scholarly journals Characterisation of GOME-2 formaldehyde retrieval sensitivity

2012 ◽  
Vol 5 (5) ◽  
pp. 7095-7139
Author(s):  
W. Hewson ◽  
H. Bösch ◽  
M. P. Barkley ◽  
I. De Smedt

Abstract. Formaldehyde (HCHO) is an important tracer of tropospheric photochemistry, whose slant column abundance can be retrieved from satellite measurements of solar backscattered UV radiation, using differential absorption retrieval techniques. In this work a spectral fitting sensitivity analysis is conducted on HCHO slant columns retrieved from the Global Ozone Monitoring Experiment 2 (GOME-2) instrument. Despite quite different spectral fitting approaches, the retrieved HCHO slant columns have geographic distributions that generally match expected HCHO sources, though the slant column magnitudes and corresponding uncertainties are particularly sensitive to the retrieval set-up. The choice of spectral fitting window, polynomial order, I0 correction, and inclusion of minor absorbers tend to have the largest impact on the fit residuals. However, application of a reference sector correction using observations over the remote Pacific Ocean, is shown to largely homogenise the resulting HCHO vertical columns, thereby largely reducing any systematic erroneous spectral fitting.

2013 ◽  
Vol 6 (2) ◽  
pp. 371-386 ◽  
Author(s):  
W. Hewson ◽  
H. Bösch ◽  
M. P. Barkley ◽  
I. De Smedt

Abstract. Formaldehyde (CH2O) is an important tracer of tropospheric photochemistry, whose slant column abundance can be retrieved from satellite measurements of solar backscattered UV radiation, using differential absorption retrieval techniques. In this work a spectral fitting sensitivity analysis is conducted on CH2O slant columns retrieved from the Global Ozone Monitoring Experiment 2 (GOME-2) instrument. Despite quite different spectral fitting approaches, the retrieved CH2O slant columns have geographic distributions that generally match expected CH2O sources, though the slant column magnitudes and corresponding uncertainties are particularly sensitive to the retrieval set-up. The choice of spectral fitting window, polynomial order, I0 correction, and inclusion of minor absorbers tend to result in the largest modulations of retrieved slant column magnitude and fit quality. However, application of a reference sector correction using observations over the remote Pacific Ocean is shown to largely homogenise the resulting CH2O vertical columns obtained with different retrieval settings, thereby largely reducing any systematic error sources from spectral fitting.


2012 ◽  
Vol 5 (8) ◽  
pp. 2057-2068 ◽  
Author(s):  
A. Merlaud ◽  
M. Van Roozendael ◽  
J. van Gent ◽  
C. Fayt ◽  
J. Maes ◽  
...  

Abstract. We report on airborne Differential Optical Absorption Spectroscopy (DOAS) measurements of NO2 tropospheric columns above South Asia, the Arabic peninsula, North Africa, and Italy in November and December 2009. The DOAS instrument was installed on an ultralight aircraft involved in the Earth Challenge project, an expedition of seven pilots flying on four ultralight aircraft between Australia and Belgium. The instrument recorded spectra in limb geometry with a large field of view, a set-up which provides a high sensitivity to the boundary layer NO2 while minimizing the uncertainties related to the attitude variations. We compare our measurements with OMI (Ozone Monitoring Instrument) and GOME-2 (Global Ozone Monitoring Experiment 2) tropospheric NO2 products when the latter are available. Above Rajasthan and the Po Valley, two areas where the NO2 field is homogeneous, data sets agree very well. Our measurements in these areas are 0.1 ± 0.1 to 3 ± 1 × 1015 molec cm−2 and 2.6 ± 0.8 × 1016 molec cm−2, respectively. Flying downwind of Riyadh, our NO2 measurements show the structure of the megacity's exhaust plume with a higher spatial resolution than OMI. Moreover, our measurements are larger (up to 40%) than those seen by satellites. We also derived tropospheric columns when no satellite data were available if it was possible to get information on the visibility from satellite measurements of aerosol optical thickness. This experiment also provides a confirmation for the recent finding of a soil signature above desert.


Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 388
Author(s):  
Hao Cheng ◽  
Liang Sun ◽  
Jiagen Li

The extraction of physical information about the subsurface ocean from surface information obtained from satellite measurements is both important and challenging. We introduce a back-propagation neural network (BPNN) method to determine the subsurface temperature of the North Pacific Ocean by selecting the optimum input combination of sea surface parameters obtained from satellite measurements. In addition to sea surface height (SSH), sea surface temperature (SST), sea surface salinity (SSS) and sea surface wind (SSW), we also included the sea surface velocity (SSV) as a new component in our study. This allowed us to partially resolve the non-linear subsurface dynamics associated with advection, which improved the estimated results, especially in regions with strong currents. The accuracy of the estimated results was verified with reprocessed observational datasets. Our results show that the BPNN model can accurately estimate the subsurface (upper 1000 m) temperature of the North Pacific Ocean. The corresponding mean square errors were 0.868 and 0.802 using four (SSH, SST, SSS and SSW) and five (SSH, SST, SSS, SSW and SSV) input parameters and the average coefficients of determination were 0.952 and 0.967, respectively. The input of the SSV in addition to the SSH, SST, SSS and SSW therefore has a positive impact on the BPNN model and helps to improve the accuracy of the estimation. This study provides important technical support for retrieving thermal information about the ocean interior from surface satellite remote sensing observations, which will help to expand the scope of satellite measurements of the ocean.


2016 ◽  
Author(s):  
Can Li ◽  
Nickolay A. Krotkov ◽  
Simon Carn ◽  
Yan Zhang ◽  
Robert J. D. Spurr ◽  
...  

Abstract. Since the fall of 2004, the Ozone Monitoring Instrument (OMI) has been providing global monitoring of volcanic SO2 emissions, helping to understand their climate impacts and to mitigate aviation hazards. Here we introduce a new generation OMI volcanic SO2 dataset based on a principal component analysis (PCA) retrieval technique. To reduce retrieval noise and artifacts as seen in the current operational linear fit (LF) algorithm, the new algorithm, OMSO2VOLCANO, uses characteristic features extracted directly from OMI radiances in the spectral fitting, thereby helping to minimize interferences from various geophysical processes (e.g., O3 absorption) and measurement details (e.g., wavelength shift). To solve the problem of low bias for large SO2 total columns in the LF product, the OMSO2VOLCANO algorithm employs a table lookup approach to estimate SO2 Jacobians (i.e., the instrument sensitivity to a perturbation in the SO2 column amount) and iteratively adjusts the spectral fitting window to exclude shorter wavelengths where the SO2 absorption signals are saturated. To first order, the effects of clouds and aerosols are accounted for using a simple Lambertian equivalent reflectivity approach. As with the LF algorithm, OMSO2VOLCANO provides total column retrievals based on a set of pre-defined SO2 profiles from the lower troposphere to the lower stratosphere, including a new profile peaked at 13 km for plumes in the upper troposphere. Examples given in this study indicate that the new dataset shows significant improvement over the LF product, with at least 50 % reduction in retrieval noise over the remote Pacific. For large eruptions such as Kasatochi in 2008 (~ 1700 kt total SO2) and Sierra Negra in 2005 (> 1100 DU maximal SO2), OMSO2VOLCANO generally agrees well with other algorithms that also utilize the full spectral content of satellite measurements, while the LF algorithm tends to underestimate SO2. We also demonstrate that, despite the coarser spatial and spectral resolution of the Suomi National Polar-orbiting Partnership (Suomi-NPP) Ozone Mapping and Profiler Suite (OMPS) instrument, application of the new PCA algorithm to OMPS data produces highly consistent retrievals between OMI and OMPS. The new PCA algorithm is therefore capable of continuing the volcanic SO2 data record well into the future using current and future hyperspectral UV satellite instruments.


