool for both science and policy applications.

Trace gas flux measurements at the landscape scale using boundary-layer budgets

1995 ◽  
Vol 351 (1696) ◽  
pp. 357-369 ◽  
Keyword(s):  
Boundary Layer ◽  
Local Area ◽  
Surface Fluxes ◽  
Trace Gas ◽  
Significant Heterogeneity ◽  
Methane Fluxes ◽  
Flux Measurements ◽  
The Mean ◽  
Nocturnal Inversion ◽  
One Year

Methane effluxes from wetland areas of Scotland were estimated by using the boundary-layer budget method by collecting air samples with an aircraft upwind and downwind of an area of extensive peatland. Nocturnal local area methane fluxes were also estimated at a peat bog site, Loch More, located at 58° 24' N 03° 36' W, using the concentration build up under the nocturnal inversion and from profiles of methane concentration using a tethered balloon. The mean daytime flux for the Loch More case studies in 1993 was found to be 128 ± 57 μ mol m -2 h -1 for the NE region of Scotland, comparable to but generally larger than those obtained for the same region one year earlier. The fluxes are smaller than those obtained in Caithness by the same technique. In 1993 the nocturnal fluxes were found to be 38 ± 7 μ mol m -2 h -1 , significantly smaller than those found during 1992. The daytime fluxes measured by the aircraft were generally larger than fluxes measured by micrometeorological techniques at the same time. These differences can be explained in terms of the significant heterogeneity in surface fluxes that exist on scales of a few hundred metres or less and the possibility of additional sources other than peatland in this region.

scholarly journals Soil gas probes for monitoring trace gas messengers of microbial activity

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Joseph R. Roscioli ◽  
Laura K. Meredith ◽  
Joanne H. Shorter ◽  
Juliana Gil-Loaiza ◽  
Till H. M. Volkmann
Keyword(s):  
Microbial Activity ◽  
Soil Heterogeneity ◽  
Soil Gas ◽  
Microbial Processes ◽  
Trace Gas ◽  
Soil Microbiome ◽  
Sampling System ◽  
Site Specific ◽  
Gas Measurements ◽  
Subsurface Monitoring

AbstractSoil microbes vigorously produce and consume gases that reflect active soil biogeochemical processes. Soil gas measurements are therefore a powerful tool to monitor microbial activity. Yet, the majority of soil gases lack non-disruptive subsurface measurement methods at spatiotemporal scales relevant to microbial processes and soil structure. To address this need, we developed a soil gas sampling system that uses novel diffusive soil probes and sample transfer approaches for high-resolution sampling from discrete subsurface regions. Probe sampling requires transferring soil gas samples to above-ground gas analyzers where concentrations and isotopologues are measured. Obtaining representative soil gas samples has historically required balancing disruption to soil gas composition with measurement frequency and analyzer volume demand. These considerations have limited attempts to quantify trace gas spatial concentration gradients and heterogeneity at scales relevant to the soil microbiome. Here, we describe our new flexible diffusive probe sampling system integrated with a modified, reduced volume trace gas analyzer and demonstrate its application for subsurface monitoring of biogeochemical cycling of nitrous oxide (N2O) and its site-specific isotopologues, methane, carbon dioxide, and nitric oxide in controlled soil columns. The sampling system observed reproducible responses of soil gas concentrations to manipulations of soil nutrients and redox state, providing a new window into the microbial response to these key environmental forcings. Using site-specific N2O isotopologues as indicators of microbial processes, we constrain the dynamics of in situ microbial activity. Unlocking trace gas messengers of microbial activity will complement -omics approaches, challenge subsurface models, and improve understanding of soil heterogeneity to disentangle interactive processes in the subsurface biome.

scholarly journals Precise multispecies agricultural gas flux determined using broadband open-path dual-comb spectroscopy

2021 ◽  
Vol 7 (14) ◽  
pp. eabe9765
Author(s):  
Daniel I. Herman ◽  
Chinthaka Weerasekara ◽  
Lindsay C. Hutcherson ◽  
Fabrizio R. Giorgetta ◽  
Kevin C. Cossel ◽  
...  
Keyword(s):  
Ecological Monitoring ◽  
Trace Gas ◽  
Gas Analyzer ◽  
Gas Flux ◽  
Time Resolved ◽  
Trace Gas Emissions ◽  
Open Path ◽  
Statistical Precision ◽  
Methane Fluxes ◽  
Flux Quantification