2015 ◽  
Vol 49 (1) ◽  
pp. 148-153 ◽  
Author(s):  
Xinping Yan ◽  
Xing Sun ◽  
Qizhi Yin

AbstractWith the introduction of energy efficiency operational indicator (EEOI) to inland river ships, a multiparameter sensitivity analysis method was proposed to analyze the parameters affecting the operational energy efficiency of inland river ships. On the basis of experimental data, a model based on a backpropagation artificial neural network (BP-ANN) for predicting the EEOI was set up. The accuracy of this predictive model was verified. On the basis of weights and threshold values of each variable parameter gained in the trained BP-ANN, a Garson algorithm was used for calculating the parameter sensitivity factors. Results showed that, besides the engine speed, the environment conditions would also play a big part in the operational energy efficiency of inland river ships. The conclusion provides a foundation for engaging the energy efficiency improvement strategies for inland river ships.


A little over two hundred years ago a number of serious and learned men in Copenhagen, London, Paris, St Petersbourg, Stockholm and elsewhere, men who were academicians, Fellows of the Royal Society, Lords of the Admiralty, politicians and the like, had been thinking seriously and learnedly about the behaviour of Venus, not, of course, about Venus as represented coldly and chastely by the marble statues being imported from Italy or more warmly in the paintings of Boucher and his contemporaries, but about her far distant planet which was calculated to pass across the disk of the Sun in 1769 and not to make another such transit until 1874. Observations of the 1769 transit at widely separated stations would provide, it was hoped, the means of calculating the distance of the Earth from the Sun. The Royal Society in London, having set up in November 1767 a sub-committee ‘to consider the places proper to observe the coming Transit of Venus’ and other particulars relevant to the same, presented a memorial to King George III outlining possible benefits to science and navigation from observations made in the Pacific Ocean and received in return the promise of £4000 and a suitable ship provided by the Royal Navy (8).


2000 ◽  
Vol 39 (36) ◽  
pp. 6847 ◽  
Author(s):  
Paolo Francesco Ambrico ◽  
Aldo Amodeo ◽  
Paolo Di Girolamo ◽  
Nicola Spinelli

2018 ◽  
Vol 15 (1) ◽  
pp. 172988141875910 ◽  
Author(s):  
Dongtao Xu

In order to improve the kinematic reliability, it is crucial to find out the influence of each error source on the kinematic reliability of the mechanism. Reliability sensitivity analysis is used to find the changing rate in the probability of reliability in relation to the changes in distribution parameters. Based on the structural response surface function method, the functional relation between the kinematic reliability of a modified Delta parallel mechanism and the original input-error vectors is described using the quadratic function with cross terms. Moreover, the partial derivatives of the functional relation with respect to the means and variances of the original input errors are derived, which can efficiently evaluate kinematic reliability sensitivity of the mechanism. The advantages of this method are as follows: First, the response surface function, which can be easily set up by the position-error model of the mechanism, is convenient for calculating the variance, partial derivative, and reliability sensitivity. Second, in this case (unlike in the traditional error-mapping model), although the input-error values are unknown, pseudorandom variables used as random input-error sources can be generated by MATLAB software. Furthermore, the kinematic reliability of the mechanism can be assessed using the Monte Carlo method.


2020 ◽  
Vol 5 (2) ◽  
pp. 202-207
Author(s):  
Eka Sudarmaji ◽  
Yuli Ardianto

This paper to set up an initial model in developing the model for Energy Saving Companies in Indonesia in assessing alternative financing for Energy Efficiency Saving in Indonesia. The reviewed for all the energy efficiency saving advantages cover the upfront investment costs are presented. The model is using the Analytic Hierarchy Process (AHP) and life cycle cost (LCC) analysis, with sensitivity analysis, is presented under possible a game-theory process. On some occasions, these alternative financing values are comparing to other similar investment returns as well as the risks


Sign in / Sign up

Export Citation Format

Share Document