Advances in spectroscopy have the potential to improve our understanding of agricultural processes and associated trace gas emissions. We implement field-deployed, open-path dual-comb spectroscopy (DCS) for precise multispecies emissions estimation from livestock. With broad atmospheric dual-comb spectra, we interrogate upwind and downwind paths from pens containing approximately 300 head of cattle, providing time-resolved concentration enhancements and fluxes of CH4, NH3, CO2, and H2O. The methane fluxes determined from DCS data and fluxes obtained with a colocated closed-path cavity ring-down spectroscopy gas analyzer agree to within 6%. The NH3 concentration retrievals have sensitivity of 10 parts per billion and yield corresponding NH3 fluxes with a statistical precision of 8% and low systematic uncertainty. Open-path DCS offers accurate multispecies agricultural gas flux quantification without external calibration and is easily extended to larger agricultural systems where point-sampling-based approaches are insufficient, presenting opportunities for field-scale biogeochemical studies and ecological monitoring.

scholarly journals An evaluation of the performance of chemistry transport models by comparison with research aircraft observations. Part 1: Concepts and overall model performance

2003 ◽  
Vol 3 (5) ◽  
pp. 1609-1631 ◽  
Author(s):  
D. Brunner ◽  
J. Staehelin ◽  
H. L. Rogers ◽  
M. O. Köhler ◽  
J. A. Pyle ◽  
...  
Keyword(s):  
Quantitative Methods ◽  
Climate Models ◽  
Model Performance ◽  
Average Concentration ◽  
Convective Transport ◽  
Trace Gas ◽  
Atmospheric Conditions ◽  
Time Step ◽  
Research Aircraft ◽  
Gas Measurements

Abstract. A rigorous evaluation of five global Chemistry-Transport and two Chemistry-Climate Models operated by several different groups in Europe, was performed. Comparisons were made of the models with trace gas observations from a number of research aircraft measurement campaigns during the four-year period 1995-1998. Whenever possible the models were run over the same four-year period and at each simulation time step the instantaneous tracer fields were interpolated to all coinciding observation points. This approach allows for a very close comparison with observations and fully accounts for the specific meteorological conditions during the measurement flights. This is important considering the often limited availability and representativity of such trace gas measurements. A new extensive database including all major research and commercial aircraft measurements between 1995 and 1998, as well as ozone soundings, was established specifically to support this type of direct comparison. Quantitative methods were applied to judge model performance including the calculation of average concentration biases and the visualization of correlations and RMS errors in the form of so-called Taylor diagrams. We present the general concepts applied, the structure and content of the database, and an overall analysis of model skills over four distinct regions. These regions were selected to represent various atmospheric conditions and to cover large geographical domains such that sufficient observations are available for comparison. The comparison of model results with the observations revealed specific problems for each individual model. This study suggests the further improvements needed and serves as a benchmark for re-evaluations of such improvements. In general all models show deficiencies with respect to both mean concentrations and vertical gradients of important trace gases. These include ozone, CO and NOx at the tropopause. Too strong two-way mixing across the tropopause is suggested to be the main reason for differences between simulated and observed CO and ozone values. The generally poor correlations between simulated and measured NOx values suggest that in particular the NOx input by lightning and the convective transport from the polluted boundary layer are still not well described by current parameterizations, which may lead to significant differences in the spatial and seasonal distribution of NOx in the models. Simulated OH concentrations, on the other hand, were found to be in surprisingly good agreement with measured values.

scholarly journals The high Arctic in extreme winters: vortex, temperature, and MLS and ACE-FTS trace gas evolution

2008 ◽  
Vol 8 (3) ◽  
pp. 505-522 ◽  
Author(s):  
G. L. Manney ◽  
W. H. Daffer ◽  
K. B. Strawbridge ◽  
K. A. Walker ◽  
C. D. Boone ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Lower Stratosphere ◽  
High Arctic ◽  
Trace Gas ◽  
Satellite Measurements ◽  
Broadband Emission ◽  
Gas Measurements ◽  
Chemistry Experiment ◽  
Very High ◽  
Good Agreement

Abstract. The first three Arctic winters of the ACE mission represented two extremes of winter variability: Stratospheric sudden warmings (SSWs) in 2004 and 2006 were among the strongest, most prolonged on record; 2005 was a record cold winter. Canadian Arctic Atmospheric Chemistry Experiment (ACE) Validation Campaigns were conducted at Eureka (80° N, 86° W) during each of these winters. New satellite measurements from ACE-Fourier Transform Spectrometer (ACE-FTS), Sounding of the Atmosphere using Broadband Emission Radiometry (SABER), and Aura Microwave Limb Sounder (MLS), along with meteorological analyses and Eureka lidar temperatures, are used to detail the meteorology in these winters, to demonstrate its influence on transport, and to provide a context for interpretation of ACE-FTS and validation campaign observations. During the 2004 and 2006 SSWs, the vortex broke down throughout the stratosphere, reformed quickly in the upper stratosphere, and remained weak in the middle and lower stratosphere. The stratopause reformed at very high altitude, near 75 km. ACE measurements covered both vortex and extra-vortex conditions in each winter, except in late-February through mid-March 2004 and 2006, when the strong, pole-centered vortex that reformed after the SSWs resulted in ACE sampling only inside the vortex in the middle through upper stratosphere. The 2004 and 2006 Eureka campaigns were during the recovery from the SSWs, with the redeveloping vortex over Eureka. 2005 was the coldest winter on record in the lower stratosphere, but with an early final warming in mid-March. The vortex was over Eureka at the start of the 2005 campaign, but moved away as it broke up. Disparate temperature profile structure and vortex evolution resulted in much lower (higher) temperatures in the upper (lower) stratosphere in 2004 and 2006 than in 2005. Satellite temperatures agree well with lidar data up to 50–60 km, and ACE-FTS, MLS and SABER show good agreement in high-latitude temperatures throughout the winters. Consistent with a strong, cold upper stratospheric vortex and enhanced radiative cooling after the SSWs, MLS and ACE-FTS trace gas measurements show strongly enhanced descent in the upper stratospheric vortex in late January through March 2006 compared to that in 2005.

scholarly journals Inferring <sup>222</sup>Rn soil fluxes from ambient <sup>222</sup>Rn activity and eddy covariance measurements of CO<sub>2</sub>

2016 ◽  
Vol 9 (11) ◽  
pp. 5523-5533 ◽  
Author(s):  
Sander van der Laan ◽  
Swagath Manohar ◽  
Alex Vermeulen ◽  
Fred Bosveld ◽  
Harro Meijer ◽  
...  
Keyword(s):  
Eddy Covariance ◽  
Activity Concentration ◽  
Regional Scale ◽  
Surface Flux ◽  
Surface Fluxes ◽  
Spatial And Temporal Variability ◽  
Single Pair ◽  
The South ◽  
Practical Applications ◽  
Soil Flux

Abstract. We present a new methodology, which we call Single Pair of Observations Technique with Eddy Covariance (SPOT-EC), to estimate regional-scale surface fluxes of 222Rn from tower-based observations of 222Rn activity concentration, CO2 mole fractions and direct CO2 flux measurements from eddy covariance. For specific events, the regional (222Rn) surface flux is calculated from short-term changes in ambient (222Rn) activity concentration scaled by the ratio of the mean CO2 surface flux for the specific event to the change in its observed mole fraction. The resulting 222Rn surface emissions are integrated in time (between the moment of observation and the last prior background levels) and space (i.e. over the footprint of the observations). The measurement uncertainty obtained is about ±15 % for diurnal events and about ±10 % for longer-term (e.g. seasonal or annual) means. The method does not provide continuous observations, but reliable daily averages can be obtained. We applied our method to in situ observations from two sites in the Netherlands: Cabauw station (CBW) and Lutjewad station (LUT). For LUT, which is an intensive agricultural site, we estimated a mean 222Rn surface flux of (0.29 ± 0.02) atoms cm−2 s−1 with values  > 0.5 atoms cm−2 s−1 to the south and south-east. For CBW we estimated a mean 222Rn surface flux of (0.63 ± 0.04) atoms cm−2 s−1. The highest values were observed to the south-west, where the soil type is mainly river clay. For both stations good agreement was found between our results and those from measurements with soil chambers and two recently published 222Rn soil flux maps for Europe. At both sites, large spatial and temporal variability of 222Rn surface fluxes were observed which would be impractical to measure with a soil chamber. SPOT-EC, therefore, offers an important new tool for estimating regional-scale 222Rn surface fluxes. Practical applications furthermore include calibration of process-based 222Rn soil flux models, validation of atmospheric transport models and performing regional-scale inversions, e.g. of greenhouse gases via the SPOT 222Rn-tracer method.

scholarly journals Analysis of a Regional Scale Chemical-Transport Model to Investigate the Potential Capability of Satellites for Identifying a Widespread Air Pollution Event

2017 ◽  
Author(s):  
Jason Welsh ◽  
Jack Fishman
Keyword(s):  
Transport Model ◽  
Regional Scale ◽  
Ozone Production ◽  
Metropolitan Region ◽  
Trace Gas ◽  
Chemical Transport Model ◽  
Satellite Measurements ◽  
Pollution Event ◽  
Surface O3 ◽  
Good Agreement

We use a regional scale photochemical transport model to investigate the surface concentrations and column integrated amounts of ozone (O3) and nitrogen dioxide (NO2) during a pollution event that occurred in the St. Louis metropolitan region in 2012. These trace gases will be two of the primary constituents that will be measured by TEMPO, an instrument on a geostationary platform, which will result in a dataset that has hourly temporal resolution during the daytime and ~4 km spatial resolution. Although air quality managers are most concerned with surface concentrations, satellite measurements provide a quantity that reflects a column amount, which may or may not be directly relatable to what is measured at the surface. The model results provide good agreement with observed surface O3 concentrations, which is the only trace gas dataset that can be used for verification. The model shows that a plume of O3 extends downwind from St. Louis and contains an integrated amount of ozone of ~ 16 DU (1 DU = 2.69 x 1016 mol. cm-2), a quantity that is two to three times lower than what was observed by satellite measurements during two massive pollution episodes in the 1980s. Based on the smaller isolatable emissions coming from St. Louis, this quantity is not unreasonable, but may also reflect the reduction of photochemical ozone production due to the implementation of emission controls that have gone into effect in the past few decades.

scholarly journals Atmospheric CO<sub>2</sub> modeling at the regional scale: an intercomparison of 5 meso-scale atmospheric models

2007 ◽  
Vol 4 (3) ◽  
pp. 1923-1952 ◽  
Author(s):  
C. Sarrat ◽  
J. Noilhan ◽  
A. J. Dolman ◽  
C. Gerbig ◽  
R. Ahmadov ◽  
...  
Keyword(s):  
Regional Scale ◽  
Potential Temperature ◽  
Surface Fluxes ◽  
Systematic Evaluation ◽  
Atmospheric Models ◽  
Experimental Protocol ◽  
Intercomparison Exercise ◽  
Meteorological Models ◽  
Meso Scale

Abstract. Atmospheric CO2 modeling in interaction with the surface fluxes, at the regional scale is developed within the frame of the European project CarboEurope-IP and its Regional Experiment component. In this context, five meso-scale meteorological models participate in an intercomparison exercise. Using a common experimental protocol that imposes a large number of rules, two days of the CarboEurope Regional Experiment Strategy (CERES) campaign are simulated. A systematic evaluation of the models is done in confrontation with the observations, using statistical tools and direct comparisons. Thus, temperature and relative humidity at 2 m, wind direction, surface energy and CO2 fluxes, vertical profiles of potential temperature as well as in-situ CO2 concentrations comparisons between observations and simulations are examined. This intercomparison exercise shows also the models ability to represent the meteorology and carbon cycling at the synoptic and regional scale in the boundary layer, but also points out some of the major shortcomings of the models.

Sign in / Sign up

Export Citation Format

Share Document